The Advanced Reservoir Engineering Course course addresses modern practical aspects of Reservoir Engineering during 5-days packed with 7 hours of lectures, classroom exercises, discussions and literature reviews.
At the end of the Advanced Course participants will have a deeper knowledge of modern reservoir engineering principles and practices for reservoir development and production, including the estimation of oil and gas reserves. They will also have an awareness of the construction and use of reservoir models.
This course is intended for staff that have had prior exposure to exploration and production activities. Target categories of staff include Production and Reservoir Engineers, Petrophysicists, Geologists and Engineers involved with exploration and development of oil and gas reservoirs. The course is also useful for Petroleum Engineering team leaders, Production staff, IT staff and support staff working with Reservoir Engineering and development and production. Reservoir Engineers with a few years practical experience and Petroleum Engineers and Geoscientists that require more than general knowledge of reservoir engineering.
Participant’s understanding of fundamental concepts and modern practical reservoir engineering methods will be deepened and a wide range of topics is addressed.
Course topics include detailed treatment of PVT, oil and gas material balance methods, well modelling and well testing, SPE and SEC reserves estimation, displacement theory, reservoir and simulation modeling, fractured reservoirs, decline curve analysis, field development planning and production forecasting.
The Advanced Reservoir Engineering Course course addresses modern practical aspects of Reservoir Engineering during 5-days packed with 7 hours of lectures, classroom exercises, discussions and literature reviews.
At the end of the Advanced Course participants will have a deeper knowledge of modern reservoir engineering principles and practices for reservoir development and production, including the estimation of oil and gas reserves. They will also have an awareness of the construction and use of reservoir models.
This course is intended for staff that have had prior exposure to exploration and production activities. Target categories of staff include Production and Reservoir Engineers, Petrophysicists, Geologists and Engineers involved with exploration and development of oil and gas reservoirs. The course is also useful for Petroleum Engineering team leaders, Production staff, IT staff and support staff working with Reservoir Engineering and development and production. Reservoir Engineers with a few years practical experience and Petroleum Engineers and Geoscientists that require more than general knowledge of reservoir engineering.
Participant’s understanding of fundamental concepts and modern practical reservoir engineering methods will be deepened and a wide range of topics is addressed.
Course topics include detailed treatment of PVT, oil and gas material balance methods, well modelling and well testing, SPE and SEC reserves estimation, displacement theory, reservoir and simulation modeling, fractured reservoirs, decline curve analysis, field development planning and production forecasting.
1. УВЕДОМЛЕНИЕ
О ЗАВЕРШЕНИИ РАССМОТРЕНИЯ ПРОЕКТА
ГОСУДАРСТВЕННОГО СТАНДАРТА РЕСПУБЛИКИ БЕЛАРУСЬ
«Нефтепродукты. Определение температуры текучести»
1 Разработчик: НП РУП «Белорусский государственный
институт стандартизации и сертификации»
ул. Мележа, 3, г. Минск, 220113
Телефон: (+ 375 17) 262 16 01
Факс: (+ 375 17) 262 15 20
E-mail: belgiss@mail.belpak.by
http://www.belgiss.org.by
2 Ответственный орган: Госстандарт Республики Беларусь (04100)
3 Наименование проекта: «Нефтепродукты. Определение
температуры текучести».
4 Объект стандартизации: Метод определения температуры
текучести нефтепродуктов
МКС 75.100
5 Обоснование разработки: Установление метода определения
температуры текучести нефтепродуктов в
соответствии с требованиями
АСТМ Д 97-04 с целью исключения
технических барьеров в торговле и
повышения конкурентоспособности
продукции.
Гармонизация с требованиями стандарта
АСТМ Д 97-04.
6 Аналог международного
(регионального) документа
АСТМ Д 97-04 Нефтепродукты.
Определение температуры текучести
нефтепродуктов.
ASTM D 97-04 Standard Test Method for
Pour Point of Petroleum Products.
7 Требования, отличающиеся от
международного
(регионального) документа
Требования отличающиеся отсутствуют,
степень соответствия идентичная (IDT)
8 Окончательную редакцию
проекта можно получить:
E-mail: belgiss@mail.belpak.by
9 Предполагаемая дата:
- рассмотрения на НТК
- утверждения
государственного стандарта
- введения в действие
2005-25-05.
2006-01-01
2. государственного стандарта
Ответственный за составление
уведомления:
НП РУП «Белорусский государственный
институт стандартизации и сертификации»
ул. Мележа, 3, г. Минск, 220133
Телефон: (+ 375 17) 262 16 01
Факс: (+ 375 17) 262 15 20
E-mail: belgiss@mail.belpak.by
http://www.belgiss.org.by
Морозова Н.И.
Дата составления уведомления: 12.04.2005
Директор БелГИСС ______________
подпись
Н.А. Кусакин
Заместитель директора
по стандартизации
______________
подпись
В.Л. Гуревич