Wenzhou Qili Fluid Equipment Co., Ltd. is authorized to apply the 3-A Symbol to their models of sanitary fittings made of 304, 304L, 316, 316L stainless steel, including ferrules, weld fittings, and clamp fittings, through December 31, 2015. This authorization is based on the company voluntarily certifying that the equipment complies with 3-A Sanitary Standard Number 63-03 for Sanitary Fittings. The next third party verification inspection and report are due in July 2020.

1. ISSUE DATE: AUGUST 03, 2015 CERTIFICATE AUTHORIZATION NUMBER: 1826
THIS IS TO CERTIFY THAT
Wenzhou Qili Fluid Equipment Co., Ltd.
3839#-1 Three Road Binhai Development Zone Wenzhou, Zhejiang 325000 CHINA
is hereby authorized to continue to apply the
3-A Symbol to the models of equipment, conforming to 3-A Sanitary Standards for:
Number 63-03
Sanitary Fittings
set forth below
Both CIP and COP Models: Fittings in 304, 304L, 316, 316L stainless steel, including
the following types: 304, 304L, 316, 316L, 3A- Ferrules: 14WMP, 14MMP, 14AMP
(0.5"-12"), 14MPHT (0.5"-6"), 14MPW (1"-8"), 14TRF (1"-4"), 14WLMP (0.5"-12"),
14WLI (1"-4"), 14MPHR (0.5"-6"), 14WI (1"-4"), 15TRF (1"-4"), 15WLI (1"-4"),
15WI (1"-4"), 16AMP (0.5"-12"), 16A (1"-4"), 16AI-15I (1"-8"), 16AI 14I (1"-8"),
19MPX (1"-6"); Fittings -Weld: Conc Red (1.5"x1"-4"x3"), Ecc Red (1.5"x1"-4"x3"),
U Tee (1"x0.5"-2.5"x1"), Cross (0.5"-4"), Tee (1"-4"), Tee Instr (0.75"-4"), 45
degree El Shrt (1"-4"), 45 degree El Long (1"-4"), 90 degree El Shrt (1"-4"), 90
degree El Long (0.5"-4"), Tee Red (1.5"x1"-4"x3"); Fittings -Clamp: Tee (0.5"-4"),
90 degree El (1"-4"), 45 degree El (1"-4"), Cross (0.5"-4"), Red Conc
(1.5"x1"-4"x3"), Red Ecc (1.5"x1"-4"x3").
VALID THROUGH: December 31, 2015
Timothy R. Rugh
Executive Director
3-A Sanitary Standards, Inc.
The issuance of this authorization for the use of the 3-A Symbol is based upon the voluntary
certification, by the applicant for it, that the equipment listed above complies fully with the 3-A
Sanitary Standards designated. Legal responsibility for compliance is solely that of the holder of
this Certificate of Authorization, and 3-A Sanitary Standards, Inc. does not warrant that the
holder of an authorization at all times complies with the provisions of the said 3-A Sanitary
Standard. This in no way affects the responsibility of 3-A Sanitary Standards, Inc. to take
appropriate action in such cases in which evidence of nonconformance had been established.
NEXT TPV INSPECTION/REPORT DUE: July 2020
-