The document provides information on an engine including:
- The engine is a 6-cylinder 4-stroke turbocharged diesel engine with a cast iron block and head.
- Gears in the engine case are hardened helical gears for strength and reduced noise.
- The document contains diagrams and descriptions of engine components and systems like the cylinder head, pistons, cooling system, and specifications.
Volvo EC180B LC EC180BLC Excavator Service Repair Manual Instant Download.pdftepu22753653
The document provides information on an engine including:
- The engine is a 6-cylinder, 4-stroke diesel engine with cast iron block and head.
- Gears in the engine case are hardened helical type for strength and reduced noise.
- The document includes diagrams of the engine starter side view, alternator side view, top view and flywheel end view labeling parts.
Volvo EC180B LC EC180BLC Excavator Service Repair Manual Instant Download.pdfdai20nao
The document provides information on an engine including:
- The engine is a 6-cylinder, 4-stroke diesel engine with cast iron block and head.
- Gears in the engine case are hardened helical type for strength and reduced noise.
- The document includes diagrams of the engine starter side view, alternator side view, top view and flywheel end view labeling parts.
Volvo EC180B LC EC180BLC Excavator Service Repair Manual Instant Download.pdfrou774513po
The document provides information on an engine including:
- The engine is a 6-cylinder, 4-stroke diesel engine with cast iron block and head.
- Gears in the engine case are hardened helical type for strength and reduced noise.
- The document includes diagrams of the engine starter side view, alternator side view, top view and flywheel end view labeling parts.
Volvo EC180B LC EC180BLC Excavator Service Repair Manual Instant Download.pdfzhenchun51
The document provides information on an engine including:
- The engine is a 6-cylinder, 4-stroke diesel engine with cast iron block and head.
- Gears in the engine case are hardened helical type for strength and reduced noise.
- The document includes diagrams of the engine starter side, alternator side, top view and flywheel end.
Volvo EC180B LC EC180BLC Excavator Service Repair Manual Instant Download.pdff8iosedkdm3e
The document provides information on an engine including:
- The engine is a 6-cylinder, 4-stroke diesel engine with cast iron block and head.
- Gears in the engine case are hardened helical type for strength and reduced noise.
- The document includes diagrams of the engine starter side, alternator side, top view and flywheel end.
Volvo EC180B LC EC180BLC Excavator Service Repair Manual Instant Download.pdfzu0582kui
The document provides information on an engine including:
- The engine is a 6-cylinder, 4-stroke diesel engine with cast iron block and head.
- Gears in the engine case are hardened helical type for strength and reduced noise.
- The document includes diagrams of the engine starter side, alternator side, top view and flywheel end.
Volvo EC180B LC EC180BLC Excavator Service Repair Manual Instant Download.pdffijsekkkdmdm3e
The document provides information on an engine including:
- The engine is a 6-cylinder, 4-stroke diesel engine with cast iron block and head.
- Gears in the engine case are hardened helical type for strength and reduced noise.
- The document includes diagrams of the engine starter side, alternator side, top view and flywheel end.
Volvo EC180B LC EC180BLC Excavator Service Repair Manual Instant Download.pdflunrizan628
The document provides information on an engine including:
- The engine is a 6-cylinder, 4-stroke diesel engine with cast iron block and head.
- Gears in the engine case are hardened helical type for strength and reduced noise.
- The document includes diagrams of the engine starter side view, alternator side view, top view and flywheel end view labeling parts.
Volvo EC180B LC EC180BLC Excavator Service Repair Manual Instant Download.pdftepu22753653
The document provides information on an engine including:
- The engine is a 6-cylinder, 4-stroke diesel engine with cast iron block and head.
- Gears in the engine case are hardened helical type for strength and reduced noise.
- The document includes diagrams of the engine starter side view, alternator side view, top view and flywheel end view labeling parts.
Volvo EC180B LC EC180BLC Excavator Service Repair Manual Instant Download.pdfdai20nao
The document provides information on an engine including:
- The engine is a 6-cylinder, 4-stroke diesel engine with cast iron block and head.
- Gears in the engine case are hardened helical type for strength and reduced noise.
- The document includes diagrams of the engine starter side view, alternator side view, top view and flywheel end view labeling parts.
Volvo EC180B LC EC180BLC Excavator Service Repair Manual Instant Download.pdfrou774513po
The document provides information on an engine including:
- The engine is a 6-cylinder, 4-stroke diesel engine with cast iron block and head.
- Gears in the engine case are hardened helical type for strength and reduced noise.
- The document includes diagrams of the engine starter side view, alternator side view, top view and flywheel end view labeling parts.
Volvo EC180B LC EC180BLC Excavator Service Repair Manual Instant Download.pdfzhenchun51
The document provides information on an engine including:
- The engine is a 6-cylinder, 4-stroke diesel engine with cast iron block and head.
- Gears in the engine case are hardened helical type for strength and reduced noise.
- The document includes diagrams of the engine starter side, alternator side, top view and flywheel end.
Volvo EC180B LC EC180BLC Excavator Service Repair Manual Instant Download.pdff8iosedkdm3e
The document provides information on an engine including:
- The engine is a 6-cylinder, 4-stroke diesel engine with cast iron block and head.
- Gears in the engine case are hardened helical type for strength and reduced noise.
- The document includes diagrams of the engine starter side, alternator side, top view and flywheel end.
Volvo EC180B LC EC180BLC Excavator Service Repair Manual Instant Download.pdfzu0582kui
The document provides information on an engine including:
- The engine is a 6-cylinder, 4-stroke diesel engine with cast iron block and head.
- Gears in the engine case are hardened helical type for strength and reduced noise.
- The document includes diagrams of the engine starter side, alternator side, top view and flywheel end.
Volvo EC180B LC EC180BLC Excavator Service Repair Manual Instant Download.pdffijsekkkdmdm3e
The document provides information on an engine including:
- The engine is a 6-cylinder, 4-stroke diesel engine with cast iron block and head.
- Gears in the engine case are hardened helical type for strength and reduced noise.
- The document includes diagrams of the engine starter side, alternator side, top view and flywheel end.
Volvo EC180B LC EC180BLC Excavator Service Repair Manual Instant Download.pdflunrizan628
The document provides information on an engine including:
- The engine is a 6-cylinder, 4-stroke diesel engine with cast iron block and head.
- Gears in the engine case are hardened helical type for strength and reduced noise.
- The document includes diagrams of the engine starter side view, alternator side view, top view and flywheel end view labeling parts.
Volvo EC180B LC EC180BLC Excavator Service Repair Manual Instant Download.pdfnie7140zhuang
The document provides information on an engine including:
- The engine is a 6-cylinder, 4-stroke diesel engine with cast iron block and head.
- Gears in the engine case are hardened helical type for strength and reduced noise.
- The document includes diagrams of the engine starter side, alternator side, top view and flywheel end.
Volvo EC180B LC EC180BLC Excavator Service Repair Manual Instant Download.pdffapanhe306271
The document provides information on an engine including:
- The engine is a 6-cylinder, 4-stroke diesel engine with cast iron block and head.
- Gears in the engine case are hardened helical type for strength and reduced noise.
- The document includes diagrams of the engine starter side view, alternator side view, top view and flywheel end view labeling parts.
Volvo EC140B LC EC140BLC Excavator Service Repair Manual Instant Download.pdfdai20nao
The document provides information on an engine, including:
- It is a 4-cylinder, 4-stroke engine with a cast iron block and head.
- Gears in the engine gear case are hardened helical type for quiet power transmission.
- The document includes diagrams of the engine layout and specifications for maintenance procedures like valve clearance adjustment.
Volvo EC140B LC EC140BLC Excavator Service Repair Manual Instant Download.pdftepu22753653
The document provides information on an engine, including:
- It is a 4-cylinder, 4-stroke engine with a cast iron block and cylinder head.
- Gears in the engine gear case are hardened helical type for quiet power transmission.
- The document includes diagrams of the engine layout and specifications for maintenance procedures like valve clearance adjustment.
Volvo EC140B LC EC140BLC Excavator Service Repair Manual Instant Download.pdfrou774513po
The document provides information on an engine, including:
- It is a 4-cylinder, 4-stroke engine with a cast iron block and cylinder head.
- Gears in the engine gear case are hardened helical type for quiet power transmission.
- The document contains diagrams of the engine showing components like the intake and exhaust manifolds.
Volvo EC140B LC EC140BLC Excavator Service Repair Manual Instant Download.pdfzhenchun51
The document provides information on an engine, including:
- It is a 4-cylinder, 4-stroke engine with a cast iron block and cylinder head.
- Gears in the engine gear case are hardened helical type for quiet power transmission.
- The document includes diagrams of the engine layout and specifications for maintenance procedures like valve clearance adjustment.
Volvo EC140B LC EC140BLC Excavator Service Repair Manual Instant Download.pdff8iosedkdm3e
The document provides information on an engine, including:
- It is a 4-cylinder, 4-stroke engine with a cast iron block and head.
- Gears in the engine gear case are hardened helical type for quiet power transmission.
- The document includes diagrams of the engine layout and components as well as specifications for maintenance like valve clearance adjustment.
Volvo EC140B LC EC140BLC Excavator Service Repair Manual Instant Download.pdfzu0582kui
The document provides information on an engine, including:
- It is a 4-cylinder, 4-stroke engine with a cast iron block and cylinder head.
- Gears in the engine gear case are hardened helical type for quiet power transmission.
- The document contains diagrams of the engine showing components like the intake and exhaust manifolds.
Volvo EC140B LC EC140BLC Excavator Service Repair Manual Instant Download.pdffijsekkkdmdm3e
The document provides information on an engine, including:
- It is a 4-cylinder, 4-stroke engine with a cast iron block and head.
- Gears in the engine gear case are hardened helical type for quiet power transmission.
- The document includes diagrams of the engine layout and specifications for maintenance procedures like valve clearance adjustment.
Volvo EC140B LC EC140BLC Excavator Service Repair Manual Instant Download.pdflunrizan628
The document provides information on an engine, including:
- It is a 4-cylinder, 4-stroke engine with a cast iron block and cylinder head.
- Gears in the engine gear case are hardened helical type for quiet power transmission.
- The document includes diagrams of the engine layout and specifications for maintenance procedures like valve clearance adjustment.
Volvo EC140B LC EC140BLC Excavator Service Repair Manual Instant Download.pdfnie7140zhuang
The document provides information on an engine, including:
- It is a 4-cylinder, 4-stroke engine with a cast iron block and cylinder head.
- Gears in the engine gear case are hardened helical type for quiet power transmission.
- The document contains diagrams of the engine showing components like the intake and exhaust manifolds.
Volvo EC140B LC EC140BLC Excavator Service Repair Manual Instant Download.pdffapanhe306271
The document provides information on an engine, including:
- It is a 4-cylinder, 4-stroke engine with a cast iron block and cylinder head.
- Gears in the engine gear case are hardened helical type for quiet power transmission.
- The document contains diagrams of the engine showing components like the intake and exhaust manifolds.
Volvo EC290B LC (EC290BLC) Excavator Service Repair Manual Instant Download.pdff8iosedkdm3e
This document provides descriptions of various engine components for a Volvo D7D engine, including:
- The cylinder head is made of grey cast iron with vertically entering induction air and horizontally exiting exhaust. It uses three different thickness cylinder head gaskets.
- The engine uses wet cylinder liners sealed with two O-rings and pressure from the cylinder head.
- The pistons are made of aluminum alloy with a combustion cavity, flywheel symbol, and cooled by oil spray from nozzles. They use two compression rings and one oil control ring.
- Piston rings include two compression rings, one with a cast iron carrier, and an oil ring with a beveled edge. They are installed with
Volvo EC290B LC (EC290BLC) Excavator Service Repair Manual Instant Download.pdffijsekkkdmdm3e
The document provides information on an engine, including:
1. The engine is a 6-cylinder, 4-stroke diesel engine with a cast iron block and head. It uses direct injection, turbocharging, and aftercooling.
2. The document includes diagrams and descriptions of the engine components such as the cylinder head, liners, pistons, rings, valves, and internal exhaust gas recirculation system.
3. The document provides information and diagrams related to performing basic checks, troubleshooting, and maintenance of the engine.
Volvo EC290B LC (EC290BLC) Excavator Service Repair Manual Instant Download.pdftepu22753653
The document provides information on an engine, including:
1. The engine is a 6-cylinder, 4-stroke diesel engine with a cast iron block and head. It uses direct injection, turbocharging, and aftercooling.
2. The document includes diagrams and descriptions of the engine components such as the cylinder head, liners, pistons, rings, valves, and internal exhaust gas recirculation system.
3. Troubleshooting information and procedures are also outlined, such as checking codes, parameters, and performing basic engine tests to diagnose issues.
Volvo EC290B LC (EC290BLC) Excavator Service Repair Manual Instant Download.pdfrou774513po
The document provides information on an engine, including:
1. The engine is a 6-cylinder, 4-stroke diesel engine with a cast iron block and head. It uses direct injection, turbocharging, and aftercooling.
2. The document includes diagrams and descriptions of the engine components such as the cylinder head, liners, pistons, rings, valves, and internal exhaust gas recirculation system.
3. Troubleshooting information is also provided, with steps like checking error codes, parameters, and performing basic engine tests to diagnose issues.
Volvo EC290B LC (EC290BLC) Excavator Service Repair Manual Instant Download.pdfzhenchun51
The document provides information on an engine, including:
1. The engine is a 6-cylinder, 4-stroke diesel engine with a cast iron block and head. It uses direct injection, turbocharging, and aftercooling.
2. The document includes diagrams and descriptions of the engine components, such as the cylinder head, liners, pistons, rings, valves, and internal exhaust gas recirculation system.
3. Troubleshooting information and procedures are also outlined, such as checking codes, parameters, and performing basic engine tests to diagnose issues.
Volvo EC290B LC (EC290BLC) Excavator Service Repair Manual Instant Download.pdfzu0582kui
The document provides information on an engine, including:
1. The engine is a 6-cylinder, 4-stroke diesel engine with a cast iron block and head. It uses direct injection, turbocharging, and aftercooling.
2. The document includes diagrams and descriptions of the engine components, such as the cylinder head, liners, pistons, rings, valves, and internal exhaust gas recirculation system.
3. Troubleshooting information and procedures are also outlined, such as checking codes, parameters, and performing basic engine tests to diagnose issues.
Volvo EC290B LC (EC290BLC) Excavator Service Repair Manual Instant Download.pdflunrizan628
The document provides information on an engine, including:
1. The engine is a 6-cylinder, 4-stroke diesel engine with a cast iron block and head. It uses direct injection, turbocharging, and air-to-air cooling.
2. The document includes descriptions of various engine components like the cylinder head, liners, pistons, rings, valves, and an internal exhaust gas recirculation system.
3. It also provides an engine characteristic curve showing power, torque, and fuel consumption curves. Basic checks, troubleshooting information, and service information are outlined.
Volvo EC290B LC (EC290BLC) Excavator Service Repair Manual Instant Download.pdfnie7140zhuang
The document provides information on an engine, including:
1. The engine is a 6-cylinder, 4-stroke diesel engine with a cast iron block and head. It uses direct injection, turbocharging, and air-to-air cooling.
2. The document includes diagrams and descriptions of the engine components, such as the cylinder head, liners, pistons, valves, and internal exhaust gas recirculation system.
3. Troubleshooting information and procedures are also outlined, such as checking codes, parameters, and performing basic engine tests to diagnose issues.
Volvo L110G Wheel Loader Service Repair Manual Instant Download.pdff8iosedkdm3e
This document provides information on an engine and its components:
1) It describes the D8H engine, which is a 6-cylinder 4-stroke turbocharged diesel engine that meets Tier 4 interim emissions standards. It has a common rail fuel system and exhaust aftertreatment system.
2) It lists the engine's components and their locations, and provides two figures showing the positions of various components.
3) It explains the engine's identification information, protection systems, warning lights, and parameters that can be adjusted via the ECU. Procedures for replacing the ECU in both programmed and non-programmed states are also provided.
Volvo L25F Compact Wheel Loader Service Repair Manual Instant Download.pdff8iosedkdm3e
This document provides instructions for removing and installing an engine. It describes disconnecting fuel lines, electrical connections, removing mounting brackets, and lifting the engine out of the machine using hoisting equipment. The installation instructions describe lowering the engine back into place and reconnecting all lines, brackets and electrical connections in the reverse order of removal. Safety warnings are provided to be alert when handling heavy components.
More Related Content
Similar to Volvo EC160B LC EC160BLC Excavator Service Repair Manual Instant Download.pdf
Volvo EC180B LC EC180BLC Excavator Service Repair Manual Instant Download.pdfnie7140zhuang
The document provides information on an engine including:
- The engine is a 6-cylinder, 4-stroke diesel engine with cast iron block and head.
- Gears in the engine case are hardened helical type for strength and reduced noise.
- The document includes diagrams of the engine starter side, alternator side, top view and flywheel end.
Volvo EC180B LC EC180BLC Excavator Service Repair Manual Instant Download.pdffapanhe306271
The document provides information on an engine including:
- The engine is a 6-cylinder, 4-stroke diesel engine with cast iron block and head.
- Gears in the engine case are hardened helical type for strength and reduced noise.
- The document includes diagrams of the engine starter side view, alternator side view, top view and flywheel end view labeling parts.
Volvo EC140B LC EC140BLC Excavator Service Repair Manual Instant Download.pdfdai20nao
The document provides information on an engine, including:
- It is a 4-cylinder, 4-stroke engine with a cast iron block and head.
- Gears in the engine gear case are hardened helical type for quiet power transmission.
- The document includes diagrams of the engine layout and specifications for maintenance procedures like valve clearance adjustment.
Volvo EC140B LC EC140BLC Excavator Service Repair Manual Instant Download.pdftepu22753653
The document provides information on an engine, including:
- It is a 4-cylinder, 4-stroke engine with a cast iron block and cylinder head.
- Gears in the engine gear case are hardened helical type for quiet power transmission.
- The document includes diagrams of the engine layout and specifications for maintenance procedures like valve clearance adjustment.
Volvo EC140B LC EC140BLC Excavator Service Repair Manual Instant Download.pdfrou774513po
The document provides information on an engine, including:
- It is a 4-cylinder, 4-stroke engine with a cast iron block and cylinder head.
- Gears in the engine gear case are hardened helical type for quiet power transmission.
- The document contains diagrams of the engine showing components like the intake and exhaust manifolds.
Volvo EC140B LC EC140BLC Excavator Service Repair Manual Instant Download.pdfzhenchun51
The document provides information on an engine, including:
- It is a 4-cylinder, 4-stroke engine with a cast iron block and cylinder head.
- Gears in the engine gear case are hardened helical type for quiet power transmission.
- The document includes diagrams of the engine layout and specifications for maintenance procedures like valve clearance adjustment.
Volvo EC140B LC EC140BLC Excavator Service Repair Manual Instant Download.pdff8iosedkdm3e
The document provides information on an engine, including:
- It is a 4-cylinder, 4-stroke engine with a cast iron block and head.
- Gears in the engine gear case are hardened helical type for quiet power transmission.
- The document includes diagrams of the engine layout and components as well as specifications for maintenance like valve clearance adjustment.
Volvo EC140B LC EC140BLC Excavator Service Repair Manual Instant Download.pdfzu0582kui
The document provides information on an engine, including:
- It is a 4-cylinder, 4-stroke engine with a cast iron block and cylinder head.
- Gears in the engine gear case are hardened helical type for quiet power transmission.
- The document contains diagrams of the engine showing components like the intake and exhaust manifolds.
Volvo EC140B LC EC140BLC Excavator Service Repair Manual Instant Download.pdffijsekkkdmdm3e
The document provides information on an engine, including:
- It is a 4-cylinder, 4-stroke engine with a cast iron block and head.
- Gears in the engine gear case are hardened helical type for quiet power transmission.
- The document includes diagrams of the engine layout and specifications for maintenance procedures like valve clearance adjustment.
Volvo EC140B LC EC140BLC Excavator Service Repair Manual Instant Download.pdflunrizan628
The document provides information on an engine, including:
- It is a 4-cylinder, 4-stroke engine with a cast iron block and cylinder head.
- Gears in the engine gear case are hardened helical type for quiet power transmission.
- The document includes diagrams of the engine layout and specifications for maintenance procedures like valve clearance adjustment.
Volvo EC140B LC EC140BLC Excavator Service Repair Manual Instant Download.pdfnie7140zhuang
The document provides information on an engine, including:
- It is a 4-cylinder, 4-stroke engine with a cast iron block and cylinder head.
- Gears in the engine gear case are hardened helical type for quiet power transmission.
- The document contains diagrams of the engine showing components like the intake and exhaust manifolds.
Volvo EC140B LC EC140BLC Excavator Service Repair Manual Instant Download.pdffapanhe306271
The document provides information on an engine, including:
- It is a 4-cylinder, 4-stroke engine with a cast iron block and cylinder head.
- Gears in the engine gear case are hardened helical type for quiet power transmission.
- The document contains diagrams of the engine showing components like the intake and exhaust manifolds.
Volvo EC290B LC (EC290BLC) Excavator Service Repair Manual Instant Download.pdff8iosedkdm3e
This document provides descriptions of various engine components for a Volvo D7D engine, including:
- The cylinder head is made of grey cast iron with vertically entering induction air and horizontally exiting exhaust. It uses three different thickness cylinder head gaskets.
- The engine uses wet cylinder liners sealed with two O-rings and pressure from the cylinder head.
- The pistons are made of aluminum alloy with a combustion cavity, flywheel symbol, and cooled by oil spray from nozzles. They use two compression rings and one oil control ring.
- Piston rings include two compression rings, one with a cast iron carrier, and an oil ring with a beveled edge. They are installed with
Volvo EC290B LC (EC290BLC) Excavator Service Repair Manual Instant Download.pdffijsekkkdmdm3e
The document provides information on an engine, including:
1. The engine is a 6-cylinder, 4-stroke diesel engine with a cast iron block and head. It uses direct injection, turbocharging, and aftercooling.
2. The document includes diagrams and descriptions of the engine components such as the cylinder head, liners, pistons, rings, valves, and internal exhaust gas recirculation system.
3. The document provides information and diagrams related to performing basic checks, troubleshooting, and maintenance of the engine.
Volvo EC290B LC (EC290BLC) Excavator Service Repair Manual Instant Download.pdftepu22753653
The document provides information on an engine, including:
1. The engine is a 6-cylinder, 4-stroke diesel engine with a cast iron block and head. It uses direct injection, turbocharging, and aftercooling.
2. The document includes diagrams and descriptions of the engine components such as the cylinder head, liners, pistons, rings, valves, and internal exhaust gas recirculation system.
3. Troubleshooting information and procedures are also outlined, such as checking codes, parameters, and performing basic engine tests to diagnose issues.
Volvo EC290B LC (EC290BLC) Excavator Service Repair Manual Instant Download.pdfrou774513po
The document provides information on an engine, including:
1. The engine is a 6-cylinder, 4-stroke diesel engine with a cast iron block and head. It uses direct injection, turbocharging, and aftercooling.
2. The document includes diagrams and descriptions of the engine components such as the cylinder head, liners, pistons, rings, valves, and internal exhaust gas recirculation system.
3. Troubleshooting information is also provided, with steps like checking error codes, parameters, and performing basic engine tests to diagnose issues.
Volvo EC290B LC (EC290BLC) Excavator Service Repair Manual Instant Download.pdfzhenchun51
The document provides information on an engine, including:
1. The engine is a 6-cylinder, 4-stroke diesel engine with a cast iron block and head. It uses direct injection, turbocharging, and aftercooling.
2. The document includes diagrams and descriptions of the engine components, such as the cylinder head, liners, pistons, rings, valves, and internal exhaust gas recirculation system.
3. Troubleshooting information and procedures are also outlined, such as checking codes, parameters, and performing basic engine tests to diagnose issues.
Volvo EC290B LC (EC290BLC) Excavator Service Repair Manual Instant Download.pdfzu0582kui
The document provides information on an engine, including:
1. The engine is a 6-cylinder, 4-stroke diesel engine with a cast iron block and head. It uses direct injection, turbocharging, and aftercooling.
2. The document includes diagrams and descriptions of the engine components, such as the cylinder head, liners, pistons, rings, valves, and internal exhaust gas recirculation system.
3. Troubleshooting information and procedures are also outlined, such as checking codes, parameters, and performing basic engine tests to diagnose issues.
Volvo EC290B LC (EC290BLC) Excavator Service Repair Manual Instant Download.pdflunrizan628
The document provides information on an engine, including:
1. The engine is a 6-cylinder, 4-stroke diesel engine with a cast iron block and head. It uses direct injection, turbocharging, and air-to-air cooling.
2. The document includes descriptions of various engine components like the cylinder head, liners, pistons, rings, valves, and an internal exhaust gas recirculation system.
3. It also provides an engine characteristic curve showing power, torque, and fuel consumption curves. Basic checks, troubleshooting information, and service information are outlined.
Volvo EC290B LC (EC290BLC) Excavator Service Repair Manual Instant Download.pdfnie7140zhuang
The document provides information on an engine, including:
1. The engine is a 6-cylinder, 4-stroke diesel engine with a cast iron block and head. It uses direct injection, turbocharging, and air-to-air cooling.
2. The document includes diagrams and descriptions of the engine components, such as the cylinder head, liners, pistons, valves, and internal exhaust gas recirculation system.
3. Troubleshooting information and procedures are also outlined, such as checking codes, parameters, and performing basic engine tests to diagnose issues.
Similar to Volvo EC160B LC EC160BLC Excavator Service Repair Manual Instant Download.pdf (20)
Volvo L110G Wheel Loader Service Repair Manual Instant Download.pdff8iosedkdm3e
This document provides information on an engine and its components:
1) It describes the D8H engine, which is a 6-cylinder 4-stroke turbocharged diesel engine that meets Tier 4 interim emissions standards. It has a common rail fuel system and exhaust aftertreatment system.
2) It lists the engine's components and their locations, and provides two figures showing the positions of various components.
3) It explains the engine's identification information, protection systems, warning lights, and parameters that can be adjusted via the ECU. Procedures for replacing the ECU in both programmed and non-programmed states are also provided.
Volvo L25F Compact Wheel Loader Service Repair Manual Instant Download.pdff8iosedkdm3e
This document provides instructions for removing and installing an engine. It describes disconnecting fuel lines, electrical connections, removing mounting brackets, and lifting the engine out of the machine using hoisting equipment. The installation instructions describe lowering the engine back into place and reconnecting all lines, brackets and electrical connections in the reverse order of removal. Safety warnings are provided to be alert when handling heavy components.
Volvo EW180C Wheeled Excavator Service Repair Manual Instant Download.pdff8iosedkdm3e
The document provides information on the D6E engine configuration, which is a four-stroke, straight six cylinder, turbocharged diesel engine with charge air cooling and wet cylinder liners. It uses a Common Rail fuel system and electronically controlled internal exhaust gas recirculation to reduce emissions without exhaust aftertreatment. The cylinders are numbered consecutively from the flywheel end and the engine rotates counterclockwise. Component locations on the engine are also shown.
Volvo EC300D NL EC300DNL Excavator Service Repair Manual Instant Download.pdff8iosedkdm3e
The document provides service information about engine D8H, including:
1) Engine D8H is a 6-cylinder turbocharged diesel engine that meets Tier 4 interim emissions standards and features a common rail fuel system and exhaust aftertreatment system.
2) The engine has an electronic control unit that controls all electronic functions and contains functionality to protect the engine from damage during extreme operating conditions.
3) The document provides information on component locations, instructions for changing a non-programmed or pre-programmed electronic control unit, and lists available VCADS Pro operations for working on engine components and functions.
Volvo FC3329C Excavator Service Repair Manual Instant Download.pdff8iosedkdm3e
The document provides service information about an engine, including:
1) The D7E engine is a four-stroke, straight six cylinder, turbocharged diesel engine with charge air cooling and wet cylinder liners.
2) The engine uses Common Rail fuel injection controlled by an electronic control unit. Internally recirculated exhaust gas reduces emissions without aftertreatment.
3) The document describes various engine components like the camshaft, crankshaft, vibration damper, and connecting rods. It also provides maintenance instructions for changing the oil level sensor.
Volvo EC300D LR EC300DLR Excavator Service Repair Manual Instant Download.pdff8iosedkdm3e
The document provides information about replacing the thermostat in an engine cooling system. It involves draining the coolant, removing the radiator hose and thermostat housing, and replacing the old thermostat and gasket with new ones. The cooling system is then refilled with coolant and checked for leaks.
Volvo MC80B Skid Steer Loader Service Repair Manual Instant Download.pdff8iosedkdm3e
This document provides information about removing an engine from a machine. It lists 23 steps for removing the engine, including draining fluids, disconnecting hoses and wires, and removing components attached to the engine like the radiator, exhaust system, and air cleaner. Precautions are mentioned for handling fluids and keeping connections clean during the process. The document also includes diagrams to illustrate the components and connections.
Volvo PL4608 Pipelayer Service Repair Manual Instant Download.pdff8iosedkdm3e
The document provides information on servicing an engine, including:
- Descriptions of the D12D engine including its components and systems.
- Procedures for basic engine checks, troubleshooting, adjusting valves, replacing the front crankshaft oil seal, and descriptions of the internal exhaust gas recirculation system.
- Diagrams illustrating the engine, its parts, and servicing steps.
The document is intended as a service information guide for technicians working on the Volvo D12D engine. It covers the engine's design and maintenance tasks.
Volvo EW210C Wheeled Excavator Service Repair Manual Instant Download.pdff8iosedkdm3e
The document provides information on the D6E engine configuration and components. It describes the D6E as a four-stroke, straight six cylinder turbocharged diesel engine with charge air cooling, wet cylinder liners, and a common rail fuel system. The cylinders are numbered consecutively from the flywheel end and the engine rotates counterclockwise. Key components like the fuel system, ECU, and cylinder head are also described briefly.
Volvo FC2924C Excavator Service Repair Manual Instant Download.pdff8iosedkdm3e
The document provides technical specifications and descriptions for various engine components of the D7E engine. It includes 3 sentences or less summaries of sections on the cylinder head, cylinder liners, pistons, valves, camshaft, crankshaft, vibration damper, and connecting rod. Diagrams and illustrations are provided to accompany each section. The document appears to be a service manual or technical specification sheet for mechanics working on this engine model.
Volvo EC340D L EC340DL Excavator Service Repair Manual Instant Download.pdff8iosedkdm3e
This document provides information on engines D11H, D13H, and D16H including:
- They are straight six-cylinder, four-stroke, direct-injected diesel engines equipped with a single variable geometry turbocharger and cooled external exhaust gas recirculation.
- The engines have a one-piece cylinder head with four valves per cylinder and a single overhead camshaft.
- The document provides information on engine identification, component locations, procedures for changing a non-programmed or pre-programmed ECU, and lists available VCADS Pro operations.
Volvo EW180 Wheeled Excavator Service Repair Manual Instant Download.pdff8iosedkdm3e
The document provides information on the Cummins B5.9-C engine, including:
- Engine specifications such as rated output, max torque, and fuel consumption.
- Descriptions of the engine block, cylinder head, gears, and cooling system.
- Diagrams of the engine, fuel system, lubrication system, and other components.
- Procedures for valve clearance adjustment, injection nozzle installation, and engine mounting.
- Descriptions of the fuel tank, fuel filler pump, and fuel warmer.
Volvo EC300D L (EC300DL) Excavator Service Repair Manual Instant Download.pdff8iosedkdm3e
This document provides service information about engine D8H, including:
1) Engine D8H is a 6-cylinder turbocharged diesel engine that meets Tier 4 interim emissions standards and features a common rail fuel system and exhaust aftertreatment system.
2) The engine has electronic engine controls and includes functions to protect the engine from damage during extreme operating conditions.
3) The document provides information on engine components, procedures for replacing the electronic control unit, and available VCADS Pro diagnostic operations.
Volvo EC15C Compact Excavator Service Repair Manual Instant Download.pdff8iosedkdm3e
This document provides troubleshooting information for an engine. It includes a chart listing common trouble symptoms, possible causes, and recommended corrective actions. It also describes removing an engine, which involves disconnecting various components like the battery, fuel lines, radiator, and hoses before using lifting equipment to remove the engine.
Volvo EC27C Compact Excavator Service Repair Manual Instant Download.pdff8iosedkdm3e
This document provides instructions for removing and installing an engine. It describes 35 steps for removing the engine, which include draining coolant, disconnecting hoses and electrical connections, and removing covers and panels. It then describes 28 steps for installing the engine, which involve connecting hoses and electrical connections, installing covers and panels, and filling the cooling system. Detailed diagrams are provided to illustrate each step. Safety warnings are included regarding handling heavy components and hot coolant.
Volvo A30E Articulated Dump Truck Service Repair Manual Instant Download.pdff8iosedkdm3e
The document provides instructions for removing an engine and transmission from a vehicle. It describes draining fluids like oil, coolant and transmission fluid. Cross members and underbody skid plates are removed. Then the engine oil, gearbox oil, and coolant are drained. Hoses and electrical connections to the engine are disconnected before lifting it out.
Volvo EC55-EU Compact Excavator Service Repair Manual Instant Download.pdff8iosedkdm3e
This document provides maintenance standards and specifications for an engine. It describes the engine as a 4-cylinder, direct injected diesel engine. It then provides detailed specifications and tolerance ranges for engine components in 3 tables, covering items like valve gaps, pump clearances, piston diameters and more. Figures include diagrams of the engine layout and performance curves.
This document contains information about performing a compression test on an engine. It provides instructions on preparing the engine, connecting tools like adapters and a pressure gauge, and bleeding fuel from the system. The test is done by connecting a computer and selecting the cylinder compression test function to check for any deviations between cylinders.
This document provides service information for compression testing engines, including the necessary tools, safety precautions, and step-by-step instructions. It describes removing the fuel lines and injectors from the engine to access the cylinders. The adapter and pressure gauge are then installed on cylinder 1 to perform the compression test while the safety stop is engaged. Similar steps are followed to test each additional cylinder individually.
Volvo A25D Articulated Dump Truck Service Repair Manual Instant Download.pdff8iosedkdm3e
This document provides service information for performing a compression test on engines. It describes the necessary tools, preparation steps like cleaning and removing fuel lines, and the procedure which involves placing the machine in service position and using an adapter and pressure gauge on each cylinder. Safety warnings are provided about the fuel lines. The document also references valve adjustment procedures.
Fleet management these days is next to impossible without connected vehicle solutions. Why? Well, fleet trackers and accompanying connected vehicle management solutions tend to offer quite a few hard-to-ignore benefits to fleet managers and businesses alike. Let’s check them out!
Welcome to ASP Cranes, your trusted partner for crane solutions in Raipur, Chhattisgarh! With years of experience and a commitment to excellence, we offer a comprehensive range of crane services tailored to meet your lifting and material handling needs.
At ASP Cranes, we understand the importance of reliable and efficient crane operations in various industries, from construction and manufacturing to logistics and infrastructure development. That's why we strive to deliver top-notch solutions that enhance productivity, safety, and cost-effectiveness for our clients.
Our services include:
Crane Rental: Whether you need a crawler crane for heavy lifting or a hydraulic crane for versatile operations, we have a diverse fleet of well-maintained cranes available for rent. Our rental options are flexible and can be customized to suit your project requirements.
Crane Sales: Looking to invest in a crane for your business? We offer a wide selection of new and used cranes from leading manufacturers, ensuring you find the perfect equipment to match your needs and budget.
Crane Maintenance and Repair: To ensure optimal performance and safety, regular maintenance and timely repairs are essential for cranes. Our team of skilled technicians provides comprehensive maintenance and repair services to keep your equipment running smoothly and minimize downtime.
Crane Operator Training: Proper training is crucial for safe and efficient crane operation. We offer specialized training programs conducted by certified instructors to equip operators with the skills and knowledge they need to handle cranes effectively.
Custom Solutions: We understand that every project is unique, which is why we offer custom crane solutions tailored to your specific requirements. Whether you need modifications, attachments, or specialized equipment, we can design and implement solutions that meet your needs.
At ASP Cranes, customer satisfaction is our top priority. We are dedicated to delivering reliable, cost-effective, and innovative crane solutions that exceed expectations. Contact us today to learn more about our services and how we can support your project in Raipur, Chhattisgarh, and beyond. Let ASP Cranes be your trusted partner for all your crane needs!
Implementing ELDs or Electronic Logging Devices is slowly but surely becoming the norm in fleet management. Why? Well, integrating ELDs and associated connected vehicle solutions like fleet tracking devices lets businesses and their in-house fleet managers reap several benefits. Check out the post below to learn more.
Ever been troubled by the blinking sign and didn’t know what to do?
Here’s a handy guide to dashboard symbols so that you’ll never be confused again!
Save them for later and save the trouble!
EV Charging at Multifamily Properties by Kevin Donnelly
Volvo EC160B LC EC160BLC Excavator Service Repair Manual Instant Download.pdf
1. Service Information
Document Title: Function Group: Information Type: Date:
Engine, description (Deutz
D6D EBE2)
200 Service Information 2015/3/11
Profile:
EXC, EC160B LC [GB]
Engine, description (Deutz D6D EBE2)
The engine is a 6–cylinder, 4–stroke, direct injected, turbocharged, aftercooled with a cast iron block and cylinder head.
Gears in the engine gear case are hardened helical type for strength and reduced noise, arranged to provide quiet, smooth
transmission of power.
The cylinder block and head are designed with internal passages forming galleries for both lubricating oil and coolant.
The fan belt is a poly type V-belt for improved performance and an auto tension adjuster maintains belt tension.
Starter side view
Figure 1
Engine, starter side view
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
Coolant inlet (from radiator)
Coolant outlet (to radiator)
Coolant make up port
Air inlet (from air cleaner)
Turbocharger
Intake manifold
Exhaust manifold
Starter
Poly-V belt
Lube oil pipe (supply)
Lube oil pipe (return)
2. 12. Engine oil pan
Alternator side view
Figure 2
Engine, alternator side view
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
Air inlet (from charge air cooler)
Lifting eye (front)
Alternator
Fuel feed pump
Coolant pump
Belt tensioner
Air outlet (to charge air cooler)
Fan drive pulley
Air conditioner compressor pulley
Pulley with vibration damper
Top view
3. Figure 3
Engine, top view
1 Fuel suction port 9 Coolant make up port
2 Engine oil filter 10 Coolant outlet (to radiator)
3 Fuel filter 11 Blowby gas pipe
4 Unit injection pump 12 Air inlet (from air cleaner)
5 Emission label 13 Turbocharger
6 Engine name plate 14 Exhaust gas outlet
7 Power take off device (option) 15 Exhaust manifold
8 Fan drive 16 Intake manifold
Flywheel end view
Figure 4
Engine, flywheel end view
1.
2.
3.
4.
Flywheel
Lifting eye (rear)
Crankcase breather
Coolant temperature sensor port
4. Service Information
Document Title: Function Group: Information Type: Date:
Engine characteristic curve 210 Service Information 2015/3/11
Profile:
EXC, EC160B LC [GB]
Engine characteristic curve
Engine characteristics
Item Specification
Maximum power (Net) 109 HP (81 kW, 110 PS) / 1900 rpm
Maximum torque (Net) 50.9 kgf·m (367.5 lbf·ft, 498.8 N·m) / 1450 rpm
Minimum fuel consumption 160 g / PS·h
Rated fuel consumption 165 g / PS·h
6. Service Information
Document Title: Function Group: Information Type: Date:
Basic check, Engine 210 Service Information 2015/3/11
Profile:
EXC, EC160B LC [GB]
Basic check, Engine
WARNING
Certain tests and checks are performed with unlocked control lockout lever. Make sure that the machine cannot
operate unexpectedly when the control lockout lever is unlocked.
Purpose of the basic check
The purpose of the basic check is to provide fast and accurate information about the general condition of the engine.
The basic check should be performed and evaluated according to instructions in the PC-tool VCADS Pro.
Tests included in the basic check
The basic check which is divided into the following tests should be performed after reading out error codes and checking
parameters.
Tests:
1.
2.
3.
4.
Cylinder compression, test
The purpose of the test is to show if any cylinder has a deviating compression pressure. The test replaces the old
pressure check method but does not give any absolute values.
Cylinder balancing, test
The purpose of the test is to show if there is any deviation in the fuel injection to a cylinder.
Feed pressure, test
The purpose of the test is to check that the feed pressure is as per specification.
Sensor, test
The purpose of the test is to check the function of all sensors.
7. Service Information
Document Title: Function Group: Information Type: Date:
Troubleshooting 210 Service Information 2015/3/11
Profile:
EXC, EC160B LC [GB]
Troubleshooting
When a malfunction is suspected or has been confirmed, it is important to identify the cause as soon as possible.
The starting point for all troubleshooting is that there is some type of trouble symptom or malfunction.
Malfunctions can be indicated by:
generation of error codes
detection of a malfunction symptom.
Troubleshooting work
The first step in troubleshooting is to gather information from the operator concerning the malfunction symptoms, refer to
the Section 3:3, Collection of basic data. Then, attempt to pin-point the cause by checking in a certain order, for more
information, refer to the Section 3:3, troubleshooting strategy.
The different checking steps are:
Check error codes
Check parameters
Perform basic check
Troubleshooting information
The following is included in Section 3:3 and is used when troubleshooting:
1.
2.
3.
4.
5.
6.
7.
8.
9.
Troubleshooting strategy
Describes troubleshooting work, step by step.
Troubleshooting, assistive devices
Brief summary of the assistive devices that are available for troubleshooting.
Functional checks and tests, VCADS Pro
Brief description of VCADS Pro. For a detailed description, refer to the VCADS Pro User’s Manual.
Error code information
Contains information regarding error code design, lists of all error codes and error code information about each
error code.
Components, troubleshooting and specifications
Contains methods and measuring values for troubleshooting of components. Also includes wiring diagrams and
certain specifications.
Parameters
Incorrectly set parameters may cause malfunction symptoms. The parameter list includes all limit and command
values for parameters.
Control units, functional description
Describes the functions of the control units, inputs and outputs as well as communication between the various
control units.
Control units, active and passive measuring
Contains measuring values for active and passive measuring of the ACAS.
Software functions
Describes the prerequisite conditions for the control and monitoring functions that are performed by the software
in the ACAS.
8. Service Information
Document Title: Function Group: Information Type: Date:
Cylinder head, description 211 Service Information 2015/3/11
Profile:
EXC, EC160B LC [GB]
Cylinder head, description
The cylinder head of the D6D engine is made of grey cast iron and designed as block type head. The combustion air enters
vertically and the exhaust air is discharged laterally. Inlet and outlet are located on one side of the cylinder head.
9. Service Information
Document Title: Function Group: Information Type: Date:
Determining cylinder head
gasket
211 Service Information 2015/3/11
Profile:
EXC, EC160B LC [GB]
Determining cylinder head gasket
The thickness of the cylinder head gasket is responsible for the correct piston crown clearance of the engine. The
piston crown clearance (0.65 mm) essentially influences the combustion and thus:
Power
Fuel consumption
Exhaust emission
The piston crown clearance is adjusted by determining the piston projection and the thickness of the cylinder head
gasket.
Measuring piston projection
A dial gauge with a fixture is needed to measure the piston projection.
The piston is in its TDC position above the cylinder block face.
Figure 1
Piston projection, measurement
10. 1.
2.
3.
Dial gauge
Bridge
Two spacer plates
A.
B.
C.
Set the dial gauge on the level of the cylinder block face to “zero”.
Position the dial gauge at measuring points (C), at the piston pin axis on the piston and determine the
maximum projection.
Measuring points on the piston.
Distance X = 90 mm
This measurement is performed on each piston. The maximum measured piston projection determines the thickness of the
cylinder head gasket (see table). There are 3 different gasket thicknesses identified by bores (4):
1 bore = 1.2 mm
2 bores = 1.3 mm
3 bores = 1.4 mm
Piston projection
Piston projection Identification of cylinder head gasket
0.33 ~ 0.55 mm 1 bore
0.56 ~ 0.65 mm 2 bores
0.66 ~ 0.76 mm 3 bores
11. Service Information
Document Title: Function Group: Information Type: Date:
Fitting cylinder head 211 Service Information 2015/3/11
Profile:
EXC, EC160B LC [GB]
Fitting cylinder head
Prior to fitting the cylinder head onto the crankcase, the sealing surfaces for the cylinder head gasket must be clean
and free from oil. Pay attention to dowel sleeves.
Lightly oil the cylinder head bolts.
It is absolutely necessary to observe the bolt tightening order in the adjacent schematic.
Tightening order
Figure 1
Tightening order (exhaust manifold side)
Tightening specification:
1st step: 30 N·m (22.2 lbf·ft, 3.1 kgf·m)
2nd step: 80 N·m (59 lbf·ft, 8.2 kgf·m)
3rd step: 90° turn
12. Service Information
Document Title: Function Group: Information Type: Date:
Cylinder, description 213 Service Information 2015/3/11
Profile:
EXC, EC160B LC [GB]
Cylinder, description
Figure 1
Cylinder liner
1 Cylinder liner
2 Crankcase
3 Liner projection: 0.07 - 0.12 mm
D6D engine with a bore about 98 mm (3.86 in) is provided with dry, plateau-honed slip-fit cylinder liners. In case of damage,
the cylinders of the D6D series are repaired by replacing the slip-fit liners.
13. Service Information
Document Title: Function Group: Information Type: Date:
Pistons, description 213 Service Information 2015/3/11
Profile:
EXC, EC160B LC [GB]
Pistons, description
The pistons of the D6D engine are made of a special aluminium alloy. The piston bowl has a small amount of
eccentricity to the piston axis.
The piston must be installed so that flywheel symbol (1) on the piston top faces the flywheel.
The pistons are equipped with 3 piston rings. The 1st ring has a ring carrier (2) of cast iron.
The cross section of the 1st piston ring is asymmetrical. The cross section of the 2nd piston ring is conical
(compression ring). When installing the piston, the TOP mark at the ring gap must point upwards. The 3rd ring is
the bevelled-edge oil control ring.
14. Service Information
Document Title: Function Group: Information Type: Date:
Piston cooling 213 Service Information 2015/3/11
Profile:
EXC, EC160B LC [GB]
Piston cooling
Figure 1
Piston cooling
The piston is cooled by spraying lube oil against the inside of the piston top.
The 2-hole piston cooling nozzles made of plastic are fitted in the main bearing pedestals.
15. Service Information
Document Title: Function Group: Information Type: Date:
Valves, description 214 Service Information 2015/3/11
Profile:
EXC, EC160B LC [GB]
Valves, description
The engine is provided with one inlet and one exhaust valve per cylinder. The valve guides are shrunk in the
cylinder head. The valve seat inserts are made of high-quality steel and are also shrunk in the cylinder head.
The valves are turned by eccentric actuation through the rocker arms. The new compressed cone connection
permits easy turning of the valve despite stress load.
NOTE!
The valve springs of the D6D have a special installation direction. The colored mark on the spring must show to the
bottom.
Rocker arm lubrication is integrated in the lube oil circuit. The oil is supplied via tappets and push rods.
Valve seat angle
Inlet Exhaust
30° 45°
16. Service Information
Document Title: Function Group: Information Type: Date:
Valves, adjusting 214 Service Information 2015/3/11
Profile:
EXC, EC160B LC [GB]
Valves, adjusting
The valve clearance must be checked and adjusted at specified intervals. To do this, the engine oil temperature must be
between 20 °C (68 °F) and 80 °C (176 °F).
Valve clearance adjustment
Item mm inch
Inlet valve 0.3 0.012
Exhaust valve 0.5 0.020
Adjustment
Figure 1
Valve clearance, adjustment
1.
2.
3.
4.
Remove rocker cover.
Turn crankshaft until both valves in cylinder 1 overlap (Exhaust valve about to close, inlet valve about to open).
Adjust clearance of valves marked in black in figure. Mark respective rocker arm with chalk to show that adjustment
has been done.
Figure 2
Lock nut, tightening
Tighten down the lock nut to 20 N·m (15 lbf·ft) check the adjustment again with a feeler gauge.
17. 5.
6.
Figure 3
Valve clearance, adjustment
Turn crankshaft one full revolution (360°). Now adjust clearance of valves marked black in figure.
Install the valve cover together with a new gasket and tighten down the screws.
Tightening torque: 9 N·m (6.6 lbf·ft)
18. Service Information
Document Title: Function Group: Information Type: Date:
Crankshaft, description 216 Service Information 2015/3/11
Profile:
EXC, EC160B LC [GB]
Crankshaft, description
The forged crankshaft of the D6D engine is provided with integrated balance weights. The drive gear for the timing
gears and the flywheel flange are shrunk on.
Figure 2
Fillet radii on the bearing journal
The material microstructure of the fillet radii on the bearing journals is strengthened by rolling.
Remachining of the fillet radii is therefore not permissible.
Figure 3
Allowable repair limit
In case of repair, there is available one undersize of 0.25 mm (referred to the diameter) for the crank pins and main
bearing journals.
Figure 4
Allowable thrust bearing face repair limit
The thrust bearing face can only be remachined once (oversize: 0.4 mm, 0.2 mm each side).
Thrust bearing clearance of the crankshaft in installed condition: 0.1 to 0.28 mm (0.004 to 0.011 in).
19. Suggest:
If the above button click is invalid.
Please download this document
first, and then click the above link
to download the complete manual.
Thank you so much for reading
20. Service Information
Document Title: Function Group: Information Type: Date:
Connecting rod,
description
216 Service Information 2015/3/11
Profile:
EXC, EC160B LC [GB]
Connecting rod, description
The connecting rod of forged steel is fitted at the big end bearing bore with a balance weight (1) in order to
compensate the manufacturing tolerances with regard to weight and position of the center of gravity.
The number markings (A) on the big end eye and the bearing cap must be on one side and identical.
Locating lugs (2) are provided in the lower and upper bearing shells to prevent the bearing shells from rotating in
their seat; these lugs engage in oblong shaped grooves in the big end eye and big end bearing cap.
The piston must be so installed that the flywheel symbol (B) on the piston top faces the flywheel.
When assembling connecting rod and piston, the centering pins (3) for locating the connecting rod bearing cap
must be fitted on the upper face of the piston on the side of the flywheel symbol (B).
Figure 1
Connecting rod