Using the lathe

Using The Lathe DarronBirgenheier, “Clausing 5912 metalworking lathe” Taken on May 17, 2003 via Flickr, Creative Commons Attribution

Info on the lathe ,[object Object]

You can also drill, bore, polish, grind and make threads for projects.

The lathe has simple parts, the headstock, which provides power to your work, the bed, which is connects everything together and is under your work, the tailstock, which provides extra support for your project ,and last the tool rest, it is what you must have to keep your tool supported so you can use them to their potential.,[object Object]

The Second Step ,[object Object],[object Object]

And more of the second step… ,[object Object],[object Object],[object Object],[object Object]

Shaping your project ,[object Object],[object Object]

Finishing your project Okay, you’re at the final step and when I say “finishing” I don’t mean when you’re done sanding. When you finish your project it means you apply a stain or wax to give it a glossy, shiny surface making the project look 10 times better. When you are applying them you are going to put your lathe to near full speed and apply a wax or stain with a brush or rag. Thank you for reading!

Using the lathe

Recommended

Recommended

More Related Content

Similar to Using the lathe

Similar to Using the lathe (20)

Recently uploaded

Recently uploaded (15)

Using the lathe