Scaling energy per operation via an asynchronous pipeline
Et0027 design and fabrication of keyway (slotting fixture) attachment for conventional lathe
1. ECWAY TECHNOLOGIES
IEEE PROJECTS & SOFTWARE DEVELOPMENTS
OUR OFFICES @ CHENNAI / TRICHY / KARUR / ERODE / MADURAI / SALEM / COIMBATORE
OUR OFFICES @ CHENNAI / TRICHY / KARUR / ERODE / MADURAI / SALEM / COIMBATORE
BANGALORE / HYDRABAD
BANGALORE / HYDRABAD
CELL: +91 98949 17187, +91 875487 1111 / 2111 / 3111 / 4111 / 5111 / 6111 / 8111
CELL: +91 98949 17187, +91 875487 1111 / 2111 / 3111 / 4111 / 5111 / 6111 / 8111
VISIT: www.ecwaytechnologies.com | www.ecwayprojects.com
VISIT: www.ecwaytechnologies.com | www.ecwayprojects.com
Mail to: ecwaytechnologies@gmail.com | ecwayembedded@gmail.com
Mail to: ecwaytechnologies@gmail.com | ecwayembedded@gmail.com
DESIGN AND FABRICATION OF KEYWAY (SLOTTING FIXTURE)
ATTACHMENT FOR CONVENTIONAL LATHE
Abstract
Mechanical engineering without production and manufacturing is meaningless and
inseparable. Production and manufacturing process deals with conversion of raw
materials inputs to finished products as per required dimensions specifications and
efficiently using recent technology
In order to perform different operation in a lathe such as different type of turning,
chamfering, polishing, grooving, thread cutting, filling, knurling etc. In this project we
have to decide that the keyway operation can be done using conventional lathe with help
of keyway attachment. Our project is based on the need for the work holding devices.
This fabrication which will enable the operation keyway process easier. In generally the
slotting/milling operation can be performed by slotting machine but in this case the
keyway operation can be done using conventional lathe through keyway attachment
Our project have the following objectives
1.
To reduce the lead time.
2.
To increase the productivity by using keyway attachment which is attached in the
lathe?
3.
Even an unskilled technician can use them
4.
No need for purchasing special machine for keyway ie. Slotting/milling
With these features, we sincerely hope that our project serve as a valuable project. We
welcome the correction, comments based on our project.
2. DIAGRAM OF KEYWAY ATTACHMENT
Advantage
1) Fixture cost is low
2) No need of purchase special machine for this
3) Production cost is low
Disadvantage
1) Accuracy is little bit low