1. Frequently Asked Question & Tips of Felt Pads
How to install the felt pad floor protector?
where you will be applying the felt pad, such as bottom of a chair leg, with a dry rag.
Use a small amount of soap and water to clean the area if there is any buildup to
create a smooth, clean surface for the felt pad to adhere to.Peel the paper off the
adhesive back of the felt pad and press it firmly onto the bottom of the piece of
furniture and hold for around 10 seconds to create a tight seal. Or, lightly tap the pad
onto the leg with a hammer if you are using a tap-in felt pad.
Can I install the felt pad floor protector over the old protector?
No, you should remove the old protector completely, including adhesive, and then
depending on the leg bottom condition, prep as necessary. See maintenance tips
How can I remove the old protector?
Use a beveled wood chisel or a small ‘catspaw”. The catspaw also is great for
removing small nails or tacks.Both are available at a hardware store. Use care and
don’t damage the wood.
What side protector do I need?
Choose either self-adhesive or tap-in ones, and the sizes and thicknesses that best fit
your needs. Felt pads come in all sizes and thicknesses -- choose a thicker pad for

2. heavier furniture -- as well as even large un-cut squares of self-adhesive felt, so you
can cut the shape you need to custom-fit furniture bottoms with unusual shapes.
Do I need to add adhesive?
No, with PSA( Pressure Sensitive Adhesive) which is the type of adhesive used on
floor protectors. Additional adhesive will actually weaken the bond. PSA is used for
this application because it doesn’t harden. An adhesive that hardens and becomes
brittle will eventually fracture and fail for this type of application.
How long will the felt pad floor protector last?
The life of the pads will depend on many variables:
Type of floor surface Condition of chair
Condition of floor surface Quality of installation
Cleanliness of floor Maintenance
Climate/ Season Traffic
Size of protector
Tips & Warnings
For the felt and fabric, use colors that match your chair legs so that people won't
notice them. Alternately, use a color that complements the chair in order to enhance
the design.
Be sure to wash your fabric pieces and felt pads every few months.
Regularly check the felt pad is under the bottom of chair.
Prodigy is a professional manufacturer & supplier of felt pad, adhesive EVA pad,
furniture slider, felt with nail pad and more furniture accessories. For more furniture
accessories information, welcome to read at www.gzprodigy.com.