SlideShare a Scribd company logo
1 of 29
Download to read offline
Service Repair Manual
Models
D5B TRACK TRACTOR
Shutdown SIS
Previous Screen
Product: TRACK-TYPE TRACTOR
Model: D5B TRACK-TYPE TRACTOR 46X
Configuration: D5B LGP TRACTOR / POWER SHIFT / 46X00001-00723 (MACHINE) POWERED BY 3306 ENGINE
Disassembly and Assembly
3304B and 3306B Engines for Caterpillar Built Machines
Media Number -SENR5598-09 Publication Date -01/01/2013 Date Updated -25/01/2013
i02107019
Gear Group (Front) - Install
SMCS - 1206-012
Installation Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 1P-0510 Driver Group 1
B 9S-3263 Thread Lock Compound 1
NOTICE
Keep all parts clean from contaminants.
Contaminants may cause rapid wear and shortened component life.
Note: Check the condition of the gaskets and the O-ring seals. If the gaskets or the O-ring
seals are worn or damaged, use new parts for replacement.
1. Clean the old gasket from the contact surfaces of the timing gear plate and the cylinder
block. Install a new gasket on the cylinder block. Cut the gasket even with the bottom face
of the cylinder block.
1/4D5B LGP TRACTOR / POWER SHIFT / 46X00001-00723 (MACHINE) POWERED...
2019/8/29https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
Illustration 1 g00476419
NOTICE
The bolts that hold the timing gear plate in position on the cylinder
block should have a reduced bolt head thickness. The reduced bolt
head thickness is needed for clearance for the gears.
2. Ensure that the O-ring seals are in position on the end of the fuel injection pump housing.
Put timing gear plate (9) in position on the cylinder block. Install bolts (10) .
Illustration 2 g00476418
3. Install shield (7). Install nuts (8) .
Note: After the timing gear plate is installed, ensure that the rack is free to move in the fuel
injection pump housing. The O-ring seal on the drive end of the fuel injection pump housing
can hold the rack. This can help prevent free rack movement. Rack movement can be seen
through a hole in the timing gear plate just above the mounting of the fuel pump gear. If the
rack does not move freely, remove the timing gear plate and check the O-ring seal on the
drive end of the fuel injection pump housing.
2/4D5B LGP TRACTOR / POWER SHIFT / 46X00001-00723 (MACHINE) POWERED...
2019/8/29https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
If the rack does not move freely, the engine can over speed and be
damaged. Serious personal injury may result.
Illustration 3 g01072912
Note: If idler gear shaft (11) for the fuel pump idler gear was removed, use Tooling (B) on
the threads of bolts (12) and nut (13) before reinstalling idler gear shaft (11). Tighten bolts
(12) and nut (13) to a torque of 50 ± 10 N·m (37 ± 7 lb ft).
4. Put camshaft gear (6) and plate (5) in position on the engine. Align the Mark "C" on the
camshaft gear with the Mark "C" on the crankshaft gear. Install bolts (4) and tighten bolts
(4) to a torque of 55 ± 7 N·m (41 ± 5 lb ft).
Illustration 4 g00476416
5. Use Tooling (A) in order to install the bearing in fuel pump idler gear (3). The end of the
bearing must be 3.00 ± 0.25 mm (.118 ± .010 inch) below the face of the hub of the fuel
pump idler gear.
3/4D5B LGP TRACTOR / POWER SHIFT / 46X00001-00723 (MACHINE) POWERED...
2019/8/29https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
Illustration 5 g00476414
6. Ensure that the oil hole in the shaft for fuel pump idler gear (3) is open. Install fuel pump
idler gear (3). Put plate (2) in position with the finished side facing toward fuel pump idler
gear (3). Apply Tooling (B) on bolts (1). Install bolts (1) that hold fuel pump idler gear (3)
in position.
Note: Remove excess Tooling (B) on plate (2). Excess Tooling (B) on plate (2) may flow
into the gear bearings. This condition can affect lubrication. Bearing life can also be
affected.
End By: Install the automatic timing advance unit. Refer to Disassembly and Assembly,
"Automatic Timing Advance - Install".
Copyright 1993 - 2019 Caterpillar Inc.
All Rights Reserved.
Private Network For SIS Licensees.
Thu Aug 29 09:40:34 UTC+0800 2019
4/4D5B LGP TRACTOR / POWER SHIFT / 46X00001-00723 (MACHINE) POWERED...
2019/8/29https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
Shutdown SIS
Previous Screen
Product: TRACK-TYPE TRACTOR
Model: D5B TRACK-TYPE TRACTOR 46X
Configuration: D5B LGP TRACTOR / POWER SHIFT / 46X00001-00723 (MACHINE) POWERED BY 3306 ENGINE
Disassembly and Assembly
3304B and 3306B Engines for Caterpillar Built Machines
Media Number -SENR5598-09 Publication Date -01/01/2013 Date Updated -25/01/2013
i02107163
Housing (Front) - Remove
SMCS - 1151-011
Removal Procedure
Start By:
A. Remove the water pump. Refer to Disassembly and Assembly, "Water Pump - Remove".
B. Remove the crankshaft front seal. Refer to Disassembly and Assembly, "Crankshaft Front
Seal - Remove".
NOTICE
Keep all parts clean from contaminants.
Contaminants may cause rapid wear and shortened component life.
NOTICE
Care must be taken to ensure that fluids are contained during
performance of inspection, maintenance, testing, adjusting and repair
of the product. Be prepared to collect the fluid with suitable containers
before opening any compartment or disassembling any component
containing fluids.
Refer to Special Publication, NENG2500, "Caterpillar Tools and Shop
Products Guide" for tools and supplies suitable to collect and contain
fluids on Caterpillar products.
Dispose of all fluids according to local regulations and mandates.
1/2D5B LGP TRACTOR / POWER SHIFT / 46X00001-00723 (MACHINE) POWERED...
2019/8/29https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
1. Remove the bolts that hold the oil pan and the oil pan plate to the front housing. Loosen the
remaining bolts that hold the oil pan in position. Put spacers between the cylinder block and
the oil pan plate. This must be done in order to prevent damage to the gasket for the oil pan
plate.
Note: If the gasket for the oil pan plate is damaged, the oil pan plate must be removed.
Refer to Disassembly and Assembly, "Engine Oil Pan Plate - Remove and Install".
Illustration 1 g00512114
2. Remove covers (1) and (2) from the back of the front plate.
Illustration 2 g00512122
3. Remove all bolts (3) that hold front housing (4) in position on the engine. Remove front
housing (4) and the gasket from the engine.
Copyright 1993 - 2019 Caterpillar Inc.
All Rights Reserved.
Private Network For SIS Licensees.
Thu Aug 29 09:41:19 UTC+0800 2019
2/2D5B LGP TRACTOR / POWER SHIFT / 46X00001-00723 (MACHINE) POWERED...
2019/8/29https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
Shutdown SIS
Previous Screen
Product: TRACK-TYPE TRACTOR
Model: D5B TRACK-TYPE TRACTOR 46X
Configuration: D5B LGP TRACTOR / POWER SHIFT / 46X00001-00723 (MACHINE) POWERED BY 3306 ENGINE
Disassembly and Assembly
3304B and 3306B Engines for Caterpillar Built Machines
Media Number -SENR5598-09 Publication Date -01/01/2013 Date Updated -25/01/2013
i02107191
Housing (Front) - Install
SMCS - 1151-012
Installation Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 3S-6252 Sealant 1
NOTICE
Keep all parts clean from contaminants.
Contaminants may cause rapid wear and shortened component life.
1/2D5B LGP TRACTOR / POWER SHIFT / 46X00001-00723 (MACHINE) POWERED...
2019/8/29https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
Illustration 1 g00512213
1. Put the gasket and front housing (4) in position on the engine. Install all bolts (3) that hold
the front housing to the engine. Tighten bolts (5) to a torque of 23 ± 4 N·m (17 ± 3 lb ft).
Illustration 2 g00512114
2. Put the gasket and cover (1) in position and install the bolts that fasten cover (1) to the front
plate. Put the O-ring seal and cover (2) in position and install the bolts that fasten cover (2)
to the front plate.
3. Trim the front housing gasket so the gasket is even with the bottom of the cylinder block.
Note: If the oil pan plate was removed, install a new gasket and install the oil pan plate.
Refer to Disassembly and Assembly, "Engine Oil Pan Plate - Remove and Install".
4. Apply Tooling (A) to the bottom surface of the front housing gasket. Remove the spacers
that were installed between the cylinder block and the oil pan plate. Install the bolts that
hold the oil pan and the oil pan plate to the front housing. Tighten the remaining bolts that
hold the oil pan in position.
Copyright 1993 - 2019 Caterpillar Inc.
All Rights Reserved.
Private Network For SIS Licensees.
Thu Aug 29 09:42:04 UTC+0800 2019
2/2D5B LGP TRACTOR / POWER SHIFT / 46X00001-00723 (MACHINE) POWERED...
2019/8/29https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
Shutdown SIS
Previous Screen
Product: TRACK-TYPE TRACTOR
Model: D5B TRACK-TYPE TRACTOR 46X
Configuration: D5B LGP TRACTOR / POWER SHIFT / 46X00001-00723 (MACHINE) POWERED BY 3306 ENGINE
Disassembly and Assembly
3304B and 3306B Engines for Caterpillar Built Machines
Media Number -SENR5598-09 Publication Date -01/01/2013 Date Updated -25/01/2013
i04880697
Valve Mechanism Cover - Remove and Install
SMCS - 1107-010
3304B Removal Procedure
NOTICE
Keep all parts clean from contaminants.
Contaminants may cause rapid wear and shortened component life.
Illustration 1 g00590318
1. Loosen hose clamp (5) and remove the hose from breather cap (3) .
2. Remove bolt (1) and remove breather cap (3) .
1/5D5B LGP TRACTOR / POWER SHIFT / 46X00001-00723 (MACHINE) POWERED...
2019/8/29https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
3. Remove bolts (4) and the washers that hold valve mechanism cover (2) in position. Remove
valve mechanism cover (2) and the gasket.
3306B Removal Procedure
NOTICE
Keep all parts clean from contaminants.
Contaminants may cause rapid wear and shortened component life.
Illustration 2 g00513507
1. Remove bolt (1) and breather cap (3) from valve mechanism cover (2) . Remove the O-ring
seal from breather cap (3) .
2. Remove bolts (4) and the washers that hold valve mechanism cover (2) in position. Remove
valve mechanism cover (2) and the gasket.
3304B Installation Procedure
NOTICE
Keep all parts clean from contaminants.
Contaminants may cause rapid wear and shortened component life.
2/5D5B LGP TRACTOR / POWER SHIFT / 46X00001-00723 (MACHINE) POWERED...
2019/8/29https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
Illustration 3 g00590318
Illustration 4 g00590290
Illustration 5 g00590318
3/5D5B LGP TRACTOR / POWER SHIFT / 46X00001-00723 (MACHINE) POWERED...
2019/8/29https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
Note: Check the condition of the gasket. If the gasket is worn or damaged, use new parts for
replacement.
1. Install a new gasket for valve mechanism cover (2) . Apply 5H-2471 Adhesive on the
surfaces of the gasket and valve mechanism cover (2) . Place valve mechanism cover (2) in
position on the cylinder head.
2. Install bolts (4) that hold valve mechanism cover (2) . Tighten the bolts in a numerical
sequence to a torque of 16 ± 3 N·m (12 ± 2 lb ft).
3. Install the hose on breather cap (3) and tighten hose clamp (5) .
3306B Installation Procedure
NOTICE
Keep all parts clean from contaminants.
Contaminants may cause rapid wear and shortened component life.
Note: Check the condition of the gasket and O-ring seals. If the gasket or the O-ring seals
are worn or damaged, use new parts for replacement.
Illustration 6 g00513507
1. Install a new gasket for valve mechanism cover (2) . Put valve mechanism cover (2) in
position on the cylinder head.
4/5D5B LGP TRACTOR / POWER SHIFT / 46X00001-00723 (MACHINE) POWERED...
2019/8/29https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
Illustration 7 g00450791
2. Install the washers and bolts (4) that hold valve mechanism cover (2) in position. Tighten
the bolts in a numerical sequence to a torque of 16 ± 3 N·m (12 ± 2 lb ft). Use the numerical
sequence that is shown in illustration 7.
3. Put the O-ring seal and breather cap (3) in position. Install the washer and bolt (1) . Tighten
bolt (1) to a torque of 14 ± 3 N·m (10 ± 2 lb ft).
Copyright 1993 - 2019 Caterpillar Inc.
All Rights Reserved.
Private Network For SIS Licensees.
Thu Aug 29 09:42:50 UTC+0800 2019
5/5D5B LGP TRACTOR / POWER SHIFT / 46X00001-00723 (MACHINE) POWERED...
2019/8/29https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
Shutdown SIS
Previous Screen
Product: TRACK-TYPE TRACTOR
Model: D5B TRACK-TYPE TRACTOR 46X
Configuration: D5B LGP TRACTOR / POWER SHIFT / 46X00001-00723 (MACHINE) POWERED BY 3306 ENGINE
Disassembly and Assembly
3304B and 3306B Engines for Caterpillar Built Machines
Media Number -SENR5598-09 Publication Date -01/01/2013 Date Updated -25/01/2013
i00921540
Compression Brake - Remove
SMCS - 1119-011
Removal Procedure
Start By:
A. Remove the valve mechanism cover. Refer to Disassembly and Assembly, "Valve
Mechanism Cover - Remove and Install".
NOTICE
Keep all parts clean from contaminants.
Contaminants may cause rapid wear and shortened component life.
Illustration 1 g00471009
1/2D5B LGP TRACTOR / POWER SHIFT / 46X00001-00723 (MACHINE) POWERED...
2019/8/29https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
1. Remove four bolts (1). Disconnect wires (2) and (3) .
Illustration 2 g00471010
2. Remove Compression Brake (A) by lifting Compression Brake (A) with one hand. Remove
Compression Brake (A) while you hold oil tube (4) in order to ensure that oil tube (4) does
not come out of Compression Brake (B) .
3. Remove Compression Brake (B) .
Copyright 1993 - 2019 Caterpillar Inc.
All Rights Reserved.
Private Network For SIS Licensees.
Thu Aug 29 09:43:34 UTC+0800 2019
2/2D5B LGP TRACTOR / POWER SHIFT / 46X00001-00723 (MACHINE) POWERED...
2019/8/29https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
Shutdown SIS
Previous Screen
Product: TRACK-TYPE TRACTOR
Model: D5B TRACK-TYPE TRACTOR 46X
Configuration: D5B LGP TRACTOR / POWER SHIFT / 46X00001-00723 (MACHINE) POWERED BY 3306 ENGINE
Disassembly and Assembly
3304B and 3306B Engines for Caterpillar Built Machines
Media Number -SENR5598-09 Publication Date -01/01/2013 Date Updated -25/01/2013
i00921740
Compression Brake - Disassemble
SMCS - 1119-015
Disassembly Procedure
Start By:
A. Remove the Compression Brake. Refer to Disassembly and Assembly, "Compression Brake
- Remove".
NOTICE
Keep all parts clean from contaminants.
Contaminants may cause rapid wear and shortened component life.
Illustration 1 g00471083
1/3D5B LGP TRACTOR / POWER SHIFT / 46X00001-00723 (MACHINE) POWERED...
2019/8/29https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
1. Remove oil tubes (1) and (2). Remove the O-ring seals.
Note: If the O-ring seals are worn or damaged, use new parts for replacement.
Illustration 2 g00471084
2. Remove snap ring (7), cup (6), spacer (5), springs (4) and (3) and piston (8) .
Illustration 3 g00471085
3. Remove three retaining rings (13). Remove clip (12), springs (11) and (10) and piston (9)
from three locations on the Compression Brake.
2/3D5B LGP TRACTOR / POWER SHIFT / 46X00001-00723 (MACHINE) POWERED...
2019/8/29https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
Illustration 4 g00471086
4. Remove three bolts (15), washers (16), clips (17) and piston (14) .
Copyright 1993 - 2019 Caterpillar Inc.
All Rights Reserved.
Private Network For SIS Licensees.
Thu Aug 29 09:44:20 UTC+0800 2019
3/3D5B LGP TRACTOR / POWER SHIFT / 46X00001-00723 (MACHINE) POWERED...
2019/8/29https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
Shutdown SIS
Previous Screen
Product: TRACK-TYPE TRACTOR
Model: D5B TRACK-TYPE TRACTOR 46X
Configuration: D5B LGP TRACTOR / POWER SHIFT / 46X00001-00723 (MACHINE) POWERED BY 3306 ENGINE
Disassembly and Assembly
3304B and 3306B Engines for Caterpillar Built Machines
Media Number -SENR5598-09 Publication Date -01/01/2013 Date Updated -25/01/2013
i00921835
Compression Brake - Assemble
SMCS - 1119-016
Assembly Procedure
NOTICE
Keep all parts clean from contaminants.
Contaminants may cause rapid wear and shortened component life.
Illustration 1 g00471086
1. Install piston (14), clips (17), washers (16) and three bolts (15) .
1/3D5B LGP TRACTOR / POWER SHIFT / 46X00001-00723 (MACHINE) POWERED...
2019/8/29https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
Illustration 2 g00471085
2. Install piston (9), springs (10) and (11) and clip (12) on three locations on the Compression
Brake. Install three retaining rings (13) .
Illustration 3 g00471084
3. Install piston (8), springs (3) and (4), spacer (5), cup (6) and snap ring (7) .
Illustration 4 g00471083
2/3D5B LGP TRACTOR / POWER SHIFT / 46X00001-00723 (MACHINE) POWERED...
2019/8/29https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
Note: If the O-ring seals are worn or damaged, use new parts for replacement.
4. Install the O-ring seals. Install oil tubes (1) and (2) .
End By: Install the Compression Brake. Refer to Disassembly and Assembly, "Compression
Brake - Install".
Copyright 1993 - 2019 Caterpillar Inc.
All Rights Reserved.
Private Network For SIS Licensees.
Thu Aug 29 09:45:04 UTC+0800 2019
3/3D5B LGP TRACTOR / POWER SHIFT / 46X00001-00723 (MACHINE) POWERED...
2019/8/29https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
Shutdown SIS
Previous Screen
Product: TRACK-TYPE TRACTOR
Model: D5B TRACK-TYPE TRACTOR 46X
Configuration: D5B LGP TRACTOR / POWER SHIFT / 46X00001-00723 (MACHINE) POWERED BY 3306 ENGINE
Disassembly and Assembly
3304B and 3306B Engines for Caterpillar Built Machines
Media Number -SENR5598-09 Publication Date -01/01/2013 Date Updated -25/01/2013
i00921612
Compression Brake - Install
SMCS - 1119-012
Installation Procedure
NOTICE
Keep all parts clean from contaminants.
Contaminants may cause rapid wear and shortened component life.
Illustration 1 g00471010
1. Install Compression Brake (B) and oil tube (4) .
2. Install Compression Brake (A) .
1/2D5B LGP TRACTOR / POWER SHIFT / 46X00001-00723 (MACHINE) POWERED...
2019/8/29https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
Illustration 2 g00471009
3. Connect wires (3) and (2). Install four bolts (1) .
End By: Install the valve mechanism cover. Refer to Disassembly and Assembly, "Valve
Mechanism Cover - Remove and Install".
Copyright 1993 - 2019 Caterpillar Inc.
All Rights Reserved.
Private Network For SIS Licensees.
Thu Aug 29 09:45:49 UTC+0800 2019
2/2D5B LGP TRACTOR / POWER SHIFT / 46X00001-00723 (MACHINE) POWERED...
2019/8/29https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
Thank you very much for
your reading. Please Click
Here. Then Get COMPLETE
MANUAL. NO WAITING
NOTE:
If there is no response to
click on the link above,
please download the PDF
document first and then
click on it.
Shutdown SIS
Previous Screen
Product: TRACK-TYPE TRACTOR
Model: D5B TRACK-TYPE TRACTOR 46X
Configuration: D5B LGP TRACTOR / POWER SHIFT / 46X00001-00723 (MACHINE) POWERED BY 3306 ENGINE
Disassembly and Assembly
3304B and 3306B Engines for Caterpillar Built Machines
Media Number -SENR5598-09 Publication Date -01/01/2013 Date Updated -25/01/2013
i00999978
Rocker Shaft and Pushrod - Remove
SMCS - 1102-011; 1208-011
Removal Procedure
Start By:
A. Remove the valve mechanism cover. Refer to Disassembly and Assembly, "Valve
Mechanism Cover - Remove and Install".
NOTICE
Keep all parts clean from contaminants.
Contaminants may cause rapid wear and shortened component life.
Illustration 1 g00539802
1/2D5B LGP TRACTOR / POWER SHIFT / 46X00001-00723 (MACHINE) POWERED...
2019/8/29https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
1. Remove six bolts (3) and rocker shaft assembly (2). Remove the O-ring seal from the rear
rocker shaft support.
2. Put identification marks on pushrods (1) in order to identify the location of the pushrods in
the engine. Remove pushrods (1) from the engine. Repeat this process for each pushrod.
Copyright 1993 - 2019 Caterpillar Inc.
All Rights Reserved.
Private Network For SIS Licensees.
Thu Aug 29 09:46:35 UTC+0800 2019
2/2D5B LGP TRACTOR / POWER SHIFT / 46X00001-00723 (MACHINE) POWERED...
2019/8/29https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
Shutdown SIS
Previous Screen
Product: TRACK-TYPE TRACTOR
Model: D5B TRACK-TYPE TRACTOR 46X
Configuration: D5B LGP TRACTOR / POWER SHIFT / 46X00001-00723 (MACHINE) POWERED BY 3306 ENGINE
Disassembly and Assembly
3304B and 3306B Engines for Caterpillar Built Machines
Media Number -SENR5598-09 Publication Date -01/01/2013 Date Updated -25/01/2013
i01001004
Rocker Shaft - Disassemble
SMCS - 1102-015
Disassembly Procedure
Start By:
A. Remove the rocker shaft and pushrods. Refer to Disassembly and Assembly, "Rocker Shaft
and Pushrods - Remove".
NOTICE
Keep all parts clean from contaminants.
Contaminants may cause rapid wear and shortened component life.
Illustration 1 g00490026
1/3D5B LGP TRACTOR / POWER SHIFT / 46X00001-00723 (MACHINE) POWERED...
2019/8/29https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
1. Remove O-ring seal (1) from the rear support bracket.
Note: Replace the O-ring seal when the head bolt is removed from the rear rocker shaft
support.
Illustration 2 g00490027
2. Remove retainer ring (6), washer (5), spring (4), washer (3) and rocker arm (2). Note the
number of washers (3) that are used at both ends of the shaft. Remove rocker arms (2) from
each end of the rocker shaft.
Illustration 3 g00449687
3. Remove the pin from the rear rocker shaft support (7) with a hammer and a suitable punch.
Remove rear rocker shaft support (7) .
4. Remove the remaining rocker arms, springs, washers and rocker shaft supports.
5. Remove the plugs from each end of the shaft, if necessary.
Copyright 1993 - 2019 Caterpillar Inc.
All Rights Reserved.
Thu Aug 29 09:47:20 UTC+0800 2019
2/3D5B LGP TRACTOR / POWER SHIFT / 46X00001-00723 (MACHINE) POWERED...
2019/8/29https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...

More Related Content

What's hot

Caterpillar cat 432 d backhoe loader (prefix wep) service repair manual (wep0...
Caterpillar cat 432 d backhoe loader (prefix wep) service repair manual (wep0...Caterpillar cat 432 d backhoe loader (prefix wep) service repair manual (wep0...
Caterpillar cat 432 d backhoe loader (prefix wep) service repair manual (wep0...
ujfdjjskkemme
 
Caterpillar cat 235 b excavator (prefix 4ed) service repair manual (4ed00001 ...
Caterpillar cat 235 b excavator (prefix 4ed) service repair manual (4ed00001 ...Caterpillar cat 235 b excavator (prefix 4ed) service repair manual (4ed00001 ...
Caterpillar cat 235 b excavator (prefix 4ed) service repair manual (4ed00001 ...
uujjfjjkskmme
 
Caterpillar cat 325 c excavator (prefix crb) service repair manual (crb00001 ...
Caterpillar cat 325 c excavator (prefix crb) service repair manual (crb00001 ...Caterpillar cat 325 c excavator (prefix crb) service repair manual (crb00001 ...
Caterpillar cat 325 c excavator (prefix crb) service repair manual (crb00001 ...
fjsjjekdkme
 
Caterpillar cat 323 d sa excavator (prefix nes) service repair manual (nes000...
Caterpillar cat 323 d sa excavator (prefix nes) service repair manual (nes000...Caterpillar cat 323 d sa excavator (prefix nes) service repair manual (nes000...
Caterpillar cat 323 d sa excavator (prefix nes) service repair manual (nes000...
jfdskekdmme
 
Caterpillar cat 225 excavator (prefix 76 u) service repair manual (76u03765 a...
Caterpillar cat 225 excavator (prefix 76 u) service repair manual (76u03765 a...Caterpillar cat 225 excavator (prefix 76 u) service repair manual (76u03765 a...
Caterpillar cat 225 excavator (prefix 76 u) service repair manual (76u03765 a...
ujfjjskekfmmde
 
Caterpillar cat 430 f backhoe loader (prefix ldy) service repair manual (ldy0...
Caterpillar cat 430 f backhoe loader (prefix ldy) service repair manual (ldy0...Caterpillar cat 430 f backhoe loader (prefix ldy) service repair manual (ldy0...
Caterpillar cat 430 f backhoe loader (prefix ldy) service repair manual (ldy0...
fjjskekskemmm
 
Caterpillar cat 315 d l excavator (prefix kbd) service repair manual (kbd0000...
Caterpillar cat 315 d l excavator (prefix kbd) service repair manual (kbd0000...Caterpillar cat 315 d l excavator (prefix kbd) service repair manual (kbd0000...
Caterpillar cat 315 d l excavator (prefix kbd) service repair manual (kbd0000...
fjskefkemms
 

What's hot (7)

Caterpillar cat 432 d backhoe loader (prefix wep) service repair manual (wep0...
Caterpillar cat 432 d backhoe loader (prefix wep) service repair manual (wep0...Caterpillar cat 432 d backhoe loader (prefix wep) service repair manual (wep0...
Caterpillar cat 432 d backhoe loader (prefix wep) service repair manual (wep0...
 
Caterpillar cat 235 b excavator (prefix 4ed) service repair manual (4ed00001 ...
Caterpillar cat 235 b excavator (prefix 4ed) service repair manual (4ed00001 ...Caterpillar cat 235 b excavator (prefix 4ed) service repair manual (4ed00001 ...
Caterpillar cat 235 b excavator (prefix 4ed) service repair manual (4ed00001 ...
 
Caterpillar cat 325 c excavator (prefix crb) service repair manual (crb00001 ...
Caterpillar cat 325 c excavator (prefix crb) service repair manual (crb00001 ...Caterpillar cat 325 c excavator (prefix crb) service repair manual (crb00001 ...
Caterpillar cat 325 c excavator (prefix crb) service repair manual (crb00001 ...
 
Caterpillar cat 323 d sa excavator (prefix nes) service repair manual (nes000...
Caterpillar cat 323 d sa excavator (prefix nes) service repair manual (nes000...Caterpillar cat 323 d sa excavator (prefix nes) service repair manual (nes000...
Caterpillar cat 323 d sa excavator (prefix nes) service repair manual (nes000...
 
Caterpillar cat 225 excavator (prefix 76 u) service repair manual (76u03765 a...
Caterpillar cat 225 excavator (prefix 76 u) service repair manual (76u03765 a...Caterpillar cat 225 excavator (prefix 76 u) service repair manual (76u03765 a...
Caterpillar cat 225 excavator (prefix 76 u) service repair manual (76u03765 a...
 
Caterpillar cat 430 f backhoe loader (prefix ldy) service repair manual (ldy0...
Caterpillar cat 430 f backhoe loader (prefix ldy) service repair manual (ldy0...Caterpillar cat 430 f backhoe loader (prefix ldy) service repair manual (ldy0...
Caterpillar cat 430 f backhoe loader (prefix ldy) service repair manual (ldy0...
 
Caterpillar cat 315 d l excavator (prefix kbd) service repair manual (kbd0000...
Caterpillar cat 315 d l excavator (prefix kbd) service repair manual (kbd0000...Caterpillar cat 315 d l excavator (prefix kbd) service repair manual (kbd0000...
Caterpillar cat 315 d l excavator (prefix kbd) service repair manual (kbd0000...
 

Similar to Caterpillar cat d5 b track tractor (prefix 46x) service repair manual (46x00001 00723)

Caterpillar cat 235 c front shovel (prefix 4dg) service repair manual (4dg000...
Caterpillar cat 235 c front shovel (prefix 4dg) service repair manual (4dg000...Caterpillar cat 235 c front shovel (prefix 4dg) service repair manual (4dg000...
Caterpillar cat 235 c front shovel (prefix 4dg) service repair manual (4dg000...
uudfjjjskkemmd
 
Caterpillar cat 235 c front shovel (prefix 4dg) service repair manual (4dg000...
Caterpillar cat 235 c front shovel (prefix 4dg) service repair manual (4dg000...Caterpillar cat 235 c front shovel (prefix 4dg) service repair manual (4dg000...
Caterpillar cat 235 c front shovel (prefix 4dg) service repair manual (4dg000...
fujsfskekem
 
Caterpillar cat 235 c front shovel (prefix 4dg) service repair manual (4dg000...
Caterpillar cat 235 c front shovel (prefix 4dg) service repair manual (4dg000...Caterpillar cat 235 c front shovel (prefix 4dg) service repair manual (4dg000...
Caterpillar cat 235 c front shovel (prefix 4dg) service repair manual (4dg000...
ujjfdjkjskkmdm
 
Caterpillar cat 160 h motor grader (prefix xzk) service repair manual (xzk000...
Caterpillar cat 160 h motor grader (prefix xzk) service repair manual (xzk000...Caterpillar cat 160 h motor grader (prefix xzk) service repair manual (xzk000...
Caterpillar cat 160 h motor grader (prefix xzk) service repair manual (xzk000...
ufdjskeksmemzx
 
Caterpillar cat 160 h motor grader (prefix xzk) service repair manual (xzk000...
Caterpillar cat 160 h motor grader (prefix xzk) service repair manual (xzk000...Caterpillar cat 160 h motor grader (prefix xzk) service repair manual (xzk000...
Caterpillar cat 160 h motor grader (prefix xzk) service repair manual (xzk000...
fujsfkkskekmem
 
Caterpillar cat 160 h motor grader (prefix xzk) service repair manual (xzk000...
Caterpillar cat 160 h motor grader (prefix xzk) service repair manual (xzk000...Caterpillar cat 160 h motor grader (prefix xzk) service repair manual (xzk000...
Caterpillar cat 160 h motor grader (prefix xzk) service repair manual (xzk000...
fjskexswksemmm
 

Similar to Caterpillar cat d5 b track tractor (prefix 46x) service repair manual (46x00001 00723) (9)

Caterpillar cat 235 c front shovel (prefix 4dg) service repair manual (4dg000...
Caterpillar cat 235 c front shovel (prefix 4dg) service repair manual (4dg000...Caterpillar cat 235 c front shovel (prefix 4dg) service repair manual (4dg000...
Caterpillar cat 235 c front shovel (prefix 4dg) service repair manual (4dg000...
 
Caterpillar cat 235 c front shovel (prefix 4dg) service repair manual (4dg000...
Caterpillar cat 235 c front shovel (prefix 4dg) service repair manual (4dg000...Caterpillar cat 235 c front shovel (prefix 4dg) service repair manual (4dg000...
Caterpillar cat 235 c front shovel (prefix 4dg) service repair manual (4dg000...
 
Caterpillar cat 235 c front shovel (prefix 4dg) service repair manual (4dg000...
Caterpillar cat 235 c front shovel (prefix 4dg) service repair manual (4dg000...Caterpillar cat 235 c front shovel (prefix 4dg) service repair manual (4dg000...
Caterpillar cat 235 c front shovel (prefix 4dg) service repair manual (4dg000...
 
Caterpillar cat 235 c front shovel (prefix 4dg) service repair manual (4dg000...
Caterpillar cat 235 c front shovel (prefix 4dg) service repair manual (4dg000...Caterpillar cat 235 c front shovel (prefix 4dg) service repair manual (4dg000...
Caterpillar cat 235 c front shovel (prefix 4dg) service repair manual (4dg000...
 
Caterpillar cat 235 c front shovel (prefix 4dg) service repair manual (4dg000...
Caterpillar cat 235 c front shovel (prefix 4dg) service repair manual (4dg000...Caterpillar cat 235 c front shovel (prefix 4dg) service repair manual (4dg000...
Caterpillar cat 235 c front shovel (prefix 4dg) service repair manual (4dg000...
 
Caterpillar cat 160 h motor grader (prefix xzk) service repair manual (xzk000...
Caterpillar cat 160 h motor grader (prefix xzk) service repair manual (xzk000...Caterpillar cat 160 h motor grader (prefix xzk) service repair manual (xzk000...
Caterpillar cat 160 h motor grader (prefix xzk) service repair manual (xzk000...
 
Caterpillar cat 160 h motor grader (prefix xzk) service repair manual (xzk000...
Caterpillar cat 160 h motor grader (prefix xzk) service repair manual (xzk000...Caterpillar cat 160 h motor grader (prefix xzk) service repair manual (xzk000...
Caterpillar cat 160 h motor grader (prefix xzk) service repair manual (xzk000...
 
Caterpillar cat 160 h motor grader (prefix xzk) service repair manual (xzk000...
Caterpillar cat 160 h motor grader (prefix xzk) service repair manual (xzk000...Caterpillar cat 160 h motor grader (prefix xzk) service repair manual (xzk000...
Caterpillar cat 160 h motor grader (prefix xzk) service repair manual (xzk000...
 
Caterpillar cat 160 h motor grader (prefix xzk) service repair manual (xzk000...
Caterpillar cat 160 h motor grader (prefix xzk) service repair manual (xzk000...Caterpillar cat 160 h motor grader (prefix xzk) service repair manual (xzk000...
Caterpillar cat 160 h motor grader (prefix xzk) service repair manual (xzk000...
 

More from ufjjsjekkmdme

New holland l228 tier 4 b (final) north america skid steer loader service rep...
New holland l228 tier 4 b (final) north america skid steer loader service rep...New holland l228 tier 4 b (final) north america skid steer loader service rep...
New holland l228 tier 4 b (final) north america skid steer loader service rep...
ufjjsjekkmdme
 
New holland c227 tier 4 b final [ndm471836 ]europe compact track loader serv...
New holland c227 tier 4 b final [ndm471836  ]europe compact track loader serv...New holland c227 tier 4 b final [ndm471836  ]europe compact track loader serv...
New holland c227 tier 4 b final [ndm471836 ]europe compact track loader serv...
ufjjsjekkmdme
 
Caterpillar cat e70 b excavator (prefix 5tg) service repair manual (5tg00001 ...
Caterpillar cat e70 b excavator (prefix 5tg) service repair manual (5tg00001 ...Caterpillar cat e70 b excavator (prefix 5tg) service repair manual (5tg00001 ...
Caterpillar cat e70 b excavator (prefix 5tg) service repair manual (5tg00001 ...
ufjjsjekkmdme
 
Caterpillar cat e70 excavator (prefix 3 bg) service repair manual (3bg00001 up)
Caterpillar cat e70 excavator (prefix 3 bg) service repair manual (3bg00001 up)Caterpillar cat e70 excavator (prefix 3 bg) service repair manual (3bg00001 up)
Caterpillar cat e70 excavator (prefix 3 bg) service repair manual (3bg00001 up)
ufjjsjekkmdme
 
Caterpillar cat d6 r track tractor (prefix 7gr) service repair manual (7gr000...
Caterpillar cat d6 r track tractor (prefix 7gr) service repair manual (7gr000...Caterpillar cat d6 r track tractor (prefix 7gr) service repair manual (7gr000...
Caterpillar cat d6 r track tractor (prefix 7gr) service repair manual (7gr000...
ufjjsjekkmdme
 
Caterpillar cat d5 htsk ii track skidder (prefix 7eg) service repair manual (...
Caterpillar cat d5 htsk ii track skidder (prefix 7eg) service repair manual (...Caterpillar cat d5 htsk ii track skidder (prefix 7eg) service repair manual (...
Caterpillar cat d5 htsk ii track skidder (prefix 7eg) service repair manual (...
ufjjsjekkmdme
 
Caterpillar cat d4 htsk iii track skidder (prefix 7pk) service repair manual ...
Caterpillar cat d4 htsk iii track skidder (prefix 7pk) service repair manual ...Caterpillar cat d4 htsk iii track skidder (prefix 7pk) service repair manual ...
Caterpillar cat d4 htsk iii track skidder (prefix 7pk) service repair manual ...
ufjjsjekkmdme
 
Caterpillar cat d4 htsk ii track skidder (prefix 8zf) service repair manual (...
Caterpillar cat d4 htsk ii track skidder (prefix 8zf) service repair manual (...Caterpillar cat d4 htsk ii track skidder (prefix 8zf) service repair manual (...
Caterpillar cat d4 htsk ii track skidder (prefix 8zf) service repair manual (...
ufjjsjekkmdme
 
Caterpillar cat 951 c track loader (prefix 69h) service repair manual (69h036...
Caterpillar cat 951 c track loader (prefix 69h) service repair manual (69h036...Caterpillar cat 951 c track loader (prefix 69h) service repair manual (69h036...
Caterpillar cat 951 c track loader (prefix 69h) service repair manual (69h036...
ufjjsjekkmdme
 
Caterpillar cat 951 b track loader (prefix 86j) service repair manual (86j025...
Caterpillar cat 951 b track loader (prefix 86j) service repair manual (86j025...Caterpillar cat 951 b track loader (prefix 86j) service repair manual (86j025...
Caterpillar cat 951 b track loader (prefix 86j) service repair manual (86j025...
ufjjsjekkmdme
 
Caterpillar cat 422 e backhoe loader (prefix maw) service repair manual (maw0...
Caterpillar cat 422 e backhoe loader (prefix maw) service repair manual (maw0...Caterpillar cat 422 e backhoe loader (prefix maw) service repair manual (maw0...
Caterpillar cat 422 e backhoe loader (prefix maw) service repair manual (maw0...
ufjjsjekkmdme
 
Caterpillar cat 420 f backhoe loader (prefix skr) service repair manual (skr0...
Caterpillar cat 420 f backhoe loader (prefix skr) service repair manual (skr0...Caterpillar cat 420 f backhoe loader (prefix skr) service repair manual (skr0...
Caterpillar cat 420 f backhoe loader (prefix skr) service repair manual (skr0...
ufjjsjekkmdme
 
Caterpillar cat 420 f backhoe loader (prefix ltg) service repair manual (ltg0...
Caterpillar cat 420 f backhoe loader (prefix ltg) service repair manual (ltg0...Caterpillar cat 420 f backhoe loader (prefix ltg) service repair manual (ltg0...
Caterpillar cat 420 f backhoe loader (prefix ltg) service repair manual (ltg0...
ufjjsjekkmdme
 
Caterpillar cat 420 e backhoe loader (prefix pra) service repair manual (pra0...
Caterpillar cat 420 e backhoe loader (prefix pra) service repair manual (pra0...Caterpillar cat 420 e backhoe loader (prefix pra) service repair manual (pra0...
Caterpillar cat 420 e backhoe loader (prefix pra) service repair manual (pra0...
ufjjsjekkmdme
 
Caterpillar cat 420 e backhoe loader (prefix phc) service repair manual (phc0...
Caterpillar cat 420 e backhoe loader (prefix phc) service repair manual (phc0...Caterpillar cat 420 e backhoe loader (prefix phc) service repair manual (phc0...
Caterpillar cat 420 e backhoe loader (prefix phc) service repair manual (phc0...
ufjjsjekkmdme
 
Caterpillar cat 420 e backhoe loader (prefix kmw) service repair manual (kmw0...
Caterpillar cat 420 e backhoe loader (prefix kmw) service repair manual (kmw0...Caterpillar cat 420 e backhoe loader (prefix kmw) service repair manual (kmw0...
Caterpillar cat 420 e backhoe loader (prefix kmw) service repair manual (kmw0...
ufjjsjekkmdme
 
Caterpillar cat 420 e backhoe loader (prefix hls) service repair manual (hls0...
Caterpillar cat 420 e backhoe loader (prefix hls) service repair manual (hls0...Caterpillar cat 420 e backhoe loader (prefix hls) service repair manual (hls0...
Caterpillar cat 420 e backhoe loader (prefix hls) service repair manual (hls0...
ufjjsjekkmdme
 

More from ufjjsjekkmdme (20)

New holland l228 tier 4 b (final) north america skid steer loader service rep...
New holland l228 tier 4 b (final) north america skid steer loader service rep...New holland l228 tier 4 b (final) north america skid steer loader service rep...
New holland l228 tier 4 b (final) north america skid steer loader service rep...
 
New holland cs640 combine harvesters service repair manual
New holland cs640 combine harvesters service repair manualNew holland cs640 combine harvesters service repair manual
New holland cs640 combine harvesters service repair manual
 
New holland c227 tier 4 b final [ndm471836 ]europe compact track loader serv...
New holland c227 tier 4 b final [ndm471836  ]europe compact track loader serv...New holland c227 tier 4 b final [ndm471836  ]europe compact track loader serv...
New holland c227 tier 4 b final [ndm471836 ]europe compact track loader serv...
 
New holland b115 c backhoe loader service repair manual
New holland b115 c backhoe loader service repair manualNew holland b115 c backhoe loader service repair manual
New holland b115 c backhoe loader service repair manual
 
New holland b110 ctc backhoe loader service repair manual
New holland b110 ctc backhoe loader service repair manualNew holland b110 ctc backhoe loader service repair manual
New holland b110 ctc backhoe loader service repair manual
 
Caterpillar cat e70 b excavator (prefix 5tg) service repair manual (5tg00001 ...
Caterpillar cat e70 b excavator (prefix 5tg) service repair manual (5tg00001 ...Caterpillar cat e70 b excavator (prefix 5tg) service repair manual (5tg00001 ...
Caterpillar cat e70 b excavator (prefix 5tg) service repair manual (5tg00001 ...
 
Caterpillar cat e70 excavator (prefix 3 bg) service repair manual (3bg00001 up)
Caterpillar cat e70 excavator (prefix 3 bg) service repair manual (3bg00001 up)Caterpillar cat e70 excavator (prefix 3 bg) service repair manual (3bg00001 up)
Caterpillar cat e70 excavator (prefix 3 bg) service repair manual (3bg00001 up)
 
Caterpillar cat d6 r track tractor (prefix 7gr) service repair manual (7gr000...
Caterpillar cat d6 r track tractor (prefix 7gr) service repair manual (7gr000...Caterpillar cat d6 r track tractor (prefix 7gr) service repair manual (7gr000...
Caterpillar cat d6 r track tractor (prefix 7gr) service repair manual (7gr000...
 
Caterpillar cat d5 htsk ii track skidder (prefix 7eg) service repair manual (...
Caterpillar cat d5 htsk ii track skidder (prefix 7eg) service repair manual (...Caterpillar cat d5 htsk ii track skidder (prefix 7eg) service repair manual (...
Caterpillar cat d5 htsk ii track skidder (prefix 7eg) service repair manual (...
 
Caterpillar cat d4 htsk iii track skidder (prefix 7pk) service repair manual ...
Caterpillar cat d4 htsk iii track skidder (prefix 7pk) service repair manual ...Caterpillar cat d4 htsk iii track skidder (prefix 7pk) service repair manual ...
Caterpillar cat d4 htsk iii track skidder (prefix 7pk) service repair manual ...
 
Caterpillar cat d4 htsk ii track skidder (prefix 8zf) service repair manual (...
Caterpillar cat d4 htsk ii track skidder (prefix 8zf) service repair manual (...Caterpillar cat d4 htsk ii track skidder (prefix 8zf) service repair manual (...
Caterpillar cat d4 htsk ii track skidder (prefix 8zf) service repair manual (...
 
Caterpillar cat 951 c track loader (prefix 69h) service repair manual (69h036...
Caterpillar cat 951 c track loader (prefix 69h) service repair manual (69h036...Caterpillar cat 951 c track loader (prefix 69h) service repair manual (69h036...
Caterpillar cat 951 c track loader (prefix 69h) service repair manual (69h036...
 
Caterpillar cat 951 b track loader (prefix 86j) service repair manual (86j025...
Caterpillar cat 951 b track loader (prefix 86j) service repair manual (86j025...Caterpillar cat 951 b track loader (prefix 86j) service repair manual (86j025...
Caterpillar cat 951 b track loader (prefix 86j) service repair manual (86j025...
 
Caterpillar cat 422 e backhoe loader (prefix maw) service repair manual (maw0...
Caterpillar cat 422 e backhoe loader (prefix maw) service repair manual (maw0...Caterpillar cat 422 e backhoe loader (prefix maw) service repair manual (maw0...
Caterpillar cat 422 e backhoe loader (prefix maw) service repair manual (maw0...
 
Caterpillar cat 420 f backhoe loader (prefix skr) service repair manual (skr0...
Caterpillar cat 420 f backhoe loader (prefix skr) service repair manual (skr0...Caterpillar cat 420 f backhoe loader (prefix skr) service repair manual (skr0...
Caterpillar cat 420 f backhoe loader (prefix skr) service repair manual (skr0...
 
Caterpillar cat 420 f backhoe loader (prefix ltg) service repair manual (ltg0...
Caterpillar cat 420 f backhoe loader (prefix ltg) service repair manual (ltg0...Caterpillar cat 420 f backhoe loader (prefix ltg) service repair manual (ltg0...
Caterpillar cat 420 f backhoe loader (prefix ltg) service repair manual (ltg0...
 
Caterpillar cat 420 e backhoe loader (prefix pra) service repair manual (pra0...
Caterpillar cat 420 e backhoe loader (prefix pra) service repair manual (pra0...Caterpillar cat 420 e backhoe loader (prefix pra) service repair manual (pra0...
Caterpillar cat 420 e backhoe loader (prefix pra) service repair manual (pra0...
 
Caterpillar cat 420 e backhoe loader (prefix phc) service repair manual (phc0...
Caterpillar cat 420 e backhoe loader (prefix phc) service repair manual (phc0...Caterpillar cat 420 e backhoe loader (prefix phc) service repair manual (phc0...
Caterpillar cat 420 e backhoe loader (prefix phc) service repair manual (phc0...
 
Caterpillar cat 420 e backhoe loader (prefix kmw) service repair manual (kmw0...
Caterpillar cat 420 e backhoe loader (prefix kmw) service repair manual (kmw0...Caterpillar cat 420 e backhoe loader (prefix kmw) service repair manual (kmw0...
Caterpillar cat 420 e backhoe loader (prefix kmw) service repair manual (kmw0...
 
Caterpillar cat 420 e backhoe loader (prefix hls) service repair manual (hls0...
Caterpillar cat 420 e backhoe loader (prefix hls) service repair manual (hls0...Caterpillar cat 420 e backhoe loader (prefix hls) service repair manual (hls0...
Caterpillar cat 420 e backhoe loader (prefix hls) service repair manual (hls0...
 

Recently uploaded

出售伯明翰大学毕业证研究生文凭证书原版质量
出售伯明翰大学毕业证研究生文凭证书原版质量出售伯明翰大学毕业证研究生文凭证书原版质量
出售伯明翰大学毕业证研究生文凭证书原版质量
kthcah
 
一比一原版(Auburn毕业证书)奥本大学毕业证原件一模一样
一比一原版(Auburn毕业证书)奥本大学毕业证原件一模一样一比一原版(Auburn毕业证书)奥本大学毕业证原件一模一样
一比一原版(Auburn毕业证书)奥本大学毕业证原件一模一样
AS
 
一比一原版(Rutgers毕业证书)罗格斯大学毕业证成绩单原件一模一样
一比一原版(Rutgers毕业证书)罗格斯大学毕业证成绩单原件一模一样一比一原版(Rutgers毕业证书)罗格斯大学毕业证成绩单原件一模一样
一比一原版(Rutgers毕业证书)罗格斯大学毕业证成绩单原件一模一样
A
 
一比一原版(CCA毕业证书)加利福尼亚艺术学院毕业证成绩单原件一模一样
一比一原版(CCA毕业证书)加利福尼亚艺术学院毕业证成绩单原件一模一样一比一原版(CCA毕业证书)加利福尼亚艺术学院毕业证成绩单原件一模一样
一比一原版(CCA毕业证书)加利福尼亚艺术学院毕业证成绩单原件一模一样
zovambe
 
John Deere 990 Compact Utility Tractor Shop Manual.pdf
John Deere 990 Compact Utility Tractor Shop Manual.pdfJohn Deere 990 Compact Utility Tractor Shop Manual.pdf
John Deere 990 Compact Utility Tractor Shop Manual.pdf
Excavator
 
原版定做(ncl学位证书)英国纽卡斯尔大学毕业证文凭学历证书-国外学历学位认证
原版定做(ncl学位证书)英国纽卡斯尔大学毕业证文凭学历证书-国外学历学位认证原版定做(ncl学位证书)英国纽卡斯尔大学毕业证文凭学历证书-国外学历学位认证
原版定做(ncl学位证书)英国纽卡斯尔大学毕业证文凭学历证书-国外学历学位认证
eehzz
 

Recently uploaded (20)

Auto Glass Repair in Redwood City What to Do When Disaster Strikes.pdf
Auto Glass Repair in Redwood City What to Do When Disaster Strikes.pdfAuto Glass Repair in Redwood City What to Do When Disaster Strikes.pdf
Auto Glass Repair in Redwood City What to Do When Disaster Strikes.pdf
 
出售伯明翰大学毕业证研究生文凭证书原版质量
出售伯明翰大学毕业证研究生文凭证书原版质量出售伯明翰大学毕业证研究生文凭证书原版质量
出售伯明翰大学毕业证研究生文凭证书原版质量
 
一比一原版(Auburn毕业证书)奥本大学毕业证原件一模一样
一比一原版(Auburn毕业证书)奥本大学毕业证原件一模一样一比一原版(Auburn毕业证书)奥本大学毕业证原件一模一样
一比一原版(Auburn毕业证书)奥本大学毕业证原件一模一样
 
一比一原版(Rutgers毕业证书)罗格斯大学毕业证成绩单原件一模一样
一比一原版(Rutgers毕业证书)罗格斯大学毕业证成绩单原件一模一样一比一原版(Rutgers毕业证书)罗格斯大学毕业证成绩单原件一模一样
一比一原版(Rutgers毕业证书)罗格斯大学毕业证成绩单原件一模一样
 
Charging Forward: Bringing Electric Vehicle Charging Infrastructure to Rural ...
Charging Forward: Bringing Electric Vehicle Charging Infrastructure to Rural ...Charging Forward: Bringing Electric Vehicle Charging Infrastructure to Rural ...
Charging Forward: Bringing Electric Vehicle Charging Infrastructure to Rural ...
 
How Do I Know If My Volvo Has Throttle Position Sensor Problems
How Do I Know If My Volvo Has Throttle Position Sensor ProblemsHow Do I Know If My Volvo Has Throttle Position Sensor Problems
How Do I Know If My Volvo Has Throttle Position Sensor Problems
 
What Causes The BMW X7 Power Supply Warning To Illuminate
What Causes The BMW X7 Power Supply Warning To IlluminateWhat Causes The BMW X7 Power Supply Warning To Illuminate
What Causes The BMW X7 Power Supply Warning To Illuminate
 
Why Won't My Mercedes Key Fob Function After A Battery Swap
Why Won't My Mercedes Key Fob Function After A Battery SwapWhy Won't My Mercedes Key Fob Function After A Battery Swap
Why Won't My Mercedes Key Fob Function After A Battery Swap
 
AI for Smart Vehicles - A quick overview
AI for Smart Vehicles - A quick overviewAI for Smart Vehicles - A quick overview
AI for Smart Vehicles - A quick overview
 
Microscope of ppt for botany major this is a project
Microscope of ppt for botany major this is a projectMicroscope of ppt for botany major this is a project
Microscope of ppt for botany major this is a project
 
一比一原版(CCA毕业证书)加利福尼亚艺术学院毕业证成绩单原件一模一样
一比一原版(CCA毕业证书)加利福尼亚艺术学院毕业证成绩单原件一模一样一比一原版(CCA毕业证书)加利福尼亚艺术学院毕业证成绩单原件一模一样
一比一原版(CCA毕业证书)加利福尼亚艺术学院毕业证成绩单原件一模一样
 
John Deere 990 Compact Utility Tractor Shop Manual.pdf
John Deere 990 Compact Utility Tractor Shop Manual.pdfJohn Deere 990 Compact Utility Tractor Shop Manual.pdf
John Deere 990 Compact Utility Tractor Shop Manual.pdf
 
What Might Be Behind Your Mercedes' Inoperative Cruise Control
What Might Be Behind Your Mercedes' Inoperative Cruise ControlWhat Might Be Behind Your Mercedes' Inoperative Cruise Control
What Might Be Behind Your Mercedes' Inoperative Cruise Control
 
Benefits of Load Planning in Fleet Management
Benefits of Load Planning in Fleet ManagementBenefits of Load Planning in Fleet Management
Benefits of Load Planning in Fleet Management
 
Exploring the Heart of Alberta: A Journey from Calgary to Edmonton
Exploring the Heart of Alberta: A Journey from Calgary to EdmontonExploring the Heart of Alberta: A Journey from Calgary to Edmonton
Exploring the Heart of Alberta: A Journey from Calgary to Edmonton
 
Access to Rural Charging by David Skakel
Access to Rural Charging by David SkakelAccess to Rural Charging by David Skakel
Access to Rural Charging by David Skakel
 
What Could Cause Your Audi To Keep Cutting Out
What Could Cause Your Audi To Keep Cutting OutWhat Could Cause Your Audi To Keep Cutting Out
What Could Cause Your Audi To Keep Cutting Out
 
原版定做(ncl学位证书)英国纽卡斯尔大学毕业证文凭学历证书-国外学历学位认证
原版定做(ncl学位证书)英国纽卡斯尔大学毕业证文凭学历证书-国外学历学位认证原版定做(ncl学位证书)英国纽卡斯尔大学毕业证文凭学历证书-国外学历学位认证
原版定做(ncl学位证书)英国纽卡斯尔大学毕业证文凭学历证书-国外学历学位认证
 
Why Is The Glow Plug Light Flashing In My VW & What Does It Indicate
Why Is The Glow Plug Light Flashing In My VW & What Does It IndicateWhy Is The Glow Plug Light Flashing In My VW & What Does It Indicate
Why Is The Glow Plug Light Flashing In My VW & What Does It Indicate
 
Things that make the new Nissan Z unique
Things that make the new Nissan Z uniqueThings that make the new Nissan Z unique
Things that make the new Nissan Z unique
 

Caterpillar cat d5 b track tractor (prefix 46x) service repair manual (46x00001 00723)

  • 2. Shutdown SIS Previous Screen Product: TRACK-TYPE TRACTOR Model: D5B TRACK-TYPE TRACTOR 46X Configuration: D5B LGP TRACTOR / POWER SHIFT / 46X00001-00723 (MACHINE) POWERED BY 3306 ENGINE Disassembly and Assembly 3304B and 3306B Engines for Caterpillar Built Machines Media Number -SENR5598-09 Publication Date -01/01/2013 Date Updated -25/01/2013 i02107019 Gear Group (Front) - Install SMCS - 1206-012 Installation Procedure Table 1 Required Tools Tool Part Number Part Description Qty A 1P-0510 Driver Group 1 B 9S-3263 Thread Lock Compound 1 NOTICE Keep all parts clean from contaminants. Contaminants may cause rapid wear and shortened component life. Note: Check the condition of the gaskets and the O-ring seals. If the gaskets or the O-ring seals are worn or damaged, use new parts for replacement. 1. Clean the old gasket from the contact surfaces of the timing gear plate and the cylinder block. Install a new gasket on the cylinder block. Cut the gasket even with the bottom face of the cylinder block. 1/4D5B LGP TRACTOR / POWER SHIFT / 46X00001-00723 (MACHINE) POWERED... 2019/8/29https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
  • 3. Illustration 1 g00476419 NOTICE The bolts that hold the timing gear plate in position on the cylinder block should have a reduced bolt head thickness. The reduced bolt head thickness is needed for clearance for the gears. 2. Ensure that the O-ring seals are in position on the end of the fuel injection pump housing. Put timing gear plate (9) in position on the cylinder block. Install bolts (10) . Illustration 2 g00476418 3. Install shield (7). Install nuts (8) . Note: After the timing gear plate is installed, ensure that the rack is free to move in the fuel injection pump housing. The O-ring seal on the drive end of the fuel injection pump housing can hold the rack. This can help prevent free rack movement. Rack movement can be seen through a hole in the timing gear plate just above the mounting of the fuel pump gear. If the rack does not move freely, remove the timing gear plate and check the O-ring seal on the drive end of the fuel injection pump housing. 2/4D5B LGP TRACTOR / POWER SHIFT / 46X00001-00723 (MACHINE) POWERED... 2019/8/29https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
  • 4. If the rack does not move freely, the engine can over speed and be damaged. Serious personal injury may result. Illustration 3 g01072912 Note: If idler gear shaft (11) for the fuel pump idler gear was removed, use Tooling (B) on the threads of bolts (12) and nut (13) before reinstalling idler gear shaft (11). Tighten bolts (12) and nut (13) to a torque of 50 ± 10 N·m (37 ± 7 lb ft). 4. Put camshaft gear (6) and plate (5) in position on the engine. Align the Mark "C" on the camshaft gear with the Mark "C" on the crankshaft gear. Install bolts (4) and tighten bolts (4) to a torque of 55 ± 7 N·m (41 ± 5 lb ft). Illustration 4 g00476416 5. Use Tooling (A) in order to install the bearing in fuel pump idler gear (3). The end of the bearing must be 3.00 ± 0.25 mm (.118 ± .010 inch) below the face of the hub of the fuel pump idler gear. 3/4D5B LGP TRACTOR / POWER SHIFT / 46X00001-00723 (MACHINE) POWERED... 2019/8/29https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
  • 5. Illustration 5 g00476414 6. Ensure that the oil hole in the shaft for fuel pump idler gear (3) is open. Install fuel pump idler gear (3). Put plate (2) in position with the finished side facing toward fuel pump idler gear (3). Apply Tooling (B) on bolts (1). Install bolts (1) that hold fuel pump idler gear (3) in position. Note: Remove excess Tooling (B) on plate (2). Excess Tooling (B) on plate (2) may flow into the gear bearings. This condition can affect lubrication. Bearing life can also be affected. End By: Install the automatic timing advance unit. Refer to Disassembly and Assembly, "Automatic Timing Advance - Install". Copyright 1993 - 2019 Caterpillar Inc. All Rights Reserved. Private Network For SIS Licensees. Thu Aug 29 09:40:34 UTC+0800 2019 4/4D5B LGP TRACTOR / POWER SHIFT / 46X00001-00723 (MACHINE) POWERED... 2019/8/29https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
  • 6. Shutdown SIS Previous Screen Product: TRACK-TYPE TRACTOR Model: D5B TRACK-TYPE TRACTOR 46X Configuration: D5B LGP TRACTOR / POWER SHIFT / 46X00001-00723 (MACHINE) POWERED BY 3306 ENGINE Disassembly and Assembly 3304B and 3306B Engines for Caterpillar Built Machines Media Number -SENR5598-09 Publication Date -01/01/2013 Date Updated -25/01/2013 i02107163 Housing (Front) - Remove SMCS - 1151-011 Removal Procedure Start By: A. Remove the water pump. Refer to Disassembly and Assembly, "Water Pump - Remove". B. Remove the crankshaft front seal. Refer to Disassembly and Assembly, "Crankshaft Front Seal - Remove". NOTICE Keep all parts clean from contaminants. Contaminants may cause rapid wear and shortened component life. NOTICE Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids. Refer to Special Publication, NENG2500, "Caterpillar Tools and Shop Products Guide" for tools and supplies suitable to collect and contain fluids on Caterpillar products. Dispose of all fluids according to local regulations and mandates. 1/2D5B LGP TRACTOR / POWER SHIFT / 46X00001-00723 (MACHINE) POWERED... 2019/8/29https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
  • 7. 1. Remove the bolts that hold the oil pan and the oil pan plate to the front housing. Loosen the remaining bolts that hold the oil pan in position. Put spacers between the cylinder block and the oil pan plate. This must be done in order to prevent damage to the gasket for the oil pan plate. Note: If the gasket for the oil pan plate is damaged, the oil pan plate must be removed. Refer to Disassembly and Assembly, "Engine Oil Pan Plate - Remove and Install". Illustration 1 g00512114 2. Remove covers (1) and (2) from the back of the front plate. Illustration 2 g00512122 3. Remove all bolts (3) that hold front housing (4) in position on the engine. Remove front housing (4) and the gasket from the engine. Copyright 1993 - 2019 Caterpillar Inc. All Rights Reserved. Private Network For SIS Licensees. Thu Aug 29 09:41:19 UTC+0800 2019 2/2D5B LGP TRACTOR / POWER SHIFT / 46X00001-00723 (MACHINE) POWERED... 2019/8/29https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
  • 8. Shutdown SIS Previous Screen Product: TRACK-TYPE TRACTOR Model: D5B TRACK-TYPE TRACTOR 46X Configuration: D5B LGP TRACTOR / POWER SHIFT / 46X00001-00723 (MACHINE) POWERED BY 3306 ENGINE Disassembly and Assembly 3304B and 3306B Engines for Caterpillar Built Machines Media Number -SENR5598-09 Publication Date -01/01/2013 Date Updated -25/01/2013 i02107191 Housing (Front) - Install SMCS - 1151-012 Installation Procedure Table 1 Required Tools Tool Part Number Part Description Qty A 3S-6252 Sealant 1 NOTICE Keep all parts clean from contaminants. Contaminants may cause rapid wear and shortened component life. 1/2D5B LGP TRACTOR / POWER SHIFT / 46X00001-00723 (MACHINE) POWERED... 2019/8/29https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
  • 9. Illustration 1 g00512213 1. Put the gasket and front housing (4) in position on the engine. Install all bolts (3) that hold the front housing to the engine. Tighten bolts (5) to a torque of 23 ± 4 N·m (17 ± 3 lb ft). Illustration 2 g00512114 2. Put the gasket and cover (1) in position and install the bolts that fasten cover (1) to the front plate. Put the O-ring seal and cover (2) in position and install the bolts that fasten cover (2) to the front plate. 3. Trim the front housing gasket so the gasket is even with the bottom of the cylinder block. Note: If the oil pan plate was removed, install a new gasket and install the oil pan plate. Refer to Disassembly and Assembly, "Engine Oil Pan Plate - Remove and Install". 4. Apply Tooling (A) to the bottom surface of the front housing gasket. Remove the spacers that were installed between the cylinder block and the oil pan plate. Install the bolts that hold the oil pan and the oil pan plate to the front housing. Tighten the remaining bolts that hold the oil pan in position. Copyright 1993 - 2019 Caterpillar Inc. All Rights Reserved. Private Network For SIS Licensees. Thu Aug 29 09:42:04 UTC+0800 2019 2/2D5B LGP TRACTOR / POWER SHIFT / 46X00001-00723 (MACHINE) POWERED... 2019/8/29https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
  • 10. Shutdown SIS Previous Screen Product: TRACK-TYPE TRACTOR Model: D5B TRACK-TYPE TRACTOR 46X Configuration: D5B LGP TRACTOR / POWER SHIFT / 46X00001-00723 (MACHINE) POWERED BY 3306 ENGINE Disassembly and Assembly 3304B and 3306B Engines for Caterpillar Built Machines Media Number -SENR5598-09 Publication Date -01/01/2013 Date Updated -25/01/2013 i04880697 Valve Mechanism Cover - Remove and Install SMCS - 1107-010 3304B Removal Procedure NOTICE Keep all parts clean from contaminants. Contaminants may cause rapid wear and shortened component life. Illustration 1 g00590318 1. Loosen hose clamp (5) and remove the hose from breather cap (3) . 2. Remove bolt (1) and remove breather cap (3) . 1/5D5B LGP TRACTOR / POWER SHIFT / 46X00001-00723 (MACHINE) POWERED... 2019/8/29https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
  • 11. 3. Remove bolts (4) and the washers that hold valve mechanism cover (2) in position. Remove valve mechanism cover (2) and the gasket. 3306B Removal Procedure NOTICE Keep all parts clean from contaminants. Contaminants may cause rapid wear and shortened component life. Illustration 2 g00513507 1. Remove bolt (1) and breather cap (3) from valve mechanism cover (2) . Remove the O-ring seal from breather cap (3) . 2. Remove bolts (4) and the washers that hold valve mechanism cover (2) in position. Remove valve mechanism cover (2) and the gasket. 3304B Installation Procedure NOTICE Keep all parts clean from contaminants. Contaminants may cause rapid wear and shortened component life. 2/5D5B LGP TRACTOR / POWER SHIFT / 46X00001-00723 (MACHINE) POWERED... 2019/8/29https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
  • 12. Illustration 3 g00590318 Illustration 4 g00590290 Illustration 5 g00590318 3/5D5B LGP TRACTOR / POWER SHIFT / 46X00001-00723 (MACHINE) POWERED... 2019/8/29https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
  • 13. Note: Check the condition of the gasket. If the gasket is worn or damaged, use new parts for replacement. 1. Install a new gasket for valve mechanism cover (2) . Apply 5H-2471 Adhesive on the surfaces of the gasket and valve mechanism cover (2) . Place valve mechanism cover (2) in position on the cylinder head. 2. Install bolts (4) that hold valve mechanism cover (2) . Tighten the bolts in a numerical sequence to a torque of 16 ± 3 N·m (12 ± 2 lb ft). 3. Install the hose on breather cap (3) and tighten hose clamp (5) . 3306B Installation Procedure NOTICE Keep all parts clean from contaminants. Contaminants may cause rapid wear and shortened component life. Note: Check the condition of the gasket and O-ring seals. If the gasket or the O-ring seals are worn or damaged, use new parts for replacement. Illustration 6 g00513507 1. Install a new gasket for valve mechanism cover (2) . Put valve mechanism cover (2) in position on the cylinder head. 4/5D5B LGP TRACTOR / POWER SHIFT / 46X00001-00723 (MACHINE) POWERED... 2019/8/29https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
  • 14. Illustration 7 g00450791 2. Install the washers and bolts (4) that hold valve mechanism cover (2) in position. Tighten the bolts in a numerical sequence to a torque of 16 ± 3 N·m (12 ± 2 lb ft). Use the numerical sequence that is shown in illustration 7. 3. Put the O-ring seal and breather cap (3) in position. Install the washer and bolt (1) . Tighten bolt (1) to a torque of 14 ± 3 N·m (10 ± 2 lb ft). Copyright 1993 - 2019 Caterpillar Inc. All Rights Reserved. Private Network For SIS Licensees. Thu Aug 29 09:42:50 UTC+0800 2019 5/5D5B LGP TRACTOR / POWER SHIFT / 46X00001-00723 (MACHINE) POWERED... 2019/8/29https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
  • 15. Shutdown SIS Previous Screen Product: TRACK-TYPE TRACTOR Model: D5B TRACK-TYPE TRACTOR 46X Configuration: D5B LGP TRACTOR / POWER SHIFT / 46X00001-00723 (MACHINE) POWERED BY 3306 ENGINE Disassembly and Assembly 3304B and 3306B Engines for Caterpillar Built Machines Media Number -SENR5598-09 Publication Date -01/01/2013 Date Updated -25/01/2013 i00921540 Compression Brake - Remove SMCS - 1119-011 Removal Procedure Start By: A. Remove the valve mechanism cover. Refer to Disassembly and Assembly, "Valve Mechanism Cover - Remove and Install". NOTICE Keep all parts clean from contaminants. Contaminants may cause rapid wear and shortened component life. Illustration 1 g00471009 1/2D5B LGP TRACTOR / POWER SHIFT / 46X00001-00723 (MACHINE) POWERED... 2019/8/29https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
  • 16. 1. Remove four bolts (1). Disconnect wires (2) and (3) . Illustration 2 g00471010 2. Remove Compression Brake (A) by lifting Compression Brake (A) with one hand. Remove Compression Brake (A) while you hold oil tube (4) in order to ensure that oil tube (4) does not come out of Compression Brake (B) . 3. Remove Compression Brake (B) . Copyright 1993 - 2019 Caterpillar Inc. All Rights Reserved. Private Network For SIS Licensees. Thu Aug 29 09:43:34 UTC+0800 2019 2/2D5B LGP TRACTOR / POWER SHIFT / 46X00001-00723 (MACHINE) POWERED... 2019/8/29https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
  • 17. Shutdown SIS Previous Screen Product: TRACK-TYPE TRACTOR Model: D5B TRACK-TYPE TRACTOR 46X Configuration: D5B LGP TRACTOR / POWER SHIFT / 46X00001-00723 (MACHINE) POWERED BY 3306 ENGINE Disassembly and Assembly 3304B and 3306B Engines for Caterpillar Built Machines Media Number -SENR5598-09 Publication Date -01/01/2013 Date Updated -25/01/2013 i00921740 Compression Brake - Disassemble SMCS - 1119-015 Disassembly Procedure Start By: A. Remove the Compression Brake. Refer to Disassembly and Assembly, "Compression Brake - Remove". NOTICE Keep all parts clean from contaminants. Contaminants may cause rapid wear and shortened component life. Illustration 1 g00471083 1/3D5B LGP TRACTOR / POWER SHIFT / 46X00001-00723 (MACHINE) POWERED... 2019/8/29https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
  • 18. 1. Remove oil tubes (1) and (2). Remove the O-ring seals. Note: If the O-ring seals are worn or damaged, use new parts for replacement. Illustration 2 g00471084 2. Remove snap ring (7), cup (6), spacer (5), springs (4) and (3) and piston (8) . Illustration 3 g00471085 3. Remove three retaining rings (13). Remove clip (12), springs (11) and (10) and piston (9) from three locations on the Compression Brake. 2/3D5B LGP TRACTOR / POWER SHIFT / 46X00001-00723 (MACHINE) POWERED... 2019/8/29https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
  • 19. Illustration 4 g00471086 4. Remove three bolts (15), washers (16), clips (17) and piston (14) . Copyright 1993 - 2019 Caterpillar Inc. All Rights Reserved. Private Network For SIS Licensees. Thu Aug 29 09:44:20 UTC+0800 2019 3/3D5B LGP TRACTOR / POWER SHIFT / 46X00001-00723 (MACHINE) POWERED... 2019/8/29https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
  • 20. Shutdown SIS Previous Screen Product: TRACK-TYPE TRACTOR Model: D5B TRACK-TYPE TRACTOR 46X Configuration: D5B LGP TRACTOR / POWER SHIFT / 46X00001-00723 (MACHINE) POWERED BY 3306 ENGINE Disassembly and Assembly 3304B and 3306B Engines for Caterpillar Built Machines Media Number -SENR5598-09 Publication Date -01/01/2013 Date Updated -25/01/2013 i00921835 Compression Brake - Assemble SMCS - 1119-016 Assembly Procedure NOTICE Keep all parts clean from contaminants. Contaminants may cause rapid wear and shortened component life. Illustration 1 g00471086 1. Install piston (14), clips (17), washers (16) and three bolts (15) . 1/3D5B LGP TRACTOR / POWER SHIFT / 46X00001-00723 (MACHINE) POWERED... 2019/8/29https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
  • 21. Illustration 2 g00471085 2. Install piston (9), springs (10) and (11) and clip (12) on three locations on the Compression Brake. Install three retaining rings (13) . Illustration 3 g00471084 3. Install piston (8), springs (3) and (4), spacer (5), cup (6) and snap ring (7) . Illustration 4 g00471083 2/3D5B LGP TRACTOR / POWER SHIFT / 46X00001-00723 (MACHINE) POWERED... 2019/8/29https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
  • 22. Note: If the O-ring seals are worn or damaged, use new parts for replacement. 4. Install the O-ring seals. Install oil tubes (1) and (2) . End By: Install the Compression Brake. Refer to Disassembly and Assembly, "Compression Brake - Install". Copyright 1993 - 2019 Caterpillar Inc. All Rights Reserved. Private Network For SIS Licensees. Thu Aug 29 09:45:04 UTC+0800 2019 3/3D5B LGP TRACTOR / POWER SHIFT / 46X00001-00723 (MACHINE) POWERED... 2019/8/29https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
  • 23. Shutdown SIS Previous Screen Product: TRACK-TYPE TRACTOR Model: D5B TRACK-TYPE TRACTOR 46X Configuration: D5B LGP TRACTOR / POWER SHIFT / 46X00001-00723 (MACHINE) POWERED BY 3306 ENGINE Disassembly and Assembly 3304B and 3306B Engines for Caterpillar Built Machines Media Number -SENR5598-09 Publication Date -01/01/2013 Date Updated -25/01/2013 i00921612 Compression Brake - Install SMCS - 1119-012 Installation Procedure NOTICE Keep all parts clean from contaminants. Contaminants may cause rapid wear and shortened component life. Illustration 1 g00471010 1. Install Compression Brake (B) and oil tube (4) . 2. Install Compression Brake (A) . 1/2D5B LGP TRACTOR / POWER SHIFT / 46X00001-00723 (MACHINE) POWERED... 2019/8/29https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
  • 24. Illustration 2 g00471009 3. Connect wires (3) and (2). Install four bolts (1) . End By: Install the valve mechanism cover. Refer to Disassembly and Assembly, "Valve Mechanism Cover - Remove and Install". Copyright 1993 - 2019 Caterpillar Inc. All Rights Reserved. Private Network For SIS Licensees. Thu Aug 29 09:45:49 UTC+0800 2019 2/2D5B LGP TRACTOR / POWER SHIFT / 46X00001-00723 (MACHINE) POWERED... 2019/8/29https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
  • 25. Thank you very much for your reading. Please Click Here. Then Get COMPLETE MANUAL. NO WAITING NOTE: If there is no response to click on the link above, please download the PDF document first and then click on it.
  • 26. Shutdown SIS Previous Screen Product: TRACK-TYPE TRACTOR Model: D5B TRACK-TYPE TRACTOR 46X Configuration: D5B LGP TRACTOR / POWER SHIFT / 46X00001-00723 (MACHINE) POWERED BY 3306 ENGINE Disassembly and Assembly 3304B and 3306B Engines for Caterpillar Built Machines Media Number -SENR5598-09 Publication Date -01/01/2013 Date Updated -25/01/2013 i00999978 Rocker Shaft and Pushrod - Remove SMCS - 1102-011; 1208-011 Removal Procedure Start By: A. Remove the valve mechanism cover. Refer to Disassembly and Assembly, "Valve Mechanism Cover - Remove and Install". NOTICE Keep all parts clean from contaminants. Contaminants may cause rapid wear and shortened component life. Illustration 1 g00539802 1/2D5B LGP TRACTOR / POWER SHIFT / 46X00001-00723 (MACHINE) POWERED... 2019/8/29https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
  • 27. 1. Remove six bolts (3) and rocker shaft assembly (2). Remove the O-ring seal from the rear rocker shaft support. 2. Put identification marks on pushrods (1) in order to identify the location of the pushrods in the engine. Remove pushrods (1) from the engine. Repeat this process for each pushrod. Copyright 1993 - 2019 Caterpillar Inc. All Rights Reserved. Private Network For SIS Licensees. Thu Aug 29 09:46:35 UTC+0800 2019 2/2D5B LGP TRACTOR / POWER SHIFT / 46X00001-00723 (MACHINE) POWERED... 2019/8/29https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
  • 28. Shutdown SIS Previous Screen Product: TRACK-TYPE TRACTOR Model: D5B TRACK-TYPE TRACTOR 46X Configuration: D5B LGP TRACTOR / POWER SHIFT / 46X00001-00723 (MACHINE) POWERED BY 3306 ENGINE Disassembly and Assembly 3304B and 3306B Engines for Caterpillar Built Machines Media Number -SENR5598-09 Publication Date -01/01/2013 Date Updated -25/01/2013 i01001004 Rocker Shaft - Disassemble SMCS - 1102-015 Disassembly Procedure Start By: A. Remove the rocker shaft and pushrods. Refer to Disassembly and Assembly, "Rocker Shaft and Pushrods - Remove". NOTICE Keep all parts clean from contaminants. Contaminants may cause rapid wear and shortened component life. Illustration 1 g00490026 1/3D5B LGP TRACTOR / POWER SHIFT / 46X00001-00723 (MACHINE) POWERED... 2019/8/29https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
  • 29. 1. Remove O-ring seal (1) from the rear support bracket. Note: Replace the O-ring seal when the head bolt is removed from the rear rocker shaft support. Illustration 2 g00490027 2. Remove retainer ring (6), washer (5), spring (4), washer (3) and rocker arm (2). Note the number of washers (3) that are used at both ends of the shaft. Remove rocker arms (2) from each end of the rocker shaft. Illustration 3 g00449687 3. Remove the pin from the rear rocker shaft support (7) with a hammer and a suitable punch. Remove rear rocker shaft support (7) . 4. Remove the remaining rocker arms, springs, washers and rocker shaft supports. 5. Remove the plugs from each end of the shaft, if necessary. Copyright 1993 - 2019 Caterpillar Inc. All Rights Reserved. Thu Aug 29 09:47:20 UTC+0800 2019 2/3D5B LGP TRACTOR / POWER SHIFT / 46X00001-00723 (MACHINE) POWERED... 2019/8/29https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...