1. Lake Lovers LLC
Located on Lake Tawakoni, TX
We proudly promote
WOW Nanotech Finish for Boats
2. Wow Nanotech Finish Reduces Drag
FAA Wind Tunnel Test
6.5% to 14.6% drag reduction
3. The SECRET is NANOTECHNOLOGY
Top to Bottom – Stem to Stern
Very fine Nonionic Nano-Polymers in a Hydrogen Hydroxide fusion provide super hydrophobic
protection against sun, soil, static and friction for every surface – soft or hard.
Red Dress Racing Newport-Bermuda 1-2 2007 sailed with unpainted bottom
4. HOW IT WORKS
Wax on painted surface Friction coefficient less than
.80
nanofinish on painted surface Friction coefficient greater than
.15
The higher the water bead, the more resistant the surface is to penetration and
better the laminar flow – smoother ride and easier control.
This differential in friction coefficient would require TEN TIMES the abrasive load to
damage the treated surface
5. What will WOW Nanotech Finish do for your
boat?
• Reduce drag.
• Enhance & sustain the beauty & gleam to your boat.
• Bond, seal and protect the surfaces of your boat against:
invasive species, bio-adhesion, UV damage, salt spray,
grime, oxidation, acid rain, & other damaging pollutants.
• Lessen expensive power washing down time for zebra
mussel & algae cleaning.
• Saves time, money & extends the life of your boat.
6. Ultimate Boat Protection
“…transom on my 18 year old Chris Craft. I have two coats of your product on it
and it shines like new .” Dick
Letter also states “yellowed” gel-coat turned almost white.
7. Use on sails, rope guides, stainless, brass, chrome,
soft tops, windows, galley and head surfaces
CAUTION: Too slick for walkways
8. WOW Nanotech Finish is:
• Eco-friendly, EPA safe, high performance, total
barrier treatment that may be used everywhere on your
boat except for walking surfaces. Use on:
Gel-coat Stainless steel Trim tabs
Gimbals Water intakes Plastic
Aluminum Fiberglass Fabric
• NOT A PAINT or CHEMICAL COATING but a clear, flexible,
odorless, water based, eco-friendly, penetrating
protectant that can be sprayed, rolled, or simply wiped
on.
9. Bio adhesion, oxidation, UV degradation &
friction all occur within the first nanometer of a
surface.
Like an invisible shield
WOW Nanotech Finish
seals & protects the surfaces of your
boat
12. Minimize barnacles sticking
Bottom of 23’Sea Ray with 1 year old bottom paint. A strip down the
middle was masked, nanofinish applied, then tape removed. Left at
harbor in Cotuit, Massachusetts for 5 summer months in 2006.
Barnacles grew on untreated area, but NOT on where treated
“…. In years past, by mid summer the barnacles were so bad they caused steering
problems, and tremendous drag under power. Now those problems are gone!
Larry, Lt. Cdr. USCG, Retired
13. WOW Nanotech Finish
• Is a single component product.
– No mixing.
– Easily applied & has a fast cure time.
• Contains no Volatile Organic Compounds (VOCs), or petroleum
distillates.
– Eco-friendly & EPA safe.
• Adds no weight or dimension to the surface being finished.
– Smoother surfaces have less drag therefore use less fuel.
• Dramatically reduces fouling, bio adhesion, oxidation, UV
degradation & friction.
– Extends the life of your boat.
– Reduces maintenance and operating costs.
14. Coverage
• One (1) drop of WOW Nanotech Finish covers approximately
eight (8) square inches.
• One (1) pint of WOW Nanotech Finish covers approximately:
– Four (4) to Six (6) 22’ Bass boats: stem to stern, gunwale
to gunwale; including the seats and windshield.
– Three (3) to Four (4) large SUV’s: roof to road, bumper to
bumper; including the interior.
A little WOW Nanotech Finish goes a very long way.
15. Coverage
cont’d
• Another way to look at coverage is price per square foot of
the materials.
• Estimates are that a 23’ boat hull needs 1 gallon (8 pints) of
bottom paint at a cost of $90.00 - $100.00 gallon + S/H.
• WOW Nanotech Finish will do the same boat hull with 1 pint
for $19.95 + S/H.
An 80% savings in materials costs.
Not to mention the savings in labor and time
Paint = 2 days/ WOW! = 2 hours
17. Your satisfaction is guaranteed or you will receive a full
refund of the purchase price.
Just return the unused product.
• To place an order. Please contact Mitch Benway at 817-
217-5321 or mitchbenway@gmail.com
• http://www.linkedin.com/in/mitchbenway
Lake Lovers LLC supports the “clean, drain and dry” campaign
to stem the spread of Zebra Mussels.
Made in America