MONA 98765-12871 CALL GIRLS IN LUDHIANA LUDHIANA CALL GIRL
Stars 8
1. Get inspired by our 350 stars products
all ready for fast and reliable delivery.
STARS 8
www.rs-components.com
2. WELCOME TOOL SETS
FAST &
RATCHET SPANNER SET MECHANICAL SCREWDRIVER SET
CONTENTS • Low profile ratchet wrench and 9 low profile adaptors
NEW • 18 piece screwdriver set containing popular sizes for
NA
RELIABLE:
to create 11 ultra light and compact alternatives to a mechanical and general purpose environments
socket and ratchet • Supplied in a blow moulded case
• Ideal for on-site maintenance • Go to RS Online for more details
3
• Contents: ratchet: 14 x 19 mm, 5 rings: 8 to 12 mm,
TOOL SETS
Your needs, 4 rings: 13 to 17 mm NA NA
our commitment
4 HAND TOOLS
6 TEST & MEASUREMENT
7 TEST & MEASUREMENT
8 WORKPLACE
9 FASTENERS & FIXINGS
669-8243 11 Piece ratchet spanner set
459-3972 18 Piece mechanical screwdriver set
10 SWITCHGEAR
SOCKET AND SCREWDRIVE BIT SET
ADJUSTABLE SPANNER SET
• High quality, anti-corrosion finish
NA
• Ultra compact ¼ '' tigthening and screwing set
NEW • Adjustables incorporate graduated 15 degree angled head
11 PROCESS CONTROL • Contents: ¼ " Sockets 5.5 to 14 mm, Bit Holder, Slot,
Pozidrive, Phillips, Torx Bits
• Greater accessibility plus ergonomic design for user comfort
• Sizes: 6, 8 & 10''
12
NA
PROCESS CONTROL EQUIPMENT
NA
13 RELAYS
14 CABLES
15 CABLE ACCESSORIES
478-0700 3 Piece adjustable spanner set
16 CONNECTORS COMBINATION SPANNER SETS NA
669-8212 38 Piece socket and bit set • Manufactured in carbon steel, with polished chrome plated finish
18 SOUNDERS, BEACONS, SENSORS
Dear Customer, CUTTER & PLIER SET
• Supplied in plastic wallet
• Go to RS Online for more details
NA
20
• A low cost series of general purpose light duty pliers and cutters
FLUID MANAGEMENT In this edition of the Stars magazine, RS offers you a wide range of • The stainless steel pliers have PVC handle grips fitted with quick return coil springs NA
products for your daily needs. Whether you are designing a new product
or performing maintenance on a production line, discover more than 350
23 HEALTH & SAFETY products of leading manufacturers in the market such as TE, Phoenix
Contact, Knipex, LeCroy and many more. NA
Please visit our website at www.rs-components.com to locate your local
RS distributor.
Terms and conditions: Customers shall deal with RS Components Limited's appointed distributor in the relevant territroy. The distributor will be soley responsible for the resale of
products and services in this catalogue and the customer should therefore contact the distributor directly if there are any issues in relation to such products or services. All offers
are available while stocks last. RS is trademark of RS Components Limited. An Electrocomponents Company.
EU_0075 – 06/11
Place FSC
logo here
184-8049 10 Piece imperial combination spanner set
536-458 5 Piece cutter & plier set 184-8033 10 Piece metric combination spanner set
2 STARS 8 For more products visit www.rs-components.com STARS 8 3
3. HAND TOOLS
HEXAGON BALL DRIVERS NA
DYNAGRIP CARTRIDGE KNIFE NA
Awarded Design
• Suitable for all types of hex screws • High quality cutting knives with retractable snap-off blades
• Balldriver allows screws to be tightened or loosened at angles up to 25° • ‘Click-action’ slider indicates when new blade auto-feeds into position
• Gorilla grip handle stronger than steel • Storage for up to six blades
VDE Diagonal Cutter
NA NA the indispensable diagonal cutter for all-round use
highqualitymaterialandpreciseworkmanshipforlong distinctive VDE Design
service life
precision cutting edges for soft and hard wire
rounded collar edges
reduce uncomfortable
pressure points
Cutting capacities
recess in the collar
KNIPEX-No. RS-No. mm Ø mm Ø mm Ø mm helps guiding
353-4512 Dynagrip cartridge knife, 18 mm blade 70 06 125 500-1468 125 3,0 2,3 1,5 plierspreciselyand
securely
70 06 140 158-5322 140 4,0 2,5 1,8
70 06 160 158-5338 160 4,0 2,8 2,0
MICRO TECH SLOTTED BLADE DRIVERS NA
70 06 180 442-0852 180 4,0 3,0 2,5
541-7324 Triple pack ball ended hexagon keys • For use within precision engineering, micro electrics and electronics applications durable injection-
• Handles have revolving ends and colour coded moulded marking
• Blades are chromed with burnished tips
MEASURING TAPES VDE High Leverage Diagonal Cutters
• Combination stainless steel and ABS rubber casing
NEW
with forged-on axle for heaviest duty
for drop and shock resistance NA
• Twin position tape lock mechanism
suitable also for piano wire
high cutting performance with minimum effort
NA Cutting capacities
KNIPEX-No. RS-No. mm Ø mm Ø mm Ø mm
74 06 160 600-7681 160 3.40 2.50 2.00
74 06 180 158-5344 180 3.80 2.70 2.20
74 06 200 396-6076 200 4.20 3.00 2.50
104-3907 Micro-tech slotted blade driver, 35 x 1.5 mm
104-4124 Micro-tech slotted blade driver, 35 x 1.8 mm
104-3913 Micro-tech slotted blade driver, 35 x 2 mm VDE Snipe Nose Side Cutting Pliers
®
104-3929 Micro-tech slotted blade driver, 35 x 2.5 mm IEC 60900 DIN EN 60900 VDE KNIPEX Alligator VDE
104-4130 Micro-tech slotted blade driver, 75 x 2 mm Water Pump Pliers, insulated
104-4146 Micro-tech slotted blade driver, 75 x 2.5 mm high loadable, elastic precision points
104-3935 Micro-tech slotted blade driver, 75 x 3 mm half-round, long jaws DIN ISO 8976 IEC 60900 DIN EN 60900
686-6137 104-4152 serrated gripping surfaces
Measuring tape 8 m x 25 mm Micro-tech slotted blade driver, 75 x 3.5 mm
self-lockingonpipesandnuts:noslippingontheworkpieceandlow
686-6130 Measuring tape 10 m x 25 mm 104-3941 Micro-tech slotted blade driver, 75 x 4 mm with cutting edges for wire max. dia. 3.2 mm
handforce required
favourable lever action: optimum transmission of force
Cutting capacities
MAGNETIC PICK UP NA
DIAGONAL CUTTER PLIER NA
adjustment
RETRIEVING TOOL • Drop forged steel jaws
KNIPEX-No. RS-No. mm Ø mm Ø mm KNIPEX-No. RS-No. mm Ø Zoll Ø mm mm positions
• For picking up components and hardware from areas of • Dual component handle grips and finger guards
26 16 200 158-5372 200 3.20 2.20
difficult access with durable non-slip grip
26 26 200 158-5388 200 3.20 2.20 88 06 250 396-6060 250 2 50 46 9
• Flexible chrome plated shaft may be bent to set position
for manoeuvrability
NA NA
VDE Cable Shears
IEC 60900 DIN EN 60900 VDE KNIPEX Cobra® VDE
Hightech Water Pump Pliers, insulated
for cutting copper and aluminium cables
DIN ISO 8976 IEC 60900 DIN EN 60900
easy cutting with one-hand operation
not suitable for steel wire and adjustment by shifting the jaw directly on to the workpiece: fast,
hard drawn copper conductors secure and comfortable handling
precision ground, hardened blades opening at the touch of a button off the workpiece
Cutting capacities adjustment
KNIPEX-No. RS-No. mm Ø Zoll Ø mm mm positions
449-9561 Magnetic retrieving tool, 460 mm, Ø 9 mm 487-242 Diagonal cutter plier, 127 mm KNIPEX-No. RS-No. mm Ø mm mm2
95 16 165 158-5417 165 15 50 87 26 250 705-5959 250 2 50 46 24
95 16 200 222-2606 165 15 50
4 STARS 8 For more products visit
4. TEST & MEASUREMENT TEST & MEASUREMENT
T5 600 & T5 1000 ELECTRICAL TESTERS DIGITAL THERMO HYGROMETER FLUKE 179 ELECTRONICS COMBO SET FLUKE 374 AND 375
• Automatically measures ac & dc volts
NA
• Cost effective instrument with integral stand
NA
• True RMS measurements
NA
• Large backlit display
NEW
• Displays resistance up to 1,000 Ω • Records min/max values and indicates comfortable or dry RH conditions • 0.09% Basic dc accuracy • 600 A ac and dc current measurement with fixed jaws
™
• Easy and accurate OpenJaw current measurement • Powered by 2 x AAA cells (not supplied) • 6,000 count digital display • 2,500 A ac current measurement with optional iFlex
• Protected to 600 V (T5-600) and 1000 V (T5-1000) for use in CAT III environments • Go to RS Online for more technical details • Min/max/average recording flexible current probe
• Power from 2 x AA cell • Set contains: Fluke 179 multimeter, TL224 SureGrip silicone test leads, • 600 V ac (true rms) and dc voltage measurement
• Go to RS Online for more technical details NA NA TL910 electronic test probes, AC280 SureGrip hook clips, 80BK integrated
NA • Safety rating CAT IV 600 V, CAT III 1,000 V NA
DMM temperature probe • Fluke 375 feature: 500 mV dc measurement range
• Go to RS Online for more technical details to interface with other accessories, frequency
measurement and low pass filter for stable readings in
noisy environments
• Go to RS Online for more technical details
291-9372 T5-600 electrical tester, 600 Vdc, 100 Aac
292-1230 T5-1000 electrical tester, 1,000 Vdc, 100 Aac
212-124 ETHG 880 digital thermo-hygrometer
292-1246 Carry holster
DIGITAL POCKET MULTIMETER NA
SINGLE OUTPUT POWER SUPPLY UNIT NA
• Integral non-contact ac voltage detector with visual & audible indication
(50 Vac to 600 Vac, 50 to 500 Hz)
• Rugged, high specification units suitable for both industrial and educational use 705-1939 FLUKE 374 clampmeter, 600 A, ac/dc
• 11 functions/ 32 ranges
• Separate 3 digit LED voltage and current meters 705-1935 FLUKE 375 clampmeter, 600 A, ac/dc
• 1,000 V ac/dc measurement range and 10 A ac/dc measurement range
• Supply voltage: 100/120/220/240 V and 50/60 Hz, switchable
• -20 to 800 °C type K temperature measurement input & sensor
• 2 units can be connected for series or parallel operation
• Go to RS Online for more technical details
• Resistance/ continuity and diode test NA
PH STICK METER NA
NA
• Min/max & display HOLD
• A low cost instrument detachable combination pH probe
• Conforms to EN61010-1 (safety rating) CAT III 600 V, CAT II 1,000 V
132-176 Fluke 179/EDA2 electronic combo set • pH range: 0 to 14 pH
• Go to RS Online for more technical details
• Operating temperature range: 0 to 50 °C
• Go to RS Online for more technical details
LUX 1335//1337 DIGITAL LIGHT METERS NA
NA
• Hand held digital light meters which measure light intensities in lux with the
sensor connected by a 1 m coiled lead
• Measurement range: 0 to 400,000 lux or 0 to 40,000 fc (Lux 1335), 0 to 20,000 lux
or 2,000fc (Lux 1337)
• 4 ranges/times covered (Lux 1337), 5 ranges/times covered (Lux 1335)
• 4,000 count reading with instant bar graph indication (Lux 1335 only)
NA
• Go to RS Online for more technical details
325-6004 IPS303DD Single output PSU, 0 - 30 V, 0 - 3 A
INDOOR & OUTDOOR THERMO & NA
697-4027 IDM62T digital pocket multimeter
214-855 pH stickmeter
HYGROMETER CLOCK 214-849 Replacement electrode
• Displays time, temperature (select indoor or outdoor) and relative humidity CLAMP MULTIMETERS NA
• 3 m external temperature sensor
• 0 to 40 °C (resolution 0.5 °C) ambient operating temperature
• Measure ac and dc current up to 300 A ALLIGATOR CLIPS NA
• 22 mm diameter conductor jaw capacity • Multi-purpose tooth pattern grips anything from fine gauge wire
• Min/max temperature and humidity memory recall
NA • 1.0 % basic dc/ac current accuracy to ¾ " bolt (20 mm 19.05 conversion)
• Powered by 1 x AAA battery (supplied)
• 4,000 Count LCD display • Nickel-plated steel jaws
• Go to RS Online for more technical details
• Safety to EN 61010-1 CAT III 300 V, CAT II 600 V • Safety rating CAT IV 600 V, CAT III 1,000 V
NA
• Supplied with carrying case, test leads and two AA batteries • Recommended for use with TL224 test leads
• Go to RS Online for more technical details • Go to RS Online for more technical details NA
697-3963 ICM30 clamp multimeter, 300 A ac/dc 697-3822 ILM1335 light meter LCD display
408-6109 Indoor & outdoor thermo- & hygrometer clock 697-3967 ICM30R clamp multimeter, 300 A ac/dc, rms 697-3834 ILM1337 light meter LCD display 451-1431 AC285 alligator clips for T5 testers
6 STARS 8 For more products visit www.rs-components.com STARS 8 7
5. WORKPLACE
LIGHT DUTY SACK BARROW NA
FUNNEL SET NA
• Easily fits into a car boot folded, easy to unfold and ready to use in seconds • Five polypropylene funnels in different sizes,
• Manufactured from aluminium, steel and reinforced plastics unbreakable in normal use
• Roller bearing wheels with solid polymer tyres
• Elasticated fastening straps to secure load
NA NA
263-2637 5 funnel set with handle
SERVICE CASE ORGANISER NA
• 4 professional service cases (2 with 15 compartments and
2 with 17 compartments), this organiser unit is ideal for the
storage of small components on bench top or in a vehicle
NA
477-4698 Light duty folding sack barrow
STANDARD STORAGE BOXES NA
• Functional design with integral moulded secure closing catch and hinges
• Ideal for the storage of small components and related sundries
• All boxes are black with translucent lids
NA
247-8089 Service case organiser, 310 x 265 x 375 mm
NYLON CONTRACTOR CASE NA
• 12 open tool pockets in various sizes and document pockets
• Removable clipboard for A4 pad with elasticated pen holder
623-9787 Storage box, 18 compartments
• 11 elasticated tool pockets for pliers, rule, screwdrivers, etc.
623-9771 Storage box, 21 compartments
• Business card pockets and hook and sealed pocket for mobile phone
or calculator
MULTI ANGLE BASE VICE NA
• Case supplied without tools NA
• Infinite and lockable positioning achieved with a swivel ball design
• Easily attatched to most work surfaces with integral screw clamp
• Removalble jaw pads protect surfaces from marring and damage
NA
667-7189 Multi-Angle Steel Vice 435-0270 Nylon contractor case, 282 x 60 x 38 mm
8 STARS 8 For more products visit
6. SWITCHGEAR PROCESS CONTROL
JOYSTICK CONTROLLER PANEL DOOR MOUNTED THREE PHASE MONITORING TERMINAL BLOCKS
• 54 mm long operating shaft
NA
SWITCH DISCONNECTORS
NA
RELAYS NEW • Ex PI-EX-TB - Ex-basic terminal block with knife
NA
• 1 N/O contact per direction • Padlockable in OFF position, up to 3 padlocks and non-locking versions • Monitoring of three-phase mains for phase sequence disconnection and test connections
• Available in 2 and 4 direction • Ingress protection to IP65 (can be switched off), phase failure, over- and • Ex PI-EX-TB/T - Ex-basic terminal block with knife
undervoltage as well as phase unbalance disconnection and integrated temperature measurement
• 2 and 3 pole versions have built in neutral and earth connections
• Automatic phase sequence correction configurable • Ex TT-PI-EX-TB/T - Ex-basic terminal block with isolating
• Rated operating voltage: 690 Vac
NA NA • Threshold values for phase unbalance, over- and NA connector, test connections and surge protection with NA
• Switching power quoted for 380 - 440 Vac
undervoltage are adjustable as absolute values additional temperature measurement
• Go to RS Online for technical details or more switch connectors
• Tripping delay can be adjusted or switched off by means • Ex TT-PI-EX-TB - Ex-basic terminal block with isolating
of a logarithmic scale connector, test connections and surge protection
• ON-delayed or OFF-delayed tripping delay selectable
• Go to RS Online for more technical details
609-6776 XD4PA12 joystick controller
609-9860 XD4PA22 joystick controller
709-9619 Terminal block Ex TT-PI-EX-TB
609-9876 XD4PA24 joystick controller
709-9600 Terminal block Ex TT-PI-EX-TB/T
709-9603 Terminal block Ex PI-EX-TB
MINI CAM SWITCHES NA 257-9356 1P IP65 switch disconnector, 20 A, 6.5 kW
709-9606 Terminal block Ex PI-EX-TB/T
• A range of adaptable cam switches which can be used for panel building, 257-9384 2P IP65 switch disconnector, 20 A, 6.5 kW
703-5113 Three-phase monitoring relay CM-MPN.52
HVAC and motor control applications 219-1401 3P IP65 switch disconnector, 20 A, 6.5 kW
703-5117 Three-phase monitoring relay CM-MPN.62 SINAMICS G120 POWER MODULES
• Conform IEC60947-3 NA
703-5126 Three-phase monitoring relay CM-MPN.72 • The Sinamics G120 range of inverter drives for controlling an AC motor
• For technical details and more switches (different number of poles or
position types) go to RS Online Z15 SERIES BASIC SWITCHES • These frequency converters comprise a modular system which allows
NA
the user to select the G120 control unit suitable for their application as
NA
• High precision basic switch in a wide range of variations DIGITAL EXPANSION MODULES NA
well as the power unit suitable for their motor requirements
• Large switching capacity • Inputs/Outputs - DM8 series: 4 • Go to RS Online to see the whole range
• Contact configuration: SPDT • Dimensions - DM8 series: H: 90 mm, W: 36 mm, D: 55 mm NA
• Contact rating: 250 Vac 15 A, 14 Vdc 15 A • Go to RS Online for more technical details
• Contact gap: 0.5 mm
NA
• Connection method: screw terminals
• Mechanical life: 20³ operations minimum NA
704-3865 Power module PM240 0.37 kW
705-1125 Mini Cam Switch, 10 A, 1P 0-1 position type
,
704-3899 Power module PM240 5.5 kW
705-1134 Mini Cam Switch, 10 A, 2P 0-1 position type
,
704-3919 Power module PM240 22 kW
705-1137 Mini Cam Switch, 10 A, 3P 0-1 position type
,
704-3925 Control unit CU240S PROFIB
705-1131 Mini Cam Switch, 10 A, 4P 0-1 position type
,
704-3912 Control Unit CU240E RS485
469-1616 Digital module, 12/24R
704-3916 Control Unit CU240S RS485
386-0366
DOOR COUPLING ROTARY Panel mount roller plunger limit switch 469-1666 Digital module, 230R
MECHANISM NEW 386-0372 Panel mount plunger limit switch
ACS 310 STANDARD 3 PHASE
386-0423
NEW
Hinge roller lever limit switch
• Allows fast and simple assembly, for example, 386-0417 Short hinge roller lever limit switch E5GN DIN DIGITAL NA
INVERTERS
of motor starters and reversers
436-0182 Panel mount cross roller plunger limit switch TEMPERATURE CONTROLLERS • Energy optimizer and load analyser for automatic
• Size: S0 - S3 x 330 mm optimisation of the drive, motor and process
• 48 x 24 mm basic temperature controller with
enhanced functions and performance • Embedded Modbus RTU (EIA-485) fieldbus interface
NA
STAYPUT SELECTOR SWITCHES NA • Improved indication accuracy and preventive • Optional Basic and Advanced control panels available
maintenance function separately NA
• Double Insulated Bezel
• Size: 1 / 32 DIN • 5 digital inputs, 1 digital and 1 relay output,
• Head automatically retained in position within cut-out NA
and PTC/PT100 input and pulse train output
• IP65 Rating • Go to RS Online for more technical details
(16 kHz max)
• Operating Temperature Range -25 to 70 °C
• Go to RS Online to see more technical details
• Standard: IEC, JIS and the full module
NA
• Go to RS Online for more technical details
712-1139 E5GN-C1LD-C Temperature controller, 24 ac/dc
712-1132 E5GN-C1TD-C Temperature controller, 24 ac/dc 705-4773 3 Phase inverter, 2.1 A, 0.55 kW
706-2008 Door-coupling rotary mechanism, black 712-1129 E5GN-Q1TD-C Temperature controller, 24 ac/dc 705-4776 3 Phase inverter, 2.6 A, 0.75 kW
706-1992 Door-coupling rotary operating, black 712-1123 E5GN-C1T-C Temperature controller, 100 - 240 ac 705-4782 3 Phase inverter, 6.2 A, 2.2 kW
706-2002 Door-coupling rotary mechanism, red/ yellow 331-0265 2 Position stayput selector switch, 22 mm 712-1113 E5GN-R1T-C Temperature controller, 100 - 240 ac 705-4786 3 Phase inverter, 8 A, 3 kW
706-2005 Door-coupling rotary operating, red/ yellow 331-0271 3 Position stayput selector switch, 22 mm 712-1135 E5GN-C1L Temperature controller, 100 - 240 ac
-C 705-4795 3 Phase inverter, 9.7 A, 4 kW
10 STARS 8 For more products visit www.rs-components.com STARS 8 11
7. RS Components:
Adding Value, Reducing Cost
4 great suggestions from RS Components to save you money.
Using RS Components as a virtual RS Components’ 500,000 product range By placing forward orders for products A low volume low value programme with
stocking warehouse enables you to and 97.7% line fill service offer gives you identified as frequently consumed RS Components provides you with the
reduce levels of albeit critical items an opportunity to rationalise your supplier provides the following benefits: following benefits:
enabling the following benefits: base providing the following benefits:
• Reduction in cost associated with raising • Allows purchasing to dedicate more
• Reduction of capital employed • Reduction in number of invoices due to ad-hoc orders time to negotiate better terms for capital
• Less obsolescence consolidation • Improved service levels as stock profile is purchases or higher volume commodities
• Less waste • Less cost in accounts payable enhanced • Cost reduction in paper based requisitions
• Less admin costs to manage inventory • Negotiation on prices with higher AOF • Better prices due to column breaks • Improved visibility due to management
• Improved and consistent service levels • Reduction in costs in accounts payable information
• Less insurance for value of stock
• Less cost in engineering for product • Improved efficiency and output due to • More efficient ordering process
• Less space required
selection / location service levels • Less mistakes due to wrong products or
• Improved efficiency and output due to quantities
reduced down-time • Reduction in costs in purchasing due to
fewer quotes
Call us for an obligation free visit to see where
we could help your company save money!
8. PROCESS CONTROL EQUIPMENT RELAYS
DIGITAL THERMOSTATS BATTERY CONDITION INDICATORS DRACN SERIE, SOLID STATE LED LUMINOUS BLOCKS
• 3 digit red LED display
NA
• For use with dc and rectified ac only
NA
INERFACE RELAYS NEW • LED luminous blocks with screw terminals
NA
• 34 x 77 mm fascia (29 x 71 mm cut-out) • Suppressed zero scale • 6.2 mm DIN-rail mount (35 mm) SSR assembly • Block for fixing at the front on the adaptor (M22-A)
• J-type thermocouple input • Snap-in panel fixing • Ratings 24 Vdc at 3.5 A, 48 Vdc at 100 mA and 240 Vac at 2 A • Standards: IEC/EN60947
• On-off control • Electrical connections 25 mm x ¼ " spade terminals, push-on • 5 and 24 Vdc and 120 V and 240 Vac control voltage • Go to RS Online for more technical details
• Single output connectors or solder terminals • UL and cUL recognised at 40 °C,
• High/low setpoints NA NA
100 K-cycle endurance test NA NA
• Probe offset adjustment • Yellow LED input status indicator
• Go to RS Online for more
technical details
720-3981 Solid state relay, 0.1 A, 48 Vdc, 6 mA
399-3731 White front fixing LED, 85 - 230 Vac
720-3984 Solid state relay, 0.1 A, 48 Vdc, 7 mA
399-3753 Green front fixing LED, 85 - 230 Vac
720-3972 Solid state relay, 3.5 A, 24 Vdc, 9 mA
399-3747 Red front fixing LED, 85 - 230 Vac
244-913 Battery condition indicator, 12 V 720-3978 Solid state relay, 3.5 A, 24 Vdc, 10 mA
244-929 Battery condition indicator, 24 V 720-3997 Solid state relay, 2 A, 240 Vac, 7 mA
720-3988 Solid state relay, 2 A, 240 Vac, 15 mA
SOLID STATE RELAYS NA
461-206 3 digits, J Type, 1 relay, 230 V MOTOR VOLTAGE REGULATOR NA
• 600 V blocking capacity
461-244 4 digits, NTCH, 2 relay, 230 V • A variable speed regulator unit is for use with electric motors, 1 PHASE POWER SUPPLY UNITS • SCR Output
miniature drill equipment etc.
• Wide -range Input, 100 to 240 Vac
NEW • Internal snubber circuitry
• Its very small size which allows it to be easily installed, • Filter, cover and thermal pads available
POTENTIOMETER NA
especially where space limitation is an important factor
• DC-OK Relay Contact
• Terminal Type Screw; Saddle Clamp
• Quick-connect Spring-clamp Terminals NA
• 1 Quadrant • Maximum current 3 A continuous, 5 A peak • Input-output Capacitance: 8 pF
• 150 % peak load capability
• Panel mountable NA • Isolation Voltage 4 kV rms
• Full power between -25 and 60 °C
• Small size • Dimensions: 22.9 x 58.4 x 45.7 mm
NA
• ATEX Approved
• Motor power 5-80 W • Go to RS Online for more technical details
• Standards: EN 61558-2-17 EN/IEC 60204-1, EN 50178,
,
• Load compensation Rxl IEC 62103
NA
• Adjustable current limit • Go to RS Online for more technical details
• EMC tested (CE marked)
• Overload and short circuit protected
346-895 Solid state relay, 10 A, 24 - 280 Vac
238-9816 Motor voltage regulator, 6-15 Vdc, 3 A
711-5960 1 Phase power supply unit, 24 V, 10 A 346-918 Solid state relay, 25 A, 24 - 280 Vac
711-5979 1 Phase power supply unit, 24 V, 20 A 352-525 Solid state relay, 40 A, 24 - 280 Vac
510-1215 Potentiometer drive board, 3 A, 12 - 32 Vdc
STEPPER MOTORS WITH/WITHOUT NA
711-5966 1 Phase power supply unit, 24 V, 5 A 346-687 Solid state relay, 50 A, 24 - 280 Vac
REAR SHAFT EXTENSIONS
DC MOTORS • Some motors have 8-lead configuration allowing maximum flexibility C60H DC CIRCUIT BREAKERS PNOZ X3 SAFETY RELAYS
• Motors available in a selection of speeds, input voltages and
NA
for connection to any standard stepper motor drive boards
• C curve - Overcurrent protection for any type of application
NEW NA
• Input: 2 channel detects shorts across the input contacts or 1 channel
• The windings can be connected in series or parallel for different
output torques • Compatible with C60 auxiliaries and accessories • Feedback control loop for monitoring external relays/contactors
drive requirements
• Ideal for development and education projects, demo rigs, test rigs • Standards: IEC 60947 EN60947-2 GB14048.2
.2 • LED indication: channel 1 and 2
• A number of the motors are supplied with 0.1 " connector fitted to NA
and simple or low cost movement or placement applications • Go to RS Online for more • Relay output: 3 N/O, 1 N/C and 1 S/C
the flying lead, all are supplied with leads
• To see the full range and all technical details go to RS Online technical details and the • DIN rail mounting
NA full module NA
• Standards: BS EN 60204-1 NA
• Go to RS Online for more technical details
238-9709 DC motor,4,600 rpm, 1.5 - 3 V, Ø 23.8 mm 711-6929 1 Pole circuit breaker, 250 Vdc, 1 A
238-9692 DC motor, 8,200 rpm, 1.5 - 3 V, Ø 21 mm 711-6938 1 Pole circuit breaker, 250 Vdc, 20 A
238-9715 DC motor,10,668 rpm, 6 - 15 V, Ø 27 mm
.6 440-458 Stepper motor w/ rear shaft, 12 V, 500 mNm 711-6931 1 Pole circuit breaker, 250 Vdc, 25 A 245-1848 Safety relay with LED, 24 Vac, 24 Vdc
238-9737 DC motor,12,600 rpm, 6 - 15 V, Ø 27 mm
.7 440-420 Stepper motor w/o rear shaft, 5 V, 70 mNm 711-6935 1 Pole circuit breaker, 250 Vdc, 32 A 239-1061 Safety relay with LED, 110 Vac, 24 Vdc
238-9721 DC motor, 26,000 rpm, 3 - 7 V, Ø 27 mm
.2 .7 440-436 Stepper motor w/ rear shaft, 12 V, 70 mNm 711-6944 1 Pole circuit breaker, 250 Vdc, 40 A 245-1854 Safety relay with LED, 230 Vac, 24 Vdc
12 STARS 8 For more products visit www.rs-components.com STARS 8 13