Since 1976, Goodwin Heart Pine Company has earned the reputation as one of the most highly-respected manufacturers of reclaimed wood flooring in antique heart pine and original-growth heart cypress in the world. Goodwin's clients include homeowners and businesses throughout the country. Our unique River-Recovered® wood has been featured on the History Channel, PBS, HGTV, in several publications, and has received national recognition and awards.
CALL ON ➥8923113531 🔝Call Girls Aminabad Lucknow best Night Fun service
Reclaimed Hard Wood Floors Good News 3
1. We guarantee you 100 percent heart face on every All floors feature back relief to let each board
River-Recovered™ board, and 98-100 percent on “breathe” properly.
our finest building-reclaimed Legacy™ products.
We give you more wood on the top for nailing and
Your order is trimmed of all waste materials and all for extra sanding over the floor’s expected lifespan of
horizontal shake is removed. Unlike other mills, we do several centuries long.
not mark or leave defects in the floorboards for you to
Your floor is counted by lengths to guarantee “more
cut out unless specified by the client.
than” 100 percent coverage.
Each board is evaluated and graded again and again
We don’t cut down trees. The rare heart pine and heart
throughout the milling process to guarantee a consis-
cypress logs we reclaim from rivers are recovered by
tent, stable product worthy of the Goodwin name.
independent state-licensed diving crews.
Goodwin exceeds the highest industry standards and is
When you buy Goodwin’s products you are doing
possibly the only manufacturer who follows the strictest
the right thing for the environment. Some of our
1904 standards from the Southern Pine Inspection
products can be used to achieve points from LEED,
Bureau.
an organization that fosters the use of environmentally
Our flooring is precisely milled to exact specifications sensitive building products.
(to within only a few thousandths of an inch). Each fit
The timber is carefully kiln-dried so the flooring can be
is tight to eliminate squeaks and to save money during
easily acclimated to the site.
installation.
Don’t hesitate to ask us about custom orders.
We trim the ends of each floorboard precisely to assist
installation.
2. C O M PA R I S O N C H A RT
Select grain is achieved by sawing flat through the log and results in a blend of both arching
grain and vertical grain in planks up to 10 inches wide (wider widths available for lumber). Goodwin pro-
vides a high percentage of vertical grain (or about 75 to 85 percent) for wide plainsawn projects.
V
ertical grain is a pinstriped pattern achieved along the full length of the board by using the quar-
tersawing process (a more intricate sawing method that does incur more waste). Goodwin provides 100%
vertical grain, with growth rings no more than 45 degrees perpendicular to the face.
C y grain
url is an extremely rare, natural burled grain. This unique and luminous pattern is
found in the outer wood of less than 1% of all reclaimed logs. It is perfect for a stunning conversation
piece, inlays on flooring and cabinetry, and other specialty projects.
Age Heart wood Knots Growth Notes Widths Color Nail
(= hardness Rings Available Holes
& durability) (= hardness)
A N T I Q U E R I V E R -R E C O V E R E D TM H E A RT P I N E
Select 200-500 yrs 100% None over At least No pitch up to 10” floor rich red none
1 1/4” 8 per inch pockets over 1/8” up to 12” lumber
Select Clear 200-500 yrs 100% Rare, pin knots At least No pitch up to 10” floor rich red none
up to 1/2” 8 per inch pockets over 1/8” up to 12” lumber
Vertical 200-500 yrs 100% None over At least No pitch 3” and 4” rich red none
1 1/4” 8 per inch pockets over 1/8” 6” limited qty.
Vertical 200-500 yrs 100% Rare, pin knots At least No pitch 3” or up to 4” rich red none
Clear up to 1/2” 8 per inch pockets over 1/8” 6” limited qty.
Curly 200-500 yrs 100% Rare, pin knots NA Rare burl up to 10” rich red none
for only lumber
Midnight 200-500 yrs 100% None over At least No pitch up to 6” chocolate none
Select 1 1/2” 8 per inch pockets over 1/8” 8” limited qty. cherry
Do not make the mistake of comparing our antique woods to new heart pine,“old-growth,” or non-native species. New heart pine (not offered by
Goodwin) is usually 70-90 years old; is softer than antique heart pine with 50 to 100% heart; has knots up to 2 inches; has only about 4 growth rings;
and is pale yellow with some red. Some manufacturers may call this “old growth” wood and/or may cut down existing trees for manufacturing. This
wood as well as other woods harvested outside the country, simply can not be compared to antique heart pine.
3. Age Heart wood Knots Growth Notes Widths Color Nail
(= hardness Rings Available Holes
& durability) (= hardness)
A N T I Q U E L E G A C Y TM (B U I L D I N G - R E C L A I M E D )
Select 200-500 yrs 98-100% None over At least Up to 8” rich red Average 15
(75-85% 1 1/2” 6 per inch per 100 sq. ft.;
vertical grain) slight staining
Vertical 200-500 yrs 98-100% None over At least 3” and 4” rich red Average 15
1 1/2” 6 per inch 6” limited qty. per 100 sq. ft.;
slight staining
Naily 200-500 yrs 95% None over At least 6 1/2” rich red frequent;
1 1/2” 8 per inch often a pattern
Character 200-500 yrs 75%-100% Up to 2” varying Up to 8” rich red Nail holes,
(Vertical and with some staining,
arching grain) yellow sap some cracking
& checking
A N T I Q U E R I V E R -R E C O V E R E D TM H E A RT C Y P R E S S
Select 500+ yrs 100% None over At least up to 10” floor honey brown none
1 1/4” 8 per inch up to 12” lumber
Select Clear 500+ yrs 100% Rare, pin knots At least up to 10” floor honey brown none
up to 1/2” 8 per inch and paneling
up to 14” lumber;
up to 40” custom
Vertical 500+ yrs 100% None over At least Up to 8” honey brown none
1 1/4” 8 per inch
Vertical 500+ yrs 100% Rare, pin knots At least Up to 8” honey brown none
Clear up to 1/2” 8 per inch
Pecky 500+ yrs 100% None over NA up to 10” honey brown none
1 1/2”
Midnight 500+yrs 100% None over At least up to 6” warm chocolate none
1 1/2” 8 per inch
W I L D B L A C K C H E R RY
Wild Black 100% Rare, pin knots NA rich red brown none
4. S P E C I F I C AT I O N S
Architectural and Design Specifications Overview
Heart Pine Heart Cypress Wild Cherry
Specie Original Growth Longleaf Pine Original Growth Bald Cypress Wild Black Cherry
(Pinus palustris) (Taxodium distichum) (Prunus serotina)
Sources River-Recovered™ logs cut and lost River-Recovered™ logs cut and lost Sustainably harvested from hardwood
100-200 years ago or Legacy™ from 100-200 years ago slope forests
turn-of-the-century warehouses
Grades • River-RecoveredTM Select • River-RecoveredTM Select
• River-RecoveredTM Select Clear • River-RecoveredTM Select Clear
• River-RecoveredTM Vertical • River-RecoveredTM Vertical
• River-RecoveredTM Vertical Clear • River-RecoveredTM Vertical Clear
• River-RecoveredTM Curly • River-RecoveredTM Pecky
• MidnightTM Select • MidnightTM Select
• LegacyTM Select
• LegacyTM Vertical
• LegacyTM Naily
• LegacyTM Character
Color • River-RecoveredTM and Legacy™ have • River-RecoveredTM has honey tones • Lustrous pinks to reddish brown;
rose, copper & burgundy tones to rich red tans and light chocolate not as dark as Brazilian cherry.
• Midnight has deeper cherry tones
chocolate tones • Midnight has richer chocolate
• Character has varied color with tones with red undertones
some lighter tones from sapwood
content
Side Hardness 1225 on the Janka scale 690 on the Janka scale 950 on the Janka scale
comparable to red oak (1290) & comparable to Douglas fir (660) comparable to walnut (1010)
29% more stable
Widths Floor: 2 1/4” to 9” face or custom Floor: 2 1/4” to 9” face or custom Floor: 2 1/4” to 5 1/4” face
Treads solid/laminated: 11 1/4” Treads solid/laminated: 11 1/4” Treads laminated: 11 1/4”
Lumber: up to 2 1/2” x 12” Lumber: up to 2” x 14” Lumber: up to 2” x 8”
Beams: up to 12” x 12” Architectural Millwork is full thick- Architectural Millwork is full thick-
Architectural Millwork is full thick- ness, e.g., Crown 3/4” x 5 1/2” ness, e.g., Crown 3/4” x 5 1/2”
ness, e.g., Crown 3/4” x 5 1/2”
Heart 100% for River-Recovered™; 98-100% 100% heart face 100% heart face
for most Legacy™; 75% for Character
G E N E R A L S P E C I F I C AT I O N S
Flooring Random length 1’-12’ Heart Pine and Heart Cypress. Midnight and Cherry 1’-9’, with occasional longer lengths. All may be ordered
Lengths with specific lengths as needed.
Knots River-Recovered™ Select and Vertical allow infrequent tight sound knots, maximum 1 1/4” diameter or less; both grades may be ordered
Clear (pin knots only, no larger than 1/2” diameter). Legacy™ and Midnight will have some larger knots up to 1 1/2”.
Milling Virtually sand-free milling: 1995 Weinig Hydromat 22AL gives sand-free milling (levelness of subfloor will determine if you need
only screen and apply finish or sand once to apply finish).
Kiln Dried 6-8% moisture content in Nyle L500 dehumidification kiln. Acclimation highly recommended to your region and jobsite conditions.
Waste Zero – order only the amount your floor installer specifies (unless installing in diagonal or other unusual pattern).
Finishing Penetrating oil sealer & oil modified polyurethane (satin or gloss) • Waterborne sealer & waterborne polyurethane (satin or gloss)
Penetrating tung oil sealer & finish (satin, medium or high gloss) • Penetrating oil & wax
Complements Quarter round, shoe, cove, baseboard, thresholds & plugs available • Complete line of stairparts & mouldings (standard and
custom base, chairail, crown, casings, sills, etc.)• Paneling (full 3/4” thickness in v-joint, square-edge, single & double beaded)
5. S TA I R PA R T S
A Step Up in Quality
howpiece or austere elegance, Goodwin can enhance your expression of design.
S We craft and stock an extensive selection of stairparts, risers, handrails, solid and
laminated stair treads and blanks for balusters, rails and mouldings. They are
available in any of our select wood species. Call for pricing.
HAND RAILS S TA I R M O U L D I N G S
Hand Rail Stair Tread
2 3/8” x 3 1/2” Return Molding
1” x 1 1/2”
Banister Rail
2 5/8” x 2 7/8” Goodwin researched these antique patterns to
capture the romance of lost artwork. We also can
Bull Nose Trim help with elegant new styles of your own creation.
4/4” x 5 1/2”
4/4” x 3 1/2”
4/4” x 2 1/2”
Tread Assembly
Porch Rail
1 3/8” x 2 1/4”
Radius Stair
Massive Hand Rail Tread
Right-hand shown
2 1/2” x 3 1/4”
Available left or double radius
Goodwin offers Solid
Heart Pine Treads
Stair Tread with • All stairparts and mouldings come in
FAS or cabinet grade lumber.
Combination return Molding
Installed • Treads are most often ordered
Hand / Porch Rail untrimmed for installation onsite.
2 1/2” x 3 7/8” Right-hand attached
We can, however, make a radius tread
Available left or both
or attach returns for you if your
stairmaker prefers.
• Tread sizes: 4/4 x 11 1/4” x 3’, 4’, 5’
and up
6. MILLWORK
The Perfect Accents
he ancient Greeks were the first to accent their structures with mouldings meant
T solely to beautify surfaces. American craftsmen of the 19th century refined their
wood-carved ornamentations in Victorian homes and palaces. Today we reproduce
these antique patterns in heart pine, heart cypress and wild black cherry. Our high-tech
moulder requires skilled operators, special steel and the best equipment to match classic
patterns or custom orders. Call for pricing.
Our variety of fine wood mouldings include:
• Back band • Chair • Plinth blocks
• Base • Cove • Reeded
• Bed Cove • Crown • Rosettes
• Brick • Fluting • Screens
• Cap • Panel • Sill
• Casing • Picture • Thresholds
C ROW N M O U L D I N G S CASINGS MOULDINGS
Step Crown Step Casing Panel Moulding
3/4” x 3 1/2” 3/4” x 3 1/2” 7/8” x 1 9/16”
Step Crown
3/4” x 5 1/2”
Pinch Casing Picture Moulding
3/4” x 3 1/2” 3/4” x 1 3/4”
Cove Crown
3/4” x 3 1/2”
Colonial Casing Picture Frame
13/16” x 2 1/2” Moulding
CHAIR RAIL 4/5” x 2 1/2”
Double Edge
3/4” x 2 5/8”
RO S E T T E
Reeded Moulding
Ribbon Rosette 13/16” x 3 1/2”
3/4” x 2 7/8” 4/4” x 4”
7. DESIGN
Elegant Expressions
e are always happy to work with • The set-up charge for a custom mill run
W any member of the building team
on custom patterns to guarantee
your vision for beautiful surroundings.
is $50, with no minimum. Set-up fee is
waived for runs over 1000 LF.
• Millwork is produced in quality
• Our stairparts and mouldings are archi- clear heart pine, heart cypress and
tecturally drawn and designed to classic sustainably harvested hardwoods.
proportions. We also craft fine solid wood furniture in
• We still craft the same solid wood, full heart pine, heart cypress and wild black
dimension mouldings last offered in the cherry.
1925 edition of 8000 Series by the
Southern Pine Inspection Bureau (reprints Right: Goodwin has carved its unique
available). niche in the industry by recovering rare
• All mouldings and trim have “sand-free” treasures from rivers and milling them into
millwork, free of charge. high quality flooring, stairparts and mill-
• Milling knives are ground at $50 per inch. work. Our wood is found in fine buildings
Allow 7/8” inch more than the finished and homes from Martha’s Vineyard to
pattern widths. Catalina Island to Key West.
CLASSIC DESIGN
shoe Cove Beaded Base
3/4” x 1/2” 3/4” x 3/4” 3/4” x 5 1/2”
3/4” x 3 1/2”
Quarter Round Ogee Base 3/4” x 3/4”
3/4” x 3/4” 3/4” x 5 1/2” Bead Cap
3/4” x 2 1/2”
3/4” x 3 1/2”
3/4” x 3 1/2”
3/4” x 5 1/2”
3/4” x 7 1/2”
8. RESEARCH
Questions to Ask...
1. Is the wood from the longleaf pine?
more sapwood, results in softer wood that
can be scratched and dented.
the forests were cleared, they no longer were
needed. However, the 1924 specifications
Longleaf pine is the best source of antique
Heartwood hardness and strength allow for knots to be no bigger than 11/2”
heart pine. Some companies sell Southern
comes from its resin, and longleaf has more inches in diameter and specify that knots
yellow pine, loblolly, shortleaf pine, slash or
resin than the other 200+ species of pine. must be sound (not loose or open).
a combination and call it heart pine.
Plus, longleaf heartwood is beautiful. The
Although they are pine and they have heart Note: Knots are infrequent in the better
grain is not your usual oak pattern (found in
wood, antique longleaf pine — especially the grades of antique heart pine.
75% of homes) and is a rich, red color
river-recovered™ wood — is stronger, more Note: Goodwin exceeds 1924 standards.
because of the resin. One hundred percent
durable, more stable and has a richer patina
heart wood means the color will be consis-
and color.
tent. Even 98 percent heart will have yellow
6. What about pitch pockets,
checking and nail holes?
2. Is it truly antique? Or how old was
sapwood streaks that produce a strong/obvi-
ous color variation.
Pitch pockets are crystallized resin
the tree when harvested? pockets and should be solid or easily filled.
Alert! Lesser grades can have up to 50 percent
The only way to get heart wood is time. Only pockets 1/8” or less are allowed in
sapwood and may still be called heart pine.
According to the USDA Forest Service book antique heart pine. Checking (or tiny surface
“Longleaf Pine”, it takes 200 years for a
Longleaf pine to become mostly heartwood
4. Are there at least 6 growth cracks) is natural in antique heart pine due to
rings per inch? the high resin content. Checks are easily
and to be considered antique. Scientists say sanded out after installation and will not be
The more growth rings, the stronger the
any wood from a tree less than 200 years old noticeable. Building-reclaimed heartpine
wood. Each pair of light and dark rings is
is “new heart pine.” A 75-year-old tree will usually includes nail holes. Better grades
from one growing season. When pairs of
average only 30% heart, and even a 130-year- allow only small infrequent nail holes.
rings are very close to each other it means
old tree yields wood that is not as hard or rich Building-reclaimed heart pine may also
the tree grew slowly and the wood had
in color as antique heart pine. U.S. Forest include nail staining around the nail holes or
time to become dense and strong.
Service specialists report that even a 200-year- on some areas of the boards.
Longleaf pine trees usually grew only an
old tree will average only 65% heartwood.
inch in diameter every 30 years and lived
Note: Goodwin’s heart pine is from trees 200 to
400 to 500 years. It’s no wonder the wood 7. Do you guarantee you will deliver
500 years old. what is specified?
is so hard and durable. True antique heart
Alert! “Old-growth” does NOT mean We recommend you use the terminology pro-
pine has at least 6 growth rings per inch.
antique. The term is used loosely and often vided by the Reclaimed Wood Council when
Four or less indicates new growth trees.
refers to new heart pine. you specify the grade you want for your proj-
Note: Goodwin exceeds industry standards
by offering premium grades that have 8 or ect. (We are happy to provide this to you.)
3. Is it 100% heartwood?
more rings per inch. Get your grade in writing to guarantee you
A tree has two components: heartwood get what you specified. Larger, more estab-
and sapwood. Heartwood is prized 5. What size and type are the knots? lished manufacturers will spend a great deal of
because its tight grain means it is stronger The last time professional standards were time with you from planning to installation
and more stable. In other words, more is published for heart pine was 1924. After to ensure you get the floor of your dreams.
better. Less heart, which means