The intake manifold gasket is an important component of the Mercedes-Benz that can seal the area between the intake manifold and cylinder head for preventing the air and coolant to escape on that place. It has a series of tubes at the top of the engine for flowing the air-fuel mixture into the engine. Go through the slide to know about the signs of a bad intake manifold gasket in the Mercedes-Benz.

1. WHAT ARE THE SIGNS
OF MERCEDES-BENZ
BAD INTAKE
MANIFOLD GASKET IN
PHOENIX?

2. Intake manifold gasket is used for sealing
the area between the intake manifold and
cylinder head.

3. Moreover, it has a series of tubes at the top
of the engine to flow the air-fuel mixture
into the engine.

4. Thus, the gasket ensures that the right
amount of fluid is stored within the
cylinder for the combustion process.

5. Generally, the intake manifold gasket is a
critical part of the engine in your
Mercedes-Benz.

6. The following points define the signs of
bad intake manifold gasket in the
Mercedes-Benz.

7. COOLANT IN THE OIL
PAN

8. Leakage intake manifold gasket is the
main cause behind the coolant in the oil
pan.

9. Due to these reasons, your car is losing the
cooling properties of the coolant.

10. ENGINE OVERHEATING

11. The coolant must be kept at the
recommended level for keeping the
engine cool.

12. As a result, the coolant level is lower down
in the engine and causes overheating
problems.

13. REDUCE ENGINE
PERFORMANCE

14. Leakage in the intake manifold gasket
will let the air and coolant flow out of
the engine.

15. When it happens, the engine performance
is reduced drastically with other
noticeable problems like:
•
•
•
•

16. PRODUCE EXCESS
WHITE SMOKE

17. If the exhaust system is producing excess
white smoke, then ensure that the intake
manifold gasket begins to fail.

18. At this point, you have to replace the
intake manifold gaskets from a reputed
mechanic.

19. CONCLUSION

20. One can drive a car with a bad intake
manifold gasket, but it is not always
advisable.

21. For reaching your destination safely
inspect the manifold gasket by a
mechanic.