Vitesse 201 installation
Upcoming SlideShare
Loading in...5
×
 

Vitesse 201 installation

on

  • 2,500 views

SMC Enterprises Private Limited is the manufacturer of Vitesse brand of Tea, Coffee and Hot beverage vending Machines. Vitesse vending machines are suitable for dispensing all types of premix based ...

SMC Enterprises Private Limited is the manufacturer of Vitesse brand of Tea, Coffee and Hot beverage vending Machines. Vitesse vending machines are suitable for dispensing all types of premix based beverages. They are manufactured using latest technology. Vitesse vending machines are highly durable, robust and long lasting. Only best quality material is used in manufacturing which gives years of trouble free manufacturing and lowest cost of ownership. Vitesse hot beverage vending machines are backed by years of experience and service network of SMC Enterprises Private Limited. For any inquiry contact on +91 9811225804 or mail at info@vendingmachine.in or visit www.VendingMachine.in SMC Enterprises Private Limited is also distributor of Georgia Gold Coffee, Burn Energy Drinks, Parle Agro, Apeejay Typhoo Tea, Godrej Vending Machines and entire range of Del Monte products in India.

Statistics

Views

Total Views
2,500
Views on SlideShare
2,500
Embed Views
0

Actions

Likes
0
Downloads
6
Comments
0

0 Embeds 0

No embeds

Accessibility

Upload Details

Uploaded via as Microsoft PowerPoint

Usage Rights

© All Rights Reserved

Report content

Flagged as inappropriate Flag as inappropriate
Flag as inappropriate

Select your reason for flagging this presentation as inappropriate.

Cancel
  • Full Name Full Name Comment goes here.
    Are you sure you want to
    Your message goes here
    Processing…
Post Comment
Edit your comment

Vitesse 201 installation Vitesse 201 installation Presentation Transcript

  • Vitesse 201 Installation Guide Vitesse 201 Installation Guide SMC Enterprises Private Limited Manufacturer: Vitesse Vending Machines Distributors: Georgia Gold Coffee, Burn Energy Drink, Apeejay Typhoo Tea, Parle Agro, Godrej Vending Machines, Del-Monte. Branches at: Delhi, Noida and Gurgaon Contact us on 9811225804 Email: [email_address] www.VendingMachine.in
  • Unpacking the Machine
    • Cut the TAPE with a sharp knife.
    • Do not push the knife too hard.
    • Cut both side.
  • Unpacking the Machine
    • Hold the Machine and turn the Flaps outside of the box.
    • Do this with all four Flaps
    View slide
  • Unpacking the Machine
    • Pull out the Packing box.
    • Pull out the Protective covering.
    • Do not use any sharp object to do this.
    View slide
  • Unpacking the Machine
    • The Machine has Stainless Steel Top and Bottom which means longer its life.
    • The Drainage pipe is packed inside the Stainless steel Drip tray.
  • Unpacking the Machine
    • Please stand the machine on a Plane surface.
    • There must be a Gap of four (4) Inches between the machine and the nearest wall.
  • Unpacking the Machine
    • Keys of the machine are attached with the power cord.
    • Cut the tie carefully and detach the keys.
  • Filling Premixes in the Canisters
  • Filling Premixes in the Canisters
    • Push the canister upwards then pull out.
  • Filling Premixes in the Canisters
    • Turn the Elbow spout upwards to not let the Premix get waste.
  • Filling Premixes in the Canisters
    • Pour the premix in the canister slowly.
    • DO NOT OVEFILL the Canisters
  • Filling Premixes in the Canisters
    • Re-cap the canister properly after filling.
    • Please Re-cap the canisters after every filling.
  • Filling Premixes in the Canisters
    • There is a male groove in the machine and a female groove on the Canister.
    • Please match them (male to female) when fixing the canisters.
  • Filling Premixes in the Canisters
    • Fix the Canisters properly.
    • Turn the elbow spouts downwards to the mixing bowls.
  • Installation of the Machine
    • Switch on the Machine only after Putting the Water bottle on the Top.
  • Installation of the Machine
    • When the heating indicator is on it means the machine is getting ready.
    • When it's off Machine is ready to serve
    • The temperature of Dispenses can be controlled Manually.
    Heating Indicator Temperature controller Machine is ready to serve when the indicator is off
  • Installation of the Machine
    • Put the cup on the located place.
    • Select your Choice.
  • Installation of the Machine
    • Please Do not touch the dispenses they are extremely hot.
    • Grab your cup.
  • SMC Enterprises (P) Limited Contact Us: 0120 – 4217266 [email_address] http://www.vendingmachine.in/