The document contains questions about mobile telecommunication networks. It tests knowledge in several areas:
1) Network components such as the BTS, BSC, MSC, HLR, VLR and their functions.
2) Signaling systems like CCS7 and protocols like LAPD.
3) Radio interface technologies including GSM, DCS, TDMA, frequency channels.
4) Mobility management procedures like authentication, location update, and handover.
5) Identification numbers and parameters used like IMSI, TMSI, LAC, CGI for subscriber and network identification.
This document provides standards and guidelines for engineering drawings at NASA's Goddard Space Flight Center (GSFC). It defines drawing elements such as sizes, formats, and zoning. It also describes drawing nomenclature including titles, abbreviations, notes, and specifications. Drafting practices for lines, lettering, scales, views and other elements are covered. Types of drawings such as assemblies, details, schematics and others are defined. The numbering system, documentation management, and references to other standards are also summarized.
The document contains questions about mobile telecommunication networks. It tests knowledge in several areas:
1) Network components such as the BTS, BSC, MSC, HLR, VLR and their functions.
2) Signaling systems like CCS7 and protocols like LAPD.
3) Radio interface technologies including GSM, DCS, TDMA, frequency channels.
4) Mobility management procedures like authentication, location update, and handover.
5) Identification numbers and parameters used like IMSI, TMSI, LAC, CGI for subscriber and network identification.
This document provides standards and guidelines for engineering drawings at NASA's Goddard Space Flight Center (GSFC). It defines drawing elements such as sizes, formats, and zoning. It also describes drawing nomenclature including titles, abbreviations, notes, and specifications. Drafting practices for lines, lettering, scales, views and other elements are covered. Types of drawings such as assemblies, details, schematics and others are defined. The numbering system, documentation management, and references to other standards are also summarized.
2. ข้อมูลจาเพาะเครื่องตัดสติกเกอร์ TS Super Cut Series ( TS1300X)
รุ่น/หน้ากว้าง /1300 มม./และ 74 มม.
TS1300 TS1300M TS1300A
TS74 TS74M TS74A
ตัดสติกเกอร์ OK OK OK
ไดคัทสติกเกอร์พิมพ์ - OK OK
อ่านมาคส์แมนนวล - OK -
อ่านมาคส์อัตโนมัติ - - OK
120 ซม. 120 ซม. 120 ซม.
ขนาดกว้างสุดที่ตัดได้
63 ซม. 63 ซม. 63 ซม.
ขาตั้ง OK OK OK
ใบมีด 3 ใบ OK OK OK
ปากกาพล๊อตแบบ OK OK OK
ตัดตรงจาก Coreldraw OK OK OK
ตัดตรงจาก Illustrator OK OK OK
ไดคัทซอฟแวร์ Flexi 10 OK OK -
ตัดตรงจากแฟรชไดร์ OK OK OK
ความละเอียดในการตัด 0.005 มม. 0.005 มม. 0.005 มม.
การรับประกัน 1 ปี OK OK OK
ฟรีอะไหล่และบริการปีแรก
3. บริการให้ดาวน์โหลดโดยคลิ๊กตามลิงค์ดานล่าง (ทั้งหมดนี้มีให้อยู่ในรูป CD Rom ตอนซื้ออยู่แล้วยกเว้น
้
โปรแกรม TeamViewer)
- USB Driver สาหรับเครื่องตัด TS Super Cut Series - คู่มือการติดตั้ง USB Driver
- Plugin Illustrator CS5 คู่มอการติดตั้ง
ื
- Plugin Coreldraw X5 คู่มือการติดตั้ง
- คู่มือเครื่องตัด
- รูปการประกอบขาตั้ง
- โปรแกรม TeamViewer สาหรับให้ทางฝ่ายบริการช่วยแก้ไขปัญหา online
3 ขั้นตอนง่ายๆของ การทา contour dicut งานพิมพ์ ของ Software Flexi 10 ที่ธุรกิจของคุณไม่ควรพลาด..!