SlideShare a Scribd company logo
1 of 6
Download to read offline
0.80
0.70
0.60
0.50
0.40
0.30
0.20
0.10
0.00
FrictionCoefficient
100x10
3
9080706050403020100
Laps
FRICTION vs TIME TEST
UNTEXTURED
TEXTURED
"poor" lubrication
v = 12 cm/s
normal load = 7N
nominal contact pressure: 7MPa
1. Oil Reservoir
2. Pipe
3. Angle Cock
4. Accessory Nozzle
5. Transparent Cup
6. Piston Ring Segments
7. Cylinder Liner
8. Heat Source
1000800600
Crank speed [rpm]
Pressure 0.9 MPa
Baseline
LST
SET
1000800600
Crank speed [rpm]
Pressure 0.6 MPa
Baseline
LST
SET
1000800600
Crank speed [rpm]
Pressure 0.3 MPa
Baseline
LST
SET2.0
1.5
1.0
0.5
0.0
FrictionForce[N]
1000800600
Crank speed [rpm]
Pressure 0.1 MPa
Baseline
LST
SET

More Related Content

More from Alberto Borghi

More from Alberto Borghi (7)

Nanocomposite Zinc Coating
Nanocomposite Zinc CoatingNanocomposite Zinc Coating
Nanocomposite Zinc Coating
 
Nanocomposite Materials Nanofluids
Nanocomposite Materials NanofluidsNanocomposite Materials Nanofluids
Nanocomposite Materials Nanofluids
 
Nanocomposite Materials Lubricants
Nanocomposite Materials LubricantsNanocomposite Materials Lubricants
Nanocomposite Materials Lubricants
 
gazzetta 2711-3
gazzetta 2711-3gazzetta 2711-3
gazzetta 2711-3
 
Nanocomposite Materials Paints
Nanocomposite Materials PaintsNanocomposite Materials Paints
Nanocomposite Materials Paints
 
Tribology
TribologyTribology
Tribology
 
TS
TSTS
TS
 

Engine improvement by nanotechnology

  • 1.
  • 2.
  • 3.
  • 4.
  • 5.
  • 6. 0.80 0.70 0.60 0.50 0.40 0.30 0.20 0.10 0.00 FrictionCoefficient 100x10 3 9080706050403020100 Laps FRICTION vs TIME TEST UNTEXTURED TEXTURED "poor" lubrication v = 12 cm/s normal load = 7N nominal contact pressure: 7MPa 1. Oil Reservoir 2. Pipe 3. Angle Cock 4. Accessory Nozzle 5. Transparent Cup 6. Piston Ring Segments 7. Cylinder Liner 8. Heat Source 1000800600 Crank speed [rpm] Pressure 0.9 MPa Baseline LST SET 1000800600 Crank speed [rpm] Pressure 0.6 MPa Baseline LST SET 1000800600 Crank speed [rpm] Pressure 0.3 MPa Baseline LST SET2.0 1.5 1.0 0.5 0.0 FrictionForce[N] 1000800600 Crank speed [rpm] Pressure 0.1 MPa Baseline LST SET