The document provides information on a Deutz D6D EBE2 engine, including:
- The engine is a 6-cylinder 4-stroke direct injected turbocharged aftercooled diesel.
- It has a cast iron block and head with hardened helical gears and passages for oil and coolant.
- Drawings and descriptions are given of the engine components and systems like the cylinder head, pistons, valves, crankshaft, and connecting rods.
Volvo EC180B LC EC180BLC Excavator Service Repair Manual Instant Download.pdftepu22753653
The document provides information on an engine including:
- The engine is a 6-cylinder, 4-stroke diesel engine with cast iron block and head.
- Gears in the engine case are hardened helical type for strength and reduced noise.
- The document includes diagrams of the engine starter side view, alternator side view, top view and flywheel end view labeling parts.
Volvo EC180B LC EC180BLC Excavator Service Repair Manual Instant Download.pdfdai20nao
The document provides information on an engine including:
- The engine is a 6-cylinder, 4-stroke diesel engine with cast iron block and head.
- Gears in the engine case are hardened helical type for strength and reduced noise.
- The document includes diagrams of the engine starter side view, alternator side view, top view and flywheel end view labeling parts.
Volvo EC180B LC EC180BLC Excavator Service Repair Manual Instant Download.pdfrou774513po
The document provides information on an engine including:
- The engine is a 6-cylinder, 4-stroke diesel engine with cast iron block and head.
- Gears in the engine case are hardened helical type for strength and reduced noise.
- The document includes diagrams of the engine starter side view, alternator side view, top view and flywheel end view labeling parts.
Volvo EC180B LC EC180BLC Excavator Service Repair Manual Instant Download.pdfzhenchun51
The document provides information on an engine including:
- The engine is a 6-cylinder, 4-stroke diesel engine with cast iron block and head.
- Gears in the engine case are hardened helical type for strength and reduced noise.
- The document includes diagrams of the engine starter side, alternator side, top view and flywheel end.
Volvo EC180B LC EC180BLC Excavator Service Repair Manual Instant Download.pdff8iosedkdm3e
The document provides information on an engine including:
- The engine is a 6-cylinder, 4-stroke diesel engine with cast iron block and head.
- Gears in the engine case are hardened helical type for strength and reduced noise.
- The document includes diagrams of the engine starter side, alternator side, top view and flywheel end.
Volvo EC180B LC EC180BLC Excavator Service Repair Manual Instant Download.pdfzu0582kui
The document provides information on an engine including:
- The engine is a 6-cylinder, 4-stroke diesel engine with cast iron block and head.
- Gears in the engine case are hardened helical type for strength and reduced noise.
- The document includes diagrams of the engine starter side, alternator side, top view and flywheel end.
Volvo EC180B LC EC180BLC Excavator Service Repair Manual Instant Download.pdffijsekkkdmdm3e
The document provides information on an engine including:
- The engine is a 6-cylinder, 4-stroke diesel engine with cast iron block and head.
- Gears in the engine case are hardened helical type for strength and reduced noise.
- The document includes diagrams of the engine starter side, alternator side, top view and flywheel end.
Volvo EC180B LC EC180BLC Excavator Service Repair Manual Instant Download.pdflunrizan628
The document provides information on an engine including:
- The engine is a 6-cylinder, 4-stroke diesel engine with cast iron block and head.
- Gears in the engine case are hardened helical type for strength and reduced noise.
- The document includes diagrams of the engine starter side view, alternator side view, top view and flywheel end view labeling parts.
Volvo EC180B LC EC180BLC Excavator Service Repair Manual Instant Download.pdftepu22753653
The document provides information on an engine including:
- The engine is a 6-cylinder, 4-stroke diesel engine with cast iron block and head.
- Gears in the engine case are hardened helical type for strength and reduced noise.
- The document includes diagrams of the engine starter side view, alternator side view, top view and flywheel end view labeling parts.
Volvo EC180B LC EC180BLC Excavator Service Repair Manual Instant Download.pdfdai20nao
The document provides information on an engine including:
- The engine is a 6-cylinder, 4-stroke diesel engine with cast iron block and head.
- Gears in the engine case are hardened helical type for strength and reduced noise.
- The document includes diagrams of the engine starter side view, alternator side view, top view and flywheel end view labeling parts.
Volvo EC180B LC EC180BLC Excavator Service Repair Manual Instant Download.pdfrou774513po
The document provides information on an engine including:
- The engine is a 6-cylinder, 4-stroke diesel engine with cast iron block and head.
- Gears in the engine case are hardened helical type for strength and reduced noise.
- The document includes diagrams of the engine starter side view, alternator side view, top view and flywheel end view labeling parts.
Volvo EC180B LC EC180BLC Excavator Service Repair Manual Instant Download.pdfzhenchun51
The document provides information on an engine including:
- The engine is a 6-cylinder, 4-stroke diesel engine with cast iron block and head.
- Gears in the engine case are hardened helical type for strength and reduced noise.
- The document includes diagrams of the engine starter side, alternator side, top view and flywheel end.
Volvo EC180B LC EC180BLC Excavator Service Repair Manual Instant Download.pdff8iosedkdm3e
The document provides information on an engine including:
- The engine is a 6-cylinder, 4-stroke diesel engine with cast iron block and head.
- Gears in the engine case are hardened helical type for strength and reduced noise.
- The document includes diagrams of the engine starter side, alternator side, top view and flywheel end.
Volvo EC180B LC EC180BLC Excavator Service Repair Manual Instant Download.pdfzu0582kui
The document provides information on an engine including:
- The engine is a 6-cylinder, 4-stroke diesel engine with cast iron block and head.
- Gears in the engine case are hardened helical type for strength and reduced noise.
- The document includes diagrams of the engine starter side, alternator side, top view and flywheel end.
Volvo EC180B LC EC180BLC Excavator Service Repair Manual Instant Download.pdffijsekkkdmdm3e
The document provides information on an engine including:
- The engine is a 6-cylinder, 4-stroke diesel engine with cast iron block and head.
- Gears in the engine case are hardened helical type for strength and reduced noise.
- The document includes diagrams of the engine starter side, alternator side, top view and flywheel end.
Volvo EC180B LC EC180BLC Excavator Service Repair Manual Instant Download.pdflunrizan628
The document provides information on an engine including:
- The engine is a 6-cylinder, 4-stroke diesel engine with cast iron block and head.
- Gears in the engine case are hardened helical type for strength and reduced noise.
- The document includes diagrams of the engine starter side view, alternator side view, top view and flywheel end view labeling parts.
Volvo EC180B LC EC180BLC Excavator Service Repair Manual Instant Download.pdfnie7140zhuang
The document provides information on an engine including:
- The engine is a 6-cylinder, 4-stroke diesel engine with cast iron block and head.
- Gears in the engine case are hardened helical type for strength and reduced noise.
- The document includes diagrams of the engine starter side, alternator side, top view and flywheel end.
Volvo EC180B LC EC180BLC Excavator Service Repair Manual Instant Download.pdffapanhe306271
The document provides information on an engine including:
- The engine is a 6-cylinder, 4-stroke diesel engine with cast iron block and head.
- Gears in the engine case are hardened helical type for strength and reduced noise.
- The document includes diagrams of the engine starter side view, alternator side view, top view and flywheel end view labeling parts.
Volvo EC140B LC EC140BLC Excavator Service Repair Manual Instant Download.pdfdai20nao
The document provides information on an engine, including:
- It is a 4-cylinder, 4-stroke engine with a cast iron block and head.
- Gears in the engine gear case are hardened helical type for quiet power transmission.
- The document includes diagrams of the engine layout and specifications for maintenance procedures like valve clearance adjustment.
Volvo EC140B LC EC140BLC Excavator Service Repair Manual Instant Download.pdftepu22753653
The document provides information on an engine, including:
- It is a 4-cylinder, 4-stroke engine with a cast iron block and cylinder head.
- Gears in the engine gear case are hardened helical type for quiet power transmission.
- The document includes diagrams of the engine layout and specifications for maintenance procedures like valve clearance adjustment.
Volvo EC140B LC EC140BLC Excavator Service Repair Manual Instant Download.pdfrou774513po
The document provides information on an engine, including:
- It is a 4-cylinder, 4-stroke engine with a cast iron block and cylinder head.
- Gears in the engine gear case are hardened helical type for quiet power transmission.
- The document contains diagrams of the engine showing components like the intake and exhaust manifolds.
Volvo EC140B LC EC140BLC Excavator Service Repair Manual Instant Download.pdfzhenchun51
The document provides information on an engine, including:
- It is a 4-cylinder, 4-stroke engine with a cast iron block and cylinder head.
- Gears in the engine gear case are hardened helical type for quiet power transmission.
- The document includes diagrams of the engine layout and specifications for maintenance procedures like valve clearance adjustment.
Volvo EC140B LC EC140BLC Excavator Service Repair Manual Instant Download.pdff8iosedkdm3e
The document provides information on an engine, including:
- It is a 4-cylinder, 4-stroke engine with a cast iron block and head.
- Gears in the engine gear case are hardened helical type for quiet power transmission.
- The document includes diagrams of the engine layout and components as well as specifications for maintenance like valve clearance adjustment.
Volvo EC140B LC EC140BLC Excavator Service Repair Manual Instant Download.pdfzu0582kui
The document provides information on an engine, including:
- It is a 4-cylinder, 4-stroke engine with a cast iron block and cylinder head.
- Gears in the engine gear case are hardened helical type for quiet power transmission.
- The document contains diagrams of the engine showing components like the intake and exhaust manifolds.
Volvo EC140B LC EC140BLC Excavator Service Repair Manual Instant Download.pdffijsekkkdmdm3e
The document provides information on an engine, including:
- It is a 4-cylinder, 4-stroke engine with a cast iron block and head.
- Gears in the engine gear case are hardened helical type for quiet power transmission.
- The document includes diagrams of the engine layout and specifications for maintenance procedures like valve clearance adjustment.
Volvo EC140B LC EC140BLC Excavator Service Repair Manual Instant Download.pdflunrizan628
The document provides information on an engine, including:
- It is a 4-cylinder, 4-stroke engine with a cast iron block and cylinder head.
- Gears in the engine gear case are hardened helical type for quiet power transmission.
- The document includes diagrams of the engine layout and specifications for maintenance procedures like valve clearance adjustment.
Volvo EC140B LC EC140BLC Excavator Service Repair Manual Instant Download.pdfnie7140zhuang
The document provides information on an engine, including:
- It is a 4-cylinder, 4-stroke engine with a cast iron block and cylinder head.
- Gears in the engine gear case are hardened helical type for quiet power transmission.
- The document contains diagrams of the engine showing components like the intake and exhaust manifolds.
Volvo EC140B LC EC140BLC Excavator Service Repair Manual Instant Download.pdffapanhe306271
The document provides information on an engine, including:
- It is a 4-cylinder, 4-stroke engine with a cast iron block and cylinder head.
- Gears in the engine gear case are hardened helical type for quiet power transmission.
- The document contains diagrams of the engine showing components like the intake and exhaust manifolds.
Volvo EC290B LC (EC290BLC) Excavator Service Repair Manual Instant Download.pdff8iosedkdm3e
This document provides descriptions of various engine components for a Volvo D7D engine, including:
- The cylinder head is made of grey cast iron with vertically entering induction air and horizontally exiting exhaust. It uses three different thickness cylinder head gaskets.
- The engine uses wet cylinder liners sealed with two O-rings and pressure from the cylinder head.
- The pistons are made of aluminum alloy with a combustion cavity, flywheel symbol, and cooled by oil spray from nozzles. They use two compression rings and one oil control ring.
- Piston rings include two compression rings, one with a cast iron carrier, and an oil ring with a beveled edge. They are installed with
Volvo EC290B LC (EC290BLC) Excavator Service Repair Manual Instant Download.pdffijsekkkdmdm3e
The document provides information on an engine, including:
1. The engine is a 6-cylinder, 4-stroke diesel engine with a cast iron block and head. It uses direct injection, turbocharging, and aftercooling.
2. The document includes diagrams and descriptions of the engine components such as the cylinder head, liners, pistons, rings, valves, and internal exhaust gas recirculation system.
3. The document provides information and diagrams related to performing basic checks, troubleshooting, and maintenance of the engine.
Volvo EC290B LC (EC290BLC) Excavator Service Repair Manual Instant Download.pdftepu22753653
The document provides information on an engine, including:
1. The engine is a 6-cylinder, 4-stroke diesel engine with a cast iron block and head. It uses direct injection, turbocharging, and aftercooling.
2. The document includes diagrams and descriptions of the engine components such as the cylinder head, liners, pistons, rings, valves, and internal exhaust gas recirculation system.
3. Troubleshooting information and procedures are also outlined, such as checking codes, parameters, and performing basic engine tests to diagnose issues.
Volvo EC290B LC (EC290BLC) Excavator Service Repair Manual Instant Download.pdfrou774513po
The document provides information on an engine, including:
1. The engine is a 6-cylinder, 4-stroke diesel engine with a cast iron block and head. It uses direct injection, turbocharging, and aftercooling.
2. The document includes diagrams and descriptions of the engine components such as the cylinder head, liners, pistons, rings, valves, and internal exhaust gas recirculation system.
3. Troubleshooting information is also provided, with steps like checking error codes, parameters, and performing basic engine tests to diagnose issues.
Volvo EC290B LC (EC290BLC) Excavator Service Repair Manual Instant Download.pdfzhenchun51
The document provides information on an engine, including:
1. The engine is a 6-cylinder, 4-stroke diesel engine with a cast iron block and head. It uses direct injection, turbocharging, and aftercooling.
2. The document includes diagrams and descriptions of the engine components, such as the cylinder head, liners, pistons, rings, valves, and internal exhaust gas recirculation system.
3. Troubleshooting information and procedures are also outlined, such as checking codes, parameters, and performing basic engine tests to diagnose issues.
Volvo EC290B LC (EC290BLC) Excavator Service Repair Manual Instant Download.pdfzu0582kui
The document provides information on an engine, including:
1. The engine is a 6-cylinder, 4-stroke diesel engine with a cast iron block and head. It uses direct injection, turbocharging, and aftercooling.
2. The document includes diagrams and descriptions of the engine components, such as the cylinder head, liners, pistons, rings, valves, and internal exhaust gas recirculation system.
3. Troubleshooting information and procedures are also outlined, such as checking codes, parameters, and performing basic engine tests to diagnose issues.
Volvo EC290B LC (EC290BLC) Excavator Service Repair Manual Instant Download.pdflunrizan628
The document provides information on an engine, including:
1. The engine is a 6-cylinder, 4-stroke diesel engine with a cast iron block and head. It uses direct injection, turbocharging, and air-to-air cooling.
2. The document includes descriptions of various engine components like the cylinder head, liners, pistons, rings, valves, and an internal exhaust gas recirculation system.
3. It also provides an engine characteristic curve showing power, torque, and fuel consumption curves. Basic checks, troubleshooting information, and service information are outlined.
Volvo EC290B LC (EC290BLC) Excavator Service Repair Manual Instant Download.pdfnie7140zhuang
The document provides information on an engine, including:
1. The engine is a 6-cylinder, 4-stroke diesel engine with a cast iron block and head. It uses direct injection, turbocharging, and air-to-air cooling.
2. The document includes diagrams and descriptions of the engine components, such as the cylinder head, liners, pistons, valves, and internal exhaust gas recirculation system.
3. Troubleshooting information and procedures are also outlined, such as checking codes, parameters, and performing basic engine tests to diagnose issues.
Volvo MW500 Wheeled Milling Equipment Service Repair Manual Instant Download.pdffapanhe306271
The document provides instructions for removing an engine from a machine. It is a Deutz TCD 2012 L04 2V four-cylinder diesel engine. The steps include draining fluids, disconnecting fuel lines, electrical connections, hydraulic hoses, and removing mounting bolts. Safety precautions are noted. The engine weighs approximately 950 kg and is removed using hoist points on the engine and a crossmember.
Volvo MC110B Skid Steer Loader Service Repair Manual Instant Download.pdffapanhe306271
The document provides information on removing an engine from a machine. It is a step-by-step process that includes draining fluids, disconnecting hoses and wiring, and removing mounting hardware. The engine is then lifted from the machine using an overhead hoist and placed on engine stands. Precautions are outlined to handle fluids safely and prevent damage to components during removal.
More Related Content
Similar to Volvo EC160B LC EC160BLC Excavator Service Repair Manual Instant Download.pdf
Volvo EC180B LC EC180BLC Excavator Service Repair Manual Instant Download.pdfnie7140zhuang
The document provides information on an engine including:
- The engine is a 6-cylinder, 4-stroke diesel engine with cast iron block and head.
- Gears in the engine case are hardened helical type for strength and reduced noise.
- The document includes diagrams of the engine starter side, alternator side, top view and flywheel end.
Volvo EC180B LC EC180BLC Excavator Service Repair Manual Instant Download.pdffapanhe306271
The document provides information on an engine including:
- The engine is a 6-cylinder, 4-stroke diesel engine with cast iron block and head.
- Gears in the engine case are hardened helical type for strength and reduced noise.
- The document includes diagrams of the engine starter side view, alternator side view, top view and flywheel end view labeling parts.
Volvo EC140B LC EC140BLC Excavator Service Repair Manual Instant Download.pdfdai20nao
The document provides information on an engine, including:
- It is a 4-cylinder, 4-stroke engine with a cast iron block and head.
- Gears in the engine gear case are hardened helical type for quiet power transmission.
- The document includes diagrams of the engine layout and specifications for maintenance procedures like valve clearance adjustment.
Volvo EC140B LC EC140BLC Excavator Service Repair Manual Instant Download.pdftepu22753653
The document provides information on an engine, including:
- It is a 4-cylinder, 4-stroke engine with a cast iron block and cylinder head.
- Gears in the engine gear case are hardened helical type for quiet power transmission.
- The document includes diagrams of the engine layout and specifications for maintenance procedures like valve clearance adjustment.
Volvo EC140B LC EC140BLC Excavator Service Repair Manual Instant Download.pdfrou774513po
The document provides information on an engine, including:
- It is a 4-cylinder, 4-stroke engine with a cast iron block and cylinder head.
- Gears in the engine gear case are hardened helical type for quiet power transmission.
- The document contains diagrams of the engine showing components like the intake and exhaust manifolds.
Volvo EC140B LC EC140BLC Excavator Service Repair Manual Instant Download.pdfzhenchun51
The document provides information on an engine, including:
- It is a 4-cylinder, 4-stroke engine with a cast iron block and cylinder head.
- Gears in the engine gear case are hardened helical type for quiet power transmission.
- The document includes diagrams of the engine layout and specifications for maintenance procedures like valve clearance adjustment.
Volvo EC140B LC EC140BLC Excavator Service Repair Manual Instant Download.pdff8iosedkdm3e
The document provides information on an engine, including:
- It is a 4-cylinder, 4-stroke engine with a cast iron block and head.
- Gears in the engine gear case are hardened helical type for quiet power transmission.
- The document includes diagrams of the engine layout and components as well as specifications for maintenance like valve clearance adjustment.
Volvo EC140B LC EC140BLC Excavator Service Repair Manual Instant Download.pdfzu0582kui
The document provides information on an engine, including:
- It is a 4-cylinder, 4-stroke engine with a cast iron block and cylinder head.
- Gears in the engine gear case are hardened helical type for quiet power transmission.
- The document contains diagrams of the engine showing components like the intake and exhaust manifolds.
Volvo EC140B LC EC140BLC Excavator Service Repair Manual Instant Download.pdffijsekkkdmdm3e
The document provides information on an engine, including:
- It is a 4-cylinder, 4-stroke engine with a cast iron block and head.
- Gears in the engine gear case are hardened helical type for quiet power transmission.
- The document includes diagrams of the engine layout and specifications for maintenance procedures like valve clearance adjustment.
Volvo EC140B LC EC140BLC Excavator Service Repair Manual Instant Download.pdflunrizan628
The document provides information on an engine, including:
- It is a 4-cylinder, 4-stroke engine with a cast iron block and cylinder head.
- Gears in the engine gear case are hardened helical type for quiet power transmission.
- The document includes diagrams of the engine layout and specifications for maintenance procedures like valve clearance adjustment.
Volvo EC140B LC EC140BLC Excavator Service Repair Manual Instant Download.pdfnie7140zhuang
The document provides information on an engine, including:
- It is a 4-cylinder, 4-stroke engine with a cast iron block and cylinder head.
- Gears in the engine gear case are hardened helical type for quiet power transmission.
- The document contains diagrams of the engine showing components like the intake and exhaust manifolds.
Volvo EC140B LC EC140BLC Excavator Service Repair Manual Instant Download.pdffapanhe306271
The document provides information on an engine, including:
- It is a 4-cylinder, 4-stroke engine with a cast iron block and cylinder head.
- Gears in the engine gear case are hardened helical type for quiet power transmission.
- The document contains diagrams of the engine showing components like the intake and exhaust manifolds.
Volvo EC290B LC (EC290BLC) Excavator Service Repair Manual Instant Download.pdff8iosedkdm3e
This document provides descriptions of various engine components for a Volvo D7D engine, including:
- The cylinder head is made of grey cast iron with vertically entering induction air and horizontally exiting exhaust. It uses three different thickness cylinder head gaskets.
- The engine uses wet cylinder liners sealed with two O-rings and pressure from the cylinder head.
- The pistons are made of aluminum alloy with a combustion cavity, flywheel symbol, and cooled by oil spray from nozzles. They use two compression rings and one oil control ring.
- Piston rings include two compression rings, one with a cast iron carrier, and an oil ring with a beveled edge. They are installed with
Volvo EC290B LC (EC290BLC) Excavator Service Repair Manual Instant Download.pdffijsekkkdmdm3e
The document provides information on an engine, including:
1. The engine is a 6-cylinder, 4-stroke diesel engine with a cast iron block and head. It uses direct injection, turbocharging, and aftercooling.
2. The document includes diagrams and descriptions of the engine components such as the cylinder head, liners, pistons, rings, valves, and internal exhaust gas recirculation system.
3. The document provides information and diagrams related to performing basic checks, troubleshooting, and maintenance of the engine.
Volvo EC290B LC (EC290BLC) Excavator Service Repair Manual Instant Download.pdftepu22753653
The document provides information on an engine, including:
1. The engine is a 6-cylinder, 4-stroke diesel engine with a cast iron block and head. It uses direct injection, turbocharging, and aftercooling.
2. The document includes diagrams and descriptions of the engine components such as the cylinder head, liners, pistons, rings, valves, and internal exhaust gas recirculation system.
3. Troubleshooting information and procedures are also outlined, such as checking codes, parameters, and performing basic engine tests to diagnose issues.
Volvo EC290B LC (EC290BLC) Excavator Service Repair Manual Instant Download.pdfrou774513po
The document provides information on an engine, including:
1. The engine is a 6-cylinder, 4-stroke diesel engine with a cast iron block and head. It uses direct injection, turbocharging, and aftercooling.
2. The document includes diagrams and descriptions of the engine components such as the cylinder head, liners, pistons, rings, valves, and internal exhaust gas recirculation system.
3. Troubleshooting information is also provided, with steps like checking error codes, parameters, and performing basic engine tests to diagnose issues.
Volvo EC290B LC (EC290BLC) Excavator Service Repair Manual Instant Download.pdfzhenchun51
The document provides information on an engine, including:
1. The engine is a 6-cylinder, 4-stroke diesel engine with a cast iron block and head. It uses direct injection, turbocharging, and aftercooling.
2. The document includes diagrams and descriptions of the engine components, such as the cylinder head, liners, pistons, rings, valves, and internal exhaust gas recirculation system.
3. Troubleshooting information and procedures are also outlined, such as checking codes, parameters, and performing basic engine tests to diagnose issues.
Volvo EC290B LC (EC290BLC) Excavator Service Repair Manual Instant Download.pdfzu0582kui
The document provides information on an engine, including:
1. The engine is a 6-cylinder, 4-stroke diesel engine with a cast iron block and head. It uses direct injection, turbocharging, and aftercooling.
2. The document includes diagrams and descriptions of the engine components, such as the cylinder head, liners, pistons, rings, valves, and internal exhaust gas recirculation system.
3. Troubleshooting information and procedures are also outlined, such as checking codes, parameters, and performing basic engine tests to diagnose issues.
Volvo EC290B LC (EC290BLC) Excavator Service Repair Manual Instant Download.pdflunrizan628
The document provides information on an engine, including:
1. The engine is a 6-cylinder, 4-stroke diesel engine with a cast iron block and head. It uses direct injection, turbocharging, and air-to-air cooling.
2. The document includes descriptions of various engine components like the cylinder head, liners, pistons, rings, valves, and an internal exhaust gas recirculation system.
3. It also provides an engine characteristic curve showing power, torque, and fuel consumption curves. Basic checks, troubleshooting information, and service information are outlined.
Volvo EC290B LC (EC290BLC) Excavator Service Repair Manual Instant Download.pdfnie7140zhuang
The document provides information on an engine, including:
1. The engine is a 6-cylinder, 4-stroke diesel engine with a cast iron block and head. It uses direct injection, turbocharging, and air-to-air cooling.
2. The document includes diagrams and descriptions of the engine components, such as the cylinder head, liners, pistons, valves, and internal exhaust gas recirculation system.
3. Troubleshooting information and procedures are also outlined, such as checking codes, parameters, and performing basic engine tests to diagnose issues.
Similar to Volvo EC160B LC EC160BLC Excavator Service Repair Manual Instant Download.pdf (20)
Volvo MW500 Wheeled Milling Equipment Service Repair Manual Instant Download.pdffapanhe306271
The document provides instructions for removing an engine from a machine. It is a Deutz TCD 2012 L04 2V four-cylinder diesel engine. The steps include draining fluids, disconnecting fuel lines, electrical connections, hydraulic hoses, and removing mounting bolts. Safety precautions are noted. The engine weighs approximately 950 kg and is removed using hoist points on the engine and a crossmember.
Volvo MC110B Skid Steer Loader Service Repair Manual Instant Download.pdffapanhe306271
The document provides information on removing an engine from a machine. It is a step-by-step process that includes draining fluids, disconnecting hoses and wiring, and removing mounting hardware. The engine is then lifted from the machine using an overhead hoist and placed on engine stands. Precautions are outlined to handle fluids safely and prevent damage to components during removal.
Volvo MC90B Skid Steer Loader Service Repair Manual Instant Download.pdffapanhe306271
This document provides instructions for removing an engine from a machine. It describes draining the coolant and hydraulic oil, disconnecting hoses and wiring, and removing mounting hardware. Special tools are required to lift and support the engine during removal. Safety precautions are outlined regarding hot fluids, lifting equipment, and potential gas leakage when working on air conditioning components.
Volvo MC80B Skid Steer Loader Service Repair Manual Instant Download.pdffapanhe306271
This document provides instructions for removing an engine from various models including the MC80B, MC90B, and MC110B. It is a multi-step process that involves draining fluids, disconnecting hoses and electrical connections, removing mounting hardware, and then using an overhead lift to remove the engine. Safety precautions are provided regarding hot fluids and ensuring stable support of heavy engine components during removal.
Volvo MC70B Skid Steer Loader Service Repair Manual Instant Download.pdffapanhe306271
The document provides instructions for removing an engine from a machine. It involves draining coolant and hydraulic fluid, disconnecting hoses and wiring, removing guards and covers, and then using a lifting tool to remove the engine by detaching it from the front and rear mounts. Hot fluids can cause burns, so protective equipment is advised, and fluids must be handled safely and disposed of properly. The process removes potential hazards to allow the engine to be lifted out for replacement or repair.
Volvo MC60B Skid Steer Loader Service Repair Manual Instant Download.pdffapanhe306271
The document provides instructions for removing the engine from MC60B and MC70B models. It is a 34 step process that involves draining fluids, disconnecting hoses and electrical connections, and then lifting the engine out of the machine using an overhead hoist. Key steps include draining the coolant and transferring it to a storage container, disconnecting the radiator, air intake components, fuel lines, and exhaust system, and then using a lifting tool to remove the engine mounts and lift the engine free of the transmission shaft.
Volvo L330E Wheel Loader Service Repair Manual Instant Download.pdffapanhe306271
The document provides technical specifications and descriptions for various engine components of a Wheel Loader L330E, including:
- The engine has 6 cylinders with a displacement of 16.12 liters. It uses direct injection and is turbocharged.
- The cooling system uses two separate coolant pumps to cool different systems. Fan speed is controlled based on temperature sensors.
- The cylinder head has four valves per cylinder and guides/seats can be replaced. The injector is above the piston crown.
- The cylinder block is cast iron with wet replaceable liners. It has replaceable bearings and reinforced caps.
- Pistons are aluminum alloy with three rings each and piston cooling channels.
Volvo L330D Wheel Loader Service Repair Manual Instant Download.pdffapanhe306271
The document provides information on servicing an engine including:
1) Checking liquid levels, lamps, instruments, battery voltage and fuses as initial checks when troubleshooting engine issues.
2) Separately checking systems that are connected to identify faults.
3) Potential causes of poor engine power being issues in the engine, transmission, torque converter or brakes.
4) Detailed steps for checking the engine including oil, exhaust, air filter, sensors, fuel system and injectors.
Volvo L330C Wheel Loader Service Repair Manual Instant Download.pdffapanhe306271
The document provides specifications and descriptions for a TD164KAE engine used in a Loader L330C. It is a 6-cylinder turbocharged diesel engine with a displacement of 16.12 liters. It produces 366 kW of power at 1800 rpm and 2330 Nm of torque at 1000 rpm. Each cylinder has its own cast iron cylinder head with replaceable guides and valves. There are four valves per cylinder. The injector is positioned vertically above the piston in a copper sleeve cooled by engine coolant.
The document provides information on an engine used in a Loader L330C, including:
1. The engine is a 6-cylinder, direct-injection diesel with turbocharging and charge air cooling.
2. The cylinder bore is 144mm and stroke is 165mm, giving a displacement of 16.12 liters.
3. Specifications like output and torque curves are provided.
Volvo L250G Wheel Loader Service Repair Manual Instant Download.pdffapanhe306271
This document provides instructions for changing a non-programmed E-ECU (engine control unit) on an engine with MID 128. The steps include: placing the machine in service position 1, connecting the VCADS Pro programming tool, turning off voltage, removing covers, disconnecting connectors and hoses from the old ECU, replacing the ECU, reconnecting connectors and hoses, and finishing installation. Connectors are unplugged, cable clamps removed, cooling coil disconnected, old ECU replaced with new one, then cooling coil, connectors and clamps are reinstalled.
Volvo L220G Wheel Loader Service Repair Manual Instant Download.pdffapanhe306271
This document provides instructions for changing a non-programmed E-ECU (engine control unit) on an engine with MID 128. The steps include: placing the machine in service position 1, connecting the VCADS Pro programming tool, turning off voltage, removing covers, disconnecting connectors and hoses from the old ECU, replacing the ECU, reconnecting connectors and hoses, and finishing installation. Connectors are unplugged, cable clamps removed, cooling coil disconnected, old ECU replaced with new one, then cooling coil, connectors and clamps are reinstalled.
Volvo L220F Wheel Loader Service Repair Manual Instant Download.pdffapanhe306271
This document provides instructions for removing an engine from a machine. It outlines disconnecting electrical and fluid connections like coolant, oil, transmission oil, and removing components attached to the engine like hoses, pipes, filters. Safety precautions are mentioned for draining fluids and disabling the fire suppression system before removal. Tools required include lifting equipment and drain hoses. The process also refers to other documents for additional details.
Volvo L220E Wheel Loader Service Repair Manual Instant Download.pdffapanhe306271
The document provides instructions for removing an engine from a machine. It describes draining the coolant and oils, disconnecting hoses and electrical connections, removing protective panels and partitions, and using slings and a lifting tool to remove the engine. Key steps include draining the cooling and hydraulic systems, disconnecting fuel lines and sensors, loosening the alternator belt, and removing mounting bolts before lifting out the heavy engine. Safety warnings are provided to avoid burns when draining hot coolant and not to disconnect air conditioning lines.
Volvo L220D Wheel Loader Service Repair Manual Instant Download.pdffapanhe306271
The document provides information about the cooling system, Pump 3 which controls the cooling fan, and procedures for checking the cooling fan speed and Pump 3 pressure settings on a loader. Key details include:
- The cooling system integrates cooling for the engine, transmission, hydraulics, and optional axle cooling.
- Pump 3 controls the variable speed cooling fan and brake pressure. Its pressure can be checked and adjusted.
- Checks involve connecting gauges and monitors, running the engine at idle and full throttle to read fan speeds and pressures.
- Proper fan speeds are 400-1600 RPM depending on temperature, and Pump 3 pressure should be 1.95-3.0 MPa.
Volvo L180G Wheel Loader Service Repair Manual Instant Download.pdffapanhe306271
This document provides instructions for changing a non-programmed E-ECU (Engine Control Unit) with MID 128 on a machine. The steps include:
1. Placing the machine in service position 1 and connecting the VCADS Pro programming tool.
2. Turning off the voltage with the battery disconnector.
3. Removing the engine cover and crankcase ventilation pipe.
4. Disconnecting connectors and cables from the old E-ECU and installing the new E-ECU.
This document provides instructions for changing a non-programmed E-ECU (Engine Electronic Control Unit) with MID 128 on a machine. The steps include:
1. Placing the machine in service position 1 and connecting the VCADS Pro programming tool.
2. Turning off the voltage with the battery disconnector.
3. Removing the engine cover and crankcase ventilation pipe.
4. Disconnecting connectors and cables from the old E-ECU and installing the new non-programmed E-ECU.
Volvo L180F Wheel Loader Service Repair Manual Instant Download.pdffapanhe306271
This document provides instructions for removing an engine from a machine. It includes preparing the machine by draining fluids like coolant, engine oil, and transmission oil. Components that need to be disconnected from the engine are then listed, such as hoses, pipes, sensors, and guards. Tools needed include lifting equipment and drain hoses. Safety precautions are noted, such as placing the machine in service position and disconnecting the fire suppression system.
This document provides instructions for removing an engine from a machine. It includes preparing the machine by draining fluids like coolant, engine oil, and transmission oil. Components that need to be disconnected from the engine are then listed, such as hoses, pipes, wires, and sensors. Tools needed for the job include a lifting tool, slings, lifting eyes, nuts, and a ratchet block. Safety precautions are mentioned, like placing the machine in service position and turning off the main power.
Volvo L180E Wheel Loader Service Repair Manual Instant Download.pdffapanhe306271
The document provides instructions for removing an engine from a vehicle. It describes draining the coolant and oils, disconnecting hoses and electrical connections, and removing components around the engine like the air filter and radiator. Lifting eyes, slings and a lifting tool are used to lift the engine, which weighs approximately 1350 kg. The transmission is secured in place and components may be transferred to a new engine if replacing it. The process involves over 30 individual steps to fully remove the engine.
Welcome to ASP Cranes, your trusted partner for crane solutions in Raipur, Chhattisgarh! With years of experience and a commitment to excellence, we offer a comprehensive range of crane services tailored to meet your lifting and material handling needs.
At ASP Cranes, we understand the importance of reliable and efficient crane operations in various industries, from construction and manufacturing to logistics and infrastructure development. That's why we strive to deliver top-notch solutions that enhance productivity, safety, and cost-effectiveness for our clients.
Our services include:
Crane Rental: Whether you need a crawler crane for heavy lifting or a hydraulic crane for versatile operations, we have a diverse fleet of well-maintained cranes available for rent. Our rental options are flexible and can be customized to suit your project requirements.
Crane Sales: Looking to invest in a crane for your business? We offer a wide selection of new and used cranes from leading manufacturers, ensuring you find the perfect equipment to match your needs and budget.
Crane Maintenance and Repair: To ensure optimal performance and safety, regular maintenance and timely repairs are essential for cranes. Our team of skilled technicians provides comprehensive maintenance and repair services to keep your equipment running smoothly and minimize downtime.
Crane Operator Training: Proper training is crucial for safe and efficient crane operation. We offer specialized training programs conducted by certified instructors to equip operators with the skills and knowledge they need to handle cranes effectively.
Custom Solutions: We understand that every project is unique, which is why we offer custom crane solutions tailored to your specific requirements. Whether you need modifications, attachments, or specialized equipment, we can design and implement solutions that meet your needs.
At ASP Cranes, customer satisfaction is our top priority. We are dedicated to delivering reliable, cost-effective, and innovative crane solutions that exceed expectations. Contact us today to learn more about our services and how we can support your project in Raipur, Chhattisgarh, and beyond. Let ASP Cranes be your trusted partner for all your crane needs!
What Could Be Behind Your Mercedes Sprinter's Power Loss on Uphill RoadsSprinter Gurus
Unlock the secrets behind your Mercedes Sprinter's uphill power loss with our comprehensive presentation. From fuel filter blockages to turbocharger troubles, we uncover the culprits and empower you to reclaim your vehicle's peak performance. Conquer every ascent with confidence and ensure a thrilling journey every time.
Fleet management these days is next to impossible without connected vehicle solutions. Why? Well, fleet trackers and accompanying connected vehicle management solutions tend to offer quite a few hard-to-ignore benefits to fleet managers and businesses alike. Let’s check them out!
Implementing ELDs or Electronic Logging Devices is slowly but surely becoming the norm in fleet management. Why? Well, integrating ELDs and associated connected vehicle solutions like fleet tracking devices lets businesses and their in-house fleet managers reap several benefits. Check out the post below to learn more.
The Octavia range embodies the design trend of the Škoda brand: a fusion of
aesthetics, safety and practicality. Whether you see the car as a whole or step
closer and explore its unique features, the Octavia range radiates with the
harmony of functionality and emotion
Ever been troubled by the blinking sign and didn’t know what to do?
Here’s a handy guide to dashboard symbols so that you’ll never be confused again!
Save them for later and save the trouble!
Volvo EC160B LC EC160BLC Excavator Service Repair Manual Instant Download.pdf
1. Service Information
Document Title: Function Group: Information Type: Date:
Engine, description (Deutz
D6D EBE2)
200 Service Information 2015/3/11
Profile:
EXC, EC160B LC [GB]
Engine, description (Deutz D6D EBE2)
The engine is a 6–cylinder, 4–stroke, direct injected, turbocharged, aftercooled with a cast iron block and cylinder head.
Gears in the engine gear case are hardened helical type for strength and reduced noise, arranged to provide quiet, smooth
transmission of power.
The cylinder block and head are designed with internal passages forming galleries for both lubricating oil and coolant.
The fan belt is a poly type V-belt for improved performance and an auto tension adjuster maintains belt tension.
Starter side view
Figure 1
Engine, starter side view
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
Coolant inlet (from radiator)
Coolant outlet (to radiator)
Coolant make up port
Air inlet (from air cleaner)
Turbocharger
Intake manifold
Exhaust manifold
Starter
Poly-V belt
Lube oil pipe (supply)
Lube oil pipe (return)
2. 12. Engine oil pan
Alternator side view
Figure 2
Engine, alternator side view
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
Air inlet (from charge air cooler)
Lifting eye (front)
Alternator
Fuel feed pump
Coolant pump
Belt tensioner
Air outlet (to charge air cooler)
Fan drive pulley
Air conditioner compressor pulley
Pulley with vibration damper
Top view
3. Figure 3
Engine, top view
1 Fuel suction port 9 Coolant make up port
2 Engine oil filter 10 Coolant outlet (to radiator)
3 Fuel filter 11 Blowby gas pipe
4 Unit injection pump 12 Air inlet (from air cleaner)
5 Emission label 13 Turbocharger
6 Engine name plate 14 Exhaust gas outlet
7 Power take off device (option) 15 Exhaust manifold
8 Fan drive 16 Intake manifold
Flywheel end view
Figure 4
Engine, flywheel end view
1.
2.
3.
4.
Flywheel
Lifting eye (rear)
Crankcase breather
Coolant temperature sensor port
4. Service Information
Document Title: Function Group: Information Type: Date:
Engine characteristic curve 210 Service Information 2015/3/11
Profile:
EXC, EC160B LC [GB]
Engine characteristic curve
Engine characteristics
Item Specification
Maximum power (Net) 109 HP (81 kW, 110 PS) / 1900 rpm
Maximum torque (Net) 50.9 kgf·m (367.5 lbf·ft, 498.8 N·m) / 1450 rpm
Minimum fuel consumption 160 g / PS·h
Rated fuel consumption 165 g / PS·h
6. Service Information
Document Title: Function Group: Information Type: Date:
Basic check, Engine 210 Service Information 2015/3/11
Profile:
EXC, EC160B LC [GB]
Basic check, Engine
WARNING
Certain tests and checks are performed with unlocked control lockout lever. Make sure that the machine cannot
operate unexpectedly when the control lockout lever is unlocked.
Purpose of the basic check
The purpose of the basic check is to provide fast and accurate information about the general condition of the engine.
The basic check should be performed and evaluated according to instructions in the PC-tool VCADS Pro.
Tests included in the basic check
The basic check which is divided into the following tests should be performed after reading out error codes and checking
parameters.
Tests:
1.
2.
3.
4.
Cylinder compression, test
The purpose of the test is to show if any cylinder has a deviating compression pressure. The test replaces the old
pressure check method but does not give any absolute values.
Cylinder balancing, test
The purpose of the test is to show if there is any deviation in the fuel injection to a cylinder.
Feed pressure, test
The purpose of the test is to check that the feed pressure is as per specification.
Sensor, test
The purpose of the test is to check the function of all sensors.
7. Service Information
Document Title: Function Group: Information Type: Date:
Troubleshooting 210 Service Information 2015/3/11
Profile:
EXC, EC160B LC [GB]
Troubleshooting
When a malfunction is suspected or has been confirmed, it is important to identify the cause as soon as possible.
The starting point for all troubleshooting is that there is some type of trouble symptom or malfunction.
Malfunctions can be indicated by:
generation of error codes
detection of a malfunction symptom.
Troubleshooting work
The first step in troubleshooting is to gather information from the operator concerning the malfunction symptoms, refer to
the Section 3:3, Collection of basic data. Then, attempt to pin-point the cause by checking in a certain order, for more
information, refer to the Section 3:3, troubleshooting strategy.
The different checking steps are:
Check error codes
Check parameters
Perform basic check
Troubleshooting information
The following is included in Section 3:3 and is used when troubleshooting:
1.
2.
3.
4.
5.
6.
7.
8.
9.
Troubleshooting strategy
Describes troubleshooting work, step by step.
Troubleshooting, assistive devices
Brief summary of the assistive devices that are available for troubleshooting.
Functional checks and tests, VCADS Pro
Brief description of VCADS Pro. For a detailed description, refer to the VCADS Pro User’s Manual.
Error code information
Contains information regarding error code design, lists of all error codes and error code information about each
error code.
Components, troubleshooting and specifications
Contains methods and measuring values for troubleshooting of components. Also includes wiring diagrams and
certain specifications.
Parameters
Incorrectly set parameters may cause malfunction symptoms. The parameter list includes all limit and command
values for parameters.
Control units, functional description
Describes the functions of the control units, inputs and outputs as well as communication between the various
control units.
Control units, active and passive measuring
Contains measuring values for active and passive measuring of the ACAS.
Software functions
Describes the prerequisite conditions for the control and monitoring functions that are performed by the software
in the ACAS.
8. Service Information
Document Title: Function Group: Information Type: Date:
Cylinder head, description 211 Service Information 2015/3/11
Profile:
EXC, EC160B LC [GB]
Cylinder head, description
The cylinder head of the D6D engine is made of grey cast iron and designed as block type head. The combustion air enters
vertically and the exhaust air is discharged laterally. Inlet and outlet are located on one side of the cylinder head.
9. Service Information
Document Title: Function Group: Information Type: Date:
Determining cylinder head
gasket
211 Service Information 2015/3/11
Profile:
EXC, EC160B LC [GB]
Determining cylinder head gasket
The thickness of the cylinder head gasket is responsible for the correct piston crown clearance of the engine. The
piston crown clearance (0.65 mm) essentially influences the combustion and thus:
Power
Fuel consumption
Exhaust emission
The piston crown clearance is adjusted by determining the piston projection and the thickness of the cylinder head
gasket.
Measuring piston projection
A dial gauge with a fixture is needed to measure the piston projection.
The piston is in its TDC position above the cylinder block face.
Figure 1
Piston projection, measurement
10. 1.
2.
3.
Dial gauge
Bridge
Two spacer plates
A.
B.
C.
Set the dial gauge on the level of the cylinder block face to “zero”.
Position the dial gauge at measuring points (C), at the piston pin axis on the piston and determine the
maximum projection.
Measuring points on the piston.
Distance X = 90 mm
This measurement is performed on each piston. The maximum measured piston projection determines the thickness of the
cylinder head gasket (see table). There are 3 different gasket thicknesses identified by bores (4):
1 bore = 1.2 mm
2 bores = 1.3 mm
3 bores = 1.4 mm
Piston projection
Piston projection Identification of cylinder head gasket
0.33 ~ 0.55 mm 1 bore
0.56 ~ 0.65 mm 2 bores
0.66 ~ 0.76 mm 3 bores
11. Service Information
Document Title: Function Group: Information Type: Date:
Fitting cylinder head 211 Service Information 2015/3/11
Profile:
EXC, EC160B LC [GB]
Fitting cylinder head
Prior to fitting the cylinder head onto the crankcase, the sealing surfaces for the cylinder head gasket must be clean
and free from oil. Pay attention to dowel sleeves.
Lightly oil the cylinder head bolts.
It is absolutely necessary to observe the bolt tightening order in the adjacent schematic.
Tightening order
Figure 1
Tightening order (exhaust manifold side)
Tightening specification:
1st step: 30 N·m (22.2 lbf·ft, 3.1 kgf·m)
2nd step: 80 N·m (59 lbf·ft, 8.2 kgf·m)
3rd step: 90° turn
12. Service Information
Document Title: Function Group: Information Type: Date:
Cylinder, description 213 Service Information 2015/3/11
Profile:
EXC, EC160B LC [GB]
Cylinder, description
Figure 1
Cylinder liner
1 Cylinder liner
2 Crankcase
3 Liner projection: 0.07 - 0.12 mm
D6D engine with a bore about 98 mm (3.86 in) is provided with dry, plateau-honed slip-fit cylinder liners. In case of damage,
the cylinders of the D6D series are repaired by replacing the slip-fit liners.
13. Service Information
Document Title: Function Group: Information Type: Date:
Pistons, description 213 Service Information 2015/3/11
Profile:
EXC, EC160B LC [GB]
Pistons, description
The pistons of the D6D engine are made of a special aluminium alloy. The piston bowl has a small amount of
eccentricity to the piston axis.
The piston must be installed so that flywheel symbol (1) on the piston top faces the flywheel.
The pistons are equipped with 3 piston rings. The 1st ring has a ring carrier (2) of cast iron.
The cross section of the 1st piston ring is asymmetrical. The cross section of the 2nd piston ring is conical
(compression ring). When installing the piston, the TOP mark at the ring gap must point upwards. The 3rd ring is
the bevelled-edge oil control ring.
14. Service Information
Document Title: Function Group: Information Type: Date:
Piston cooling 213 Service Information 2015/3/11
Profile:
EXC, EC160B LC [GB]
Piston cooling
Figure 1
Piston cooling
The piston is cooled by spraying lube oil against the inside of the piston top.
The 2-hole piston cooling nozzles made of plastic are fitted in the main bearing pedestals.
15. Service Information
Document Title: Function Group: Information Type: Date:
Valves, description 214 Service Information 2015/3/11
Profile:
EXC, EC160B LC [GB]
Valves, description
The engine is provided with one inlet and one exhaust valve per cylinder. The valve guides are shrunk in the
cylinder head. The valve seat inserts are made of high-quality steel and are also shrunk in the cylinder head.
The valves are turned by eccentric actuation through the rocker arms. The new compressed cone connection
permits easy turning of the valve despite stress load.
NOTE!
The valve springs of the D6D have a special installation direction. The colored mark on the spring must show to the
bottom.
Rocker arm lubrication is integrated in the lube oil circuit. The oil is supplied via tappets and push rods.
Valve seat angle
Inlet Exhaust
30° 45°
16. Service Information
Document Title: Function Group: Information Type: Date:
Valves, adjusting 214 Service Information 2015/3/11
Profile:
EXC, EC160B LC [GB]
Valves, adjusting
The valve clearance must be checked and adjusted at specified intervals. To do this, the engine oil temperature must be
between 20 °C (68 °F) and 80 °C (176 °F).
Valve clearance adjustment
Item mm inch
Inlet valve 0.3 0.012
Exhaust valve 0.5 0.020
Adjustment
Figure 1
Valve clearance, adjustment
1.
2.
3.
4.
Remove rocker cover.
Turn crankshaft until both valves in cylinder 1 overlap (Exhaust valve about to close, inlet valve about to open).
Adjust clearance of valves marked in black in figure. Mark respective rocker arm with chalk to show that adjustment
has been done.
Figure 2
Lock nut, tightening
Tighten down the lock nut to 20 N·m (15 lbf·ft) check the adjustment again with a feeler gauge.
17. 5.
6.
Figure 3
Valve clearance, adjustment
Turn crankshaft one full revolution (360°). Now adjust clearance of valves marked black in figure.
Install the valve cover together with a new gasket and tighten down the screws.
Tightening torque: 9 N·m (6.6 lbf·ft)
18. Service Information
Document Title: Function Group: Information Type: Date:
Crankshaft, description 216 Service Information 2015/3/11
Profile:
EXC, EC160B LC [GB]
Crankshaft, description
The forged crankshaft of the D6D engine is provided with integrated balance weights. The drive gear for the timing
gears and the flywheel flange are shrunk on.
Figure 2
Fillet radii on the bearing journal
The material microstructure of the fillet radii on the bearing journals is strengthened by rolling.
Remachining of the fillet radii is therefore not permissible.
Figure 3
Allowable repair limit
In case of repair, there is available one undersize of 0.25 mm (referred to the diameter) for the crank pins and main
bearing journals.
Figure 4
Allowable thrust bearing face repair limit
The thrust bearing face can only be remachined once (oversize: 0.4 mm, 0.2 mm each side).
Thrust bearing clearance of the crankshaft in installed condition: 0.1 to 0.28 mm (0.004 to 0.011 in).
19. Suggest:
If the above button click is invalid.
Please download this document
first, and then click the above link
to download the complete manual.
Thank you so much for reading
20. Service Information
Document Title: Function Group: Information Type: Date:
Connecting rod,
description
216 Service Information 2015/3/11
Profile:
EXC, EC160B LC [GB]
Connecting rod, description
The connecting rod of forged steel is fitted at the big end bearing bore with a balance weight (1) in order to
compensate the manufacturing tolerances with regard to weight and position of the center of gravity.
The number markings (A) on the big end eye and the bearing cap must be on one side and identical.
Locating lugs (2) are provided in the lower and upper bearing shells to prevent the bearing shells from rotating in
their seat; these lugs engage in oblong shaped grooves in the big end eye and big end bearing cap.
The piston must be so installed that the flywheel symbol (B) on the piston top faces the flywheel.
When assembling connecting rod and piston, the centering pins (3) for locating the connecting rod bearing cap
must be fitted on the upper face of the piston on the side of the flywheel symbol (B).
Figure 1
Connecting rod