The document provides service and maintenance instructions for a Bobcat telescopic handler. It outlines safety precautions that must be followed when operating or servicing the machine. Key points include:
- Safe operation is the operator's responsibility. Only qualified operators should use the machine.
- Avoid silica dust and properly dismantle and dispose of parts.
- Take fire prevention measures during maintenance, operation, electrical work, fueling, starting, welding and grinding.
- Inspect the machine thoroughly after any repairs, checking components like ROPS, seat belts, lights, fluids and leaks.
This document provides safety precautions and guidelines for maintenance of an excavator. It outlines general safety rules including wearing proper protective equipment, preparing the work area, stopping the engine before maintenance, and securing components. It also provides cautions for specific tasks like fueling, tilting the platform, and working with pressurized hydraulic components. Maintaining control of tools and blocking movable parts are emphasized to prevent injury.
Takeuchi tb175 w hydraulic excavator service repair workshop manual (serial n...jfdjjskekksemm
This document provides safety precautions and guidelines for maintenance of the machine. It outlines proper personal protective equipment to wear like hard hats and safety glasses. It instructs technicians to stop the engine before performing maintenance, securely block parts that could fall, and stay clear of moving parts. The document emphasizes following all safety rules and regulations to prevent injuries when working on the machine.
Daewoo doosan mega 160 wheel loader service repair manual sn 1021 and upjfdjjskekksemm
- Daewoo reserves the right to improve its products at any time without obligation to update previously sold machines. Consumers should periodically check with distributors for documentation on purchased equipment.
- Safety labels and illustrations in manuals may vary between machines but are intended to represent the actual equipment.
- Proper use and maintenance of safety procedures are essential for safe operation of the wheel loader. Unauthorized modifications can create safety hazards.
Daewoo doosan solar 225 nlc v excavator service repair manualjfdjjskekksemm
This shop manual provides specifications, maintenance procedures, and repair information for a Daewoo Solar 225NLC-V track excavator. It includes sections on safety, specifications, general maintenance, the upper structure, lower structure and chassis, engine and drive train, hydraulics, electrical systems, and attachments. Safety precautions are emphasized throughout, including proper mounting and dismounting of the machine, fire hazards related to fuels and fluids, and safe lifting procedures when using the excavator's lifting capabilities.
Claas axion 900 (type a23) tractor service repair manual (serial number a2300...jfdjjskekksemm
This repair manual provides instructions for maintaining an EQ 200 gearbox on a CLAAS tractor. It details procedures for repairs like replacing the sump and centrifuge oil vapour filter. Technical specifications are provided, like torque values for fasteners and lubricants to use. Special tools needed for some repairs are also listed. The manual aims to help technicians perform repairs correctly while ensuring safety.
Doosan dl300 5 wheel loader service repair manualjfdjjskekksemm
This document provides safety instructions and overview information for servicing an engine. It contains sections on safety, engine overview, identification, specifications, mounting procedures, tightening torques for various engine components, and exhaust system details. The document provides detailed instructions, component descriptions, diagrams and specifications to guide maintenance and repair of the engine.
This manual provides instructions for maintenance procedures such as disassembly and reassembly of machines. It explains safety precautions, machine configurations, hydraulic systems, troubleshooting, and engines. The manual is intended to improve maintenance techniques and items are subject to change without notice. Front and rear, left and right orientations are defined from the operator's perspective. The machine serial number is used for ordering parts and inquiries. Record of manual distribution is kept and the person in charge will be notified of any updates.
This document provides safety precautions and guidelines for maintenance of an excavator. It outlines general safety rules including wearing proper protective equipment, preparing the work area, stopping the engine before maintenance, and securing components. It also provides cautions for specific tasks like fueling, tilting the platform, and working with pressurized hydraulic components. Maintaining control of tools and blocking movable parts are emphasized to prevent injury.
Takeuchi tb175 w hydraulic excavator service repair workshop manual (serial n...jfdjjskekksemm
This document provides safety precautions and guidelines for maintenance of the machine. It outlines proper personal protective equipment to wear like hard hats and safety glasses. It instructs technicians to stop the engine before performing maintenance, securely block parts that could fall, and stay clear of moving parts. The document emphasizes following all safety rules and regulations to prevent injuries when working on the machine.
Daewoo doosan mega 160 wheel loader service repair manual sn 1021 and upjfdjjskekksemm
- Daewoo reserves the right to improve its products at any time without obligation to update previously sold machines. Consumers should periodically check with distributors for documentation on purchased equipment.
- Safety labels and illustrations in manuals may vary between machines but are intended to represent the actual equipment.
- Proper use and maintenance of safety procedures are essential for safe operation of the wheel loader. Unauthorized modifications can create safety hazards.
Daewoo doosan solar 225 nlc v excavator service repair manualjfdjjskekksemm
This shop manual provides specifications, maintenance procedures, and repair information for a Daewoo Solar 225NLC-V track excavator. It includes sections on safety, specifications, general maintenance, the upper structure, lower structure and chassis, engine and drive train, hydraulics, electrical systems, and attachments. Safety precautions are emphasized throughout, including proper mounting and dismounting of the machine, fire hazards related to fuels and fluids, and safe lifting procedures when using the excavator's lifting capabilities.
Claas axion 900 (type a23) tractor service repair manual (serial number a2300...jfdjjskekksemm
This repair manual provides instructions for maintaining an EQ 200 gearbox on a CLAAS tractor. It details procedures for repairs like replacing the sump and centrifuge oil vapour filter. Technical specifications are provided, like torque values for fasteners and lubricants to use. Special tools needed for some repairs are also listed. The manual aims to help technicians perform repairs correctly while ensuring safety.
Doosan dl300 5 wheel loader service repair manualjfdjjskekksemm
This document provides safety instructions and overview information for servicing an engine. It contains sections on safety, engine overview, identification, specifications, mounting procedures, tightening torques for various engine components, and exhaust system details. The document provides detailed instructions, component descriptions, diagrams and specifications to guide maintenance and repair of the engine.
This manual provides instructions for maintenance procedures such as disassembly and reassembly of machines. It explains safety precautions, machine configurations, hydraulic systems, troubleshooting, and engines. The manual is intended to improve maintenance techniques and items are subject to change without notice. Front and rear, left and right orientations are defined from the operator's perspective. The machine serial number is used for ordering parts and inquiries. Record of manual distribution is kept and the person in charge will be notified of any updates.
This manual provides instructions for maintenance procedures of a machine, including disassembly, reassembly, inspections, specifications, and troubleshooting. It emphasizes several important safety precautions for technicians performing maintenance, such as wearing protective equipment, blocking the machine securely, and avoiding moving parts. The document defines terms like front/rear and left/right in relation to the machine's orientation and components.
Takeuchi tb175 hydraulic excavator operator manual serial no. 17512105 and updfujskeksmefm
- The document is an operator's manual for a hydraulic excavator that provides safety instructions and warnings to avoid injury or death during operation.
- It emphasizes the importance of fully understanding the machine's controls and functions before operating, and following all safety rules, regulations and precautions.
- Operators must wear appropriate protective equipment like a hard hat, safety shoes, glasses and gloves and be unimpaired when working with the excavator.
Doosan dl550 wheel loader service repair manualfujsjefjskekmme
The document provides safety instructions for wheel loaders. It discusses general safety practices including wearing personal protective equipment, avoiding hot or pressurized fluids, preventing flying or falling objects, and ensuring proper maintenance of the machine. It also covers safety during transportation, operation, and maintenance of the wheel loader.
Doosan dl400 wheel loader service repair manualjfdjjskfkksmemm
The document provides safety information for operating a Doosan wheel loader, including:
1) It outlines general safety essentials, such as following all safety recommendations and using tools and equipment in good working order.
2) It specifies the location of safety labels on the machine and prohibits unauthorized modifications.
3) It describes general hazard information and safety precautions that should be followed before starting the engine, during machine operation, maintenance, and other activities like working with the battery, towing, and shipping. Failure to follow the safety guidelines could result in serious injury or death.
Daewoo doosan solar 330 lc v excavator service repair manualjfdjjskfkksmemm
Daewoo provides safety guidelines for operating excavators. Key points include:
1. Excavators are primarily designed for earthmoving, not lifting, which requires approved configurations.
2. Lifting capacity ratings assume level ground and loads supported evenly without side loads.
3. Operators should follow all safety instructions and check local regulations regarding heavy lifting.
4. Work crews must coordinate signals and procedures to ensure safe lifting.
The full safety document covers general safety, worksite precautions, operating procedures, equipment maintenance, transportation, and lifting capacity ratings. Operators and crews should thoroughly review all guidelines to prevent injury or damage.
Takeuchi tb230 mini excavator operator manual (serial no. 130000003 and up)fujsjefjskekmme
This document provides safety instructions for operating an excavator. It states that only trained operators should use the machine and that all safety rules, regulations and procedures must be followed. It lists general safety precautions like understanding how to prevent hazards before they occur. The document emphasizes the operator's responsibility to observe all laws and regulations and the manufacturer's instructions regarding machine operation, inspection and maintenance.
Daewoo doosan solar 400 lc v excavator operation and maintenance manualfujsjefjskekmme
1. Daewoo reserves the right to improve its products and implement improvements at any time without obligation to update previously sold machines.
2. It is recommended that consumers periodically check for recent documentation from their distributor on purchased equipment, as it may include optional attachments not originally included.
3. Illustrations in the manual are representations and may vary from the actual machine.
This document provides an operator's manual for a compact excavator. It begins with warnings about properly understanding the instructions to avoid injury or death. It emphasizes that all operators must be fully trained on the machine's functions and controls before operation. The manual contains sections on safety precautions for preparation, starting, operation, stopping, transport and maintenance. It describes general safety signs and responsibilities of the operator.
Takeuchi tb175 w hydraulic excavator operator manual serial no. 17520209 and updfujskeksmefm
This document provides an operator's manual for a hydraulic excavator. It begins with warnings about reading the instructions to prevent injury or death. It explains that the owner is responsible for fully instructing operators on safe operation. It provides guidance on proper operation, inspection, and maintenance and cautions that improper practices can cause injury or death. It defines signal words used and various symbols.
Takeuchi tb1140 hydraulic excavator parts catalogue manual (serial no. 514400...ujjjjfkksekmmdm
The document is an exploded diagram parts list for a TB1140 excavator. It contains multiple pages detailing the individual parts that make up assemblies for the lower frame, steps, shoe guides, steel crawler belts, rubber crawler belts, segment rubber crawler belts, carrier rollers, track rollers, optional track guards, and front idlers of the excavator. Each part lists the part number, description, quantity, and other identifying information.
Takeuchi tb240 mini excavator parts catalogue manual (serial no. 124000003 an...ujjjjfkksekmmdm
The document provides parts information for a TB240 excavator. It includes lists of parts for various assemblies of the excavator with part numbers, descriptions, quantities and other details. The assemblies covered include the lower frame, crawler belt, carrier roller, track roller, front idler, track adjuster, travel device, slew bearing and swivel joint & accessories.
Takeuchi tb219 mini excavator parts catalogue manual (serial no. 121900003 an...ujjjjfkksekmmdm
The document is an exploded diagram and parts list for a TB219 excavator. It includes diagrams and lists of parts for the lower frame, shoe slide, crawler belt, track roller, front idler, track adjuster, travel device, slew bearing, and swivel joint & accessories of the excavator. Each component drawing shows the part numbers, descriptions, quantities, and other information for the individual parts that make up that component.
Takeuchi tb180 fr parts catalogue manual (serial no. 17840001 and up)ujjjjfkksekmmdm
The document provides parts information for a Takeuchi TB180FR excavator. It includes diagrams and lists of parts for the lower frame, crawler belt, carrier roller, track roller, front idler, track adjuster, travel device, and slew bearing. The parts are identified by number, description, quantity, and other specifications.
This document provides safety precautions and guidelines for maintenance of an excavator. It outlines general safety rules including wearing proper protective equipment, preparing the work area, stopping the engine before maintenance, and securing components. It also provides cautions for specific tasks like fueling, tilting the platform, and working with pressurized hydraulic components. Maintaining safety is essential when performing excavator maintenance.
This document provides an introduction and safety precautions for maintaining a machine. It begins by stating that the manual explains procedures for disassembling and reassembling the machine, as well as maintenance and troubleshooting information. Several safety precautions are then listed, including wearing protective equipment, blocking parts that could fall, fueling safely, and avoiding hot or moving components. Maintainers are instructed to clean the machine, stop the engine before working, and secure any opened panels.
Takeuchi tb175 w hydraulic excavator service repair workshop manual (serial n...ujjjjfkksekmmdm
This document provides a workshop manual for a TB175W hydraulic excavator. It contains safety precautions and cautions for disassembly, assembly, removal and installation of parts. Sections include general information, specifications, machine configuration, hydraulic units, and troubleshooting. Maintenance personnel should follow the safety guidelines and use this manual as a reference for service activities.
Takeuchi tb175 w hydraulic excavator service repair workshop manual (serial n...ujjjjfkksekmmdm
This document provides safety precautions and guidelines for maintenance of the machine. It outlines proper personal protective equipment to wear, such as hard hats and safety glasses. It instructs technicians to stop the engine and attach a "Do Not Operate" tag before performing any maintenance. Technicians should also clean the machine, secure any raised or moving components, and be aware of rotating or moving parts to avoid injury. The document emphasizes following all safety rules and regulations when working on the machine.
Takeuchi tb175 w hydraulic excavator parts catalogue manual (serial no. 17540...ujjjjfkksekmmdm
This document contains parts lists and diagrams for the front and rear axles of a TB175W tractor. It includes 6 pages detailing over 70 individual parts for the front axle assembly, their part numbers, quantities, and references to additional documents. A further 7 pages provide the same level of detail for components of the rear axle assembly.
Takeuchi tb175 w hydraulic excavator parts catalogue manual (serial no. 17520...ujjjjfkksekmmdm
This document contains parts lists and diagrams for the piping and components of the lower hydraulic system for a TB175W excavator. It includes items such as hoses, unions, valves, fittings and seals. The parts are organized into sections for the dozer blade, rotating shaft, and multiple pages of piping diagrams referencing the lower hydraulic system. Serial numbers are provided for the excavator and some components.
Takeuchi tb175 w hydraulic excavator operator manual serial no. 175400095 and upujjjjfkksekmmdm
This document provides an operator's manual for a hydraulic excavator. It begins with several warnings about reading the instructions to avoid injury or death. It then provides information about operating safely, including using proper protective equipment, following signals, and keeping safety equipment in place. The document instructs operating within temperature ranges and stopping if any problems are found. It also includes sections about controls, operation, transport, maintenance, troubleshooting and specifications.
Takeuchi tb175 w hydraulic excavator operator manual serial no. 17520209 and upujjjjfkksekmmdm
This document provides an operator's manual for a hydraulic excavator. It begins with several warnings about reading the instructions to avoid injury or death. It then provides guidance on safe operation, including using proper protective equipment, following signals from signal persons, keeping safety equipment in place, and avoiding fire hazards. It also describes daily inspection and maintenance requirements and emergency exit procedures.
Takeuchi tb175 hydraulic excavator operator manual serial no. 175301106 and upujjjjfkksekmmdm
1. The document provides safety instructions for operating a hydraulic excavator, including preparing for operation, starting the machine, operating safely, stopping safely, transporting, and maintenance.
2. Wear appropriate protective equipment, know the work area, perform inspections, and clear the area of people before starting.
3. Maintain three points of contact when mounting and dismounting, start the machine only when it is safe to do so, and follow all procedures carefully.
This manual provides instructions for maintenance procedures of a machine, including disassembly, reassembly, inspections, specifications, and troubleshooting. It emphasizes several important safety precautions for technicians performing maintenance, such as wearing protective equipment, blocking the machine securely, and avoiding moving parts. The document defines terms like front/rear and left/right in relation to the machine's orientation and components.
Takeuchi tb175 hydraulic excavator operator manual serial no. 17512105 and updfujskeksmefm
- The document is an operator's manual for a hydraulic excavator that provides safety instructions and warnings to avoid injury or death during operation.
- It emphasizes the importance of fully understanding the machine's controls and functions before operating, and following all safety rules, regulations and precautions.
- Operators must wear appropriate protective equipment like a hard hat, safety shoes, glasses and gloves and be unimpaired when working with the excavator.
Doosan dl550 wheel loader service repair manualfujsjefjskekmme
The document provides safety instructions for wheel loaders. It discusses general safety practices including wearing personal protective equipment, avoiding hot or pressurized fluids, preventing flying or falling objects, and ensuring proper maintenance of the machine. It also covers safety during transportation, operation, and maintenance of the wheel loader.
Doosan dl400 wheel loader service repair manualjfdjjskfkksmemm
The document provides safety information for operating a Doosan wheel loader, including:
1) It outlines general safety essentials, such as following all safety recommendations and using tools and equipment in good working order.
2) It specifies the location of safety labels on the machine and prohibits unauthorized modifications.
3) It describes general hazard information and safety precautions that should be followed before starting the engine, during machine operation, maintenance, and other activities like working with the battery, towing, and shipping. Failure to follow the safety guidelines could result in serious injury or death.
Daewoo doosan solar 330 lc v excavator service repair manualjfdjjskfkksmemm
Daewoo provides safety guidelines for operating excavators. Key points include:
1. Excavators are primarily designed for earthmoving, not lifting, which requires approved configurations.
2. Lifting capacity ratings assume level ground and loads supported evenly without side loads.
3. Operators should follow all safety instructions and check local regulations regarding heavy lifting.
4. Work crews must coordinate signals and procedures to ensure safe lifting.
The full safety document covers general safety, worksite precautions, operating procedures, equipment maintenance, transportation, and lifting capacity ratings. Operators and crews should thoroughly review all guidelines to prevent injury or damage.
Takeuchi tb230 mini excavator operator manual (serial no. 130000003 and up)fujsjefjskekmme
This document provides safety instructions for operating an excavator. It states that only trained operators should use the machine and that all safety rules, regulations and procedures must be followed. It lists general safety precautions like understanding how to prevent hazards before they occur. The document emphasizes the operator's responsibility to observe all laws and regulations and the manufacturer's instructions regarding machine operation, inspection and maintenance.
Daewoo doosan solar 400 lc v excavator operation and maintenance manualfujsjefjskekmme
1. Daewoo reserves the right to improve its products and implement improvements at any time without obligation to update previously sold machines.
2. It is recommended that consumers periodically check for recent documentation from their distributor on purchased equipment, as it may include optional attachments not originally included.
3. Illustrations in the manual are representations and may vary from the actual machine.
This document provides an operator's manual for a compact excavator. It begins with warnings about properly understanding the instructions to avoid injury or death. It emphasizes that all operators must be fully trained on the machine's functions and controls before operation. The manual contains sections on safety precautions for preparation, starting, operation, stopping, transport and maintenance. It describes general safety signs and responsibilities of the operator.
Takeuchi tb175 w hydraulic excavator operator manual serial no. 17520209 and updfujskeksmefm
This document provides an operator's manual for a hydraulic excavator. It begins with warnings about reading the instructions to prevent injury or death. It explains that the owner is responsible for fully instructing operators on safe operation. It provides guidance on proper operation, inspection, and maintenance and cautions that improper practices can cause injury or death. It defines signal words used and various symbols.
Takeuchi tb1140 hydraulic excavator parts catalogue manual (serial no. 514400...ujjjjfkksekmmdm
The document is an exploded diagram parts list for a TB1140 excavator. It contains multiple pages detailing the individual parts that make up assemblies for the lower frame, steps, shoe guides, steel crawler belts, rubber crawler belts, segment rubber crawler belts, carrier rollers, track rollers, optional track guards, and front idlers of the excavator. Each part lists the part number, description, quantity, and other identifying information.
Takeuchi tb240 mini excavator parts catalogue manual (serial no. 124000003 an...ujjjjfkksekmmdm
The document provides parts information for a TB240 excavator. It includes lists of parts for various assemblies of the excavator with part numbers, descriptions, quantities and other details. The assemblies covered include the lower frame, crawler belt, carrier roller, track roller, front idler, track adjuster, travel device, slew bearing and swivel joint & accessories.
Takeuchi tb219 mini excavator parts catalogue manual (serial no. 121900003 an...ujjjjfkksekmmdm
The document is an exploded diagram and parts list for a TB219 excavator. It includes diagrams and lists of parts for the lower frame, shoe slide, crawler belt, track roller, front idler, track adjuster, travel device, slew bearing, and swivel joint & accessories of the excavator. Each component drawing shows the part numbers, descriptions, quantities, and other information for the individual parts that make up that component.
Takeuchi tb180 fr parts catalogue manual (serial no. 17840001 and up)ujjjjfkksekmmdm
The document provides parts information for a Takeuchi TB180FR excavator. It includes diagrams and lists of parts for the lower frame, crawler belt, carrier roller, track roller, front idler, track adjuster, travel device, and slew bearing. The parts are identified by number, description, quantity, and other specifications.
This document provides safety precautions and guidelines for maintenance of an excavator. It outlines general safety rules including wearing proper protective equipment, preparing the work area, stopping the engine before maintenance, and securing components. It also provides cautions for specific tasks like fueling, tilting the platform, and working with pressurized hydraulic components. Maintaining safety is essential when performing excavator maintenance.
This document provides an introduction and safety precautions for maintaining a machine. It begins by stating that the manual explains procedures for disassembling and reassembling the machine, as well as maintenance and troubleshooting information. Several safety precautions are then listed, including wearing protective equipment, blocking parts that could fall, fueling safely, and avoiding hot or moving components. Maintainers are instructed to clean the machine, stop the engine before working, and secure any opened panels.
Takeuchi tb175 w hydraulic excavator service repair workshop manual (serial n...ujjjjfkksekmmdm
This document provides a workshop manual for a TB175W hydraulic excavator. It contains safety precautions and cautions for disassembly, assembly, removal and installation of parts. Sections include general information, specifications, machine configuration, hydraulic units, and troubleshooting. Maintenance personnel should follow the safety guidelines and use this manual as a reference for service activities.
Takeuchi tb175 w hydraulic excavator service repair workshop manual (serial n...ujjjjfkksekmmdm
This document provides safety precautions and guidelines for maintenance of the machine. It outlines proper personal protective equipment to wear, such as hard hats and safety glasses. It instructs technicians to stop the engine and attach a "Do Not Operate" tag before performing any maintenance. Technicians should also clean the machine, secure any raised or moving components, and be aware of rotating or moving parts to avoid injury. The document emphasizes following all safety rules and regulations when working on the machine.
Takeuchi tb175 w hydraulic excavator parts catalogue manual (serial no. 17540...ujjjjfkksekmmdm
This document contains parts lists and diagrams for the front and rear axles of a TB175W tractor. It includes 6 pages detailing over 70 individual parts for the front axle assembly, their part numbers, quantities, and references to additional documents. A further 7 pages provide the same level of detail for components of the rear axle assembly.
Takeuchi tb175 w hydraulic excavator parts catalogue manual (serial no. 17520...ujjjjfkksekmmdm
This document contains parts lists and diagrams for the piping and components of the lower hydraulic system for a TB175W excavator. It includes items such as hoses, unions, valves, fittings and seals. The parts are organized into sections for the dozer blade, rotating shaft, and multiple pages of piping diagrams referencing the lower hydraulic system. Serial numbers are provided for the excavator and some components.
Takeuchi tb175 w hydraulic excavator operator manual serial no. 175400095 and upujjjjfkksekmmdm
This document provides an operator's manual for a hydraulic excavator. It begins with several warnings about reading the instructions to avoid injury or death. It then provides information about operating safely, including using proper protective equipment, following signals, and keeping safety equipment in place. The document instructs operating within temperature ranges and stopping if any problems are found. It also includes sections about controls, operation, transport, maintenance, troubleshooting and specifications.
Takeuchi tb175 w hydraulic excavator operator manual serial no. 17520209 and upujjjjfkksekmmdm
This document provides an operator's manual for a hydraulic excavator. It begins with several warnings about reading the instructions to avoid injury or death. It then provides guidance on safe operation, including using proper protective equipment, following signals from signal persons, keeping safety equipment in place, and avoiding fire hazards. It also describes daily inspection and maintenance requirements and emergency exit procedures.
Takeuchi tb175 hydraulic excavator operator manual serial no. 175301106 and upujjjjfkksekmmdm
1. The document provides safety instructions for operating a hydraulic excavator, including preparing for operation, starting the machine, operating safely, stopping safely, transporting, and maintenance.
2. Wear appropriate protective equipment, know the work area, perform inspections, and clear the area of people before starting.
3. Maintain three points of contact when mounting and dismounting, start the machine only when it is safe to do so, and follow all procedures carefully.
Takeuchi tb175 hydraulic excavator operator manual serial no. 17530314 and upujjjjfkksekmmdm
1. The document provides safety instructions for the proper operation of a hydraulic excavator.
2. It emphasizes the importance of reading and understanding all safety messages to prevent accidents and injuries.
3. Operators must be trained and qualified, wear appropriate protective equipment, and not operate under the influence of substances.
Takeuchi tb175 hydraulic excavator operator manual serial no. 17512105 and upujjjjfkksekmmdm
1. The document provides safety instructions for operating a hydraulic excavator, including preparing for operation, starting the machine, operating safely, stopping safely, transporting, and maintenance.
2. Wear appropriate protective equipment, know the work area, perform inspections, and clear the area of people before starting.
3. Maintain three points of contact when mounting and dismounting, start the machine only when it is safe to do so, and follow all procedures carefully.
This document is a parts manual that provides part numbers, descriptions, quantities, and other information for components of a Takeuchi TB138FR excavator. It includes sections on the lower frame, crawler belt, track roller, front idler, track adjuster, travel device, and slew bearing. The manual contains diagrams and part lists for each component. Serial numbers 138200001 through 138200366 apply to some parts, while others apply to the range 138200367 and above.
Takeuchi tb128 fr mini excavator parts catalogue manual (serial no. 12830003 ...ujjjjfkksekmmdm
This document appears to be an excerpt from a technical manual or parts catalog for a TB128FR machine. It contains several sections with lists of parts, part numbers, quantities and other specifications for various components and assemblies of the machine, including the lower frame, crawler belts, carrier rollers, track rollers, front idler, track adjuster, travel device, slew bearing, and swivel joint & accessories. Each section includes an item list table with relevant information about the individual parts that make up each assembly.
Takeuchi tb23 r mini excavator parts catalogue manual (serial no.12300007 and...ujjjjfkksekmmdm
This document is a parts manual for a TB20R/23R machine. It contains 12 sections with diagrams and lists of parts including shoe slide assembly, crawler belt, track roller, front idler, track adjuster, travel device, slew bearing, swivel joint and accessories, and dozer blade. Each section contains the part numbers, descriptions, quantities, and other information for the component parts. Serial numbers are provided for some parts that vary between different machine serial number ranges.
Takeuchi tb20 r mini excavator parts catalogue manual (serial no.12300007 and...ujjjjfkksekmmdm
This document is a parts manual for a TB20R/23R machine. It contains 12 sections with part numbers, descriptions and quantities for components such as the shoe slide assembly, crawler belt, track roller, dozer blade and more. Each section includes reference information and serial number notes for the parts listed.
Doosan dl350 5 wheel loader service repair manualujjjjfkksekmmdm
The document is a shop manual that provides instructions for servicing and maintaining the DL300-5/DL350-5 wheel loader. It contains sections on safety, specifications, maintenance, the engine, drivetrain, brakes, hydraulics and other systems. The engine section provides an overview of the engine, specifications, identification details, maintenance instructions and tightening torques. It describes the engine type as a 4-cycle, water cooled, turbocharged diesel engine.
Top-Quality AC Service for Mini Cooper Optimal Cooling PerformanceMotor Haus
Ensure your Mini Cooper stays cool and comfortable with our top-quality AC service. Our expert technicians provide comprehensive maintenance, repairs, and performance optimization, guaranteeing reliable cooling and peak efficiency. Trust us for quick, professional service that keeps your Mini Cooper's air conditioning system in top condition, ensuring a pleasant driving experience year-round.
Charging Fueling & Infrastructure (CFI) Program by Kevin MillerForth
Kevin Miller, Senior Advisor, Business Models of the Joint Office of Energy and Transportation gave this presentation at the Forth and Electrification Coalition CFI Grant Program - Overview and Technical Assistance webinar on June 12, 2024.
Dahua provides a comprehensive guide on how to install their security camera systems. Learn about the different types of cameras and system components, as well as the installation process.
car rentals in nassau bahamas | atv rental nassau bahamasjustinwilson0857
At Dash Auto Sales & Car Rentals, we take pride in providing top-notch automotive services to residents and visitors alike in Nassau, Bahamas. Whether you're looking to purchase a vehicle, rent a car for your vacation, or embark on an exciting ATV adventure, we have you covered with our wide range of options and exceptional customer service.
Website: www.dashrentacarbah.com
Charging Fueling & Infrastructure (CFI) Program Resources by Cat PleinForth
Cat Plein, Development & Communications Director of Forth, gave this presentation at the Forth and Electrification Coalition CFI Grant Program - Overview and Technical Assistance webinar on June 12, 2024.
Charging and Fueling Infrastructure Grant: Round 2 by Brandt HertensteinForth
Brandt Hertenstein, Program Manager of the Electrification Coalition gave this presentation at the Forth and Electrification Coalition CFI Grant Program - Overview and Technical Assistance webinar on June 12, 2024.
2. MAINTENANCE SAFETY
Never service the Bobcat telescopic
handler without instructions.
MSW43-EN-0211
Have good ventilation when
welding or grinding painted
parts.
Wear dust mask when grinding
painted parts. Toxic dust and gas
can be produced.
Avoid exhaust fume leaks which
can kill without warning. Exhaust
system must be tightly sealed.
Cleaning and maintenance are
required daily.
CORRECT
P-90216
Lead-acid batteries produce
flammable and explosive gases.
Keep arcs, sparks, flames and
lighted tobacco away from
batteries.
Batteries contain acid which
burns eyes or skin on contact.
Wear protective clothing. If acid
contacts body, flush well with
water. For eye contact flush well
and get immediate medical
attention.
Safety Alert Symbol: This symbol with a warning statement,
means: “Warning, be alert! Your safety
is involved!” Carefully read the
message that follows.
Disconnecting or loosening any
hydraulic tubeline, hose, fitting,
component or a part failure can
cause boom to drop. Do not go
under boom when raised unless
supported by an approved boom
stop. Replace if damaged.
Keep body, jewelry and clothing
away from moving parts,
electrical contact, hot parts and
exhaust.
Wear eye protection to guard
from battery acid, compressed
springs, fluids under pressure
and flying debris when engines
are running or tools are used.
Use eye protection approved for
type of welding.
Never work on telescopic
handler with boom up unless
boom is held by an approved
boom stop. Replace if damaged.
Never modify equipment or add
attachments not approved by
Bobcat Company.
CORRECT
NA5428
WRONG
NA5432
WRONG
NA5433
WRONG
NA5434
WRONG
NA5436
WRONG
B-6589
Maintenance procedures which are given in the Operation & Maintenance Manual can be performed by the owner/operator
without any specific technical training. Maintenance procedures which are not in the Operation & Maintenance Manual must be
performed ONLY BY QUALIFIED BOBCAT SERVICE PERSONNEL. Always use genuine Bobcat replacement parts.
WARNING
Instructions are necessary before operating or servicing machine. Read and
understand the Operation & Maintenance Manual, Operator’s Handbook and
signs (decals) on machine. Follow warnings and instructions in the manuals
when making repairs, adjustments or servicing. Check for correct function after
adjustments, repairs or service. Untrained operators and failure to follow
instructions can cause injury or death. W-2003-0807
3 of 767
Dealer
Copy
--
Not
for
Resale
5. T35105 / T35105L / T36120SL
1-7 Service Manual
FOREWORD
This manual is for the Bobcat telescopic handler mechanic. It provides necessary servicing and adjustment
procedures for the Bobcat telescopic handler and its component parts and systems. Refer to the Operation &
Maintenance Manual for operating instructions, starting procedure, daily checks, etc.
A general inspection of the following items must be made after the telescopic handler has had service or repair:
FW TLS EMEA-0411 SM
1. Check that ROPS/FOPS
(Including right side window)
is in good condition and is not
modified.
9. Enclosure door latches must
open and close freely.
2. Check that ROPS mounting
hardware is tightened and is
Bobcat approved.
10. Attachment locking pins must
function correctly and be in
good condition.
3. The seat belt must be
correctly installed, functional
and in good condition.
11. Safety treads must be in good
condition.
4. Check boom support device,
replace if damaged.
12. Check for correct function of
indicator lamps and gauges.
5. Machine signs must be
legible and in the correct
location.
13. Check hydraulic fluid level,
engine oil level and fuel
supply.
6. Check tires for wear and
pressure. Use only approved
tires.
14. Inspect for fuel, oil or
hydraulic fluid leaks.
7. Check for correct function of
the work lights.
15. Lubricate the telescopic
handler.
8. The parking brake must
function correctly.
16. Check the condition of the
battery and cables.
9 of 767
Dealer
Copy
--
Not
for
Resale
6. T35105 / T35105L / T36120SL
1-8 Service Manual
FW TLS EMEA-0411 SM
17. Inspect the air cleaner for
damage or leaks. Check the
condition of the element.
20. Operate the telescopic
handler and check all
functions.
18. Check the electrical charging
system.
21. Check for any field
modification not completed.
19. Inspect for loose or broken
parts or connections.
22. Recommend to the owner
that all necessary corrections
be made before the machine
is returned to service.
10 of 767
Dealer
Copy
--
Not
for
Resale
7. T35105 / T35105L / T36120SL
1-9 Service Manual
SAFETY INSTRUCTIONS
Safe Operation Is The Operator’s Responsibility
WARNING
Operator must have instructions before operating the
machine. Untrained operators can cause injury or
death.
W-2001-0502
IMPORTANT
This notice identifies procedures which must be
followed to avoid damage to the machine.
I-2019-0284
DANGER
The signal word DANGER on the machine and in the
manuals indicates a hazardous situation which, if not
avoided, will result in death or serious injury.
D-1002-1107
WARNING
The signal word WARNING on the machine and in the
manuals indicates a potentially hazardous situation
which, if not avoided, could result in death or serious
injury.
W-2044-1107
The telescopic handler and attachment must be in good
operating condition before use.
Check all of the items on the Bobcat Service Schedule
Decal under the 8-10 hour column or as shown in the
Operation & Maintenance Manual.
Safe Operation Needs A Qualified Operator
For an operator to be qualified, he or she must not use
drugs or alcoholic drinks which impair alertness or co-
ordination while working. An operator who is taking
prescription drugs must get medical advice to determine
if he or she can safely operate a machine.
A Qualified Operator Must Do The Following:
Understand the Written Instructions, Rules and
Regulations
• The written instructions from Bobcat Company
include the Delivery Report, Operation &
Maintenance Manual, Operator’s Handbook and
machine signs (decals).
• Check the rules and regulations at your location. The
rules may include an employer’s work safety
requirements. For driving on public roads, the
machine must be equipped as stipulated by the local
regulations authorising operation on public roads in
your specific country. Regulations may identify a
hazard such as a utility line.
• For operating the machine, some countries require an
operator license. Check the regulations at your
location.
Have Training with Actual Operation
• Operator training must consist of a demonstration and
verbal instruction. This training is given by your
Bobcat dealer before the product is delivered.
• The new operator must start in an area without
bystanders or structures and use all the controls until
he or she can operate the machine and attachment
safely under all conditions of the work area. Always
fasten seat belt before operating.
Know the Work Conditions
• Know the weight of the materials being handled.
Avoid exceeding the Rated Load Capacity of the
machine (as indicated on the Load Capacity Charts).
Material which is very dense will be heavier than the
same volume of less dense material. Reduce the size
of load if handling dense material.
• The operator must know any prohibited uses or work
areas, for example, he or she needs to know about
excessive slopes.
• Know the location of any underground lines.
• Wear tight fitting clothing. Always wear safety glasses
when doing maintenance or service. Safety glasses,
respiratory equipment, hearing protection or Front
Window Guard are required for some work. See your
Bobcat dealer about Bobcat Safety Equipment.
SI TH EMEA-0913 SM
This symbol with a warning statement means:
“Warning, be alert! Your safety is involved!”
Carefully read the message that follows.
Safety Alert Symbol
11 of 767
Dealer
Copy
--
Not
for
Resale
8. T35105 / T35105L / T36120SL
1-10 Service Manual
SAFETY INSTRUCTIONS (CONT’D)
Safe Operation Needs A Qualified Operator (Cont’d)
Where overhead power lines are present in the operating
area, ensure sufficient clearance between the nearest of
these lines and any part of the machine.
The operator must survey his / her field of vision when
operating the telescopic handler. Adjust mirrors to obtain
the best visibility. Clean mirrors every day and more often
when necessary. Immediately replace any broken or
damaged mirrors. If a suspended load or the resulting
boom geometry blocks the vision of the operator
alternative carrying means must be considered.
The operator must know the wind speed. Do not use the
telescopic handler with wind speeds over 12,5 m/s.
Avoid Silica Dust
Cutting or drilling concrete containing sand or rock
containing quartz may result in exposure to silica dust.
Use a respirator, water spray or other means to control
dust.
Dismantling And Disposal
On the completion of its useful life, the machine and its
parts shall be disposed of in an environmental friendly
manner. Please contact your local dealer. Parts of the
machine can be remanufactured like the engine
depending on its age and condition, or recycled like
metals, plastics, rubbers and glasses. Respect the
environment and dispose of waste properly. Worn or
damaged parts shall not be left in the environment. Oils,
brake fluid, cooling refrigerants, batteries and cells shall
be disposed of in a proper manner through your local
dealer or recycling centre.
SI TH EMEA-0913 SM
VOLTAGE MINIMUM DISTANCE
up to 50 kV 3 m
beyond 50 kV 5 m
12 of 767
Dealer
Copy
--
Not
for
Resale
9. T35105 / T35105L / T36120SL
1-11 Service Manual
FIRE PREVENTION
Maintenance
The machine and some attachments have components
that are at high temperatures under normal operating
conditions. The primary source of high temperatures is
the engine and exhaust system. The electrical system, if
damaged or incorrectly maintained, can be a source of
arcs or sparks.
Flammable debris (leaves, straw, etc.) must be removed
regularly. If flammable debris is allowed to accumulate, it
can cause a fire hazard. Clean often to avoid this
accumulation. Flammable debris in the engine
compartment is a potential fire hazard.
The operator’s area, engine compartment and engine
cooling system must be inspected every day and cleaned
if necessary to prevent fire hazards and overheating.
All fuels, most lubricants and some coolants mixtures are
flammable. Flammable fluids that are leaking or spilled
onto hot surfaces or onto electrical components can
cause a fire.
Operation
Do not use the machine where exhaust, arcs, sparks or
hot components can contact flammable material,
explosive dust or gases.
Electrical
Check all electrical wiring and connections for damage.
Keep the battery terminals clean and tight. Repair or
replace any damaged part or wires that are loose or
frayed.
Battery gas can explode and cause serious injury. Use
the procedure in the Operation & Maintenance Manual
for connecting the battery and for jump starting. Do not
jump start or charge a frozen or damaged battery. Keep
any open flames or sparks away from batteries. Do not
smoke in battery charging area.
Hydraulic System
Check hydraulic tubes, hoses and fittings for damage
and leakage. Never use open flame or bare skin to check
for leaks. Hydraulic tubes and hoses must be properly
routed and have adequate support and secure clamps.
Tighten or replace any parts that show leakage.
Always clean fluid spills. Do not use petrol or diesel fuel
for cleaning parts. Use commercial non-flammable
solvents.
Fueling
Stop the engine and let it cool before adding fuel. No
smoking! Do not refuel a machine near open flames or
sparks. Fill the fuel tank outdoors.
Ultra Low Sulfur Diesel (ULSD) poses a greater static
ignition hazard than earlier diesel formulations with
higher Sulfur content. Avoid death or serious injury from
fire or explosion. Consult with your fuel or fuel system
supplier to ensure the delivery system is in compliance
with fueling standards for proper grounding and bonding
practices.
Starting
Do not use ether or starting fluids on any engine that has
glow plugs. These starting aids can cause explosion and
injure you or bystanders.
Use the procedure in the Operation & Maintenance
Manual for connecting the battery and for jump starting.
SI TH EMEA-0913 SM
13 of 767
Dealer
Copy
--
Not
for
Resale
10. T35105 / T35105L / T36120SL
1-12 Service Manual
FIRE PREVENTION (CONT’D)
Welding And Grinding
Always clean the machine and attachment, disconnect
the battery, and disconnect the wiring from the Bobcat
controllers before welding. Cover rubber hoses, battery
and all other flammable parts. Keep a fire extinguisher
near the machine when welding.
Have good ventilation when grinding or welding painted
parts. Wear dust mask when grinding painted parts.
Toxic dust or gas can be produced.
Dust generated from repairing non-metallic parts such as
hoods, fenders or covers can be flammable or explosive.
Repair such components in a well ventilated area away
from open flames or sparks.
Fire Extinguishers
Know where fire extinguishers and first aid kits are
located and how to use them. Inspect the fire
extinguisher and service the fire extinguisher regularly.
Obey the recommendations on the instructions plate.
Sl TH EMEA-0913 SM
14 of 767
Dealer
Copy
--
Not
for
Resale
11. T35105 / T35105L / T36120SL
1-13 Service Manual
SERIAL NUMBER LOCATION
Always use the serial number of the telescopic handler
when requesting service information or when ordering
parts.
If any serial number plate is damaged, contact your
Bobcat dealer.
Telescopic Handler Serial Number
Figure 1
The telescopic handler serial number plate is located on
the right side of the chassis in front [Figure 1].
Explanation of telescopic handler serial number:
Engine Serial Number
Figure 2
The engine serial number can be found on the engine
serial number plate [Figure 2] in front of you when
opening the engine cover. Always use the full number
when ordering replacement parts.
Other Serial Numbers
Other components can also have serial numbers and an
identification plate. Always use these serial numbers
when ordering parts.
P118580
P118097
XXXX XXXXX
Module 2. - Production
Sequence (Series)
Module 1. - Model / Engine
Combination
1. The four digit Model / Engine Combination Module
number identifies the model number and engine
combination.
2. The five digit Production Sequence Number identifies
the order which the telescopic handler is produced.
S38000
S38001
15 of 767
Dealer
Copy
--
Not
for
Resale
12. T35105 / T35105L / T36120SL
1-14 Service Manual
DELIVERY REPORT
Figure 3
The delivery report must be completed by the dealer and
signed by the owner or operator when the Bobcat
telescopic handler is delivered. An explanation of the
form must be given to the owner [Figure 3].
B-16315
16 of 767
Dealer
Copy
--
Not
for
Resale
13. T35105 / T35105L / T36120SL
1-15 Service Manual
BOBCAT TELESCOPIC HANDLER IDENTIFICATION
[A] Optional or Field Accessory. (Not Standard Equipment).
[B] Attachments - Several different attachments are available for the Bobcat telescopic handler.
[C] ROPS, FOPS - Roll Over Protective Structure, per ISO 3471, and Falling Object Protective Structure
per ISO 3449, Level II.
[D] TIRES - Standard tires are shown. Several different tire styles and sizes are available for the Bobcat telescopic
handler.
ITEM DESCRIPTION ITEM DESCRIPTION
1 Operation & Maintenance Manual and Operator’s
Handbook
12 Boom Stop [A]
2 Mirrors 13 Operator Cab (ROPS and FOPS) [C]
3 Work Lights 14 Rotating Beacon [A]
4 Load Capacity Charts 15 Rear Work Light
5 Front Lights 16 Tail Lights and Direction Signals
6 Telescoping Booms 17 Tires [D]
7 Boom Head 18 Engine Cover
8 Attachment Carrier [B] 19 Stabilizers (if equipped)
9 Boom 20 Sight Level Gauge
10 Parking Brake 21 Rear / Front Interior Mirror
11 Seat Belt
NA9438
NA9439
9
6
8
14
12
11
10
15
2
3
5
7
1
17
2
13
4
16
18
19
20 21
2
17 of 767
Dealer
Copy
--
Not
for
Resale
17. Thank you very much for
your reading. Please Click
Here. Then Get COMPLETE
MANUAL. NO WAITING
NOTE:
If there is no response to
click on the link above,
please download the PDF
document first and then
click on it.
22 of 767
18. T35105 / T35105L / T36120SL
10-10-1 Service Manual
LIFTING AND BLOCKING THE TELESCOPIC
HANDLER
Procedure
Always park the machine on a flat, solid and level
surface.
WARNING
MACHINE FALLING OR MOVING CAN CAUSE
SERIOUS INJURY OR DEATH
Put jackstands under the front and rear of the
machine before running engine for service.
W-2718-0208
Figure 10-10-1
STOP the engine. Put the floor jack under the left side of
the front axle. Lift the telescopic handler and install the
first jackstand [Figure 10-10-1].
Figure 10-10-2
Put the floor jack under the right side of the front axle. Lift
the telescopic handler and install the second jackstand
[Figure 10-10-2].
Figure 10-10-3
Put the floor jack under the center of the rear weight. Lift
the telescopic handler and install jackstands [Figure 10-
10-3].
S41675
S41676
S41946
23 of 767
Dealer
Copy
--
Not
for
Resale
19. T35105 / T35105L / T36120SL
10-20-1 Service Manual
OPERATOR CAB
Description
The Bobcat telescopic handler has an operator cab
(ROPS / FOPS) as standard equipment to protect the
operator. The seat belt must be worn for ROPS / FOPS
protection.
Check the ROPS / FOPS cab, mounting, and hardware
for damage. Never modify the ROPS / FOPS cab.
Replace the cab and hardware if damaged. See your
Bobcat dealer for parts.
ROPS / FOPS - Roll Over Protective Structure per ISO
3471, Falling Object Protective Structure per ISO 3449
(FOPS Level II) and OECD code 4, code 9 and code 10.
Operator cab category 1 per EN 15695-1:2009.
The operator cab does not provide protection against
hazardous substances. Do not use this machine under
conditions requiring protection against hazardous
substances.
WARNING
Never modify operator cab by welding, grinding,
drilling holes or adding attachments unless
instructed to do so by Bobcat Company. Do not
operate without right window. Changes to the cab
can cause loss of operator protection from rollover
and falling objects, and result in serious injury or
death.
W-2906-0211
Cab Door
Figure 10-20-1
Figure 10-20-2
The cab door can be opened from the outside of the cab
using the latch (Item 1) [Figure 10-20-1] and opened
from the inside of the cab when you push the lever (Item
1) [Figure 10-20-2] (as shown).
The cab door can be locked (Item 2) [Figure 10-20-1]
with the same key as the starter switch.
P118181
1
2
S41671
1
25 of 767
Dealer
Copy
--
Not
for
Resale
20. T35105 / T35105L / T36120SL
10-20-2 Service Manual
OPERATOR CAB (CONT’D)
Cab Door Window
Figure 10-20-3
Turn the handle (Item 1) [Figure 10-20-3] (as shown) to
unlock the window. Push the window fully open until it
latches against the cab.
Figure 10-20-4
Push the knob (Item 1) [Figure 10-20-4] inside the cab to
disengage the latch and close the window.
Figure 10-20-5
Turn the handle (Item 1) [Figure 10-20-5] back into the
original position (as shown) to lock the window.
S41637
1
P118578
1
S41637
1
26 of 767
Dealer
Copy
--
Not
for
Resale