Opcom OP-Com 2010 V Can OBD2 for Opel Firmware v1.45

1. Item No:
Link:
SP105-B
http://www.diyobd2.fr/wholesale/opcom-op-com-2010-v-can-obdii-opel-free-shipping-1366.html
How to refit Opel Astra CD30 to CDMP3 with Op-com CAN OBD
In order to update Opel or Vauxhall CD to CDMP3 display, you first need to get the antitheft
protection deactivated. Here is an instruction on decoding CD30MP3 with Op-com.
Equipment:
Op-com OPCOM 2010V CAN OBD diagnostic interface firmware V1.45
How to decode/divorce CD30 to CD30MP3 with Op-com:
1) Install a reset display
2) Program with your CD30 to the new display using engine code
3) Deactivate theft on both
4) Fit your original display back and program using engine code
Connect back old stuff before set no radio in EHU with CD70 and CID
Connect Op-com diagnostic interface to vehicle
Reset antitheft protection
Wait the OPCOM system TID displays DISPLAY SAFE message for a moment and bleeping
signal in speakers.
Turn ignition OFF
Remove the old staff and put new one
Turn ignition to ON
Wait the CID DISPLAY SAFE message displayed and bleeping signal in speakers.
Go to EHU and set antitheft protection on - no bleeping signal now, but DISPLAYSAFE message
displays
Check the status of antitheft protection and its OK!
If the op-com system asks for the engine code, here is the example of Astra-H code index
http://www.diagnostics.org.uk/help/showthread.php/205-Astra-H-CD30-amp-CD30-MP3