Since winter is ending and spring is about to begin, many people are getting excited about the chance of getting back on their motorcycles. Learn how to get your motorcycle out of winter storage and ready to hit the road.

1. Get Your Motorcycle Out of
Storage and Ready for Spring

2. North Carolina Motorcycle
Accident Attorney
Bob Karney is a Greensboro motorcycle accident lawyer that has
been representing North Carolina and South Carolina bikers for
more than 30 years.
Now that winter is on its way out, it’s time to get your motorcycle
out of storage and ready to hit the road. Here are a few tips on
getting your motorcycle bike-ready for the spring.

3. Step #1:
Check the Battery
Motorcycle batteries tend to die quickly, especially in the winter
months. For those who kept their battery trickle charged or used a
tender, the battery should be fine. But, it’s always a good idea to
look for corrosion and make sure everything is attached correctly.
Make sure that the battery can hold a complete charge before you
hit the road.

4. Step #2:
Check the Fuel
Some bikers use a fuel stabilizer, by doing so; the fuel should be
fine as long as it’s been less than a year. As a precautionary, it’s
always best to double check and make sure there isn’t any gunk
inside the tank.
If it looks like there is gunk, it’s best to completely drain the tank,
fuel lines, and carburetor before starting the engine. Make sure to
clean and look for signs of rust.

5. Step #3:
The Engine Oil
An important step is to inspect the oil. If it looks milky, water may
have leaked into the oil filter while in storage. If this has
happened, the oil and filter should be replaced.
If the oil wasn’t changed before storage, now is a great time to
replace the oil and filter as oil degrades when it sits.

6. Step #4:
Check for Leaks
While you’re checking over everything that contains liquids, be
sure to look over and search for leaks. This is the best time to fix
or replace before you hit the road.
Fluid leaks can cause serious problems to the motorcycle and can
leak on tires making them extremely slippery and dangerous.

7. Step #5:
Check the Tires
If you used a paddock stand to raise the tires off the floor, chances
are that the tires and suspension are in good shape. You should
still take time and inspect the tires before riding.
If the motorcycle rested on a kickstand, check to make sure the
tires have no stress marks, cracks or flat spots.

8. Step #6:
Motorcycle Chain
It’s easy to ignore the motorcycle chain, but it requires just as
much attention as other parts of the motorcycle.
A chain that is ignored can eventually fail, usually by breaking.
Make sure the chain is cleaned and well lubricated. You can
lubricate often as a well-oiled chain is much quieter and has a lot
less drag.

9. Step #7:
Brake Pads
Look at the brake pads and make sure that they are in good
condition and not worn. The pads should be inspected thoroughly
and if they appear to be worn out, they should be replaced
immediately.
Also, look at the level of the brake fluid. If the fluid is low, it should
be filled to the proper level.

10. By following these suggestions, you’ll be ready to hit the road this
spring.
Motorcycle safety is very important, take time and practice
braking, slow-speed techniques, and clutch control as some of the
most experience bikers can be a little rusty by not riding for
months.
If you or someone you know has been involved in a motorcycle
accident, contact Bob Karney, a motorcycle accident attorney in
Greensboro NC.

11. North Carolina Motorcycle
Accident Attorney
Karney Law Firm – Representing injured bikers since 1975.
Contact Karney Law Firm, by call 877-376-7982 and schedule a
free consultation. They will work proactively and aggressively to
get the settlement you deserve.