1. Vacuum X is specially
designed for Vacuum
Conveying Systems for
Powder, Granules & Similar
Process Materials
EmbTrans® Inc. EmbTrans® Inc.
Vacuum Conveying is the ideal Vacuum X
solution for the contained transfer of
powder, granules and similar process EmbTrans® Inc.
materials. Pharmaceutical, chemical ph +92 (21) 3460.0344
and allied industries are at the moment cell +92 (333) 300.7179
switching to vacuum conveying +92 (300) 293.4950
@ info@embtrans.com
because it automates &optimizes the www.embtrans.com
process, it is easy to clean & it makes
the workplace less Hazardous.
It eliminates the problems associated
with manual feeding such as powder
spillage, airborne dust and also
removes the need to handle heavy
equipment such as drums, kegs &
bags.
EmbTrans® Inc.
Engineering, IT & Business
Services & Solutions Provider

2. The Unloading (Discharge) Cycle
Once the hopper is full (controlled by timer)
vacuum is relieved and the discharge valve at the
base of the vacuum hopper opens. Material then
falls by gravity to the receiving container situated
Why Vacuum X
below. During the unloading of material ‘discharge
cycle’ a reverse jet compressed air blast cleans
the filter in the lid of the hopper. An option is • Improved Dust Free
available to use a bag shaker mechanism in place
Environment
of the reverse jet air blast. At the end of the
discharge cycle the system automatically resets to
continue on with the next convey cycle.
• Virtually No moving Parts
• Easy To Clean Design
VACUUM X
• Reduced Operator Fatigue
Vacuum X can be integrated with any
semiautomatic or automatic Vacuum Transfer
system that requires transfer of powder, granules
and similar process materials. • Increased Output &
Efficiency
It eliminates the problems associated with manual
feeding such as powder spillage, airborne dust
and also removes the need to handle heavy
equipment such as drums, kegs & bags. • Minimal Product Losses
The Loading Cycle
Material is sucked into the vacuum hopper by • Design According To The
using a hand held vacuum wand or feed-bin
arrangement. During the loading or ‘convey cycle’
User Requirement
vacuum is drawn on the vacuum hopper lid
through a filter, thus drawing the material to be
conveyed into the vacuum hopper chamber.
Vacuum is present throughout the loading cycle
and interrupted only during the unloading cycle.
The outlet or ‘discharge-valve’ remains closed
during the loading phase.