Beginners Guide to TikTok for Search - Rachel Pearson - We are Tilt __ Bright...
UR 12
1. UR 89 Universal Controller
(GB) Instructions 3. Then point the remote control at the
Vivanco UR 89 remote control for almost appliance to be controlled.
all TV, audio, video and other infrared- 4. Briefly press the ON/OFF
controllable equipment (appliance on/off) button once. The lamp
Inserting the batteries (LED) blinks. – Except when searching for a
Open the battery flap on the back of the TV code you can also briefly press the yellow
remote control, press the tongue lightly > (Play) button and use the Play function to
upwards, then insert 2 alkaline AAA batteries. search. Make sure that a tape, a DVD or a CD
Check that the polarity markings on the is inserted in the tape deck, player or
batteries and in the battery compartment are recorder.
correctly lined up (+=+), then close the flap 5. Press the ON/OFF (appliance
carefully. – Always use undamaged batteries. on/off) or Play button repeatedly, approx.
Adapting to appliances every second, until the appliance, e.g. your
In order to control your appliances you must DVD player, reacts. - If you notice the reaction
adapt or set the remote control to them. There of your appliance too late and the next code
are two ways of doing so: direct control code has already been emitted you can go back by
entry or code search. pressing SET and then ON/OFF or Play
again. If your appliance has switched itself off
If your UR 89 does not understand you it you must switch it back on again, e.g. on the
blinks twice several times and you can then appliance or with the original remote control,
repeat the entry. Each understood entry is to continue searching. - When your appliance
confirmed by an appliance button blinking reacts you can also try out other buttons
once briefly. without interrupting the search. If some
Direct control code entry using the buttons do not work properly, simply continue
enclosed list searching with ON/OFF or Play.
Example: setting to control a Panasonic 6. When your appliance reacts correctly,
television set: press the appliance button, e.g. TV, and end
1. The enclosed list gives, for example, the the search. The lamp (LED) goes out.
Panasonic Code 154. - The UR 89 continues with the search at the
Please make sure you have selected the point where you interrupted it. When the end
correct list for television sets (TV). of the code list is reached the search stops
2. To prepare code entry, press the SET automatically. The remote control blinks
button, bottom right, keep it pressend and quickly several times. The code last entered
then press the required appliance button, e.g. remains stored. The search stops after
TV, additionally until the lamp (LED) lights approx. 30 seconds of inactivity.
constantly. Automatic code search *
3. Then press the number buttons (e.g. 1 5 Your remote control finds the correct settings
4) in sequence. almost automatically in seconds:
4. Once the numbers have been entered 1. Switch on the appliance to be controlled.
the button lamp goes out and the remote A channel number, for example, appears in
control is ready to control your appliance. the display of your satellite receiver.
5. Finally, test the control code setting by 2. To start the code search, press the SET
trying to control (in this example) your button, bottom right, and then additionally the
television set. If it does not work at all or not required appliance button, e.g. TV, for more
correctly try a different code from the list or than 3 seconds until the lamp (LED) starts to
the code search (see below). blink.
6. To set the remote control for other 3. Then point the remote control at the
appliances, proceed in the same way. Instead appliance to be controlled while the remote
of the TV appliance button, press another control emits a different ON/OFF signal every
button (e.g. VCR, CBL/SAT(DVB, 2 seconds.
DECODER), DVD, TUNER, TAPE, CD, 4. When your appliance reacts, press any
AMP). button, except SET, to end the search. – If
Code search you ended the search too late, continue to
If the brand of your appliance is not in the list search using the Manual Code Search (see
or none of the codes given fits, we above).
recommend a code search. 5. Finally, test the control code setting by
Manual code search trying to control, for example, your DVD
1. Switch on the appliance to be controlled. appliance. If it does not work correctly, please
Program is running. try the code search again. The code search
2. To prepare code search, press the SET then begins with the next code in the
button, bottom right, keep it pressend and sequence. - Remember to switch your
then press the required appliance button, e.g. appliance, e.g. DVD, back on again if you
TV, additionally until the lamp (LED) lights wish to continue searching.
constantly.
Vivanco GmbH, Ewige Weide 15, D-22926 Ahrensburg, e-Mail: hotline@vivanco.de 1
2. UR 89 Universal Controller
Code identification (D) Bedienungsanleitung
You can read off the 3-digit codes you have Fernbedienung Vivanco UR 89 für fast alle
set at any time: Fernseh-, Audio-, Video und anderen
1. Press the appliance button of the infrarotsteuerbaren Geräte
appliance whose code you want to read off, Batterien einlegen
e.g. TV.
Bitte öffnen Sie die Batterieklappe an der
2. Press the SET button and 1,2,3,
Geräterückseite, Lasche leicht nach oben
depending on the part of the code you want to
drücken, und legen Sie 2 Alkali-
read off. For example, if you press SET+1
Mikrozellenbatterien ein. Achten Sie auf die
after TV and the code 154 (in this example)
angegebenen Polaritäten auf Batterien und im
has been set, the lamp blinks once after Batteriefach (+=+), und schließen Sie das
SET+1 is released to show that the hundred
Fach wieder vorsichtig. – Bitte achten Sie
figure is 1. All you have to do is count. The
darauf, immer einwandfreie Batterien zu
ten figure is indicated after SET+2 is released,
verwenden.
e.g. it blinks 5 times for the 5 in 154. The one
figure is indicated after SET+3 is released, Geräteanpassung
e.g. it blinks 4 times for the 4 in 154. - We Um Ihre Geräte steuern zu können, müssen
recommend that you note the found codes, for Sie die Fernbedienung für Ihre Geräte
example, on a label attached to the back of einstellen. Dazu gibt es zwei Möglichkeiten:
the remote control. die direkte Steuerkodeeingabe und die
Kodesuche.
Operation
Wenn die UR 89 Sie nicht versteht, dann
You operate your appliances basically in
blinkt sie 2 Mal und Sie können danach die
exactly the same way as if you were using the Eingabe wiederholen. Jede verstandene
original remote controls, except that you must
Eingabe quittiert sie mit einem kurzen Blink
first press an appliance button (TV, DVD, etc.)
ihrer LED-Anzeigelampe.
to control the required appliance. As the
symbols on the UR 89 could differ from those Die direkte Steuerkodeeingabe mithilfe der
on the original remote controls you may have beigefügten Liste
to try out all the buttons in order to find the Beispiel: Einstellung der Fernbedienung für
functions. ein Panasonic-Fernsehgerät:
Special settings and functions 1. Aus der beigefügten Liste entnehmen
Sie z.B. den Panasonic-Code 154.
1. Volume Punch-Through function: To
Bitte vergewissern Sie sich, dass Sie die
simplify operation, the volume buttons (VOL+
korrekte Liste für Fernseher (TV) gewählt
or VOL-) and the Mute button always haben.
control the last appliance used for volume 2. Zur Vorbereitung der Kodeeingabe
control if the appliance currently selected does drücken Sie die Tasten SET (Einstellung),
not have volume control in its control code. unten rechts, und dann dazu die gewünschte
Example: you are controlling TV at first, then Gerätetaste, z.B. TV, bis das Lämpchen
you change to DVD, which has no volume (LED) dauernd leuchtet.
control. The remote control then automatically 3. Dann drücken Sie nacheinander die
controls the TV volume without you having to Zifferntasten (z.B. 1 5 4).
switch over to TV in between. 4. Nach der Zifferneingabe erlischt die
2. Assigning volume and mute Lampe und die Fernbedienung ist bereit zum
exclusively to one appliance: Press the Steuern Ihres Gerätes.
appliance button of the appliance that you 5. Zum Abschluss testen Sie den
always want to use for volume control, e.g. eingestellten Steuerkode, indem Sie
AMP if that is where you have set your AV versuchen in diesem Fall Ihr TV-Gerät zu
receiver. To lock, press SET and 5. To unlock, steuern. Funktioniert es nicht oder nicht
press SET and 6. richtig, dann versuchen Sie bitte einen
Specifications weiteren Kode aus der Liste oder die
Batteries: 2x AAA batteries, R03, UM4 Kodesuche, s.u..
Range: max. 7 m 6. Die Einstellung der Fernbedienung zur
Not for 400 kHz equipment Steuerung weiterer Geräte nehmen Sie auf
gleiche Weise vor. Anstelle der Gerätetaste
2-year works guarantee TV drücken Sie andere Tasten, z.B. VCR,
Should your UR 89 cease to work within 2 CBL/SAT(DVB,DECODER), DVD, TUNER,
years of purchasing you will receive a free TAPE, CD, AMP). .
replacement from Vivanco. Exceptions:
missing codes, deliberate destruction and Die Kodesuche
normal wear and tear of the housing and Wenn die Marke eines Gerätes nicht in der
buttons. Liste steht oder kein angegebener Kode
passt, empfiehlt sich die Kodesuche.
Vivanco GmbH, Ewige Weide 15, D-22926 Ahrensburg, e-Mail: hotline@vivanco.de 2
3. UR 89 Universal Controller
Manuelle Kodesuche Fernbedienung alle 2 Sekunden ein anderes
1. Bitte das zusteuernde Gerät EIN/AUS Signal sendet.
einschalten. Programm läuft. 4. Wenn Ihr Gerät reagiert, drücken Sie
2. Zur Vorbereitung der Kodesuche irgendeine Taste, außer SET, um die
drücken Sie die Tasten SET (Einstellung), Kodesuche zu beenden. – Wenn Sie die
unten rechts, und dann dazu die gewünschte Suche zu spät beendet haben, dann suchen
Gerätetaste, z.B. TV, bis das Lämpchen Sie bitte weiter mit der Manuellen
(LED) dauernd leuchtet. Kodesuche s.o..
3. Dann Fernbedienung auf das zu 5. Zum Abschluss testen Sie den
steuernde Geräte richten. eingestellten Steuerkode, indem Sie
versuchen z.B. Ihr DVD-Gerät zu steuern.
4. Einmal kurz EIN/AUS (Gerät
Funktioniert es nicht richtig, dann versuchen
ein/aus)Taste drücken. Das Lämpchen (LED)
Sie bitte die Kodesuche noch einmal. Die
blinkt. – Außer bei der Suche nach TV-Kodes
Codesuche startet dann mit dem
können Sie auch die gelbe Taste > (Play)
nächstfolgenden Code. - Vergessen Sie nicht
kurz drücken und die
Ihr Gerät z.B. DVD, wenn Sie weiter suchen
Play/Wiedergabefunktion zum Suchen
lassen wollen, wieder am Gerät
verwenden. Stellen Sie sicher, dass in
einzuschalten.
Bandgeräten, Playern und Rekordern dann
ein Band bzw. eine DVD oder CD eingelegt Kodeindentifikation
ist. Sie können die eingestellten 3-stelligen Kodes
5. Wiederholt, ca. jede Sekunde, EIN/AUS jederzeit auslesen:
1. Gerätetaste des Gerätes drücken,
(Gerät ein/aus) oder Play (Wiedergabe) dessen Kode Sie auslesen möchten. Z.B. TV.
Taste drücken bis Gerät, z.B. Ihr DVD-Player, 2. SET (Einstellen) drücken und dazu 1,2,3
reagiert. - Wenn Sie die Reaktion Ihres drücken, je nachdem welche Stelle des Kodes
Gerätes zu spät bemerkt haben und schon Sie auslesen möchten. Z.B. wenn Sie nach
der nächste Kode gesendet wurde, dann TV SET+1 gedrückt haben und der
macht das nichts: Sie können die Bespielkode 154 eingestellt ist, blinkt das
Suchrichtung umkehren, indem Sie SET und Lämpchen, nach dem loslassen von SET+1,
dann wieder EIN/AUS oder Play drücken. 1* um die Hunderterstelle mit 1 anzuzeigen.
Hatte sich Ihr Gerät ausgeschaltet, so müssen Sie brauchen also nur zu zählen. Mit SET+2
Sie es, z.B. am Gerät oder mit der wird nach dem Loslassen die 10er Stelle
Originalfernbedienung zur weiteren Suche ausgegeben, z.B. blinkt es 5* für die 5 von
wieder einschalten. - Wenn Ihr Gerät reagiert 154. Und Mit SET+3 wird nach dem
können Sie auch andere Tasten probieren, Loslassen die 1er Stelle ausgegeben, z.B.
ohne die Suche zu verlassen. Wenn einige blinkt es 4* für die 4 von 154. - Zur Erinnerung
Tasten nicht richtig funktionieren, suchen Sie empfiehlt es sich gefundenen Kodes, z.B. auf
einfach weiter mit EIN/AUS oder Play. einem Klebeschild an der
6. Wenn Ihr Gerät richtig reagiert, drücken Fernbedienungsrückseite zu notieren.
Sie die Gerätetaste, z.B. TV, und beendenden
so die Suche. Das Lämpchen (LED) geht aus. Bedienung
Die UR 89 setzt die Suche dort fort, wo Sie Sie bedienen Ihre Geräte praktisch genauso,
die Suche abgebrochen hatten. Wenn das wie Sie es von Ihren Originalfernbedienungen
Ende der Kodeliste erreicht ist, endet die her kennen, nur, dass Sie zuvor eine
Suche automatisch. Dabei blinkt die Gerätetaste .TV, DVD usw. drücken müssen,
Fernbedienung mehrfach schnell um das gewünschte Gerät steuern zu können.
hintereinander. Der zuletzt eingegebene Kode Da die Symbole der UR 89 sich von denen
bleibt gespeichert. Die Suche wird nach ca. 30 Ihrer Originalfernbedienungen unterscheiden
Sekunden Untätigkeit abgebrochen. können, müssen Sie u.U. alle Tasten zum
Automatische Kodesuche Finden von Funktionen ausprobieren.
In wenigen Sekunden findet Ihre Spezielle Einstellungen und Funktionen
Fernbedienung fast automatisch die richtigen 1. Lautstärke-Punch-Through-Funktion:
Steuereinstellungen: Zur Vereinfachung der Bedienung steuern die
1. Bitte das zusteuernde Gerät Lautstärketasten (VOL+ oder VOL-) und die
einschalten. Z.B. erscheint eine Stummschalttaste (Stumm) immer das
Programmnummer in der Anzeige Ihres zuletzt zurTonsteuerung genutzte Gerät, wenn
Satempfängers. das aktuell ausgewählte Gerät keine
2. Zum Start der Kodesuche drücken Sie Tonsteuerung im Steuerkode vorgesehen hat.
die Tasten SET (Einstellung), unten rechts, Beispiel: Sie steuern zunächst TV und
und dann dazu die gewünschte Gerätetaste, wechseln dann zu DVD, der keine
z.B. TV, mehr als 3 Sekunden lang bis das Tonsteuerung hat, dann steuert die
Lämpchen (LED) blinkt. Fernbedienung automatisch den
3. Dann Fernbedienung auf das zu Fernsehgeräteton, ohne dass Sie
steuernde Geräte richten, während die zwischendurch auf TV umschalten müssen.
Vivanco GmbH, Ewige Weide 15, D-22926 Ahrensburg, e-Mail: hotline@vivanco.de 3
4. UR 89 Universal Controller
2. Lautstärke und Stummschaltung 5. Finalmente, debe ensayar el código de
exklusiv einem Gerät zuordnen: Drücken mando ajustado intentando a mandar p.ej. su
Sie die Gerätetaste des Gerätes, dass Sie televisor. Caso que no funcione o no funcione
immer zur Tonsteuerung nutzen wollen. Z.B. correctamente, debe elegir otro código de la
AMP wenn Sie dort Ihren AV-Empfänger lista o servirse de la búsqueda de código, v.
eingestellt haben. Zur Verriegelung drücken pasos siguientes.
Sie dann SET und dann dazu die 5. Zur 6. El ajuste del telemando para el mando de
Entriegelung drücken Sie SET und dann dazu otros aparatos debe efectuarlo de la misma
die 6. manera. Entonces, en vez de la tecla de
Technische Daten aparato TV debe presionar otras teclas, p.ej.
Batterien: 2x Mikrozellen, R03, UM4, AAA VCR, CBL/SAT(DVB,DECODER), DVD,
Reichweite: max. 7 m TUNER, TAPE, CD, AMP.
Nicht für 400 kHz Geräte La búsqueda de código
2 Jahre Werksgarantie Si la marca de un aparato no está indicada en
Fällt Ihre UR 89 innerhalb von 2 Jahren nach la lista o si no es correcto ninguno de los
códigos indicados, recomendamos emplear la
dem Kauf aus, dann bekommen Sie von
búsqueda de código.
Vivanco kostenlos Ersatz. Ausnahmen:
Búsqueda de código manual
fehlende Kodes, vorsätzliche Zerstörung und
1 Activar el aparato a mandar. El
normale Abnutzung des Gehäuses und der
programa está activo.
Tasten.
2 Para preparar la búsqueda de código,
(E) Instrucciones para el uso presione brevemente la tecla SET (ajuste),
Telemando Vivanco UR 89 para casi todos abajo a la derecha, y entonces la tecla de
los televisores, aparatos de audio y vídeo aparato requerida, p.ej. TV hasta que el LED
y otros aparatos de telemando infrarrojo esté permanentemente iluminado.
Colocación de pilas 3 Entonces, dirija el telemando hacia el
Abra el compartimiento de pilas situado en la aparato a mandar.
parte trasera del telemando. Apriete 4 Presione una vez brevemente la tecla
suavemente hacia arriba la lengüeta y ACTIVAR/DESACTIVAR
coloque 2 micropilas alcalinas. Preste (encender/apagar aparato). El LED da luz
atención a las polaridades indicadas en las intermitente. – Excepto con ocasión de buscar
pilas y el compartimiento de las mismas (+=+) códigos TV, también puede presionar
y cierre cuidadosamente el compartimiento. – brevemente la tecla amarilla > (Play) y
Rogamos preste atención a que siempre son emplear la función Play/Reproducción para
empleadas pilas impecables. buscar. Entonces, asegúrese de que los
Adaptación del telemando grabadores y reproductores dispongan del
Para poder mandar sus aparatos, debe medio respectivo resp. una cinta, un DVD, un
adaptar el telemando a los aparatos a CD, etc..
mandar. A este efecto, hay dos posibilidades: 5 Presione repetidamente, aprox. una vez
la introducción directa del código de mando, por segundo, la tecla
la búsqueda de código. ACTIVAR/DESACTIVAR
Si su UR 89 no le entiende, da 2 veces (encender/apagar el aparato) o la tecla Play
seguidas luz intermitente. Después puede (reproducción) hasta que reaccione, p.ej. su
repetir la introducción. Cada introducción reproductor DVD, reagiert. – No importa, si
entendida es confirmada mediante un brillo usted haya notado demasiado tarde la
breve del indicador LED. reacción del aparato respectivo y ya ha sido
Introducción directa del código de mando enviado el próximo código: Puede invertir la
mediante la lista anejada dirección de búsqueda presionando SET y
Ejemplo: Ajuste del telemando para un entonces nuevamente la tecla
televisor Panasonic ACTIVAR/DESACTIVAR o Play. Caso que su
1. En la lista anejada puede localizar p.ej. el aparato se hubiera apagado, debe activarlo
código 154 para Panasonic. nuevamente p.ej. en el aparato mismo o
Asegúrese de que haya elegido la lista mediante el telemando original, para que
correcta para televisores (TV). inicie otra vez la búsqueda. – Si su aparato
2. Para preparar la introducción del código, reacciona, también puede probar otras teclas
presione brevemente la tecla SET (tecla de sin tener que salir del proceso de búsqueda.
ajuste) situada abajo a la derecha, y la tecla Si algunas teclas no funcionen correctamente,
de aparato requerida, p.ej. TV hasta que el siga buscando mediante las teclas
LED esté permanentemente iluminado. ACTIVAR/DESACTIVAR o Play.
3. Entonces, debe presionar una tras otra las 6 Si su aparato reaccione correctamente,
teclas de número (p.ej. 1 5 4). presione la tecla de aparato, p.ej. TV, y
4. Después de haber sido introducidos los termine así la búsqueda. Se apaga el LED.
números, se apaga la lámpara y el telemando El UR 89 sigue la búsqueda allí, donde la
está listo para mandar su aparato. había interrumpido. En cuanto el sistema
Vivanco GmbH, Ewige Weide 15, D-22926 Ahrensburg, e-Mail: hotline@vivanco.de 4
5. UR 89 Universal Controller
haya alcanzado el fin de la lista de códigos, la teclas para averiguar sus funciones
búsqueda es terminada de manera especiales.
automática. En esto, el telemando da luz Ajustes y funciones especiales
intermitente rápida. El código últimamente 1. Función de volumen Punch-
introducido es guardado.- Después de unos Through: Para simplificar el manejo, las
30 segundos de inactividad, la búsqueda es teclas de regulación de volumen (VOL+ o
terminada.
VOL-) y la tecla de apagar el sonido (mute)
Búsqueda de código automática siempre controlan el volumen del aparato
Dentro de pocos segundos, su telemando usado últimamente, si el aparato actualmente
localiza de manera casi automática los elegido no disponga de regulación de
ajustes de mando correctos. volumen en el código de mando. Ejemplo:
1. Debe activar el aparato a mandar. P.ej. Primero controla TV para, después, mandar el
aparece un número de programa en el DVD que no dispone de regulación de
indicador de su receptor de SAT. volumen. Entonces, el telemando manda
2. Para emprender la búsqueda de código, automáticamente el volumen del televisor sin
presione la tecla SET (tecla de ajuste), abajo que fuese necesario cambiar a TV.
a la derecha, y la tecla de aparato requerida, 2. Asignar volumen y sonido
p.ej. TV, durante más de 3 segundos hasta apagado a un aparato especial: Presione la
que el LED de luz intermitente. tecla de aparato de aquel aparato que desea
3. Entonces, dirija el telemando hacia el emplear siempre para mandar el volumen;
aparato a mandar, mientras el telemando p.ej. AMP, si ha elegido su receptor de AV.
emite casa 2 segundos otra señal Entonces, para bloquear el ajuste presione
ACTIVAR/DESACTIVAR. SET y el 5, para desbloquearlo SET y el 6.
4. En cuanto su aparato reaccione,
Datos técnicos:
presione cualquier tecla excepto SET para
Pilas: 2x micropilas, R03, UM4, AAA
terminar la búsqueda. Caso que haya
Alcance: máx. 7 m
terminado demasiado tarde, siga mediante la
No apropiado para aparatos de 400 kHz
Búsqueda de código manual.
5. Finalmente, debe ensayar el código de 2 años de garantía de fábrica
mando ajustado intentando a mandar p.ej. su En el caso de que su UR 89 falle dentro de 2
aparato DVD. Caso que no funcione de la años después de haberlo adquirido, Vivanco
manera correcta, debería reiniciar la sustituye el aparato gratuitamente.
búsqueda de código. Entonces, la búsqueda Excepciones: códigos faltantes, destrucción
de código empieza con el código siguiente. intencionada y desgaste normal de la caja y
No olvide activar nuevamente su aparato, las teclas.
p.ej. el DVD, si desea seguir buscando.
(I) Istruzioni per l’uso
Identificación de códigos Telecomando Vivanco UR 89 per quasi tutti
Puede recontar en cualquier momento los i televisori ed altri apparecchi audio-video
códigos ajustados de 3 dígitos: che possono essere comandati a infrarossi
1. Presione la tecla de aquel aparato,
cuyo código desea leer, p.ej. TV. Inserimento delle batterie
2. Presione la tecla SET (ajuste) y 1, Aprire il vano batterie sul dorso
2, 3 - según la posición del dígito de código dell’apparecchio (esercitando una leggera
que desea leer. Si, p.ej., ha presionado TV pressione che permetterà l’apertura del
SET+1 y el código ejemplar es el 154, coperchio). Inserire dunque 2 batterie ministilo
después de haber soltado la tecla SET+1 el alcaline. Prestare attenzione alla polarità
LED del 1 da luz intermitente para indicar el indicata sulle batterie e nel vano batterie
dígito centeno del código. Pues simplemente (+=+); poi richiudere il vano prestando
debe contar. Soltando SET+2, es indicado el attenzione. – Utilizzare esclusivamente
dígito deceno (p.ej. da luz intermitente el 5 de batterie in ottimo stato.
154), y soltando SET+3 es indicada la cifra 4 Programmazione del telecomando
de 154. - Para no olvidar los códigos, se Prima di poter comandare un apparecchio, è
recomienda los apunte p.ej. mediante un necessario programmare il telecomando per
adhesivo fijado en la parte trasera del l’apparecchio in questione. Ciò può avvenire
telemando. in due modi: mediante inserimento diretto del
Manejo codice di comando, nonché mediante la
El manejo de sus aparatos es prácticamente funzione di ricerca del codice.
el mismo que el efectuado con los telemandos Se UR 89 non capisce un inserimento,
originales, aunque antes debe presionar una lampeggia 2 volte e dà la possibilità di ripetere
tecla de aparato TV, DVD, etc., para poder l’inserimento; valida invece ogni inserimento
mandar el aparato requerido. Como los capito mediante un breve lampeggiamento del
símbolos indicados en su UR 89 pueden LED.
variar de los indicados en sus telemandos
originales, dado el caso debe probar todas las
Vivanco GmbH, Ewige Weide 15, D-22926 Ahrensburg, e-Mail: hotline@vivanco.de 5
6. UR 89 Universal Controller
Inserimento diretto di un codice di Non fa nulla se quando ci si accorge che
comando preso dall’elenco fornito insieme l’apparecchio ha reagito, il codice successivo
al telecomando è già stato trasmesso: è possibile infatti
Esempio: regolazione del telecomando per un invertire la direzione di ricerca premendo
televisore Panasonic. prima SET e poi, nuovamente, ON/OFF o
1. Dalla lista allegata, desumere ad es. il Play. Se nel frattempo l’apparecchio si è
codice Panasonic 154. -Assicurarsi di aver spento, per proseguire la ricerca sarà
scelto la lista giusta, cioè quella dei televisori necessario riaccenderlo, agendo per es.
(TV). sull’apparecchio o sul telecomando originale. -
2. Per preparare l’inserimento del codice Quando l’apparecchio reagisce, è possibile
premere brevemente i tasti SET provare anche altri tasti, senza dover uscire
(Impostazione), situati in basso a destra, e poi dalla ricerca. Qualora qualche tasto non
il tasto di apparecchio desiderato, ad es. TV, funzioni correttamente, basterà proseguire la
finché la spia (LED) resta accesa in ricerca agendo su ON/OFF o su Play.
permanenza. 6. Quando l’apparecchio reagisce
3. Premere in seguito uno dopo l’altro i correttamente, premere il tasto di
tasti numerici (ad es. 1 5 4). apparecchio, ad es. TV1, per terminare la
4. Una volta inserite le cifre, il LED si ricerca. La spia (LED) si spegnerà.
spegne e il telecomando è pronto per il UR 89 continua la ricerca là dove era stata
comando dell’apparecchio. interrotta. La ricerca termina automaticamente
5. In seguito, provare il codice di comando con il raggiungimento della fine dell’elenco dei
regolato cercando di comandare, nel caso codici. Il telecomando lampeggia allora
presente, il televisore. Se non succede nulla, rapidamente più volte di seguito. Il codice
o se non accade quanto dovrebbe accadere, inserito per ultimo resta memorizzato. La
tentare con un nuovo codice preso dall’elenco ricerca si interromperà dopo ca. 30 secondi di
oppure servirsi della funzione di ricerca del inattività.
codice (vedi sotto). Ricerca automatica del codice
6. La regolazione del telecomando per il
Il telecomando eseguirà nel giro di pochi
comando di altri apparecchi si eseguirà nella
secondi, quasi automaticamente, le
stessa maniera. Al posto del tasto di
impostazioni giuste:
apparecchio TV, premere un altro tasto, ad
1. Accendere l’apparecchio che si desidera
es. VCR, CBL/SAT(DVB,DECODER), DVD,
comandare (nel caso di un ricevitore da
TUNER, TAPE, CD, AMP.
satelliti, appare così, per es., un numero di
Ricerca del codice programma sul display dell’apparecchio).
Si raccomanda l’utilizzazione della funzione di 2. Per avviare la ricerca del codice
ricerca del codice qualora l’elenco non premere brevemente i tasti SET
comprendesse un apparecchio, o se il codice (Impostazione), situati in basso a destra, e
specificato non funziona. premere in seguito per più di 3 secondi il tasto
Ricerca manuale del codice di apparecchio desiderato, ad es. TV, finché la
1. Accendere l’apparecchio che si desidera spia (LED) resta accesa in permanenza.
comandare (l’apparecchio in questione sarà 3. Poi puntare il telecomando verso
già regolato su un programma). l’apparecchio che si vuole comandare, mentre
2. Per preparare la ricerca del codice il telecomando invia ogni 2 secondi un altro
premere brevemente i tasti SET segnale di ON/OFF.
(Impostazione), situati in basso a destra, e poi 4. Quando l’apparecchio reagisce,
il tasto di apparecchio desiderato, ad es. TV1, premere un qualsiasi altro tasto, eccetto SET,
finché la spia (LED) resta accesa in per terminare la ricerca del codice. – Qualora
permanenza. la ricerca sia stata terminata troppo tardi,
3. Poi puntare il telecomando verso proseguire la ricerca manualmente (vedi
l’apparecchio che si vuole comandare. sopra Ricerca manuale del codice).
4. Premere una volta brevemente il tasto 5. In seguito, provare il codice di comando
regolato cercando di comandare ad es.
ON/OFF (apparecchio ON/OFF). La spia
l’apparecchio DVD. Se non funziona
(LED) lampeggerà. – Ad eccezione della
correttamente, riavviare la ricerca del codice.
ricerca di codici TV, è possibile premere
La ricerca partirà dal codice successivo. - Non
brevemente anche il tasto giallo > (Play) ed
si dimentichi di riaccendere l’apparecchio
utilizzare così la funzione Play/Lettura per
(agendo sull’interruttore sull’apparecchio), per
eseguire una ricerca. Assicurarsi prima che
es. l’apparecchio DVD, se si desidera
negli apparecchi a nastro, nei lettori o nei
proseguire la ricerca.
recorder sia inserito un nastro oppure un DVD
o un CD. Identificazione del codice
5. Premere più o meno ogni secondo il E’ possibile in qualsiasi momento sapere qual
è il codice a tre cifre regolato:
tasto ON/OFF (apparecchio ON/OFF) o
Play (Lettura) finché l’apparecchio
(nell’esempio dato il lettore DVD) reagisce. -
Vivanco GmbH, Ewige Weide 15, D-22926 Ahrensburg, e-Mail: hotline@vivanco.de 6
7. UR 89 Universal Controller
1. Premere il tasto di apparecchio codici mancanti, distruzione deliberata e usura
dell’apparecchio di cui si desidera conoscere il naturale della scatola e dei tasti.
codice, ad es. TV.
2. Premere SET (Impostazione) e poi Code List:: TV
1,2,3, a seconda della cifra del codice che si TV
Brand
desidera conoscere. Esempio: se dopo aver
premuto TV, viene premuto SET+1, e il codice Acme 004,010
impostato è quello dell’esempio, ossia 154, la Acura 010
spia allora, non appena rilasciato SET+1, ADA 015
ADC 002,006
lampeggerà 1 volta per indicare che la cifra
001,002,003,020,050,054,109,1
delle centinaia è 1. Si tratta dunque di Admiral
87,196,197
contare. Premere e rilasciare SET+2 per Adyson 004,186,210,213
conoscere la cifra delle decine: la spia Agashi 187,206,212,214
lampeggerà in questo caso 5 volte per Agazi 003
indicare che la cifra delle decine è 5 (154). In Agb 124
seguito, premere e rilasciare SET+3 per Aiko 004,005,010
conoscere la cifra delle unità: la spia Aiwa 088,213
lampeggerà in questo caso 4 volte indicando 007,009,010,011,012,052,062,0
così il 4 in 154. - Per ricordarsi il codice, si Akai 69,070,071,134,142,170,206,22
1
consiglia di scriverlo ad es. su una targhetta AKI 206
adesiva da applicare poi sul dorso del Akiba 012,212
telecomando. Akito 026
Comando Akura 003,012,016,072,191,206,212
Il comando degli apparecchi avviene in modo 004,010,012,028,029,054,063,0
Alba 69,087,163,170,184,187,195,20
identico a quello già noto dei telecomandi 6,215,217
originali. La sola differenza consiste nel dover Albiral 038,206,207
premere prima un tasto di apparecchio, TV, Alkos 165
DVD ecc., per poter poi comandare Allorgan 021,027,195,212,219
l’apparecchio desiderato. Dato che i simboli Allstar 052
sul telecomando UR 89 possono essere Amplivision 004,209,214,228
diversi da quelli sui telecomandi originali, 003,010,012,014,031,069,070,0
Amstrad
occorrerà eventualmente provare tutti tasti per 72,075,109,124,226
individuare le funzioni di ciascun tasto. Anam 010,066,110
Anglo 010
Impostazioni e funzioni speciali 003,010,016,044,110,183,184,2
Anitech
1. Funzione “Volume Punch Through”: 24,231
per semplificare l’utilizzazione, i tasti di Ansonic 010,015
regolazione del volume (VOL+ e VOL-) ed il Arc En Ciel 046,127,140,204,207
Arcam 004
tasto MUTE agiscono sempre sull’ultimo Delta
apparecchio utilizzato per il comando audio, Aristona 016,052,170,195
qualora non sia previsto alcun comando audio Arthur 159
nel codice di comando dell’apparecchio Martin
attualmente selezionato. Esempio: si Art-Tech 212
comanda dapprima TV e poi si passa a DVD, ASA 001,017,018,019,050,111
sprovvisto di comando audio. In tal caso il Asberg 044,052,182,187,195
telecomando agirà automaticamente Astra 010
sull’audio del televisore, senza che si debba Astro 207,212
Sound
tornare prima su TV.
Asuka 003,004,012,212,214,218
2. Definizione di un apparecchio per Atlantic 004,021,022,052,170,182,197
Volume e Mute: premere il tasto di Atori 010
apparecchio dell’apparecchio che si vuole Audiosonic 004,010,012,021,052,140,170
utilizzare sempre per il comando audio, ad es. Audioton 004,182,231,233
AUX qualora il proprio ricevitore AV sia Ausind 044,212
collegato ad AUX. Per bloccare premere SET Autovox
001,003,004,021,044,058,102,1
e 5. Per sbloccare premere SET e 6. 26
Baird 140,198,200,206,232
Specificazioni tecniche Bang&Oluf 001
Pile: 2 pile rotonde, R03, UM4, AAA son
Portata: max. 7m Barcom 210
Non per apparecchi da 400 kHz Basic line 010,012,052,184,198,212
Bastide 004
2 anni di garanzia di fabbrica Baur 077,119,133,142,170
Se UR 89 si guasta nei 2 anni dalla data di Bazin 183,201,206,217
acquisto, Vivanco si impegna a sostituire Beknteknik 228
gratuitamente il telecomando. Eccezioni: Beko 008,035,084,214,228
Beon 052,170
Vivanco GmbH, Ewige Weide 15, D-22926 Ahrensburg, e-Mail: hotline@vivanco.de 7