Submit Search
Upload
Efisiensi biaya pada proses injection molding
•
0 likes
•
206 views
Bambang Afrinaldi
Follow
Efisiensi untuk mengurangi biaya produksi pada industri injection molding
Read less
Read more
Technology
Report
Share
Report
Share
1 of 4
Download now
Download to read offline
Recommended
Innovation is about creativity and the exploitation of creative ideas for value added outcomes.
Innovation For Powerful Outcomes
Innovation For Powerful Outcomes
Bambang Afrinaldi
Failure analysis of polyoxymethylene product using scanning electron microscope, thermal and processing analysis
Failure analysis of polyoxymethylene product using scanning electron microsco...
Failure analysis of polyoxymethylene product using scanning electron microsco...
Bambang Afrinaldi
New session school speech
New session school speech
Onkar Singh Shekhawat
Retour sur les bonnes pratiques pendant les temps forts sportifs de l'année : Roland Garros, Coupe du Monde de Rugby, préparation de l'Euro 2016...
Benchmark événements sportifs 2015
Benchmark événements sportifs 2015
HCDNEWS
E commerce (1)
E commerce (1)
sheikhumairpgc
Pengaruh konsentrasi inisiator dan komposisi styrene dan maleic anhydride terhadap berat molekul pada sintesis kopolimer poly(styrene maleic anhydride)
Pengaruh konsentrasi inisiator dan komposisi styrene dan maleic anhydride ter...
Pengaruh konsentrasi inisiator dan komposisi styrene dan maleic anhydride ter...
Bambang Afrinaldi
Incorporating multi wall carbon nanotube (MWCNT) into the polymer can improve the electrical properties of the nanocomposites. The effects of MWCNT on the electrical and rheological properties of polypropylene/MWCNT (PP/MWCNT) nanocomposites are investigated. The nanocomposites were prepared using melt mixing technique at chamber temperature of 180ºC and rotor rotation of 100 rpm for 10 minutes. Addition of MWCNT increases the electrical surface conductivity up to 10-7 S. The electrical percolation threshold of the nanocomposites is found to occur at 1.3 wt% MWCNT content. Viscosity of the nanocomposites increased with the addition of MWCNT. The rheological percolation threshold of the PP/MWCNT is found occur at 1.4 wt% MWCNT content. Well dispersion is observed by mean Scanning Electron Microscope (SEM) analysis.
Effect of multi wall carbon nanotube content on the electrical and rheologica...
Effect of multi wall carbon nanotube content on the electrical and rheologica...
Bambang Afrinaldi
Validasi metode untuk menjamin kualitas hasil analisis
Memahami metode validasi untuk menjamin hasil analisis yang handal
Memahami metode validasi untuk menjamin hasil analisis yang handal
Bambang Afrinaldi
Recommended
Innovation is about creativity and the exploitation of creative ideas for value added outcomes.
Innovation For Powerful Outcomes
Innovation For Powerful Outcomes
Bambang Afrinaldi
Failure analysis of polyoxymethylene product using scanning electron microscope, thermal and processing analysis
Failure analysis of polyoxymethylene product using scanning electron microsco...
Failure analysis of polyoxymethylene product using scanning electron microsco...
Bambang Afrinaldi
New session school speech
New session school speech
Onkar Singh Shekhawat
Retour sur les bonnes pratiques pendant les temps forts sportifs de l'année : Roland Garros, Coupe du Monde de Rugby, préparation de l'Euro 2016...
Benchmark événements sportifs 2015
Benchmark événements sportifs 2015
HCDNEWS
E commerce (1)
E commerce (1)
sheikhumairpgc
Pengaruh konsentrasi inisiator dan komposisi styrene dan maleic anhydride terhadap berat molekul pada sintesis kopolimer poly(styrene maleic anhydride)
Pengaruh konsentrasi inisiator dan komposisi styrene dan maleic anhydride ter...
Pengaruh konsentrasi inisiator dan komposisi styrene dan maleic anhydride ter...
Bambang Afrinaldi
Incorporating multi wall carbon nanotube (MWCNT) into the polymer can improve the electrical properties of the nanocomposites. The effects of MWCNT on the electrical and rheological properties of polypropylene/MWCNT (PP/MWCNT) nanocomposites are investigated. The nanocomposites were prepared using melt mixing technique at chamber temperature of 180ºC and rotor rotation of 100 rpm for 10 minutes. Addition of MWCNT increases the electrical surface conductivity up to 10-7 S. The electrical percolation threshold of the nanocomposites is found to occur at 1.3 wt% MWCNT content. Viscosity of the nanocomposites increased with the addition of MWCNT. The rheological percolation threshold of the PP/MWCNT is found occur at 1.4 wt% MWCNT content. Well dispersion is observed by mean Scanning Electron Microscope (SEM) analysis.
Effect of multi wall carbon nanotube content on the electrical and rheologica...
Effect of multi wall carbon nanotube content on the electrical and rheologica...
Bambang Afrinaldi
Validasi metode untuk menjamin kualitas hasil analisis
Memahami metode validasi untuk menjamin hasil analisis yang handal
Memahami metode validasi untuk menjamin hasil analisis yang handal
Bambang Afrinaldi
Some ideas to develop a product
How to create a product development in production
How to create a product development in production
Bambang Afrinaldi
Microscopy application on polymers
Microscopic examination
Microscopic examination
Bambang Afrinaldi
Failure Analysis
Failure analysis & test procedure #1 rev
Failure analysis & test procedure #1 rev
Bambang Afrinaldi
Plastic processing technique - A short information
Calendering
Calendering
Bambang Afrinaldi
Introduction of Atomic Force Microscopy (AFM)
Atomic Force Microscopy
Atomic Force Microscopy
Bambang Afrinaldi
L'Euro2016, le temps fort sportif de l'année incite les marques et enseignes à rivaliser d'ingéniosité pour capter l'attention des consommateurs. Quoi de mieux qu'une PLV innovante et impactante pour booster ses ventes !
L'oeil du Mobeye : qualifs en magasin pour l'Euro2016
L'oeil du Mobeye : qualifs en magasin pour l'Euro2016
HCDNEWS
Melt flow rate and melt viscosity measurement
Polymer Rheology
Polymer Rheology
Bambang Afrinaldi
New session school speech
New session school speech
Onkar Singh Shekhawat
Analisa kerusakan pada plastik dengan tinjauan penentuan secara visual dan dengan teknik spektroskopi (FTIR)
Analisa kerusakan pada plastik
Analisa kerusakan pada plastik
Bambang Afrinaldi
Process parameters are crucial to produce targeted qualities in polypropylene (PP)/clay nanocomposites, due to their roles on the generation of shear and diffusion. Thus, this research aims to observe their effects on structures and properties of PP/clay nanocomposites. Samples were produced by mixing PP, PP grafting maleic anhydride (PP-gMA), and Cloisite 20A at fixed compositions, 88/9/3 wt%, respectively, in an internal mixer with variations on temperatures (210, 220, 230 °C) and speeds (60, 80, 100 rpm). Effect of mixing parameters on nanocomposite structures and properties were investigated from XRD, SEM and flexural properties. The results showed that all samples had intercalated as well as agglomerated structures. Further analysis on XRD and SEM showed that samples produced at high conditions (230C or 100 rpm) had similar structures. In contrast, low setting sample (210C and 60 rpm), despite its similarity on dispersion level, had longer agglomerates than that of mixed at high settings. Correlated both increase of d-spacing and agglomerates length to flexural properties suggested that modulus was more influenced by dispersion level, while strength was affected by agglomerates. However, it was worth to note that improvement on dspacing, with availability of long agglomerates might not guarantee modulus and strength improvement due to low interfacial bonding.
The roles of process parameters on structures and mechanical properties of po...
The roles of process parameters on structures and mechanical properties of po...
Bambang Afrinaldi
Tinjauan umum, kondisi pasar, permasalahan dan tantangan polimer komposit
Polimer Komposit
Polimer Komposit
Bambang Afrinaldi
Karakter rheologi pada nanokomposit polipropilen/mwcnt/organoclay
Reologi nanokomposit polipropilen/mwcnt/organoclay
Reologi nanokomposit polipropilen/mwcnt/organoclay
Bambang Afrinaldi
Penggunaan carbon nanotube untuk aplikasi material polimer antistatik
Penggunaan carbon nanotube untuk aplikasi material polimer antistatik 1
Penggunaan carbon nanotube untuk aplikasi material polimer antistatik 1
Bambang Afrinaldi
Sekilas mengenai estimasi ketidakpastian pengukuran.
Sekilas mengenai estimasi ketidakpastian pengukuran
Sekilas mengenai estimasi ketidakpastian pengukuran
Bambang Afrinaldi
Cara melakukan efisiensi energi pada industri plastik
Efisiensi energi pada industri plastik
Efisiensi energi pada industri plastik
Bambang Afrinaldi
More Related Content
Viewers also liked
Some ideas to develop a product
How to create a product development in production
How to create a product development in production
Bambang Afrinaldi
Microscopy application on polymers
Microscopic examination
Microscopic examination
Bambang Afrinaldi
Failure Analysis
Failure analysis & test procedure #1 rev
Failure analysis & test procedure #1 rev
Bambang Afrinaldi
Plastic processing technique - A short information
Calendering
Calendering
Bambang Afrinaldi
Introduction of Atomic Force Microscopy (AFM)
Atomic Force Microscopy
Atomic Force Microscopy
Bambang Afrinaldi
L'Euro2016, le temps fort sportif de l'année incite les marques et enseignes à rivaliser d'ingéniosité pour capter l'attention des consommateurs. Quoi de mieux qu'une PLV innovante et impactante pour booster ses ventes !
L'oeil du Mobeye : qualifs en magasin pour l'Euro2016
L'oeil du Mobeye : qualifs en magasin pour l'Euro2016
HCDNEWS
Melt flow rate and melt viscosity measurement
Polymer Rheology
Polymer Rheology
Bambang Afrinaldi
New session school speech
New session school speech
Onkar Singh Shekhawat
Viewers also liked
(8)
How to create a product development in production
How to create a product development in production
Microscopic examination
Microscopic examination
Failure analysis & test procedure #1 rev
Failure analysis & test procedure #1 rev
Calendering
Calendering
Atomic Force Microscopy
Atomic Force Microscopy
L'oeil du Mobeye : qualifs en magasin pour l'Euro2016
L'oeil du Mobeye : qualifs en magasin pour l'Euro2016
Polymer Rheology
Polymer Rheology
New session school speech
New session school speech
More from Bambang Afrinaldi
Analisa kerusakan pada plastik dengan tinjauan penentuan secara visual dan dengan teknik spektroskopi (FTIR)
Analisa kerusakan pada plastik
Analisa kerusakan pada plastik
Bambang Afrinaldi
Process parameters are crucial to produce targeted qualities in polypropylene (PP)/clay nanocomposites, due to their roles on the generation of shear and diffusion. Thus, this research aims to observe their effects on structures and properties of PP/clay nanocomposites. Samples were produced by mixing PP, PP grafting maleic anhydride (PP-gMA), and Cloisite 20A at fixed compositions, 88/9/3 wt%, respectively, in an internal mixer with variations on temperatures (210, 220, 230 °C) and speeds (60, 80, 100 rpm). Effect of mixing parameters on nanocomposite structures and properties were investigated from XRD, SEM and flexural properties. The results showed that all samples had intercalated as well as agglomerated structures. Further analysis on XRD and SEM showed that samples produced at high conditions (230C or 100 rpm) had similar structures. In contrast, low setting sample (210C and 60 rpm), despite its similarity on dispersion level, had longer agglomerates than that of mixed at high settings. Correlated both increase of d-spacing and agglomerates length to flexural properties suggested that modulus was more influenced by dispersion level, while strength was affected by agglomerates. However, it was worth to note that improvement on dspacing, with availability of long agglomerates might not guarantee modulus and strength improvement due to low interfacial bonding.
The roles of process parameters on structures and mechanical properties of po...
The roles of process parameters on structures and mechanical properties of po...
Bambang Afrinaldi
Tinjauan umum, kondisi pasar, permasalahan dan tantangan polimer komposit
Polimer Komposit
Polimer Komposit
Bambang Afrinaldi
Karakter rheologi pada nanokomposit polipropilen/mwcnt/organoclay
Reologi nanokomposit polipropilen/mwcnt/organoclay
Reologi nanokomposit polipropilen/mwcnt/organoclay
Bambang Afrinaldi
Penggunaan carbon nanotube untuk aplikasi material polimer antistatik
Penggunaan carbon nanotube untuk aplikasi material polimer antistatik 1
Penggunaan carbon nanotube untuk aplikasi material polimer antistatik 1
Bambang Afrinaldi
Sekilas mengenai estimasi ketidakpastian pengukuran.
Sekilas mengenai estimasi ketidakpastian pengukuran
Sekilas mengenai estimasi ketidakpastian pengukuran
Bambang Afrinaldi
Cara melakukan efisiensi energi pada industri plastik
Efisiensi energi pada industri plastik
Efisiensi energi pada industri plastik
Bambang Afrinaldi
More from Bambang Afrinaldi
(7)
Analisa kerusakan pada plastik
Analisa kerusakan pada plastik
The roles of process parameters on structures and mechanical properties of po...
The roles of process parameters on structures and mechanical properties of po...
Polimer Komposit
Polimer Komposit
Reologi nanokomposit polipropilen/mwcnt/organoclay
Reologi nanokomposit polipropilen/mwcnt/organoclay
Penggunaan carbon nanotube untuk aplikasi material polimer antistatik 1
Penggunaan carbon nanotube untuk aplikasi material polimer antistatik 1
Sekilas mengenai estimasi ketidakpastian pengukuran
Sekilas mengenai estimasi ketidakpastian pengukuran
Efisiensi energi pada industri plastik
Efisiensi energi pada industri plastik
Download now
