3. What is VIRTUS?
VIRTUS is the brand of our high-quality product line for
Bodywork, Industry and Naval.
+50 years of study and experience in developing our
products, the best result is assured.
The constant chemical research, carried out in Allchem’s
labs, directed to the creation of products which respect the
environment and operator’s health.
The best for car care, car polishing and car refinish.
FINISHING KIT “G’’
Mercoledì, 25 settembre 2013
4. FINISHING KIT “G’’
Why VIRTUS?
Economical
Budget wise
Best result that last
What is Finishing kit “G’’?
Has all the accessories needed for a perfect finish without
haze and holograms
Mercoledì, 25 settembre 2013
5. FINISHING KIT “G’’
436 EXTRA COARSE CUT RUBBING COMPOUND
Applicable for the treatment of painted surfaces which shown minimum and medium-sized
defects. Applicable by machine. Excellent on both old and fresh paint. Extraordinary for
ceramic paints and clear coats Ultra High Solid (soft). Use Foamed Wool Pad for the
removal of sanding marks and finish with White/Black Foam Pad for a High glossy finish
without halos and opacity. USE 436 EXTRA COARSE CUT for definitive removal of defects
such as P1200-1500 sanding marks, leaving a high final gloss. CLEAR ACTION Product
designed and developed for a fast and clean use without addition of water. It allows you to
see immediately the removal of the defect. Reduced working time DEFINITIVE REMOVAL
OF THE DEFECT. USAGE On all automotive paints, included: acrylics, water-based, high
solid LOW VOC, two-component, single-component and OEM auto products. Perfect to use
on marine gelcoat. Suitable for ceramic anti-scratch paints and new water-based clear
coats. APPROVED Ammonia & silicone free LOW V.O.C. Contains a very low VOC content
for a better environmental conditions. HEALTH & SAFETY Non irritant, non harmful, Non
flammable.
Available into the kit by request.
Mercoledì, 25 settembre 2013
6. FINISHING KIT “G’’
476 ONE STEP CUT & POLISH – POLISHING GEL AND RUBBING COMPOUND
Applicable for the treatment of painted surfaces which shown minimum and medium-sized
defects. Applicable by machine. Excellent on both old and fresh paint. Extraordinary of
ceramic paints and clear coats Ultra High Solid (soft). Use Foamed Wool Pad for the
removal of sanding marks and finish with White/Black Foam Pad for a High glossy finish
without halos, opacity and holograms.
USE Abrasive liquid for definitive removal of defects such as P1500-2000 sanding marks,
leaving a high final gloss in one single step.
CLEAR ACTION Product designed and developed for a fast and clean use without addition
of water. It allows you to see immediately the removal of the defect. Reduced working time
DEFINITIVE REMOVAL OF THE DEFECT The product doesn’t hide imperfections, scratches
and holograms with cosmetic oils, but it removes them permanently.
USAGE On all automotive paints, included: acrylics, water-based, high solid LOW VOC,
two-component, single-component and OEM auto products. Suitable for ceramic anti-
scratch paints and new water-based clear coats. Perfect for gelcoat. APPROVED Ammonia
& silicone free LOW V.O.C. Contains a very low VOC content for a better environmental
conditions. HEALTH & SAFETY Non irritant, non harmful, Non flammable.
Mercoledì, 25 settembre 2013
7. FINISHING KIT “G’’
473 CERAMIC ABRASIVE POLISH – MEDIUM/FINE CUT
A specially formulated super fine glaze designed to polish out any residual swirl
marks which can occur on problem colour dark paint finishes eg. blacks.
Produces a superb high gloss finish with no greasy/smearing problems and
holograms free. All automotive paint systems including water based, high solid,
single component and 2-pack, acrylic, cellulose, synthetic, anti scratches clear
coats, OEM finishes and gelcoat.
Mercoledì, 25 settembre 2013
8. FINISHING KIT “G’’
472 / 472FAST HOLOGRAM FREE ULTRAFINE CUT
Abrasive liquid for removal of defects on OEM, for body shops, detailers and
nautic. Gives back glossy and removes scratches and holograms. Removes the
defects of coating such as sandpapering marks, scratching of carwash
services, oxidating of the coats ecc.. Renews the glossy to dull and oxidized
paints with few simple operation.
The product does not hide blemishes or scratches with cosmetic oils, but
eliminates them forever. Appliable on all kinds of coats, included: acrylics, water
based, high solids, two components, monocomponents and original products of
OEM car brands. Excellent for antiscratch ceramic paints finishing and new low
V.O.C. clear coats.
472FAST remove sanding scratches of P1500 with Foamed Wool Pad or
P2000 with Medium Foam Pad.
Mercoledì, 25 settembre 2013
9. FINISHING KIT “G’’
453 PTFE PROTECTIVE POLISH
PTFE polish (hand or machine wax), produce high gloss
with easy application. Restore the original colour and
provides a durable finish. For use by hand or by
machine (700-1800 rpm).
Mercoledì, 25 settembre 2013
10. FINISHING KIT “G’’
471 SPRAY POLISH
POLYMER+PTFE+NANOTECHNOLOGY
ANTISTATIC ACTION
Is a burnishing spray polish suitable for all types of
paint, plastic, rubber, dashboard, gel coat, glass, etc.
The burnishing action permits an excellent finish on all
types of paint, including delicate colors and black
coats.
Excellent for the removal of traces of abrasive paste,
haloes, etc.. and also suitable for WATER-LESS CAR
WASH.
Is the best solution to use with PolyDisk & PolySponge.
Mercoledì, 25 settembre 2013
11. FINISHING KIT “G’’
463 HOLOGRAM FREE PAINT PROTECTION SYSTEM
Protects the car for 24 months or 12 car washes.
Eliminates minor defects. Eliminates all holograms.
Renews and protects all types of paint & gelcoat (excellent for
metallic and double layer and 2K).
Forms a water-proof, glossy and long lasting molecular
protection film. Can be easily applied and
removed.
UV protected.
Apply 463 on surface with DA polisher
or orbital sander, wait 30-60 minutes
and wipe off with a microfibre cloth.
Resistant to 150 hand washes.
Mercoledì, 25 settembre 2013
12. FINISHING KIT “G’’
467 GLASS CLEANER & PROTECT
Spray directly to glass and wipe off using
the GLASS & MIRROR ULTRAMICROFIBRE
CLOTH made specially for glasses.
Mercoledì, 25 settembre 2013
13. FINISHING KIT “G’’
692 POLYDISK, CONTAMINATION REMOVER
Polydisk works fast and achieves professional results with
the new advanced rubber polymer technology, which
replaces the use of clay bars. With dual action orbital
polisher, it safely and easily removes paint over spray,
water spots, tree sap, rail dust and other bonded surface
contaminants from the surface of automotive paint, glass,
moldings and plastic. Polydisk works great with only 471
Polymer Spray Polish lubricant. Unlike the clay bar, the
Polydisk can be cleaned by simply rinsing off the
accumulated contaminates with water.
If you drop the Polydisk on the ground, no worries, Just
rinse the sponge pad clean and you’re ready to keep using
it. 471 Polymer Spray Polish allows for sturdy and
controlled handling, unlike clay bars where constant
reshaping is required. There is a significant difference
between Virtus Polydisk and clay bars. An outstanding
machine/advanced polymer Combination makes Virtus
Polydisk the best contamination removal tool ever.
Mercoledì, 25 settembre 2013
14. FINISHING KIT “G’’
BLACK FINISHING FOAM PAD
High density extra-soft grey sponge for a perfect
finishing with polishes and wax. The gradually curved
surface (patented) called VARIABLE
CONTACT, eliminate splashes during finishing. Allow the
operator a perfect control of the finishing work.
Washable and highly resistant. For protection
application.
WHITE FINISHING FOAM PAD
High density, soft white sponge for a perfect finishing
and removal of marks. The gradually curved surface
(patented) called VARIABLE CONTACT, eliminate
splashes during finishing. Allow the operator a perfect
control of the finishing work. Washable and highly
resistent.
Mercoledì, 25 settembre 2013
15. FINISHING KIT “G’’
FOAMED WOOL PAD
A softer foamed wool pad, for new generation coats
finishing. Fast finishing, even with medium-fine abrasive
liquids. Does not leave finishing marks. High glossy. To
be combined with 473 OEM CERAMIC ABRASIVE
POLISH, to remove even new anti scratch clear coats
marks.
YELLOW ABRASIVE FOAM PAD
High density extra-soft grey sponge for a
perfect finishing with polishes and wax. The
gradually curved surface (patented)
called VARIABLE CONTACT, eliminate
splashes during finishing. Allow the operator a
perfect control of the finishing work.
Washable and highly resistant.
Mercoledì, 25 settembre 2013
16. FINISHING KIT “G’’
SOFT BACK-UP PLATE
Strong, with highest grade hook material available.
Unique back-up plate with soft rubber for polishing
without scratches.
DETAILERS MASKING TAPE
Cover sharp edges, corners and rubber trims and don’t leave
residue on paint.
Mercoledì, 25 settembre 2013
17. FINISHING KIT “G’’
FOAM PAD CLEANING BRUSH
To be used to clean foam and wool
pads avoiding damages and extend
pads life.
ULTRAMICROFIBER
Microfiber cloth for polishing without marks.
To be used without detergents, just wet with
water or dry.
Mercoledì, 25 settembre 2013
18. FINISHING KIT “G’’
ULTRAMICROFIBER – NO SCRATCHES ON THE CAR
With our apron you can do safe finish because is made
with our best Ultramicrofiber. No scratches on the paint
of car. The lock can help You to fix the cord of polisher.
Is washable by wash machine and can be used for
remove compound and polishes from paint.
Mercoledì, 25 settembre 2013
19. FINISHING KIT “G’’
LONG LIFE ABRASIVE SANDING FILM
For sanding light scratches, prior to polishing.
Easy to use with the sanding block.
P800
P1500
P2000
Mercoledì, 25 settembre 2013
20. 436 – Extra Coarse cut compound for old or fresh
paint for the removal of orange peel, sanding marks,
swirl marks and light scratches. Can be use with
foamed wool pad followed by yellow foam pad or
yellow foam pad only. Perfect for DA polisher.
476 – One step polish on either old or fresh paint for
the removal of sanding marks, swirl marks and light
scratches. Can be use with foamed wool pad followed
by yellow foam pad or yellow foam pad only.
473 – First step polish for any type of paints.
Depending on the paint condition 473 can be used
with the foamed wool pad followed by the yellow foam
pad to remove heavy swirls and scratches. Can be
use with yellow pad only if light swirls are to be
removed.
472FAST – Hologram remover best for solid color
paints. Applicable by machine ( low speed maximum
2500rpm and slow movement ) with the white foam
pad to remove holograms and pad marks.
472 – Hologram remover. It is the last step on
polishing prior to application of protection. Applicable
by machine ( low speed maximum 2500rpm and slow
movement ) with the white foam pad to remove
holograms and pad marks.
453 – High gloss paint protection with PTFE. It can
be applied by machine or by hand with the black foam
pad. Can be wiped off immediately.
463 – Super high gloss Nano paint protection. Can be
applied by hand. Orbital machine application for best
result. Wait for a minimum of 30 minutes and wipe
off with a microfiber cloth.
471 – Spray polish suitable for paints, plastics and
rubber trims and dashboard. It can be used for dry
cleaning the car.
Polydisk – Use for the removal of paint contamination
and overspray. Can be use by hand or machine with
either 471 or water.
PRODUCTS
Mercoledì, 25 settembre 2013
21. STEPS 1
WASHING WITH SHAMPOO or WATERLESS CAR WASH
Wash the car with car
shampoo or with 471
SPRAY POLISH and one soft
& clean microfibre cloth
Mercoledì, 25 settembre 2013
22. STEPS 2
DECONTAMINATION
Remove the contamination
from all car parts with
POLYDISK / POLYSPONGE &
471 SPRAY POLISH
Spray over the car 471
SPRAY POLISH and work
over with POLYDISK (by
hand or by orbital sander
or dual action polisher) to
remove all contamination
like paint over spray, water
spots, tree sap, rail dust,
mosquitos and other
bonded surface
contaminants.
Mercoledì, 25 settembre 2013
23. STEPS 3
SCRATCH REMOVER
Remove deep scratches
with 472FAST and Foamed
Wool Pad with rotary
polisher at medium speed.
Follow with 472FAST and
White Foam Pad to give
perfect finish Hologram
Free and glossy.
Defect of paint / holograms
will never coming back (one
day later or after a car
wash). Is not a filling
product.
472FAST is cutting for the
first 15-20 seconds of
work and later is finishing.
Use 472FAST and foam
pad in one step to remove
light scratches.
Mercoledì, 25 settembre 2013
24. STEPS 4
REGULAR PROTECTION
Apply 453 GLOSSY PTFE
wax with BLACK SOFT FOAM
PAD and low speed polisher
or by hand with a clean
Microfibre Cloth.
Very easy to apply and
remove.
Restore the original colour
and provide a durable
finish.
Mercoledì, 25 settembre 2013
25. STEPS 4 alternative
LONG LIFE PROTECTION
Apply 463 PAINT
PROTECTION SYSTEM with
BLACK SOFT FOAM PAD and
rotary or orbital polisher
PROTECTION CURING TIME
Wait between 30 to 60
minutes before to wipe off
CLEANING
Wipe off with a clean
microfiber towel
After 1 hour is possible to
make the water repellency
test.
The surface is protected
against UV Rays.
Mercoledì, 25 settembre 2013
26. STEPS 5
GLASS CLEANING
Apply 467 GLASS CLEANER
and wipe off with GLASS &
MIRROR Ultramicrofibre
Cloth.
Very easy to apply.
467 GLASS CLEANER has a
vertical stability; don’t
runs.
GLASS & MIRROR
Ultramicrofibre Cloth clean
all surfaces perfectly
without traces.
Mercoledì, 25 settembre 2013
27. STEPS 6
DASHBOARD & PLASTIC CLEANING
Apply 471 and wipe off with
GLASS & MIRROR
Ultramicrofibre Cloth.
Very easy to apply.
467 GLASS CLEANER leave
the surfaces “ANTISTATIC”
dust repellent.
471 & Ultramicrofibre
Cloth clean and protect all
surfaces like paint,
glasses, mirrors, plastics,
rubbers, leather seats and
dashboard.
Mercoledì, 25 settembre 2013
28. STEPS 7
WELLS CLEANING
Apply 472 FAST with FOAM
CONE to remove scratches
or contamination from
weels.
Wipe off with Grey
Microfibre cloth.
Mercoledì, 25 settembre 2013
29. 1 STEP - WASHING
Wash the car with car shampoo
or with 471 SPRAY POLISH and
one soft & clean microfibre
cloth
2 STEP - DECONTAMINATION
Remove the contamination from
all car parts with POLYDISK &
471 SPRAY POLISH
3 STEP – SCRATCH REMOVER
Remove deep scratches with
472FAST and Foamed Wool Pad
with rotary polisher at medium
speed
4 STEP – FINAL GLOSS
Continue to work on surface
with 472FAST and WHITE FOAM
PAD untill all defects are
removed
5 STEP – CLEANING SURFACE
Wipe off very well with a clean
Microfiber Towel
6 STEP – PAINT PROTECTION
Apply 463 PAINT PROTECTION
SYSTEM with BLACK SOFT FOAM
PAD and rotary / orbital polisher
(Alternative to Step 4)
7 STEP – PROTECTION CURING
TIME
Wait between 30 to 60
minutes before to wipe off
8 STEP - CLEANING
Wipe off with a clean microfiber
towel
9 STEP - GLASSES PROTECTION
Clean all glasses with 467
GLASS Cleaner or make a
protection with Nano Glass
10 STEP – DASHBOARD +
INTERIOR
Clean the dashboard and
interior plastic parts with 471
SPRAY POLISH and microfiber
towel
11 STEP – FABRIC PROTECTION
Protect carpet, moquettes and
seats with 465 Fabric Protector
using a mask and in well
aerated area
12 STEP – WHEELS CLEANING
Polish wheels with 472FAST and
Foam Cone Yellow or Black
depending of scratches to be
removed
And soon many other products
will be added.
STEPS
Mercoledì, 25 settembre 2013
30. Code Descrip+on UM Size Pcs
350.0000.00 GUIDA "FINISHING SYSTEM" Nr. 20 cm x 20 cm 1
360.0190.46 ABRASIVE FOAMED WOOL PAD Nr. Ø 7" = 180mm 2
351.1585.46 ABRASIVE YELLOW FOAM PAD Nr. Ø 6,5" = 165mm 1
351.1685.46 POLISHING WHITE FOAM PAD Nr. Ø 6,5" = 165mm 2
351.1785.46 FINISHING GREY FOAM PAD Nr. Ø 6,5" = 165mm 2
351.0402.42 BACK-UP PLATE FOR WOOL AND FOAM PAD Nr. ø 150mm / 14mm 1
376.0045.89 POLISHING PAD CLEANING BRUSH Nr. Pcs 1
476.0500.12 476 GREEN • RUBBING COMPOUND • EXTRA FAST CUT Nr. 500 ml 1
473.0500.12 473 FUCSIA CERAMIC ABRASIVE POLISH • MEDIUM/FINE CUT Nr. 500 ml 1
472.0508.12 472 GREEN • RUBBING COMPOUND HOLOGRAM FREE • ULTRAFINE FAST CUT Nr. 500 ml 1
472.0500.12 472 BLUE• RUBBING COMPOUND HOLOGRAM FREE • ULTRAFINE CUT Nr. 500 ml 1
453.0500.12 453 GLOSSY PINK KRYTOX® POLISH with PTFE Nr. 500 ml 1
471.0500.12 471 SPRAY POLISH – Polymer spray for paint, glasses, rubbers, plastics, dashboard, etc… Nr. 500 ml 1
463.0500.12 463 PAINT PROTECTION SYSTEM – Long life protection polish Nr. 500 ml 1
467.0500.12 467 GLASS CLEANER – Clean & protect all glasses and mirror Nr. 500 ml 1
692.0150.01 692 POLYDISK Contamination Remover Nr. Ø 160mm 1
360.4044.24 BLUE POLISH ULTRAMICROFIBER CLOTH Nr. 40 x 40 cm 2
360.4040.24 BLUE GLASSES ULTRAMICROFIBER CLOTH Nr. 40 x 40 cm 2
917.0000.02 BLUE ULTRAMICROFIBER APRON Nr. Pcs 1
370.0800.00 ABRASIVE FILM SANDING DISC Ø 42mm P800 Nr. P800 10
370.1500.00 ABRASIVE FILM SANDING DISC Ø 42mm P1500 Nr. P1500 10
370.2000.00 ABRASIVE FILM SANDING DISC Ø 42mm P2000 Nr. P2000 10
350.0000.04 PLASTIC HOLDER BLOCK for sanding discs ø 42mm Nr. Kit 1
597.1951.48 DETAILER MASKING TAPE Nr. 19mm x 50m 1
330.0000.400.19 VIRTUS PRO CAP Nr. L 1
330.0000.400.20 VIRTUS PRO – PROFESSIONAL DETAILER T-SHIRT Nr. M-L-XL-XXL 1
429.0000.00 PLASTIC CASE HOLDER Resistant to 100 kg Nr. Pcs 1
CONTENT OF POLISHING KIT “G”CONTENT OF POLISHING KIT “G”
Mercoledì, 25 settembre 2013