1. How to Weld Aluminum
How to weld is a question asked by many just getting started. There are many books
on how to weld, too many in fact to mention. But, what the books don't tell those
wanting to learn how to weld are the specific products needed for the task.
How to weld is a question asked by many just getting started. There are many
books on how to weld, too many in fact to mention. But, what the books don't tell
those wanting to learn how to weld are the specific products needed for the task.
Welding is a method of joining two or more materials with electrically generated
heat, fuel gas generated heat, friction, pressure, explosives or even sound. While

2. there are many different welding processes listed by the American Welding Society,
the one we are going to cover here is How to weld Aluminum.
Within just a few short minutes we will show you How to Weld Aluminum.
Aluminum is a great metal, and the following is a very easy to use system that will
allow you to weld, without any experience at all! Aluminumrepair.com answers the
question How to Weld Aluminum Aluminumrepair.com is a revolutionary, easy to
use, aluminum welding solution.
All you need in order to get started in learning how to weld is a heat source such as
propane, butane, map, or an oxy-acetylene torch and our high-
strength brazing rods.
There's no need to spend hours learning how to MIG and TIG weld when you can do
everything you need to do with the flexibility of gas welding using our HTS-2000
and HTS-528 industrial-strength, second-generation brazing rods. If you want to
learn how to weld fuel tanks, diesel engines, automobiles, trucks, tractors, airplanes,
motorcycles, aluminum boats, wheels, awnings, gutters, ladders, rivets and
aluminum brackets, then all you need is our line of hi-tech brazing products, a heat
source and a will to learn.

3. Just ask the professional welders, maintenance repairmen, fabricators and machine
shop owners across the nation who have switched from other types of welding
platforms to using our system. If you're just learning how to weld, why start off on
the wrong foot only to switch to our system at a later date? Why not start off
learning how to weld right the first time around?
If you're like many who are new to welding, you just want to get two pieces of metal
to stick together without cracking, warping, shriveling, or breaking. For aluminum,
we recommend the HTS-2000 brazing rod as it has more tensile strength and
elongation than any other product on the market. Repairs are actually stronger than
the base metal, no special brushes are needed and the brazing rod material
penetrates past impurities like antifreeze, oil, and corrosion.
For those learning how to weld cast iron, we recommend the HTS-528 brazing rod
as the flux is built right into the rod, meaning melting the base metal is not
necessary. The 528 is the perfect rod to use for high-heat applications up to 1400
degrees such as cast iron manifolds or repairing cracks in blocks.

4. For more information on how to weld, visit our video: http://bit.ly/W75pEl and
see the many uses for our high-strength brazing material or mail us
info@aluminumrepair.com.