Read this entire article for getting more information about Features, Advantages and Safety Measures of Diamond Concrete Cutting and Diamond Wire Cutting. For more detail contact us at 08009750891.

1. Diamond Concrete Cutting - An Ancient Technology
with Modern Touch
It is believed that Diamond
tools were widely used as
early as 2500 B.C in Egypt.
However with advancement
in the technology the use has
been put into many industries
such as Constructions,
Demolition, today’s
technologically advanced
tools are used in marvelous
designing projects, and
maintenance in the concrete
buildings.
Features:
 The sizes can vary from a small hand held saw to big walk behind motor powered
engines and other styles.
 The main components that Diamond Concrete Cutting saws can be powered are: Gas
(Fuel), Pneumatic or Hydraulic and Electric Motors.
 The uses can vary greatly from sawing concrete slabs, asphalt, stone to steel and many
more.
 The Blades needs to be cooled by water to prolong the longevity and remove/decrease the
dust particles.
Advantages:
 The Diamond Concrete Blades are faster than the traditional saw blades.
 Safe, Durable, and customizable as per the requirement.
 With proper care, long lasting life and faster cutting efficiency is achievable.

2.  From as small as 4 inch to as deep as 25 inch cut is possible with great precision.
Safety Measures:
The cutting procedure may seem to be very simple and fast, while in reality the practice is a bit
complex. Several considerations should be kept in mind while you lay your hand on the project.
 Personal Protective/Safety Equipment needs to be checked while operating Diamond
Concrete Saw to prevent any accidents from happening.
 Proper Industry Certifications such as OSHA, CPR is to be done to avoid any mishap.
Diamond Wire Cutting:
Diamond Wire Cutting saws are diamond electroplated beads studded together on a multi strand
steel cable. Unlike Diamond Concrete Cutting saw here the wire itself is the blade to saw. Two
types of Diamond Wire Saw Machine can be classified: Oscillating and Continuous. Diamond
Wire cutting is known as DWC in the industry.
Features and Uses:
 From cheap outdoor sawing branch type wires to heavy duty cutting wires for huge scale
construction is available.
 It is further used in cutting metal parts, cut delicate crystals in the labs, foam rubber and
stained glasses.
 Mining industry is one of the major applications of the Diamond Wire Saws in the quarry
to cut large slabs of stones from the bottom.
Advantages:
 Diamond Wire Saws holds smaller kerf than traditional blades.
 Precisions of the cut are unmatched.
 The diameters and lengths can be altered or increased as per the requirements of the
project.
 Cost efficiency is better than any modern cutting techniques available.

3.  Less waste of the material in Diamond Wire Cutting (DWC) as compared to the
traditional blades.
 Only water is used while cutting to clean and remove the debris from the saw and
materials unlike other saws that uses fluids.
 Large scale projects of cutting stones are possible due to DWC.
 The noise levels are low, minimal vibrations, flexibility and less damage to the structure.
 Large deep cuts and high accuracy of cuts are possible.