Report
Share
Download to read offline
Recommended
Sound level method
The document discusses noise levels of Excel Dryer's XLERATOR hand dryers. It states that XLERATOR dryers operate at 78-80 dB but can reach over 90 dB if hands are close to the air outlet due to sound deflection from the high-velocity air stream. Excel has developed a new 1.1 nozzle that can lower the decibel level to under 90 dB and adds only 2-3 seconds to drying time. OSHA regulations require ear protection for continuous sound over 90 dB for 8 hours or 95 dB for 4 hours.
Three part specification
The document provides specifications for electric hand dryers manufactured by Excel Dryer Inc. It includes three sections: general notes and requirements, product data submittals, and specifications for the XLERATOR electric hand dryer. The XLERATOR dries hands completely in 10 seconds using 80% less energy than conventional dryers. It has an automatic infrared sensor and is available in plastic, stainless steel, or zinc alloy covers.
Xlerator green-certifications
The document discusses various green certifications and organizations that have endorsed the XLERATOR hand dryer as meeting sustainability standards. It lists several LEED credits the hand dryer can help facilities obtain and notes the hand dryer is GreenSpec listed, endorsed by the Green Restaurant Association and Green Hotels Association, and listed in the Oikos Product Directory. The Green Building Initiative is also mentioned as an organization Excel Dryer supports.
Hygiene studies
Several studies have found that warm air hand dryers are more hygienic than other drying methods like paper towels. They reduce bacteria and viruses on hands more effectively due to the warm air penetrating crevices and dehydrating the skin faster. While one study funded by paper towel makers found otherwise, it had flawed methodology and was not peer reviewed. Most medical research has concluded that warm air dryers do not spread more bacteria in the air and may reduce it compared to other surfaces in washrooms.
Niles Township Case Study
Niles Township School District 219 in Illinois was facing budget cuts and looking for ways to reduce costs. They installed Excel XLERATOR hand dryers in the school restrooms to replace paper towels and traditional hand dryers. This saved the district over $16,500 per year in reduced maintenance costs and $12,500 in paper towel costs. The dryers also used less energy, saving $4,160 per year. The dryers paid for themselves within two years and helped teach students the importance of reducing waste and conserving energy.
Publictoilet
The document provides an overview of a development project focused on improving the public perception of public restrooms. It discusses common nuisances faced by users, such as a lack of privacy and cleanliness. Research included visits to local restrooms and interviews with users. Analysis found users were uncomfortable with shared and dirty spaces. The concept presented is a modular restroom system centered around a self-cleaning toilet pod called an "Escape Pod." The pod aims to provide privacy, cleanliness and sustainability through features like a steam-cleaned seat, integrated hand dryer and water recycling. A prototype was built to demonstrate the concept. Further business development is discussed to commercialize the improved public restroom experience.
New industry-standard
The document summarizes Excel Dryer's XLERATOR hand dryer. Key points:
- The XLERATOR dries hands 3 times faster than conventional dryers, in 10-15 seconds, using 80% less energy.
- It has received numerous awards and designations, including being the first hand dryer approved by GreenSpec and to help qualify for LEED credits.
- An analysis shows the XLERATOR outperforms paper towels on energy use and other environmental impacts.
Recommended
Sound level method
The document discusses noise levels of Excel Dryer's XLERATOR hand dryers. It states that XLERATOR dryers operate at 78-80 dB but can reach over 90 dB if hands are close to the air outlet due to sound deflection from the high-velocity air stream. Excel has developed a new 1.1 nozzle that can lower the decibel level to under 90 dB and adds only 2-3 seconds to drying time. OSHA regulations require ear protection for continuous sound over 90 dB for 8 hours or 95 dB for 4 hours.
Three part specification
The document provides specifications for electric hand dryers manufactured by Excel Dryer Inc. It includes three sections: general notes and requirements, product data submittals, and specifications for the XLERATOR electric hand dryer. The XLERATOR dries hands completely in 10 seconds using 80% less energy than conventional dryers. It has an automatic infrared sensor and is available in plastic, stainless steel, or zinc alloy covers.
Xlerator green-certifications
The document discusses various green certifications and organizations that have endorsed the XLERATOR hand dryer as meeting sustainability standards. It lists several LEED credits the hand dryer can help facilities obtain and notes the hand dryer is GreenSpec listed, endorsed by the Green Restaurant Association and Green Hotels Association, and listed in the Oikos Product Directory. The Green Building Initiative is also mentioned as an organization Excel Dryer supports.
Hygiene studies
Several studies have found that warm air hand dryers are more hygienic than other drying methods like paper towels. They reduce bacteria and viruses on hands more effectively due to the warm air penetrating crevices and dehydrating the skin faster. While one study funded by paper towel makers found otherwise, it had flawed methodology and was not peer reviewed. Most medical research has concluded that warm air dryers do not spread more bacteria in the air and may reduce it compared to other surfaces in washrooms.
Niles Township Case Study
Niles Township School District 219 in Illinois was facing budget cuts and looking for ways to reduce costs. They installed Excel XLERATOR hand dryers in the school restrooms to replace paper towels and traditional hand dryers. This saved the district over $16,500 per year in reduced maintenance costs and $12,500 in paper towel costs. The dryers also used less energy, saving $4,160 per year. The dryers paid for themselves within two years and helped teach students the importance of reducing waste and conserving energy.
Publictoilet
The document provides an overview of a development project focused on improving the public perception of public restrooms. It discusses common nuisances faced by users, such as a lack of privacy and cleanliness. Research included visits to local restrooms and interviews with users. Analysis found users were uncomfortable with shared and dirty spaces. The concept presented is a modular restroom system centered around a self-cleaning toilet pod called an "Escape Pod." The pod aims to provide privacy, cleanliness and sustainability through features like a steam-cleaned seat, integrated hand dryer and water recycling. A prototype was built to demonstrate the concept. Further business development is discussed to commercialize the improved public restroom experience.
New industry-standard
The document summarizes Excel Dryer's XLERATOR hand dryer. Key points:
- The XLERATOR dries hands 3 times faster than conventional dryers, in 10-15 seconds, using 80% less energy.
- It has received numerous awards and designations, including being the first hand dryer approved by GreenSpec and to help qualify for LEED credits.
- An analysis shows the XLERATOR outperforms paper towels on energy use and other environmental impacts.
Cost Savings Analysis Dynamic
This document provides a template for calculating and comparing the annual costs of using paper towels versus electric hand dryers. It outlines how to calculate the annual costs for paper towels based on factors like the number of cases used per year and cost per case. It then provides fields to calculate the annual electricity costs for operating hand dryers based on electricity rate, dryer wattage, and estimated number of dryer uses per year. The template also includes calculations for determining the annual savings from switching to dryers and the payback period in months for the upfront purchase and installation costs of the dryers.
Building Services Management Blowing Hot Air
Hand dryers have received criticism due to outdated studies and myths, but modern hand dryers address these issues and provide environmental and cost benefits over paper towels. Specifically, older studies claiming hand dryers spread bacteria have been debunked, modern hands-free dryers are more hygienic than surfaces like sinks. Additionally, the upfront and operating costs of hand dryers are lower than paper towels when factors like maintenance and waste are considered. Hand dryers also install and operate with minimal maintenance compared to paper towel dispensers.
Buildings Editors-Choice
The XLERATOR hand dryer from Excel Dryer was selected by the editors of Buildings magazine as an "Editors' Choice" product. The XLERATOR dries hands completely in 10-15 seconds using 80% less energy than conventional dryers. It provides significant cost savings over paper towels and improves restroom hygiene while requiring little maintenance. In testing, the editors found the XLERATOR to be highly effective at drying hands quickly, environmentally friendly in its energy use and elimination of paper towel waste, and durable with no moving parts requiring contact.
Architectural Products-USGBC
The USGBC built new LEED Gold and Platinum rated headquarters in Washington D.C. to practice green building principles. They installed high-speed, energy efficient Xlerator hand dryers donated by Excel Dryer that use 80% less energy than conventional dryers. The Xlerator helps the building qualify for LEED credits and sets a new standard for hand dryers. It allows the USGBC to showcase green building details that reduce water and resource use while maintaining aesthetics and functionality.
Patriots Case Study 2009
The document discusses the environmental sustainability efforts at Gillette Stadium, home of the New England Patriots. Some key initiatives included installing energy efficient lighting, reusing wastewater for toilets, and reusing over 90% of construction waste on site. The stadium also installed solar panels generating 30% of power for an adjacent complex. To further reduce costs and carbon footprint, the stadium replaced over 125 paper towel dispensers with high-speed XLERATOR hand dryers, saving 95% versus paper towel costs.
20240605 QFM017 Machine Intelligence Reading List May 2024
Everything I found interesting about machines behaving intelligently during May 2024
How to Get CNIC Information System with Paksim Ga.pptx
Pakdata Cf is a groundbreaking system designed to streamline and facilitate access to CNIC information. This innovative platform leverages advanced technology to provide users with efficient and secure access to their CNIC details.
Programming Foundation Models with DSPy - Meetup Slides
Prompting language models is hard, while programming language models is easy. In this talk, I will discuss the state-of-the-art framework DSPy for programming foundation models with its powerful optimizers and runtime constraint system.
Full-RAG: A modern architecture for hyper-personalization
Mike Del Balso, CEO & Co-Founder at Tecton, presents "Full RAG," a novel approach to AI recommendation systems, aiming to push beyond the limitations of traditional models through a deep integration of contextual insights and real-time data, leveraging the Retrieval-Augmented Generation architecture. This talk will outline Full RAG's potential to significantly enhance personalization, address engineering challenges such as data management and model training, and introduce data enrichment with reranking as a key solution. Attendees will gain crucial insights into the importance of hyperpersonalization in AI, the capabilities of Full RAG for advanced personalization, and strategies for managing complex data integrations for deploying cutting-edge AI solutions.
Observability Concepts EVERY Developer Should Know -- DeveloperWeek Europe.pdf
Monitoring and observability aren’t traditionally found in software curriculums and many of us cobble this knowledge together from whatever vendor or ecosystem we were first introduced to and whatever is a part of your current company’s observability stack.
While the dev and ops silo continues to crumble….many organizations still relegate monitoring & observability as the purview of ops, infra and SRE teams. This is a mistake - achieving a highly observable system requires collaboration up and down the stack.
I, a former op, would like to extend an invitation to all application developers to join the observability party will share these foundational concepts to build on:
20240609 QFM020 Irresponsible AI Reading List May 2024
Everything I found interesting about the irresponsible use of machine intelligence in May 2024
Pushing the limits of ePRTC: 100ns holdover for 100 days
At WSTS 2024, Alon Stern explored the topic of parametric holdover and explained how recent research findings can be implemented in real-world PNT networks to achieve 100 nanoseconds of accuracy for up to 100 days.
20240607 QFM018 Elixir Reading List May 2024
Everything I found interesting about the Elixir programming ecosystem in May 2024
Uni Systems Copilot event_05062024_C.Vlachos.pdf
Unlocking Productivity: Leveraging the Potential of Copilot in Microsoft 365, a presentation by Christoforos Vlachos, Senior Solutions Manager – Modern Workplace, Uni Systems
Cosa hanno in comune un mattoncino Lego e la backdoor XZ?
ABSTRACT: A prima vista, un mattoncino Lego e la backdoor XZ potrebbero avere in comune il fatto di essere entrambi blocchi di costruzione, o dipendenze di progetti creativi e software. La realtà è che un mattoncino Lego e il caso della backdoor XZ hanno molto di più di tutto ciò in comune.
Partecipate alla presentazione per immergervi in una storia di interoperabilità, standard e formati aperti, per poi discutere del ruolo importante che i contributori hanno in una comunità open source sostenibile.
BIO: Sostenitrice del software libero e dei formati standard e aperti. È stata un membro attivo dei progetti Fedora e openSUSE e ha co-fondato l'Associazione LibreItalia dove è stata coinvolta in diversi eventi, migrazioni e formazione relativi a LibreOffice. In precedenza ha lavorato a migrazioni e corsi di formazione su LibreOffice per diverse amministrazioni pubbliche e privati. Da gennaio 2020 lavora in SUSE come Software Release Engineer per Uyuni e SUSE Manager e quando non segue la sua passione per i computer e per Geeko coltiva la sua curiosità per l'astronomia (da cui deriva il suo nickname deneb_alpha).
HCL Notes und Domino Lizenzkostenreduzierung in der Welt von DLAU
Webinar Recording: https://www.panagenda.com/webinars/hcl-notes-und-domino-lizenzkostenreduzierung-in-der-welt-von-dlau/
DLAU und die Lizenzen nach dem CCB- und CCX-Modell sind für viele in der HCL-Community seit letztem Jahr ein heißes Thema. Als Notes- oder Domino-Kunde haben Sie vielleicht mit unerwartet hohen Benutzerzahlen und Lizenzgebühren zu kämpfen. Sie fragen sich vielleicht, wie diese neue Art der Lizenzierung funktioniert und welchen Nutzen sie Ihnen bringt. Vor allem wollen Sie sicherlich Ihr Budget einhalten und Kosten sparen, wo immer möglich. Das verstehen wir und wir möchten Ihnen dabei helfen!
Wir erklären Ihnen, wie Sie häufige Konfigurationsprobleme lösen können, die dazu führen können, dass mehr Benutzer gezählt werden als nötig, und wie Sie überflüssige oder ungenutzte Konten identifizieren und entfernen können, um Geld zu sparen. Es gibt auch einige Ansätze, die zu unnötigen Ausgaben führen können, z. B. wenn ein Personendokument anstelle eines Mail-Ins für geteilte Mailboxen verwendet wird. Wir zeigen Ihnen solche Fälle und deren Lösungen. Und natürlich erklären wir Ihnen das neue Lizenzmodell.
Nehmen Sie an diesem Webinar teil, bei dem HCL-Ambassador Marc Thomas und Gastredner Franz Walder Ihnen diese neue Welt näherbringen. Es vermittelt Ihnen die Tools und das Know-how, um den Überblick zu bewahren. Sie werden in der Lage sein, Ihre Kosten durch eine optimierte Domino-Konfiguration zu reduzieren und auch in Zukunft gering zu halten.
Diese Themen werden behandelt
- Reduzierung der Lizenzkosten durch Auffinden und Beheben von Fehlkonfigurationen und überflüssigen Konten
- Wie funktionieren CCB- und CCX-Lizenzen wirklich?
- Verstehen des DLAU-Tools und wie man es am besten nutzt
- Tipps für häufige Problembereiche, wie z. B. Team-Postfächer, Funktions-/Testbenutzer usw.
- Praxisbeispiele und Best Practices zum sofortigen Umsetzen
“Building and Scaling AI Applications with the Nx AI Manager,” a Presentation...
“Building and Scaling AI Applications with the Nx AI Manager,” a Presentation...Edge AI and Vision Alliance
For the full video of this presentation, please visit: https://www.edge-ai-vision.com/2024/06/building-and-scaling-ai-applications-with-the-nx-ai-manager-a-presentation-from-network-optix/
Robin van Emden, Senior Director of Data Science at Network Optix, presents the “Building and Scaling AI Applications with the Nx AI Manager,” tutorial at the May 2024 Embedded Vision Summit.
In this presentation, van Emden covers the basics of scaling edge AI solutions using the Nx tool kit. He emphasizes the process of developing AI models and deploying them globally. He also showcases the conversion of AI models and the creation of effective edge AI pipelines, with a focus on pre-processing, model conversion, selecting the appropriate inference engine for the target hardware and post-processing.
van Emden shows how Nx can simplify the developer’s life and facilitate a rapid transition from concept to production-ready applications.He provides valuable insights into developing scalable and efficient edge AI solutions, with a strong focus on practical implementation.Mind map of terminologies used in context of Generative AI
Mind map of common terms used in context of Generative AI.
More Related Content
More from Excel Hand Dryer
Cost Savings Analysis Dynamic
This document provides a template for calculating and comparing the annual costs of using paper towels versus electric hand dryers. It outlines how to calculate the annual costs for paper towels based on factors like the number of cases used per year and cost per case. It then provides fields to calculate the annual electricity costs for operating hand dryers based on electricity rate, dryer wattage, and estimated number of dryer uses per year. The template also includes calculations for determining the annual savings from switching to dryers and the payback period in months for the upfront purchase and installation costs of the dryers.
Building Services Management Blowing Hot Air
Hand dryers have received criticism due to outdated studies and myths, but modern hand dryers address these issues and provide environmental and cost benefits over paper towels. Specifically, older studies claiming hand dryers spread bacteria have been debunked, modern hands-free dryers are more hygienic than surfaces like sinks. Additionally, the upfront and operating costs of hand dryers are lower than paper towels when factors like maintenance and waste are considered. Hand dryers also install and operate with minimal maintenance compared to paper towel dispensers.
Buildings Editors-Choice
The XLERATOR hand dryer from Excel Dryer was selected by the editors of Buildings magazine as an "Editors' Choice" product. The XLERATOR dries hands completely in 10-15 seconds using 80% less energy than conventional dryers. It provides significant cost savings over paper towels and improves restroom hygiene while requiring little maintenance. In testing, the editors found the XLERATOR to be highly effective at drying hands quickly, environmentally friendly in its energy use and elimination of paper towel waste, and durable with no moving parts requiring contact.
Architectural Products-USGBC
The USGBC built new LEED Gold and Platinum rated headquarters in Washington D.C. to practice green building principles. They installed high-speed, energy efficient Xlerator hand dryers donated by Excel Dryer that use 80% less energy than conventional dryers. The Xlerator helps the building qualify for LEED credits and sets a new standard for hand dryers. It allows the USGBC to showcase green building details that reduce water and resource use while maintaining aesthetics and functionality.
Patriots Case Study 2009
The document discusses the environmental sustainability efforts at Gillette Stadium, home of the New England Patriots. Some key initiatives included installing energy efficient lighting, reusing wastewater for toilets, and reusing over 90% of construction waste on site. The stadium also installed solar panels generating 30% of power for an adjacent complex. To further reduce costs and carbon footprint, the stadium replaced over 125 paper towel dispensers with high-speed XLERATOR hand dryers, saving 95% versus paper towel costs.
More from Excel Hand Dryer (7)
Recently uploaded
20240605 QFM017 Machine Intelligence Reading List May 2024
Everything I found interesting about machines behaving intelligently during May 2024
How to Get CNIC Information System with Paksim Ga.pptx
Pakdata Cf is a groundbreaking system designed to streamline and facilitate access to CNIC information. This innovative platform leverages advanced technology to provide users with efficient and secure access to their CNIC details.
Programming Foundation Models with DSPy - Meetup Slides
Prompting language models is hard, while programming language models is easy. In this talk, I will discuss the state-of-the-art framework DSPy for programming foundation models with its powerful optimizers and runtime constraint system.
Full-RAG: A modern architecture for hyper-personalization
Mike Del Balso, CEO & Co-Founder at Tecton, presents "Full RAG," a novel approach to AI recommendation systems, aiming to push beyond the limitations of traditional models through a deep integration of contextual insights and real-time data, leveraging the Retrieval-Augmented Generation architecture. This talk will outline Full RAG's potential to significantly enhance personalization, address engineering challenges such as data management and model training, and introduce data enrichment with reranking as a key solution. Attendees will gain crucial insights into the importance of hyperpersonalization in AI, the capabilities of Full RAG for advanced personalization, and strategies for managing complex data integrations for deploying cutting-edge AI solutions.
Observability Concepts EVERY Developer Should Know -- DeveloperWeek Europe.pdf
Monitoring and observability aren’t traditionally found in software curriculums and many of us cobble this knowledge together from whatever vendor or ecosystem we were first introduced to and whatever is a part of your current company’s observability stack.
While the dev and ops silo continues to crumble….many organizations still relegate monitoring & observability as the purview of ops, infra and SRE teams. This is a mistake - achieving a highly observable system requires collaboration up and down the stack.
I, a former op, would like to extend an invitation to all application developers to join the observability party will share these foundational concepts to build on:
20240609 QFM020 Irresponsible AI Reading List May 2024
Everything I found interesting about the irresponsible use of machine intelligence in May 2024
Pushing the limits of ePRTC: 100ns holdover for 100 days
At WSTS 2024, Alon Stern explored the topic of parametric holdover and explained how recent research findings can be implemented in real-world PNT networks to achieve 100 nanoseconds of accuracy for up to 100 days.
20240607 QFM018 Elixir Reading List May 2024
Everything I found interesting about the Elixir programming ecosystem in May 2024
Uni Systems Copilot event_05062024_C.Vlachos.pdf
Unlocking Productivity: Leveraging the Potential of Copilot in Microsoft 365, a presentation by Christoforos Vlachos, Senior Solutions Manager – Modern Workplace, Uni Systems
Cosa hanno in comune un mattoncino Lego e la backdoor XZ?
ABSTRACT: A prima vista, un mattoncino Lego e la backdoor XZ potrebbero avere in comune il fatto di essere entrambi blocchi di costruzione, o dipendenze di progetti creativi e software. La realtà è che un mattoncino Lego e il caso della backdoor XZ hanno molto di più di tutto ciò in comune.
Partecipate alla presentazione per immergervi in una storia di interoperabilità, standard e formati aperti, per poi discutere del ruolo importante che i contributori hanno in una comunità open source sostenibile.
BIO: Sostenitrice del software libero e dei formati standard e aperti. È stata un membro attivo dei progetti Fedora e openSUSE e ha co-fondato l'Associazione LibreItalia dove è stata coinvolta in diversi eventi, migrazioni e formazione relativi a LibreOffice. In precedenza ha lavorato a migrazioni e corsi di formazione su LibreOffice per diverse amministrazioni pubbliche e privati. Da gennaio 2020 lavora in SUSE come Software Release Engineer per Uyuni e SUSE Manager e quando non segue la sua passione per i computer e per Geeko coltiva la sua curiosità per l'astronomia (da cui deriva il suo nickname deneb_alpha).
HCL Notes und Domino Lizenzkostenreduzierung in der Welt von DLAU
Webinar Recording: https://www.panagenda.com/webinars/hcl-notes-und-domino-lizenzkostenreduzierung-in-der-welt-von-dlau/
DLAU und die Lizenzen nach dem CCB- und CCX-Modell sind für viele in der HCL-Community seit letztem Jahr ein heißes Thema. Als Notes- oder Domino-Kunde haben Sie vielleicht mit unerwartet hohen Benutzerzahlen und Lizenzgebühren zu kämpfen. Sie fragen sich vielleicht, wie diese neue Art der Lizenzierung funktioniert und welchen Nutzen sie Ihnen bringt. Vor allem wollen Sie sicherlich Ihr Budget einhalten und Kosten sparen, wo immer möglich. Das verstehen wir und wir möchten Ihnen dabei helfen!
Wir erklären Ihnen, wie Sie häufige Konfigurationsprobleme lösen können, die dazu führen können, dass mehr Benutzer gezählt werden als nötig, und wie Sie überflüssige oder ungenutzte Konten identifizieren und entfernen können, um Geld zu sparen. Es gibt auch einige Ansätze, die zu unnötigen Ausgaben führen können, z. B. wenn ein Personendokument anstelle eines Mail-Ins für geteilte Mailboxen verwendet wird. Wir zeigen Ihnen solche Fälle und deren Lösungen. Und natürlich erklären wir Ihnen das neue Lizenzmodell.
Nehmen Sie an diesem Webinar teil, bei dem HCL-Ambassador Marc Thomas und Gastredner Franz Walder Ihnen diese neue Welt näherbringen. Es vermittelt Ihnen die Tools und das Know-how, um den Überblick zu bewahren. Sie werden in der Lage sein, Ihre Kosten durch eine optimierte Domino-Konfiguration zu reduzieren und auch in Zukunft gering zu halten.
Diese Themen werden behandelt
- Reduzierung der Lizenzkosten durch Auffinden und Beheben von Fehlkonfigurationen und überflüssigen Konten
- Wie funktionieren CCB- und CCX-Lizenzen wirklich?
- Verstehen des DLAU-Tools und wie man es am besten nutzt
- Tipps für häufige Problembereiche, wie z. B. Team-Postfächer, Funktions-/Testbenutzer usw.
- Praxisbeispiele und Best Practices zum sofortigen Umsetzen
“Building and Scaling AI Applications with the Nx AI Manager,” a Presentation...
“Building and Scaling AI Applications with the Nx AI Manager,” a Presentation...Edge AI and Vision Alliance
For the full video of this presentation, please visit: https://www.edge-ai-vision.com/2024/06/building-and-scaling-ai-applications-with-the-nx-ai-manager-a-presentation-from-network-optix/
Robin van Emden, Senior Director of Data Science at Network Optix, presents the “Building and Scaling AI Applications with the Nx AI Manager,” tutorial at the May 2024 Embedded Vision Summit.
In this presentation, van Emden covers the basics of scaling edge AI solutions using the Nx tool kit. He emphasizes the process of developing AI models and deploying them globally. He also showcases the conversion of AI models and the creation of effective edge AI pipelines, with a focus on pre-processing, model conversion, selecting the appropriate inference engine for the target hardware and post-processing.
van Emden shows how Nx can simplify the developer’s life and facilitate a rapid transition from concept to production-ready applications.He provides valuable insights into developing scalable and efficient edge AI solutions, with a strong focus on practical implementation.Mind map of terminologies used in context of Generative AI
Mind map of common terms used in context of Generative AI.
GraphSummit Singapore | The Future of Agility: Supercharging Digital Transfor...
Leonard Jayamohan, Partner & Generative AI Lead, Deloitte
This keynote will reveal how Deloitte leverages Neo4j’s graph power for groundbreaking digital twin solutions, achieving a staggering 100x performance boost. Discover the essential role knowledge graphs play in successful generative AI implementations. Plus, get an exclusive look at an innovative Neo4j + Generative AI solution Deloitte is developing in-house.
HCL Notes and Domino License Cost Reduction in the World of DLAU
Webinar Recording: https://www.panagenda.com/webinars/hcl-notes-and-domino-license-cost-reduction-in-the-world-of-dlau/
The introduction of DLAU and the CCB & CCX licensing model caused quite a stir in the HCL community. As a Notes and Domino customer, you may have faced challenges with unexpected user counts and license costs. You probably have questions on how this new licensing approach works and how to benefit from it. Most importantly, you likely have budget constraints and want to save money where possible. Don’t worry, we can help with all of this!
We’ll show you how to fix common misconfigurations that cause higher-than-expected user counts, and how to identify accounts which you can deactivate to save money. There are also frequent patterns that can cause unnecessary cost, like using a person document instead of a mail-in for shared mailboxes. We’ll provide examples and solutions for those as well. And naturally we’ll explain the new licensing model.
Join HCL Ambassador Marc Thomas in this webinar with a special guest appearance from Franz Walder. It will give you the tools and know-how to stay on top of what is going on with Domino licensing. You will be able lower your cost through an optimized configuration and keep it low going forward.
These topics will be covered
- Reducing license cost by finding and fixing misconfigurations and superfluous accounts
- How do CCB and CCX licenses really work?
- Understanding the DLAU tool and how to best utilize it
- Tips for common problem areas, like team mailboxes, functional/test users, etc
- Practical examples and best practices to implement right away
GraphSummit Singapore | The Art of the Possible with Graph - Q2 2024
Neha Bajwa, Vice President of Product Marketing, Neo4j
Join us as we explore breakthrough innovations enabled by interconnected data and AI. Discover firsthand how organizations use relationships in data to uncover contextual insights and solve our most pressing challenges – from optimizing supply chains, detecting fraud, and improving customer experiences to accelerating drug discoveries.
Let's Integrate MuleSoft RPA, COMPOSER, APM with AWS IDP along with Slack
Discover the seamless integration of RPA (Robotic Process Automation), COMPOSER, and APM with AWS IDP enhanced with Slack notifications. Explore how these technologies converge to streamline workflows, optimize performance, and ensure secure access, all while leveraging the power of AWS IDP and real-time communication via Slack notifications.
Removing Uninteresting Bytes in Software Fuzzing
Imagine a world where software fuzzing, the process of mutating bytes in test seeds to uncover hidden and erroneous program behaviors, becomes faster and more effective. A lot depends on the initial seeds, which can significantly dictate the trajectory of a fuzzing campaign, particularly in terms of how long it takes to uncover interesting behaviour in your code. We introduce DIAR, a technique designed to speedup fuzzing campaigns by pinpointing and eliminating those uninteresting bytes in the seeds. Picture this: instead of wasting valuable resources on meaningless mutations in large, bloated seeds, DIAR removes the unnecessary bytes, streamlining the entire process.
In this work, we equipped AFL, a popular fuzzer, with DIAR and examined two critical Linux libraries -- Libxml's xmllint, a tool for parsing xml documents, and Binutil's readelf, an essential debugging and security analysis command-line tool used to display detailed information about ELF (Executable and Linkable Format). Our preliminary results show that AFL+DIAR does not only discover new paths more quickly but also achieves higher coverage overall. This work thus showcases how starting with lean and optimized seeds can lead to faster, more comprehensive fuzzing campaigns -- and DIAR helps you find such seeds.
- These are slides of the talk given at IEEE International Conference on Software Testing Verification and Validation Workshop, ICSTW 2022.
Recently uploaded (20)
20240605 QFM017 Machine Intelligence Reading List May 2024
20240605 QFM017 Machine Intelligence Reading List May 2024
How to Get CNIC Information System with Paksim Ga.pptx
How to Get CNIC Information System with Paksim Ga.pptx
Programming Foundation Models with DSPy - Meetup Slides
Programming Foundation Models with DSPy - Meetup Slides
Full-RAG: A modern architecture for hyper-personalization
Full-RAG: A modern architecture for hyper-personalization
Observability Concepts EVERY Developer Should Know -- DeveloperWeek Europe.pdf
Observability Concepts EVERY Developer Should Know -- DeveloperWeek Europe.pdf
20240609 QFM020 Irresponsible AI Reading List May 2024
20240609 QFM020 Irresponsible AI Reading List May 2024
Pushing the limits of ePRTC: 100ns holdover for 100 days
Pushing the limits of ePRTC: 100ns holdover for 100 days
Cosa hanno in comune un mattoncino Lego e la backdoor XZ?
Cosa hanno in comune un mattoncino Lego e la backdoor XZ?
HCL Notes und Domino Lizenzkostenreduzierung in der Welt von DLAU
HCL Notes und Domino Lizenzkostenreduzierung in der Welt von DLAU
“Building and Scaling AI Applications with the Nx AI Manager,” a Presentation...
“Building and Scaling AI Applications with the Nx AI Manager,” a Presentation...
Mind map of terminologies used in context of Generative AI
Mind map of terminologies used in context of Generative AI
GraphSummit Singapore | The Future of Agility: Supercharging Digital Transfor...
GraphSummit Singapore | The Future of Agility: Supercharging Digital Transfor...
HCL Notes and Domino License Cost Reduction in the World of DLAU
HCL Notes and Domino License Cost Reduction in the World of DLAU
GraphSummit Singapore | The Art of the Possible with Graph - Q2 2024
GraphSummit Singapore | The Art of the Possible with Graph - Q2 2024
Let's Integrate MuleSoft RPA, COMPOSER, APM with AWS IDP along with Slack
Let's Integrate MuleSoft RPA, COMPOSER, APM with AWS IDP along with Slack