1. Various plastic
Pipes

2. Flange Joint

3. Integral
Joints (solder inside) & PTFE tape

4. Flux

5. Solder and Malleable Fittings

6. Low Carbon Steel (LCS) Pipe with screw
thread Heavy gauge

7. Copper pipe 22mm and 15mm

8. Blow Torch

9. Compression Fittings

10. An Introduction to Common Plumbing Fittings
End Feed Fittings (E/F) (Capillary Action)
End feed fittings, are fittings where the solder is manually fed in from the end of
the fitting during soldering.
All pipes used must be cleaned and have flux applied to each joint before heating
with a blow torch and the application of solder
15mm End Feed Coupler 15mm End Feed Tee

11. Service (ball) Valve