2. Submitted To Submitted By
Dr. Manoj Goyal Harpreet Singh GME/133601
Amritpal Singh GME/113716
Kulwinder Singh Lotte GME/113720
SLIET, Longowal
2
3. About HMT
o HMT was First Incorporated by the Government of India in 1953 as the first
machine tool manufacture in the country to supply machine tools for the
Indian Manufacture Industries.
o The second unit was set up in the Bangalore in 1959 making use of
company’s own.
o The third unit was set up in 1963 at Pinjore to produce Milling machine.
SLIET, Longowal
3
6. Pattern Shop
Pattern is the first object needed
for a casting. The Pattern shop is
concerned with the construction
of casting.
The commonly used materials in
the pattern shop are following :
1.Metal (Aluminium, Cast Iron,
Bronze etc)
2.Wood
3.Thermocol.
SLIET, Longowal
6
7. Foundry Shop
There is well-equipped and
modernized foundry running in HMT.
There are 3 electric furnaces
working in the foundry. All the
requirements of tractor division and
machine tool division are fulfilled by
this foundry. Casting is the final
product of the foundry. Liquid metal
is poured into mould and the
molten metal takes the shape of
the cavity.
SLIET, Longowal
7
8. Heat Treatment
Heat treatment is an operation of heating and
cooling of metals in the solid state of induce
certain desired properties into them and improve
their properties mainly to change their internal
properties.
SLIET, Longowal
8
9. Classification of Heat Treatment
SLIET, Longowal
9
Hardening Tempering Carburising
Annealing
Case
Hardening
Shot
Blasting
11. Machine Shop
Light Machine Shop
As the name shows, all the light parts
of tractors such as differential
housing, power take off shafts,
splined shafts, gears, rear wheel
driving hubs, portal shafts, main
transmission shafts etc. are machined
here.
Heavy Machine Shop
In this section, all the heavy parts of
the tractor are machined. Gearbox
housing, main transmission housing,
front cover, hydraulic lift, etc. are
machined here.
SLIET, Longowal
11
13. Crank Case
It is made of cast iron.
Other parts of the
engine are directly or
indirectly attached to
it.
It is equipped with
holes, by which the
engine may be firmly
anchored to its
foundation.
SLIET, Longowal
13
14. Cylinder
A cylinder is the central working part of
a reciprocating engine.
Cylinders are made of high-grade grey cast
iron.
It act as combustion chamber for the engine.
SLIET, Longowal
14
15. Piston & Connecting Rod
Piston of an engine
move back and forth in
the cylinder owing to the
explosion of the fuel
mixture.
Piston is surrounded by
piston rings which
prevent the friction
losses.
Connecting rod
connects the piston and
crank shaft
SLIET, Longowal
15
17. Engine Testing
After assembly, engine is brought to engine testing section.
In this section practical checking of engine is done on engine and water
supply is connected to it, then the engine is started with the external DC
supply.
After this, the proper operating of valves is done, the engine is kept running
for two hrs.
During running the load is also varied and various properties like lubricating
oil pressure, load capacity, fuel consumption etc is checked.
SLIET, Longowal
17