Caterpillar Cat 320D2L Excavator (Prefix XCC) Service Repair Manual (XCC00001...
Individual Training Record and Career Field Education and Training Plan
1. 1. IDENTIFICATION DATA
LAST NAME - FIRST NAME - MIDDLE INITIAL
Amn Reekie, David J
GRADE/RANK
Airman
DAFSC/JOB SERIES
2A631C
INDIVIDUAL TRAINING RECORD
PRIVACY ACT STATEMENT
Authority: Title 44 U.S.C 3101; Title 10 U.S.C. 8013 and E.O 9397
PRINCIPAL PURPOSE: Individual Training Records and all associated documents are used to document, monitor, and maintain a
comprehensive record of an individual's training.
ROUTINE USES OUTSIDE DOD: None
DISCLOSURE IS VOLUNTARY: the SSN is mandatory to make positive identification of the individual in relation to other personal
records and actions. Failure to provide information will jeopardize the ability of the unit to perform its assigned mission.
INDIVIDUAL'S SIGNATURE DATE
2016-04-13
Individual Training Record
2. Career Field Education and Training Plan (CFETP)
1. Tasks Knowledge
And Technical
References
2. Core
Tasks
3. Certification for OJT 4. Proficiency Codes Used to Indicate Training
A B C D E A 3-Skill Level B 5-Skill Level C 7-Skill Level
Tng Start Tng
Complete
Trainee
Initialst
Trainer
Initials
Certifier
Initials
(1) Crse (2) CDC (1) Crse (2) CDC QTP (1) Crse (2) CDC
2A5X1-007 001
AIRCRAFT GENERAL
2A5X1-007 001.007
Perform ground handling
2A5X1-007 001.007.012
Configuration operations
2A5X1-007 001.007.012.001
Support/stab strut for cargo
TR: TO 41-22-02, 04-4
2015-11-19 2016-03-28 DJR NPH - - - - - - -
2A5X1-007 009
ELECTRICAL SYSTEMS
2A5X1-007 009.006
Connect/disconnect external electrical
power
TR: TO 10-61-01
5 2016-03-21 2016-03-21 DJR BMP 3c - - - - - -
2A6X1-000 001
CFETP 2A6X1 - AEROSPACE
PROPULSION ATTACHMENT 2,
GENERAL PROPULSION 1 OCTOBER
2015
2A6X1-000 001.001
CAREER FIELD PROGRESSION
TR: AFI 36-2101
2016-02-04 2016-02-18 DJR JDE - - A - - - -
2A6X1-000 002
AF OCCUPATIONAL SAFETY AND
HEALTH (AFOSH) PROGRAM
TR: AFI 127-01 Vol. 1 and 3 AFIs
21-101, 91-202, 91-203, 91- 204,
90-802; and Applicable Aircraft/Engine
TOs
2A6X1-000 002.001
AFOSH Standards
2015-10-01 2015-11-03 DJR JDE A - B - - - -
2A6X1-000 002.002
Hazards of AFSC
2015-10-01 2015-11-03 DJR JDE A - B - - - -
2A6X1-000 002.003
Maintain Safe Work Area
2015-10-01 2015-11-03 DJR JDE 2b - c - - - -
2A6X1-000 002.004
Ensure Aircraft Safe for Maintenance
5 2015-12-01 2015-12-17 DJR AGA 1a - b - - - -
2A6X1-000 002.005
Restraint Harness (e.g., Fall protection
/prevention equipment)
2015-12-01 2015-12-17 DJR AGA - - B - - - -
2A6X1-000 002.006
Risk Management (RM)
2016-01-07 2016-02-04 DJR JDE A - - - - - -
2A6X1-000 002.007
Maintenance Resource Management
(MRM)
2016-01-07 2016-02-04 DJR JDE A - - - - - -
2A6X1-000 002.008
Maintenance Incident Prevention and
Investigation
2016-01-07 2016-02-04 DJR JDE - - - - - - -
2A6X1-000 003
OPERATIONS SECURITY (OPSEC)
VULNERABILITIES FOR AFSC
2A6X1(C/D/E/F/G)
TR: AFI 10-701
2016-01-07 2016-02-04 DJR JDE A - - - - - -
2A6X1-000 004
FOREIGN OBJECT DAMAGE (FOD)
PROGRAM
TR: AFI 21-101 and Applicable
MAJCOM Instructions
2A6X1-000 004.001
Apply FOD Prevention Practices
5 2015-12-01 2015-12-17 DJR AGA 2b - c - - - -
2A6X1-000 004.003
Dropped Object Prevention (DOP)
Program
2015-12-01 2015-12-17 DJR AGA A - - - - - -
2A6X1-000 005
HAZARDOUS MATERIALS AND
WASTE HANDLING ACCORDING TO
ENVIRONMENTAL STANDARDS
TR: AFI 90-821 and Applicable Federal,
State, Country and Local Regulations
2A6X1-000 005.001
Hazardous Materials Program
2015-10-01 2015-11-03 DJR JDE A - B - - - -
2A6X1-000 005.002
Types of Hazardous Materials/Fluids
2015-10-01 2015-11-03 DJR JDE A - B - - - -
2A6X1-000 005.003
Handling Procedures
2015-10-01 2015-11-03 DJR JDE A - B - - - -
2A6X1-000 005.005
Proper Disposal
2015-10-01 2015-11-03 DJR JDE A - B - - - -
2A6X1-000 006
ENLISTED SPECIALTY TRAINING
TR: AFI 36-2201 and Applicable
MAJCOM Directives
2A6X1-000 006.001
Trainee Responsibilities
2016-01-07 2016-01-14 DJR JDE - - - - - - -
2A6X1-000 006.002
OJT Trainer Responsibilities
2A6X1-000 006.002.002
Provide Trainee Theory and Train on
Actual Equipment
2016-01-07 2016-01-14 DJR JDE - - - - - - -
2A6X1-000 007
TECHNICAL PUBLICATIONS
TR: Interactive Electronic Technical
Manual System (IETMS) TOs
00-5-1and 00-5-15, and Applicable
3. Career Field Education and Training Plan (CFETP)
1. Tasks Knowledge
And Technical
References
2. Core
Tasks
3. Certification for OJT 4. Proficiency Codes Used to Indicate Training
A B C D E A 3-Skill Level B 5-Skill Level C 7-Skill Level
Tng Start Tng
Complete
Trainee
Initialst
Trainer
Initials
Certifier
Initials
(1) Crse (2) CDC (1) Crse (2) CDC QTP (1) Crse (2) CDC
Interactive Electronic Technical
Manuals (IMIS/TOD) TODCR
CHANGES REQUESTS
2A6X1-000 007.001
TO System
2015-10-01 2015-11-03 DJR JDE B - B - - - -
2A6X1-000 007.002
Use Technical Orders/Pubs (Include
Intermediate and Organizational level)
5 2015-10-01 2015-11-03 DJR JDE 2b - - - - - -
2A6X1-000 007.003
TCTOs
2015-12-01 2015-12-17 DJR AGA A - B - - - -
2A6X1-000 007.004
AFTO Form 22
2015-12-01 2015-12-17 DJR AGA A - B - - - -
2A6X1-000 008
SUPPLY MANAGEMENT
TR: AFIs 21-101 and 23-101, AFH
23-123, AFMAN 23-122, and TO
00-20-1
2A6X1-000 008.001
Maintenance Supply Concept
2016-02-04 2016-02-18 DJR JDE A - B - - - -
2A6X1-000 008.003
Use Status Tags
5 2016-02-04 2016-02-18 DJR JDE a - b - - - -
2A6X1-000 008.004
AF Form 2005
2016-02-04 2016-02-18 DJR JDE A - B - - - -
2A6X1-000 008.007
Priority System
2016-02-04 2016-02-18 DJR JDE A - B - - - -
2A6X1-000 008.008
Repair Cycle Assets
2016-02-04 2016-02-18 DJR JDE - - B - - - -
2A6X1-000 008.009
Shelf-Life Items Inspection and Control
2016-02-04 2016-02-18 DJR JDE A - B - - - -
2A6X1-000 008.010
Precious Metal Recovery
2016-01-07 2016-01-14 DJR JDE A - B - - - -
2A6X1-000 009
MAINTENANCE MANAGEMENT
TR: AFIs 21-101 and 10-201, TOs
00-20 Series, TO 2-1 18 and Applicable
MAJCOM Directives
2A6X1-000 009.001
Responsibilities of the Maintenance
Group
2016-01-14 2016-02-18 DJR JDE - - - - - - -
2A6X1-000 009.002
Functions within the Maintenance
Complex
2016-01-14 2016-02-18 DJR JDE - - A - - - -
2A6X1-000 009.005
Mobility
2016-01-14 2016-02-18 DJR JDE - - - - - - -
2A6X1-000 009.006
Maintenance Accountability
2016-01-14 2016-02-18 DJR JDE A - B - - - -
2A6X1-000 009.009
Use Land Mobile Radios (LMR)
2016-01-07 2016-02-04 DJR JDE - - - - - - -
2A6X1-000 010
MAINTENANCE INSPECTION
SYSTEMS AND FORMS
TR: AFCSM 21 Series, AFI 21-101;
TOs 00-20 Series, 00-35D-54;
Applicable Interactive Electronic
Technical Manuals and Applicable
MAJCOM Directives.
2A6X1-000 010.001
Inspections
2A6X1-000 010.001.002
Isochronal Inspections
2016-01-07 2016-03-08 DJR NPH A - B - - - -
2A6X1-000 010.001.003
Hourly Inspections
2016-01-14 2016-03-08 DJR NPH A - B - - - -
2A6X1-000 010.001.004
Special Inspections
2016-04-01 2016-04-01 DJR RPB A - B - - - -
2A6X1-000 010.001.005
Engine Acceptance Inspection
2016-04-01 2016-04-01 DJR RPB A - B - - - -
2A6X1-000 010.002
Maintenance Information Systems
(MIS)
2A6X1-000 010.002.002
Use Applicable MIS
5 2016-03-08 2016-03-28 DJR NPH - - - - - - -
2A6X1-000 010.003
Document Maintenance Actions
2A6X1-000 010.003.001
Use AFTO Form 350
5 2015-10-01 2016-01-14 DJR JDE 2b - b - - - -
2A6X1-000 010.003.002
Use AFTO Form 781 series (A,H,J,K)
5 2015-12-01 2015-12-17 DJR AGA 1a - - - - - -
2A6X1-000 010.003.003
Use AFTO Form 244/245
5 2015-10-01 2015-11-03 DJR JDE 2b - b - - - -
2A6X1-000 010.003.004
Deficiency Reporting System
2016-04-01 2016-04-01 DJR RPB - - A - - - -
2A6X1-000 010.003.006
Engine Work Folders /EAWP
2016-01-14 2016-02-04 DJR JDE - - - - - - -
2A6X1-000 010.003.007
Local Forms
2016-01-14 2016-03-08 DJR NPH - - - - - - -
2A6X1-000 011
HAND TOOLS
2A6X1-000 011.001
Select
5 2015-10-01 2015-11-03 DJR JDE 2b - - - - - -
2A6X1-000 011.002
Use
5 2015-10-01 2015-11-03 DJR JDE 2b - - - - - -
2A6X1-000 011.003
Inspect
2015-10-01 2015-11-03 DJR JDE 2b - b - - - -
4. Career Field Education and Training Plan (CFETP)
1. Tasks Knowledge
And Technical
References
2. Core
Tasks
3. Certification for OJT 4. Proficiency Codes Used to Indicate Training
A B C D E A 3-Skill Level B 5-Skill Level C 7-Skill Level
Tng Start Tng
Complete
Trainee
Initialst
Trainer
Initials
Certifier
Initials
(1) Crse (2) CDC (1) Crse (2) CDC QTP (1) Crse (2) CDC
2A6X1-000 011.004
Care
2015-10-01 2015-11-03 DJR JDE - - b - - - -
2A6X1-000 012
GENERAL MAINTENANCE
TR: TOs 1-1A-8, 1-1A-14, 2-1-111,
44B-1-15, and Applicable Interactive
Electronic Technical Manuals
2A6X1-000 012.001
Select Engine Hardware
5 2016-01-14 2016-02-04 DJR JDE 2b - c - - - -
2A6X1-000 012.002
Use Engine Hardware
5 2016-01-14 2016-02-04 DJR JDE 2b - c - - - -
2A6X1-000 012.003
Use Hardware Safety Devices
5 2016-01-14 2016-02-04 DJR JDE 2b - c - - - -
2A6X1-000 012.005
Proper Handling of Electrostatic
Discharge (ESD) Sensitive Devices
2015-12-01 2016-04-01 DJR BMP - - A - - - -
2A6X1-000 013
ELECTRICAL SYSTEMS
2A6X1-000 013.001
Electrical Fundamentals
2015-10-19 2015-11-03 DJR JDE A - B - - - -
2A6X1-000 013.002
Trace Wiring Diagrams, Circuits and
Schematics
2015-10-19 2016-03-28 DJR NPH - - b - - - -
2A6X1-000 013.003
Use Multimeters
5 2015-10-19 2016-03-28 DJR NPH 1a - b - - - -
2A6X1-000 014
ENGINE MAINTENANCE
TR: TOs 00-20-1, 00-35D 54, 1-1A-8,
2J-1-13, 2-1 111, and Applicable
Interactive Electronic Technical
Manuals
2A6X1-000 014.001
Perform Preliminary Maintenance
Procedures
2A6X1-000 014.001.001
Work Area
5 2015-10-19 2015-11-03 DJR JDE 2b - b - - - -
2A6X1-000 014.001.002
Support Equipment
5 2015-10-19 2015-11-03 DJR JDE 2b - b - - - -
2A6X1-000 014.001.003
Engine
5 2015-10-19 2015-11-03 DJR JDE 2b - b - - - -
2A6X1-000 014.002
Engine Plumbing
2A6X1-000 014.002.001
Remove
5 2015-10-19 2016-01-14 DJR JDE 2b - b - - - -
2A6X1-000 014.002.003
Install
5 2015-10-19 2016-01-14 DJR JDE 2b - b - - - -
2A6X1-000 015
SPECIAL/MEASURING TOOLS
TR: TOs 32-1-101, 32-1 201, and
Applicable Engine TOs
2A6X1-000 015.001
Depth Gauge
2A6X1-000 015.001.001
Select
2015-10-19 2015-11-03 DJR JDE 2b - b - - - -
2A6X1-000 015.001.002
Use
2015-10-19 2015-11-03 DJR JDE 2b - b - - - -
2A6X1-000 015.002
Micrometers
2A6X1-000 015.002.001
Select
2015-10-19 2015-11-03 DJR JDE 2b - b - - - -
2A6X1-000 015.002.002
Use
2015-10-19 2015-11-03 DJR JDE 2b - b - - - -
2A6X1-000 015.003
Torque Wrenches
2A6X1-000 015.003.001
Select
5 2015-10-01 2015-11-03 DJR JDE 2b - b - - - -
2A6X1-000 015.003.002
Use
5 2015-10-01 2015-11-03 DJR JDE 2b - b - - - -
2A6X1-000 015.004
Engine Fixtures/Tooling
2A6X1-000 015.004.001
Select
2015-10-19 2015-11-03 DJR JDE 2b - - - - - -
2A6X1-000 015.004.002
Use
2015-10-19 2015-11-03 DJR JDE 2b - - - - - -
2A6X1-000 016
TEST EQUIPMENT
TR: Applicable Engine TOs
2A6X1-000 016.001
Vibration Analyzer
- - - - - - -
2A6X1-000 017
SUPPORT EQUIPMENT
TR: TOs 35A4 Series, 35D3 Series,
35D4 Series, and Applicable Interactive
Electronic Technical Manuals
2A6X1-000 017.003
Personnel Stands
2A6X1-000 017.003.001
Inspect Prior to Use
2015-10-01 2015-11-03 DJR JDE 1a - b - - - -
2A6X1-000 017.003.002
Operate
2015-10-01 2015-11-03 DJR JDE 1a - b - - - -
2A6X1-000 017.004
Transportation Equipment
2A6X1-000 017.004.001 5 2015-10-19 2016-03-08 DJR NPH 1a - a - - - -
5. Career Field Education and Training Plan (CFETP)
1. Tasks Knowledge
And Technical
References
2. Core
Tasks
3. Certification for OJT 4. Proficiency Codes Used to Indicate Training
A B C D E A 3-Skill Level B 5-Skill Level C 7-Skill Level
Tng Start Tng
Complete
Trainee
Initialst
Trainer
Initials
Certifier
Initials
(1) Crse (2) CDC (1) Crse (2) CDC QTP (1) Crse (2) CDC
Inspect Prior to Use
2A6X1-000 017.004.002
Operate
2015-10-19 2016-03-08 DJR NPH 1a - - - - - -
2A6X1-000 017.006
Powered Support Equipment
2A6X1-000 017.006.001
General
2A6X1-000 017.006.001.001
Perform inspection
2016-01-14 2016-02-18 DJR JDE - - - - - - -
2A6X1-000 017.006.001.002
Operate Electrical Power Units (Gas
Turbine/ Diesel)
2015-10-19 2015-12-17 DJR AGA - - - - - - -
2A6X1-000 017.006.001.003
Operate Air Conditioner
2016-01-14 2016-02-18 DJR JDE - - - - - - -
2A6X1-000 017.006.001.004
Operate Foodlight Set
2016-01-14 2016-02-18 DJR JDE - - - - - - -
2A6X1-000 017.006.001.005
Operate Pneumatic Air Cart
2016-01-14 2016-02-18 DJR JDE - - - - - - -
2A6X1-000 017.006.001.007
Operate Portable Ground Heater
2016-01-14 2016-02-18 DJR JDE - - - - - - -
2A6X1-000 017.006.002
Compressor Wash Cart/Unit
2A6X1-000 017.006.002.001
Inspect Prior to Use
2015-12-01 2016-04-01 DJR BMP - - - - - - -
2A6X1-000 017.006.002.002
Operate
2015-12-01 2016-04-01 DJR BMP - - - - - - -
2A6X1-000 017.006.002.003
Maintain
2015-12-01 2016-04-01 DJR BMP - - - - - - -
2A6X1-000 018
ENGINE INSPECTION AND
PREVENTIVE MAINTENANCE
TR: AFI 21-131, TOs 00-20 Series,
33B4-2-29-1/11, 33-1-37 Series, and
Applicable Interactive Electronic
Technical Manuals
2A6X1-000 018.001
Analysis
2A6X1-000 018.001.001
Damage Analysis
- - B - - - -
2A6X1-000 018.001.002
Vibration Analysis
- - A - - - -
2A6X1-000 018.001.003
Oil Analysis Program (OAP) / Joint Oil
Analysis Program (JOAP)
A - B - - - -
2A6X1-000 018.001.004
Obtain Engine Oil Sample
a - - - - - -
2A6X1-000 018.002
Borescope
2A6X1-000 018.002.001
Fundamentals
2015-12-01 2016-04-01 DJR BMP A - B - - - -
2A6X1-000 018.002.002
Use Rigid
2015-12-01 2016-04-01 DJR BMP - - a - - - -
2A6X1-000 018.002.003
Use Flexible
2015-12-01 2016-04-01 DJR BMP - - a - - - -
2A6X1-000 019
ENGINE PRESERVATION SHIPMENT
AND STORAGE
TR: TOs 00-20-1, 00 85-20, 2J-1-18,
2-1-111, 6J3-1 12, and Applicable
Interactive Electronic Technical
Manuals
2A6X1-000 019.003
Engine/Module/Components
2A6X1-000 019.003.001
Preserve
5 2016-01-07 2016-02-18 DJR JDE a - a - - - -
2A6X1-000 019.003.002
De-preserve
2016-01-07 2016-02-18 DJR JDE a - a - - - -
2A6X1-000 019.003.003
Corrosion Control
2016-01-14 2016-02-18 DJR JDE - - B - - - -
2A6X1-000 020
AIRCRAFT INSTALLED ENGINE
TESTING
2A6X1-000 020.002
Perform Ground Observer/Fireguard
Duties
2015-10-19 2015-11-12 DJR JDE - - - - - - -
2A6X1-000 023
GENERAL
MAINTENANCE/PRODUCTION TEAM
MAINTENANCE TASKS
TR: AFI 91-203 and Applicable Aircraft
& Engine TOs
2A6X1-000 023.001
Perform Flight Line
Safety/Precautions/Security
Familiarization
2015-12-01 2015-12-17 DJR AGA - - - - - - -
2A6X1-000 023.001.0.2015293.162224
Organizational Level Technical Order
Familiarization
2015-12-01 2015-12-17 DJR AGA - - - - - - -
2A6X1-000 023.002
Introduction To Aircraft/Airframe
Familiarization/Egress
2015-12-01 2015-12-17 DJR AGA - - - - - - -
2A6X1-000 023.003
Operate Aircraft Radios
2015-12-01 2016-04-01 DJR BMP - - - - - - -
6. Career Field Education and Training Plan (CFETP)
1. Tasks Knowledge
And Technical
References
2. Core
Tasks
3. Certification for OJT 4. Proficiency Codes Used to Indicate Training
A B C D E A 3-Skill Level B 5-Skill Level C 7-Skill Level
Tng Start Tng
Complete
Trainee
Initialst
Trainer
Initials
Certifier
Initials
(1) Crse (2) CDC (1) Crse (2) CDC QTP (1) Crse (2) CDC
2A6X1-000 023.004
Statically Ground Aircraft
2015-10-19 2015-11-12 DJR JDE - - - - - - -
2A6X1-000 023.005
Perform Jacking Team Member
2016-01-07 2016-02-18 DJR JDE - - - - - - -
2A6X1-000 023.005.0.2015293.162224
Defensive Systems (DS) Familiarization
(On Applicable Aircraft)
2015-12-01 2015-12-17 DJR AGA - - - - - - -
2A6X1-000 023.006
Perform Refuel/Defuel Team Member
Duties
2015-12-01 2015-12-17 DJR AGA - - - - - - -
2A6X1-000 023.007
Remove/Install Aircraft Maintenance
Access Panels
2015-10-19 2015-12-17 DJR AGA - - - - - - -
2A6X1-000 023.007.0.2015293.162224
Apply/Disconnect External Electrical
Power Unit
2015-10-19 2015-11-12 DJR JDE - - - - - - -
2A6X1-000 023.008
Use Aircraft Interphone System
2015-12-01 2015-12-17 DJR AGA - - - - - - -
2A6X1-000 023.009
Perform Aircraft Marshaling Procedures
2015-12-01 2015-12-17 DJR AGA - - - - - - -
2A6X1-000 023.010
Perform Wing/Tail Walker Duties
2015-12-01 2015-12-17 DJR AGA - - - - - - -
2A6X1-000 023.011
Brake Operator
2015-12-01 2016-04-01 DJR BMP - - - - - - -
2A6X1-000 023.012
Perform Launch/Recovery Procedures
2015-12-01 2016-04-01 DJR BMP - - - - - - -
2A6X1-006 001
ENGINE INSPECTION AND
PREVENTIVE MAINTENANCE
TR: TOs 00-5-14, 00-20 Series, and
Applicable Aircraft/Engine TOs
2A6X1-006 001.001
Constructional Features
2015-12-01 2016-04-01 DJR BMP B - B - - - -
2A6X1-006 001.002
Engine Systems
2015-12-01 2016-04-01 DJR BMP B - - - - - -
2A6X1-006 001.003
Perform Inspections
2A6X1-006 001.003.003
Fan Exit Fairing
2016-03-08 2016-03-28 DJR NPH - - - - - - -
2A6X1-006 001.003.004
Clean Gas Turbine Aircraft Engines and
Associated Parts
2016-03-08 2016-03-28 DJR NPH - - - - - - -
2A6X1-006 001.003.005
Operate, Input/Retrieve/ Interpret Data
from Turbine/Engine Monitoring System
(Operate Caution, Warning and
Malfunction Display, etc.)
2016-03-08 2016-03-28 DJR NPH - - - - - - -
2A6X1-006 001.003.006
Remove and Replace Quick Access
Recording Disk
5 2016-02-04 2016-03-08 DJR NPH - - - - - - -
2A6X1-006 001.003.007
Service/Inspect Engine Oil System
5 2015-10-19 2015-11-12 DJR JDE - - - - - - -
2A6X1-006 001.003.008
Service/Inspect Engine Start System
5 2015-10-19 2016-02-04 DJR JDE - - - - - - -
2A6X1-006 001.003.009
Service/Inspect Engine IDG System
5 2015-10-19 2016-03-08 DJR NPH - - - - - - -
2A6X1-006 001.003.010
Fuselage Wing/ Access Entry
2016-03-08 2016-03-28 DJR NPH - - - - - - -
2A6X1-006 001.003.011
Fuselage Wing/Access Exit
2016-03-08 2016-03-28 DJR NPH - - - - - - -
2A6X1-006 001.003.012
Connect/Disconnect Exit Pneumatic Air
2016-03-08 2016-03-28 DJR NPH - - - - - - -
2A6X1-006 001.004
Operate
2A6X1-006 001.004.001
Flaps/Slats System
TR: TO 27JG-50-1
- - - - - - -
2A6X1-006 001.004.002
Multifunction Display System (MFD)
5 2016-01-14 2016-02-04 DJR JDE - - - - - - -
2A6X1-006 001.004.003
Visual Warning and Caution System
5 2016-01-14 2016-02-04 DJR JDE - - - - - - -
2A6X1-006 001.004.004
Mission Computer
5 2016-01-14 2016-02-04 DJR JDE - - - - - - -
2A6X1-006 001.004.005
Maintenance Monitor Panel to View and
Erase Faults
2016-01-14 2016-02-04 DJR JDE - - - - - - -
2A6X1-006 002
ENGINE MAINTENANCE
TR: TOs 00-20-1, 00-35D-54, 1-1A-8,
2J-1-13, 2-1-111, and Applicable
Aircraft/Engine TOs
2A6X1-006 002.001
Install Engine Water Wash Equipment
2016-01-07 2016-02-18 DJR JDE - - - - - - -
2A6X1-006 002.002
Cowl Door Support Rods
TR: TO 54JG-10-1
2A6X1-006 002.002.001
Remove
2015-10-19 2016-03-08 DJR NPH - - - - - - -
2A6X1-006 002.002.002
Install
2015-10-19 2016-03-08 DJR NPH - - - - - - -
2A6X1-006 002.003
Cowl Ice Protection Shut-Off Valve
TR: TO 30JG-20-1
19. JOB QUALIFICATION STANDARD CONTINUATION/WJQS
CRITICAL
TASKS
TASK NUMBER TASKS, KNOWLEDGE AND TECHNICAL REFERENCES CERTIFICATION
START DATE COMPLETION DATE TRAINEE'S
INITIALS
TRAINER'S
INITIALS
CERTIFIER'S
INITIALS
55091 001 Hanger Equipment
55091 001.001 Operate Hanger Power Unit Model KATO 2296000
55091
001.001.001
Operate Hanger Doors
TR: 62 AWI 21-14
2016-01-07 2016-01-14 DJR JDE
55091 002 Operate Diesel Powered MX Platform (split deck)
35-A4-2-60-1
55091 003 Operate gas powered MX platform (genie lift)
35A4-2-61-1
55091 004 Operate electrical powered MX platform (Simon Lift)
35A4-2-61-1
2016-01-07 2016-02-18 DJR JDE
55091 005 Operate Non Powered MX Platform
35-A4-2-60-1
2015-10-19 2015-11-12 DJR JDE
55091 006 Operate Engine Mezzanine stands
IAW Owner's manuals
2015-10-19 2016-01-07 DJR CD
55091 007 GS-1930 Scissor lift - Purpose and description
IAW Manufacturer's operating manual and current training plan
55091 008 GS-1930 Scissor lift - Perform pre-use inspection
IAW Manufacturer's operating manual and current training plan
55091 009 GS-1930 Scissor lift - Perform operation
IAW Manufacturer's operating manual and current training plan
55091 010 S-65 diesel boom lift - Purpose and description
IAW Manufacturer's operating manual and current training plan
55091 011 S-65 diesel boom lift - Perform pre-use inspection
IAW Manufacturer's operating manual and current training plan
55091 012 S-65 diesel boom lift - Perform operation
IAW Manufacturer's operating manual and current training plan
55091 014 C-17A Engines JQS
55091 014.001 Remove HPC ACC
IAW: 1C-17A-75JG-20-3 75-21-16-2
2015-12-01 2016-04-01 DJR BMP
55091
014.001.001
Install HPC ACC
IAW: 1C-17A-75JG-20-3 75-21-16-3
2015-12-01 2016-04-01 DJR BMP
55091 015 Inspect LPT cooling air duct
1C-17A-2-75JG-20-4, 1-1A-8
2016-03-08 2016-03-28 DJR NPH
55091 016 Install LPT cooling air duct
1C-17A-2-75JG-20-4
2016-03-08 2016-03-28 DJR NPH
55091 017 Remove LPT cooling air duct
1C-17A-2-75JG-20-4
2016-03-08 2016-03-28 DJR NPH
55091 018 Inspect stability control bleed valve seal
1C-17A-2-70GS-00-1, Para: 2-362A, and 2-362D
2016-03-08 2016-03-28 DJR NPH
55091 019 Install stability control bleed valve seal
1C-17A-2-75JG-30-1
2016-03-08 2016-03-28 DJR NPH
55091 020 Remove stability control bleed valve seal
1C-17A-2-75JG-30-1
2016-03-08 2016-03-28 DJR NPH
55091 021 Remove pylon lower fixed fairing
1C-17A-2-78JG-30-18
2015-12-01 2016-04-01 DJR BMP
55091 022 Inspect pylon lower fixed fairing
1C-17A-2-78JG-30-18 and 1C-17A-3-4
2015-12-01 2016-04-01 DJR BMP
55091 023 Install pylon lower fixed fairing
1C-17A-2-78JG-30-18
2015-12-01 2016-04-01 DJR BMP
55091 024 Install translating fairing
1C-17A-2-78JG-30-18
2015-10-19 2016-01-07 DJR CD
55091 025 Inspect translating fairing
1C-17A-2-78JG-30-18 and 1C-17A-3-4, 1C-17A-2-71GS-00-1, Para: 2-16G, 2-16K and
2-16L
2015-10-19 2016-01-07 DJR CD
55091 026 Remove translating fairing
1C-17A-2-78JG-30-18
2015-10-19 2016-01-07 DJR CD
55091 027 Remove HPC synchronizing ring runner (IGV stage, 6th, 7th,8th and 9th stages)
1C-17A-3-4 Para: 8-43
2015-12-01 2016-04-01 DJR BMP
55091 028 Inspect HPC synchronizing ring runner(IGV stage, 6th ,7th,8th, and 9th stages
1C-17A-2-70GS-00-1 Para: 2-188E 1C-17A-3-4 Para: 8-43
2015-12-01 2016-04-01 DJR BMP
55091 029 Install HPC synchronizing ring runner (IGV stage, 6th, 7th,8th and 9th stages)
1C-17A-3-4 Para: 8-43
2015-12-01 2016-04-01 DJR BMP
55091 030 Install fan duct retaining plate
1C-17A-2-72JG-30-1
2015-12-01 2016-04-01 DJR BMP
55091 031 Inspect fan duct retaining plate
1C-17A-2-72JG-30-1 and 1C-17A-2-70GS-00-1
2015-12-01 2016-04-01 DJR BMP
55091 032 Remove fan duct retaining plate
1C-17A-2-72JG-30-1
2015-12-01 2016-04-01 DJR BMP
55091 033 Install fan air seal ring assembly
1C-17A-2-36JG-10-9
2015-12-01 2016-04-01 DJR BMP
55091 034 Inspect fan air seal ring assembly
1C-17A-2-36JG-10-9, 1-1A-8
2015-12-01 2016-04-01 DJR BMP
55091 035 Removed Starter control valve
1C-17A-2-80JG-10-1
2015-12-01 2016-04-01 DJR BMP
55091 036 Install Starter control valve
1C-17A-2-80JG-10-1
2015-12-01 2016-04-01 DJR BMP
55091 037 Remove fan air seal ring assembly
1C-17A-2-36JG-10-9
2015-12-01 2016-04-01 DJR BMP
55091 038 Remove Engine Inlet Assembly
1C-17A-2-54JG-20-1
2015-12-01 2016-04-01 DJR BMP
55091 039 Install Engine Inlet Assembly
1C-17A-2-54JG-20-1
2015-12-01 2016-04-01 DJR BMP
55091 040 Remove Fan Duct Retractable Rod
1C-17A-2-78JG-30-8
2015-12-01 2016-04-01 DJR BMP
55091 041 Inspect Fan Duct Retractable Rod
1C-17A-2-78JG-30-8
2015-12-01 2016-04-01 DJR BMP
55091 042 Install Fan Duct Retractable Rod
1C-17A-2-78JG-30-8
2015-12-01 2016-04-01 DJR BMP
55091 043 Remove Engine Drain Mast Assembly
1C-17A-2-71JG-70-1
2015-12-01 2016-04-01 DJR BMP
55091 044 Inspect Engine Drain Mast Assembly
1C-17A-2-71JG-70-1
2015-12-01 2016-04-01 DJR BMP
55091 045 Install Engine Drain Mast Assembly
1C-17A-2-71JG-70-1
2015-12-01 2016-04-01 DJR BMP
20. JOURNAL ENTRIES
ENTRY
DATE
SUBJECT SIGNATURE INFO REMARKS
2015-09-24 Conduct Orientation/Initial
Evaluation
SSgt Penrod, Brock M
BMP
Amn Reekie, David J
DJR
Conduct and document an initial evaluation of trainee qualifications within 60 days
of initial assignment (120 days for ARC), either PCS or PCA. Document the evaluation
on AF Form 623a or automated version and file in the OJT record. As a minimum
the evaluation should include:
1. AFSC, duty position, core and HST, and deployment/UTC requirements.
2. CDC requirements. Note: 30 days per volume.
3. Formal/informal training requirements, such as skills, knowledge, or classroom instruction. Supervisors must evaluate technical
school graduates on all tasks taught in the initial skills course as identified in the STS portion of the CFETP.
4. Other local or unique training requirements.
5. Supervisor and trainee responsibilities as outlined in this AFI and other governing directives, such as AFI 36-2101 and the CFETP.
6. Supervisors are encouraged to allow trainees to complete course work during normal duty hours, if mission requirements allow.
Supervisors will monitor trainee progress to ensure timely completion of CDCs or ADL course work.
2015-09-25 Issued 2A651 CDC's SSgt Penrod, Brock M
BMP
Amn Reekie, David J
DJR
Amn Reekie was issued his 2A651 CDC's on 24 September 2015. He also understands the guidelines that the UTM gave him during
his CDC briefing.
2015-09-25 In-processing Interview MSgt Gleaton, Brant K
BKG
Amn Reekie, David J
DJR
A1C Reekie in-processed (62 MXS) on 24- SEP-15. Member's date arrived station (DAS) is 2-Sep-15.
This Initial UTM Interview was accomplished IAW AFI 36-2201, Air Force Training Program, Chapter 6, Unit Training Manager
Responsibilities, paragraph 6.6.6., to determine training status and CDC enrollment/progression requirements. Trainee's PAFSC,
CAFSC, 2AFSC and training status were verified/updated in TBA and MilPDS (as required).
TSC = B
DET = 2-Sep-15
PAFSC = 2A631C
CAFSC = 2A631C
A1C Reekie has a current CDC requirement or enrollment (address changed via MilPDS if enrolled). A1C Reekie is in UGT.
I have verified and assigned roles in TBA IAW the TBA Account Management Policy Letter, and as recommended by the member's
supervisor.
2015-09-25 Comprehensive Trainee Ori-
entation
MSgt Gleaton, Brant K
BKG
Amn Reekie, David J
DJR
IAW AFI 36-2201, Air Force Training Program, Chapter 6, Unit Training Manager Responsibilities, paragraph 6.6.8., a comprehensive
trainee orientation for trainees initially entering UGT is required within 60 days of assignment. The orientation was conducted on
24-Sep-15. The orientation covered all items listed in Attachment 10, GUIDE FOR CONDUCTING THE UNIT TRAINING MANAGER'S
(UTM) TRAINEE ORIENTATION.
2015-09-25 UTM CDC Briefing Nominee MSgt Gleaton, Brant K
BKG
Amn Reekie, David J
DJR
IAW AFI 36-2201, Chapter 6, paragraph 6.10., Table 6.1., and Attachment 10:
I have issued the CDC materials to the supervisor and trainee.
An inventory was conducted. All materials were accounted for and the edit code was verified as correct. The trainee, with assistance
from the supervisor, must make course corrections and pen/ink changes as needed. The supervisor will determine the CDC volume
sequence. The trainee will have no longer than 30 days per volume. If duty permits, time can be given to complete CDCs. However, it
is the trainee's responsibility to allocate off-duty time to complete and study CDC materials. The trainee must complete all Unit Review
Exercises (URE) and Self-Test questions. Once the volume is completed, the URE questions must be transferred to the "Field Scoring
Sheet". The supervisor will review missed questions and document the bottom of answer sheet prior to issuing the next volume.
2015-09-28 TBA Role(s) Request SSgt Penrod, Brock M
BMP
Amn Reekie, David J
DJR
Amn Reekie meets all the requirements to be assigned the following TBA role(s): TRAINEE and recommend the UTM assign the roles
upon verification of this entry
2015-09-28 CDC (2A651), Volume 1 is-
sued and course completion
timeline established
Amn Reekie, David J
DJR
SSgt Penrod, Brock M
BMP
Amn Reekie, David J has been issued volume 1 of 3 on 24-Sep-15, with a due date of
24-Oct-15, and an estimated course completion date of 24-Jan-16.
The TBA journal will be used to monitor course progression.
2015-09-30 Initial Evaluation Amn Reekie, David J
DJR
SSgt Burgo, Richard P
RPB
IAW AFI 36-2201, Air Force Training Program, Chapter 6, Supervisor, Trainer, Task Certifier, and Trainee Responsibilities, paragraph
6.7.1.14., the supervisor is responsible for conducting and documenting an initial evaluation of trainee qualifications within 60 days of
initial assignment, either PCS or PCA. Document the evaluation on AF Form 623a or automated version and file in the OJT record. The
evaluation included:
- AFSC, duty position (including core and home station training tasks), deployment/UTC, requirements.
- CDC requirements. NOTE: 30 days per volume.
- Formal/informal training requirements, such as skills, knowledge, or classroom instruction. Supervisors must evaluate technical
school graduates on all tasks taught in the initial skills course as identified in the STS portion of the CFETP.
- Other local or unique training requirements.
- Supervisor and trainee responsibilities as outlined in governing directives to include, but not limited to, AFIs 36-2101, 36-2201, and
the CFETP.
- Supervisors are encouraged to allow trainees to complete course work during normal duty hours, if mission requirements allow.
Supervisors will monitor trainee progress to ensure timely completion of CDCs or ADL course work.
The initial evaluation was conducted on 30 Sept 15.
2015-09-30 Work Center Orientation SSgt Burgo, Richard P
RPB
Amn Reekie, David J
DJR
IAW AFI 36-2201, Air Force Training Program, Chapter 6, Supervisor, Trainer, Task Certifier, and Trainee Responsibilities, paragraph
6.7.1.12., the supervisor is responsible for conducting and documenting a work center orientation within 60 days of assignment. The
orientation included:
- What the trainee will be doing.
- Duty hours and shifts, including periods of rest (non-duty time).
- Safety requirements found on the AF Form 55, Employee Safety and Health Record.
- All time and training requirements for upgrade and/or qualification training.
- Responsibilities of the trainee, trainer, task certifier (if applicable), quality assurance (QA), and supervisor.
The orientation was conducted on 30 Sept 15.
2015-10-02 Started Tasks Amn Reekie, David J
DJR
SSgt Mestre, Victor C
VCM
I have started Amn Reekie on several tasks today, 20151001.
2015-10-19 Started Tasks SSgt Mestre, Victor C
VCM
Amn Reekie, David J
DJR
I started Amn Reekie on several tasks today, 20151019.
2015-10-24 Subsequent CDC Volume Is-
sued 2 of 3
Amn Reekie, David J
DJR
SSgt Emer, Joshua D
JDE
Amn Reekie has completed volume 1's UREs with a score of 100% and Self-Test questions. Review training was completed. Volume 2
has been issued on 10-23-15, with a due date of 11-24-15.Trainee must complete all Unit Review Exercises (URE) and Self-Test
questions on issued volume.
2015-11-04 Completed Tasks SSgt Emer, Joshua D
JDE
Amn Reekie, David J
DJR
I signed Amn Reekie off on several tasks today, 20151103. He is progressing well.
2015-11-10 Subsequent CDC Volume Is-
sued 3 of 3
SSgt Emer, Joshua D
JDE
Amn Reekie, David J
DJR
Amn Reekie has completed volume 2's UREs with a score of 99% that was corrected to 100% and Self-Test questions. Review training
was completed. Volume 3 has been issued on 11-09-15, with a due date of 12-10-15.Trainee must complete all Unit Review Exercises
(URE) and Self-Test questions on issued volume.
2015-11-10 Fuel Injector and Support As-
sembly
TSgt Alvarado, George
GA
Amn Reekie, David J
DJR
On Nov 9, 2015, Amn Reekie was trained by SrA Hudson on removal and installation of fuel injector and support assembly. SrA
Hudson gave instructions per TO 1C-17A-2-73JG-10-1 and ran through a verbal tutorial of corresponding parts and procedures. No
tasks were signed off at this time.
2015-11-13 Completed Tasks Amn Reekie, David J
DJR
I have signed Amn Reekie off on several tasks today, 20151112. He is progressing well.
21. JOURNAL ENTRIES
ENTRY
DATE
SUBJECT SIGNATURE INFO REMARKS
SSgt Emer, Joshua D
JDE
2015-11-17 Translating Fairing Training... TSgt Alvarado, George
GA
Amn Reekie, David J
DJR
On 16 Nov 15, Amn Reekie was trained on translating fairing inspection and installation by SrA Brown. No tasks are signed off at this
time.
2015-11-20 Stabilizer Strut Training... TSgt Alvarado, George
GA
Amn Reekie, David J
DJR
On 19 Nov 15, Amn Reekie, was trained by TSgt. Vough from HSC concerning how to accomplish strut stabilization IAW
1C-17A-2-41JG-20-2. No tasks were signed off at this time. Awaiting tasks to be loaded in TBA.
2015-12-01 APU oil servicing... Amn Reekie, David J
DJR
TSgt Alvarado, George
GA
On 30 Nov 15, SSgt. Mestre trained Amn Reekie on oil servicing for APU. Training is going smoothly for Reekie and was able to
accomplish the task without any issues. No tasks were signed off at this time.
2015-12-04 QTP 01-17DEC2015 Amn Reekie, David J
DJR
TSgt DeLeon, Fidelio
R FRD
A1C Reekie is currently in QTP from 01-17Dec. His in-house training will resume when he returns.
2015-12-15 CDC Volume 3 Amn Reekie, David J
DJR
SSgt Emer, Joshua D
JDE
On 10 Dec 15 Amn Reekie completed Volume 3 exam with a score of 98%. Amn Reekie and SSgt. Emer reviewed missed questions
and corrected the answers to 100%. Projected EOC is January 14th 2015.
2015-12-18 completion of Phase 1 - PTM Amn Reekie, David J
DJR
SrA Arellano, Ariel G
AGA
Amn Reekie completed phase 1 - PTM. He has a great get it done safe, fast, and by the book mentality. Great Worker
2015-12-19 CDC practice test #1 Amn Reekie, David J
DJR
SSgt Emer, Joshua D
JDE
On 18 Dec 15, Amn Reekie took his first practice test in preparation for his EOC. Graded score was 76%. We overviewed missed
questions and corrected them to 100%. We also discussed study habits and future testing dates. Amn Reekie is aware of where he
should focus his attention and I am confident he will progress well.
2015-12-31 Break in Training Amn Reekie, David J
DJR
SSgt Emer, Joshua D
JDE
From 23 Dec 15 until 4 Jan 2016 there was a break in training due to Christmas Break. Study and training will recommence after 4 Jan
15. Amn Reekie will study on his own during this time and we will do a practice test upon his return from the break.
2016-01-08 task sign off/start dates WG-10 Dawson, Corey
CD
Amn Reekie, David J
DJR
i reviewed amn reekie's tba & signed him off on multiple tasks he's become proficient at & entered start dates on tasks he's began
training on.
corey dawson, wg10
2016-01-12 CDC Practice Test #2 Amn Reekie, David J
DJR
SSgt Emer, Joshua D
JDE
On 11 Jan 16, Amn Reekie took his second practice test in preparation for his EOC. Graded score was 83%. We reviewed missed
questions and corrected them to 100%. We also discussed study habits and future testing dates. Amn Reekie is aware of where he
should focus and needs more time to study.
2016-01-15 Started Tasks SSgt Emer, Joshua D
JDE
Amn Reekie, David J
DJR
I have started Amn Reekie on multiple tasks today.
2016-01-15 Completed Tasks SSgt Emer, Joshua D
JDE
Amn Reekie, David J
DJR
I have signed Amn Reekie off on several tasks today, 20160114. He is progressing well.
2016-01-23 CDC Practice Test #3 Amn Reekie, David J
DJR
SSgt Emer, Joshua D
JDE
On 26 Jan 16, AB Reekie took his third practice test in preparation for his EOC. Graded score was 92%. We reviewed missed
questions and corrected them to 100%. We also discussed his study habits and the need to schedule his EOC soon. AB Reekie is
aware of where he needs to focus and is progressing well.
2016-01-26 CDC Practice Test #4 SSgt Emer, Joshua D
JDE
Amn Reekie, David J
DJR
On 25 Jan 16, AB Reekie took his 4th practice test in preparation for his EOC. Graded score was 97%. We reviewed missed questions
and corrected them to 100%. His studying habits have improved and its showing in his test scores. I think he is almost ready for his
EOC
2016-02-02 CDC Practice Test #5 Amn Reekie, David J
DJR
SSgt Emer, Joshua D
JDE
On 01 Feb 16, AB Reekie took his 5th practice test in preparation for his EOC. Graded score was 95%. We reviewed missed questions
and corrected them to 100%. His studying habits have improved and its showing in his test scores.
2016-02-05 Completed Tasks Amn Reekie, David J
DJR
SSgt Emer, Joshua D
JDE
Amn Reekie has been signed off on multiple tasks today. He is progressing well.
2016-02-11 Volumes 1-3 Self test Ques-
tions
Amn Reekie, David J
DJR
SSgt Emer, Joshua D
JDE
On 9 Feb 16, I quizzed Amn Reekie on Self Test Questions from Volumes 1-3 of his 5 Level CDC's. Amn Reekie is retaining
information. I feel confident that he is ready to move on and test for his 5 level.
2016-02-11 CDC Comprehensive Review Amn Reekie, David J
DJR
SSgt Emer, Joshua D
JDE
IAW AFI 36-2201, Air Force Training Program, Chapter 6, Career Development Course (CDC) Program Management, Table 6.1., Line
7, a comprehensive review of the entire CDC with the trainee in preparation for the Course Examination (CE) was conducted on
02-Feb-16. I do recommend trainee to test.
2016-02-12 CDC Comprehensive Review TSgt Alvarado, George
GA
Amn Reekie, David J
DJR
IAW AFI 36-2201, Air Force Training Program, Chapter 6, Career Development Course (CDC) Program Management, Table 6.1., Line
7, a comprehensive review of the entire CDC with the trainee in preparation for the Course Examination (CE) was conducted on
11-Feb-16. I do recommend trainee to test.
2016-03-09 Task Qualifications Amn Reekie, David J
DJR
SrA Hudson, Nicholas
P NPH
Amn Reekie has been signed off on and qualified on 22 tasks that he has shown to be knowledgeable and proficient on. He has also
been started on multiple tasks and is working very diligently towards learning aircraft systems and parts. He should be able to get
these tasks signed off shortly.
2016-03-16 Break in Training Amn Reekie, David J
DJR
TSgt DeLeon, Fidelio
R FRD
Amn Reekie has injured his right hand putting him in a cast. He is on light duty and limited to what he can do maintenance wise. He is
on profile till 04-01-16. For now he will be doing what he can within his own capacity and according to his profile.
2016-03-16 Break in Training / Phase
2-QTP
TSgt DeLeon, Fidelio
R FRD
Amn Reekie, David J
DJR
On 02/29/16 Amn Reekie has attended the Phase 2 QTP training. On 03/02/16 he was pulled from the class for personal issues he
must attend to. He will continue his UGT training in shop and will be re-enrolled in Phase 2 once his personal matters are squared
away.
Note: For previous entry on his injured right hand (casted) the start date for incident was on 02/19/16.
2016-03-23 TSC P MSgt Gleaton, Brant K
BKG
Amn Reekie, David J
DJR
Member is being placed in TSC P due to his existing physical profile. His current profile is expected to last 6-8 weeks. AB Reekie's
current limitations prevent him from accomplishing Engine Phase II training, as well as performing his remaining hands-on maintenance
tasks required for upgrade to the 5-skill level . AB Reekie will be returned to TSC B upon his release of his profile.
2016-03-29 Task Completions Amn Reekie, David J
DJR
SrA Hudson, Nicholas
AB Reekie has shown the understanding and ability to learn and complete multiple tasks. As such, I have signed him off on many
tasks.
