6. Thermoforming process [ FUSION ] Raw material : Cross linked PE foam blocks Sources: Palziv (IL.) or Tropal ( Ro.) Fabrication : the product is fabricated from several flat components with specific density and thickness that are fused together by heating and cooling under pressure. Process steps : Split the PE blocks to accurate thickness Die cut each component to a required form Separate the components from scrap material Load the components in specific molds Thermal process according to designated cycle Trim the product and inspect quality Secondary operation: apply adhesive if required Packing and marking .
7. PE blocks Splitting layers Die cut forms Molds Thermal presses Product and one component
8.
9.
10.
11. photo email phone number + mobile Function [email_address] + 972-4-606-2873 +972-50-667-4273 General manager-Israel- Raphael Halamish [email_address] 972--4-606-2835 +972-50-5920-850 V.P- Marketing Israel- Amos Nevo [email_address] 972--4-606-2757 +972-50-5784986 Customer Service Israel - Caroline Ehrlich [email_address] 40-356-409030 +40-727-803439 Customer Service Romania - Janina Robu [email_address] 972-4-606-4300 +972-50-7418054 Quality Assurance- Orna Rubin [email_address] 972-4-606-2657 +972-50-635-1037 Engineering manager- Ronen RIvlin
12. We’ll be glad to add information in specific areas , Please refer to the contact list . Our new web-site is now on air and contains new and updated information. See: www.foamotive.com . For any inquiry for new products please send your data to Amos Nevo- [email_address]