VIDENT iLink400 multi-system scanner is very useful and capable device. saves data from vehicle. Powers on with OBD or USB port connected. Works on my 2010 Dodge Ram & my wife's 2015 Jeep Wrangler. both were throwing codes. This tool showed me the live data as well as the saved data from when the first error was seen. Has live testing where you can from inside the vehicle check to make sure everything works.

1. http://www.videntshop.com/
Vident iLink400 multi-system scanner reviews & FAQs
VIDENT iLink400 multi-system scanner is very useful and capable device. saves data
from vehicle. Powers on with OBD or USB port connected.
Works on my 2010 Dodge Ram & my wife's 2015 Jeep Wrangler. both were throwing
codes. This tool showed me the live data as well as the saved data from when the first
error was seen. Has live testing where you can from inside the vehicle check to make sure
everything works.
Case: Works Well in Land Rover L319 2006
Select the car: 2006 Land Rover L319

2. http://www.videntshop.com/

3. http://www.videntshop.com/

4. http://www.videntshop.com/
Land Rover diagnosis using Vident iLink400

5. http://www.videntshop.com/

6. http://www.videntshop.com/
Read and clear fault codes

7. http://www.videntshop.com/

8. http://www.videntshop.com/

9. http://www.videntshop.com/

10. http://www.videntshop.com/

11. http://www.videntshop.com/
Read live data in numbers and graphs

12. http://www.videntshop.com/

13. http://www.videntshop.com/

14. http://www.videntshop.com/

15. http://www.videntshop.com/

16. http://www.videntshop.com/
Vident iLink400 hot functions...just share some images....not tested yet

17. http://www.videntshop.com/

18. http://www.videntshop.com/

19. http://www.videntshop.com/

20. http://www.videntshop.com/
Vident iLink400 service....also not tested yet

21. http://www.videntshop.com/

22. http://www.videntshop.com/

23. http://www.videntshop.com/

24. http://www.videntshop.com/
FAQ:
Q: is the software open for all car manufactures or need to buy software for each car
manufactures?
A: It comes with one free software. You are allowed to add up to 5 manufacturers
programs. Each additional one is 60 dollars.
Q: Will VIDENT iLink400 support abs bleeding on a 1999 ford e350 super duty?
A: Yes.
Q: programs key for 98 taurus?
A: No.
Q: How to download software for my iLink400 ?
A: Brief Guide —
1. Install update client. Download the update client from official site or from the CD comes
in the product package. And install it.
2. Creat a Vident ID. Create your Vident ID either on the update client iScanzilla or official
site.
3. Register the scanner. Register your scan tool with the update client iScanzilla
4. Connect the TF card with computer. Remove the TF card from the tool and connect
with a windows computer through the card reader provided.
5. Download software. Log in iScanzilla to download all available software onto the TF
card.
Click here to view a step by step guide
http://www.videntshop.com/upload/pro/vident-ilink400-single-make-full-system-scan-tool-
user-manual.pdf
Q: The vehicle program is not authorized. Please obtain the authorization
A: If you have more than one Vident scanners, please make sure the TF cards are not
mixed up.
If you get the message after updating your scan tool, please make sure you selected the
right serial number while updating the scanner. Please try to format the TF card and
update the OS (operation system) only. Put the TF card back to the scanner and boot up
the scanner to check if the message pop up again. If not, try to update all the rest files
from iScanzilla. If the message pops up again, please send the product serial number and
password to sales@videntshop.com with a brief explanation of the problem you have.
Q: Does my VIDENT iLink400 scanner support any other languages besides the initial
language?
A: Only two language is pre-installed for
iLink400/410/440/450/iAuto700/iAuto710/iSmart900. If you need to access any other
language, which is listed in the language menu, please email to sales@videntshop.com to
obtain authorization.

25. http://www.videntshop.com/
Q: How to check the register serial Number and password of iLink400?
A: Please connect the VIDENT iLink400 scanner with a computer with the USB cable
provided to boots up it and select Setup from the main menu on the scanner. Then select
About to check the register serial number and password.
Here below is for example only. Please do NOT user S/N# 7000315001361 to register.

26. http://www.videntshop.com/
Q: What should I do if VIDENT iLink400 shows "The serial number does not exist" when
registering the product?
A: Please make sure the serial number and registered password you input are correct.
Please pay special attention to letter "O" and number "0" and letter "I" and number "1" also.
Even though there is a serial number on the back label, please always use the one you
found by selecting Setup>About.
Make sure there is no blank space before/between/after the digits you input.
If the registration still fails, please send the product serial number and password, which
can be found by booting up the scanner, selecting Setup >About, to
sales@videntshop.com with a brief explanation of the problem you have. We will check
and get back to you with a solution in 2 business day.