Shanghai Euchips 12-24VDC 180-360W 0-10V/1-10V constant voltage dimmer DIM151A-DIN. This constant voltage dimmer supports 0-10v/1-10v active dimming and touch dim function.
Busty Desi⚡Call Girls in Surajpur Greater Noida >༒8448380779 Escort Service
constant voltage dimmer DIM151A-DIN
1. 0-10V/1-10V Rail Decoder Series DIM151A-DIN
Updated 2014-08-15 1 DIM151A-DIN SPEC V1.0
Feature
Support 0-10V/1-10V Active dimming.
Support Touch DIM function.
Support minimum brightness up-regulation function.
Support dimmer curve selection function.
More than kinds of functions can be selected by
switch please take the switch function tables as
reference.
Add hysteresis treatment, strengthen the
anti-interference.
Add fade effect, dimming smoother.
Support short circuit, over current protection and
alarm function.
Technical parameter
Model DIM151A-DIN
Input Voltage 12-24VDC
Input Signal 0-10V/1-10V( Active), Touch-DIM
Output Channels 1 Channel
Output Current 15A * 1channel, Max 15A
Output Power 180W(12V)/360W(24V)
Dimming output PWM
Dimming Range 0-100%
Installation Rail or Screw fixing
Install Rail TS-35/7.5 or TS-35/15
Product Size 112(L) *35 (W)*67(H)mm
Pack Size 354(L)*234(W)*232(H) mm; 60Pcs/6kg/Carton
G.W 85g
Work Temperature -30 ~ 50℃
2. 0-10V/1-10V Rail Decoder Series DIM151A-DIN
Updated 2014-08-15 2 DIM151A-DIN SPEC V1.0
Dimension
Interface introduction
(1) DIP switch, can select more than kinds of functions
(2) 0-10V/1-10V Signal input interface
(3) DC power supply
(4) Output port, connect LED lightings
3. 0-10V/1-10V Rail Decoder Series DIM151A-DIN
Updated 2014-08-15 3 DIM151A-DIN SPEC V1.0
Wiring Diagram
Switch Brightness Selection Table
DIP1 DIP2 Minimum brightness
valueON OFF ON OFF
√ √ 0%
√ √ 5%
√ √ 10%
√ √ 15%
Switch Function Selection Table
Analog Dim/Touch DIM Switch
ON OFF
DIP3 Touch DIM Analog DIM
Analog DIM Function
ON OFF
DIP4 1-10V 0-10V
DIP5 Logarithmic Linear
DIP6 Hysteresis Normal
Touch DIM function
1. Short press the Touch DIM switch (<0.5s) to control the lamp on or off.
2. Long press the Touch DIM switch (>0.5s) to dim the brightness of light. The dimming direction will
change every time after pressing switch.
4. 0-10V/1-10V Rail Decoder Series DIM151A-DIN
Updated 2014-08-15 4 DIM151A-DIN SPEC V1.0
3. When the light being turned off, long press the Touch DIM switch can turn on the light and adjust
the brightness according to the dimming direction.
4. The brightness adjustment range is 0%-100%, and the light can be turned off through short
pressing when doing the adjustment with long pressing Touch DIM switch
5. With the Power off memory function, the power-down state will be recovered when power on
again.
Cautions
1. This unit must be installed by a qualified electrician.
2. Please read the wiring diagram before installation.
3. Use suitable mounting tools to do the wiring and mounting.
4. Please check the connecting method is correct or not before connecting the power.