This service manual for the 267B CATERPILLAR MULTI TERRAIN LOADER offers comprehensive repair and maintenance information for all models and components. It contains detailed instructions and step-by-step diagrams to ensure you perform efficient service and troubleshooting on your loader. Download the PDF file for quick access to the manual.

1. SERVICE REPAIR
MANUAL
267B MULTI TERRAIN LOADER
Serial No. CYC
PRINTED BY |
WWW.MANUALLABS.COM

2. Previous Screen
Shutdown SIS
Media Number -RENR4883-01 Publication Date -01/11/2009
Product: MULTI TERRAIN LOADER
Model: 267B MULTI TERRAIN LOADER CYC
Configuration: 267B, 277B and 287B Multi Terrain Loader CYC00001-UP (MACHINE) POWERED BY 3044C Engine
Date Updated -17/11/2009
i 02049815
Disassembly and Assembly
267B, 277B and 287B Multi Terrain Loaders Engine Supplement
Removal Procedure
Air Cleaner - Remove and Install
SMCS - 1051-010
1.Tilt the radiator. Refer to Operation and Maintenance Manual, "Radiator Tilting".

3. Illustration 1 g01038364
2.Disconnect harness assembly (1) .

4. Illustration 2 g01038365
3.Release clamps (2). Remove cover (3) for the air cleaner.

5. Illustration 3
Illustration 4
g01038368
g01038369
4.Remove primary air cleaner (4) and secondary air cleaner (5) .

6. Illustration 5 g01038372
5.Remove bolt (6) and move fuse (7) out of the way.

7. Illustration 6
Illustration 7
g01038385
g01038385
1. Install air cleaner housing (11) and install bolts (10). Connect hose (9) and tighten clamp (8) .
6.Loosen clamp (8) and disconnect hose (9). Remove bolts (10) and remove air cleaner housing
(11) .
Installation Procedure

8. Illustration 8 g01038372
2.Move fuse (7) into position and install bolt (6) .

9. Illustration 9
Illustration 10 g01038368
g01038369
3. Install secondary air cleaner (5) and install primary air cleaner (4) .

10. Illustration 11 g01038365
4. Install cover (3) for the air cleaner. Secure clamps (2) .

11. Illustration 12 g01038364
5.Connect harness assembly (1) .
6.Tilt the radiator back to the original position. Refer to Operation and Maintenance Manual,
"Radiator Tilting".
Copyright 1993 - 2023 Caterpillar Inc.
All Rights Reserved.
Private Network For SIS Licensees.
Sat Sep 16 23:13:05 UTC+0530 2023

12. Previous Screen
Shutdown SIS
Media Number -RENR7582-07 Publication Date -01/01/2010
Product: MULTI TERRAIN LOADER
Model: 267B MULTI TERRAIN LOADER CYC
Configuration: 267B, 277B and 287B Multi Terrain Loader CYC00001-UP (MACHINE) POWERED BY 3044C Engine
Date Updated -26/02/2010
i 02003443
Disassembly and Assembly
3044C Industrial Engine and Engines for Caterpillar Built Machines
Removal Procedure
Exhaust Manifold - Remove and Install
SMCS - 1059-010
Hot engine components can cause injury from burns. Before
performing maintenance on the engine, allow the engine and the
components to cool.
Keep all parts clean from contaminants.
Contaminants may cause rapid wear and shortened component life.
Start By:
A.Remove the turbocharger, if equipped. Refer to Disassembly and Assembly, "Turbocharger -
Remove".
NOTICE

13. Illustration 1
Illustration 2
g01036153
g01036153
1.Remove bolts (1). Remove exhaust manifold (3) and gasket (2) .
Keep all parts clean from contaminants.
Contaminants may cause rapid wear and shortened component life.
1.Install gasket (2) and exhaust manifold (3). Install bolts (1). Tighten the bolts, beginning at the
center of the exhaust manifold and working toward the ends, to the following torque:
Naturally aspirated engines ... 15 to 22 N·m (11 to 16 lb ft)
Installation Procedure
NOTICE

14. Turbocharged engines ... 28 to 33 N·m (21 to 24 lb ft)
End By: Install the turbocharger, if equipped. Refer to Disassembly and Assembly, "Turbocharger -
Install".
Copyright 1993 - 2023 Caterpillar Inc.
All Rights Reserved.
Private Network For SIS Licensees.
Sat Sep 16 23:14:37 UTC+0530 2023

15. Previous Screen
Shutdown SIS
Media Number -RENR7582-07 Publication Date -01/01/2010
Product: MULTI TERRAIN LOADER
Model: 267B MULTI TERRAIN LOADER CYC
Configuration: 267B, 277B and 287B Multi Terrain Loader CYC00001-UP (MACHINE) POWERED BY 3044C Engine
Date Updated -26/02/2010
i 02001104
Disassembly and Assembly
3044C Industrial Engine and Engines for Caterpillar Built Machines
Removal Procedure
Inlet Manifold - Remove
SMCS - 1058-011
Keep all parts clean from contaminants.
Contaminants may cause rapid wear and shortened component life.
Table 1
Required Tools
ToolPart NumberPart DescriptionQty
9U-7087 Tapered Cap/Plug 1
ZZ
9U-7089 Tapered Cap/Plug 1
Note: SERVICE DATA: TOOLING (ZZ) WILL NOT BE IDENTIFIED IN PHOTOGRAPHS
IN THE REMOVAL OR THE INSTALLATION. THIS TOOLING IS SHOWN IN ORDER
TO ASSIST THE EXPERIENCED SERVICEMAN.
NOTICE

16. Illustration 1
Illustration 2
g01035474
g01035495
1.Remove bolts (6) and position crankcase breather (8) out of the way. Loosen clamp (7) and
disconnect the hose assembly. Remove bolts (4) and (5). Remove bolts (1). Remove inlet
manifold (2) and gasket (3) .
2.Remove bolt (9) and bracket (10). Remove bolts (11). Remove elbow assembly (12) and gasket
(13) .
Copyright 1993 - 2023 Caterpillar Inc.
All Rights Reserved.
Private Network For SIS Licensees.
Sat Sep 16 23:16:59 UTC+0530 2023

17. Previous Screen
Shutdown SIS
Media Number -RENR7582-07 Publication Date -01/01/2010
Product: MULTI TERRAIN LOADER
Model: 267B MULTI TERRAIN LOADER CYC
Configuration: 267B, 277B and 287B Multi Terrain Loader CYC00001-UP (MACHINE) POWERED BY 3044C Engine
Date Updated -26/02/2010
i 02003443
Disassembly and Assembly
3044C Industrial Engine and Engines for Caterpillar Built Machines
Removal Procedure
Exhaust Manifold - Remove and Install
SMCS - 1059-010
Hot engine components can cause injury from burns. Before
performing maintenance on the engine, allow the engine and the
components to cool.
Keep all parts clean from contaminants.
Contaminants may cause rapid wear and shortened component life.
Start By:
A.Remove the turbocharger, if equipped. Refer to Disassembly and Assembly, "Turbocharger -
Remove".
NOTICE

18. Illustration 1
Illustration 2
g01036153
g01036153
1.Remove bolts (1). Remove exhaust manifold (3) and gasket (2) .
Keep all parts clean from contaminants.
Contaminants may cause rapid wear and shortened component life.
1.Install gasket (2) and exhaust manifold (3). Install bolts (1). Tighten the bolts, beginning at the
center of the exhaust manifold and working toward the ends, to the following torque:
Naturally aspirated engines ... 15 to 22 N·m (11 to 16 lb ft)
Installation Procedure
NOTICE

19. Turbocharged engines ... 28 to 33 N·m (21 to 24 lb ft)
End By: Install the turbocharger, if equipped. Refer to Disassembly and Assembly, "Turbocharger -
Install".
Copyright 1993 - 2023 Caterpillar Inc.
All Rights Reserved.
Private Network For SIS Licensees.
Sat Sep 16 23:13:29 UTC+0530 2023

20. Previous Screen
Shutdown SIS
Media Number -RENR7582-07 Publication Date -01/01/2010
Product: MULTI TERRAIN LOADER
Model: 267B MULTI TERRAIN LOADER CYC
Configuration: 267B, 277B and 287B Multi Terrain Loader CYC00001-UP (MACHINE) POWERED BY 3044C Engine
Date Updated -26/02/2010
i 02001241
Disassembly and Assembly
3044C Industrial Engine and Engines for Caterpillar Built Machines
Installation Procedure
Inlet Manifold - Install
SMCS - 1058-012
Keep all parts clean from contaminants.
Contaminants may cause rapid wear and shortened component life.
NOTICE
Illustration 1 g01035495

21. 1.
2.Install gasket (3) and position inlet manifold (2). Install bolts (1). Install bolts (4) and (5).
Connect the hose assembly and tighten clamp (7). Position crankcase breather (8) and install
bolts (6) .
Install gasket (13) and elbow assembly (12). Install bolts (11). Install bracket (10) and bolt (9) .
Illustration 2 g01035474
Copyright 1993 - 2023 Caterpillar Inc.
All Rights Reserved.
Private Network For SIS Licensees.
Sat Sep 16 23:20:03 UTC+0530 2023

22. Previous Screen
Shutdown SIS
Media Number -RENR7582-07 Publication Date -01/01/2010
Product: MULTI TERRAIN LOADER
Model: 267B MULTI TERRAIN LOADER CYC
Configuration: 267B, 277B and 287B Multi Terrain Loader CYC00001-UP (MACHINE) POWERED BY 3044C Engine
Date Updated -26/02/2010
i 02001104
Disassembly and Assembly
3044C Industrial Engine and Engines for Caterpillar Built Machines
Removal Procedure
Inlet Manifold - Remove
SMCS - 1058-011
Keep all parts clean from contaminants.
Contaminants may cause rapid wear and shortened component life.
Table 1
Required Tools
ToolPart NumberPart DescriptionQty
9U-7087 Tapered Cap/Plug 1
ZZ
9U-7089 Tapered Cap/Plug 1
Note: SERVICE DATA: TOOLING (ZZ) WILL NOT BE IDENTIFIED IN PHOTOGRAPHS
IN THE REMOVAL OR THE INSTALLATION. THIS TOOLING IS SHOWN IN ORDER
TO ASSIST THE EXPERIENCED SERVICEMAN.
NOTICE

23. Illustration 1
Illustration 2
g01035474
g01035495
1.Remove bolts (6) and position crankcase breather (8) out of the way. Loosen clamp (7) and
disconnect the hose assembly. Remove bolts (4) and (5). Remove bolts (1). Remove inlet
manifold (2) and gasket (3) .
2.Remove bolt (9) and bracket (10). Remove bolts (11). Remove elbow assembly (12) and gasket
(13) .
Copyright 1993 - 2023 Caterpillar Inc.
All Rights Reserved.
Private Network For SIS Licensees.
Sat Sep 16 23:19:40 UTC+0530 2023

24. Previous Screen
Shutdown SIS
Media Number -RENR4883-01 Publication Date -01/11/2009
Product: MULTI TERRAIN LOADER
Model: 267B MULTI TERRAIN LOADER CYC
Configuration: 267B, 277B and 287B Multi Terrain Loader CYC00001-UP (MACHINE) POWERED BY 3044C Engine
Date Updated -17/11/2009
i 02047153
Disassembly and Assembly
267B, 277B and 287B Multi Terrain Loaders Engine Supplement
Removal Procedure
Muffler - Remove and Install
SMCS - 1062-010

25. Illustration 1
Illustration 2
g01041430
g01051400
Required Tools
ToolPart Number
A 5P-3931
Table 1
Part Description
Anti-Seize Compound
Qty
1
1.Remove bolts (1). Disconnect harness assembly (5). Remove bolts (2). Remove nut (4).
Remove muffler (3) .
2.Remove gasket (6) from muffler (3). Note the orientation of the gasket for installation purposes.
Installation Procedure

26. Illustration 3 g01051400
1. Install gasket (6) onto muffler (3). Note the orientation of the gasket.

27. Illustration 4 g01041430
2. Install muffler (3). Apply Tooling (A) to bolts (1). Install bolts (1). Install nut (4). Install
bolts (2). Connect harness assembly (5).
Note: Bolts (1) need to be installed first in order to properly seal gasket (6) .
Copyright 1993 - 2023 Caterpillar Inc.
All Rights Reserved.
Private Network For SIS Licensees.
Sat Sep 16 23:20:17 UTC+0530 2023

28. Previous Screen
Shutdown SIS
Media Number -RENR7582-07 Publication Date -01/01/2010
Product: MULTI TERRAIN LOADER
Model: 267B MULTI TERRAIN LOADER CYC
Configuration: 267B, 277B and 287B Multi Terrain Loader CYC00001-UP (MACHINE) POWERED BY 3044C Engine
Date Updated -26/02/2010
i 02001310
Disassembly and Assembly
3044C Industrial Engine and Engines for Caterpillar Built Machines
Installation Procedure
Turbocharger - Install
Tool
A
SMCS - 1052-012
Table 1
Required Tools
Part NumberPart Description
5P-3931 Anti-Seize Compound
Qty
-
Keep all parts clean from contaminants.
Contaminants may cause rapid wear and shortened component life.
NOTICE

29. Illustration 1
Illustration 2
g01035597
g01035595
1.
2. Install gasket (4) and connect tube assembly (3). Install bolts (2). Install bolt (1) .
Install gasket (7) and position turbocharger (5). Apply Tooling (A) to nuts (6). Install
nuts (6). Install gasket (8) and connect elbow assembly (10). Install bolts (9) .
Copyright 1993 - 2023 Caterpillar Inc.
All Rights Reserved.
Private Network For SIS Licensees.
Sat Sep 16 23:20:51 UTC+0530 2023

30. Previous Screen
Shutdown SIS
Media Number -RENR7582-07 Publication Date -01/01/2010
Product: MULTI TERRAIN LOADER
Model: 267B MULTI TERRAIN LOADER CYC
Configuration: 267B, 277B and 287B Multi Terrain Loader CYC00001-UP (MACHINE) POWERED BY 3044C Engine
Date Updated -26/02/2010
i 02001252
Disassembly and Assembly
3044C Industrial Engine and Engines for Caterpillar Built Machines
Removal Procedure
Turbocharger - Remove
SMCS - 1052-011
Keep all parts clean from contaminants.
Contaminants may cause rapid wear and shortened component life.
Table 1
Required Tools
ToolPart NumberPart DescriptionQty
9U-7089 Tapered Cap/Plug 1
9U-7090 Tapered Cap/Plug 1
ZZ
9U-7070 Tapered Cap/Plug 1
9U-7087 Tapered Cap/Plug 4
Note: SERVICE DATA: TOOLING (ZZ) WILL NOT BE IDENTIFIED IN PHOTOGRAPHS
IN THE REMOVAL OR THE INSTALLATION. THIS TOOLING IS SHOWN IN ORDER
TO ASSIST THE EXPERIENCED SERVICEMAN.
NOTICE

31. For the full PDF version of this
manual, Please click on the above
download PDF button.
WEBSITE -
WWW.MANUALLABS.COM