This document analyzes three probable weapons storage areas in Kabul, Afghanistan from imagery taken on May 14, 2010. Area A is described as having dimensions of approximately 120m wide, 150m high, and 9m wall height. It contains 20 storage containers and vehicles. Area B has dimensions of 75-95m wide, 84-132m high, and contains 50 storage crates and 13 containers. Area C is approximately 80m wide, 102m high, with a 3.5m wall, and contains storage containers and vehicles guarded by a tower.
Model transformations based on the integration of TGG and OCLddhanh
Triple graph grammars (TGGs) can be used to specify model transformations and support three transformation scenarios: model co-evolution, forward transformation, and backward transformation. TGGs relate a source and target metamodel and specify how models conforming to these metamodels can be incrementally transformed via correspondence rules.
Analyzing radiation pattern, S11 parameters & other important factors that define antenna performance on HFSS software. Feel free to ask any queries. Do like the post if its worthy enough.
This document discusses the anatomy and operation of a triac, which is a type of thyristor used to control AC power. A triac is able to conduct current in either direction when its gate receives a trigger signal, allowing it to control both halves of the AC cycle. It can operate in any of its four quadrants depending on the polarity of the voltage across it and the direction of current flowing through it. The gate trigger must be applied during a small conduction window for the triac to change states.
This document summarizes the work of team 2 from the CHiMaD Phase Field Methods Workshop III & Hackathon in May 2016. It addresses two questions on phase field simulations. For question 1, it presents results on tip velocity versus time for different mesh sizes from a phase field crystal solidification simulation. For question 2, it shows the results of a Cahn-Hilliard simulation of an initialized cube relaxing to a sphere, including a plot of energy over time and details on implementation.
[論文紹介] PARANMT-50M- Pushing the Limits of Paraphrastic Sentence Embeddings wi...Hiroki Shimanaka
The document summarizes research on PARANMT-50M, a new paraphrastic sentence embedding model. The model was created by training an LSTM on 50 million English-Czech machine translation pairs to map sentences to a shared vector space where semantic similarity is represented by vector similarity. Evaluation shows the embeddings achieve state-of-the-art results on semantic textual similarity tasks, outperforming prior models trained on smaller datasets. The researchers believe the improved performance is due to the large scale machine translation training data used to generate the embeddings.
The document is an engineering drawing for an iso-compressor consisting of 20 labeled parts. It includes three views of the assembly (sections A-A, C-C, and detail D) along with a bill of materials listing each part's description, manufacturer, and quantity. Dimensioned details are provided for sections B and C.
This document appears to be notes from an R tutorial or course. It includes links to resources about statistics careers, mapping airline data with R, and R's growth. It also includes code examples for importing and exploring data, performing statistical tests, visualizing distributions, and more. Later sections discuss R packages, Shiny, APIs, the R community, installing R, using RStudio, and taking an online R course with swirl.
The document describes a C++ program that implements a Karnaugh map to simplify boolean algebra expressions. The program takes in 16 binary inputs from the user, arranges them in a 4x4 Karnaugh map table, and checks for combinations of 1s in order to output a simplified boolean expression. If no combinations are found, it outputs 0.
Model transformations based on the integration of TGG and OCLddhanh
Triple graph grammars (TGGs) can be used to specify model transformations and support three transformation scenarios: model co-evolution, forward transformation, and backward transformation. TGGs relate a source and target metamodel and specify how models conforming to these metamodels can be incrementally transformed via correspondence rules.
Analyzing radiation pattern, S11 parameters & other important factors that define antenna performance on HFSS software. Feel free to ask any queries. Do like the post if its worthy enough.
This document discusses the anatomy and operation of a triac, which is a type of thyristor used to control AC power. A triac is able to conduct current in either direction when its gate receives a trigger signal, allowing it to control both halves of the AC cycle. It can operate in any of its four quadrants depending on the polarity of the voltage across it and the direction of current flowing through it. The gate trigger must be applied during a small conduction window for the triac to change states.
This document summarizes the work of team 2 from the CHiMaD Phase Field Methods Workshop III & Hackathon in May 2016. It addresses two questions on phase field simulations. For question 1, it presents results on tip velocity versus time for different mesh sizes from a phase field crystal solidification simulation. For question 2, it shows the results of a Cahn-Hilliard simulation of an initialized cube relaxing to a sphere, including a plot of energy over time and details on implementation.
[論文紹介] PARANMT-50M- Pushing the Limits of Paraphrastic Sentence Embeddings wi...Hiroki Shimanaka
The document summarizes research on PARANMT-50M, a new paraphrastic sentence embedding model. The model was created by training an LSTM on 50 million English-Czech machine translation pairs to map sentences to a shared vector space where semantic similarity is represented by vector similarity. Evaluation shows the embeddings achieve state-of-the-art results on semantic textual similarity tasks, outperforming prior models trained on smaller datasets. The researchers believe the improved performance is due to the large scale machine translation training data used to generate the embeddings.
The document is an engineering drawing for an iso-compressor consisting of 20 labeled parts. It includes three views of the assembly (sections A-A, C-C, and detail D) along with a bill of materials listing each part's description, manufacturer, and quantity. Dimensioned details are provided for sections B and C.
This document appears to be notes from an R tutorial or course. It includes links to resources about statistics careers, mapping airline data with R, and R's growth. It also includes code examples for importing and exploring data, performing statistical tests, visualizing distributions, and more. Later sections discuss R packages, Shiny, APIs, the R community, installing R, using RStudio, and taking an online R course with swirl.
The document describes a C++ program that implements a Karnaugh map to simplify boolean algebra expressions. The program takes in 16 binary inputs from the user, arranges them in a 4x4 Karnaugh map table, and checks for combinations of 1s in order to output a simplified boolean expression. If no combinations are found, it outputs 0.
TC SMART MAPS - A 10 Years Journey with FMESafe Software
Transport Canada (TC) SMART MAPS is a comprehensive collection of over 300 GB of vector Kml data ranging from Safety & Security, Marine, Air and Rail Transportation (SMART). With over 100 unique map layers, this one-stop geospatial portal is used by various TC Departments including Marine Group, Aviation Group, Programs/Policy Group, and Surface Group (MAPS), enabling Policy Makers, Regulators, Inspectors and Enforcement Officers alike to collaborate, work smarter and make better business decisions.
This single line diagram shows the electrical infrastructure for the Scholl Canyon Landfill Power Plant. It includes 4 generators labeled GEN-1 and connects them to the Scholl Canyon Substation. The diagram is included in Appendix C of the document.
A novel geometric and analytic technique for thesingularity analysis of one-...Ashish Khetan
This presentation discusses techniques for analyzing singularities in one degree-of-freedom planar mechanisms. It introduces three types of singularities - Type I, II, and III. Type I occurs when the input reaches its range limit. Type II occurs when the output reaches its limit. Type III occurs when the instantaneous input-output relationship breaks down. The presentation describes using the instantaneous center of rotation method to analyze singularities in four-bar linkages. It provides equations relating the instantaneous centers that can be used to determine the different singularity types. Analyzing singularities is important for mechanism design to achieve the desired output motion.
This document discusses forward kinematics for single link, double link, and three link robotic arms as well as SCARA robots. It also provides MATLAB toolbox commands for defining the kinematic chains of different robot configurations and obtaining their transformations.
This document provides information to draw an Activity-On-Node (AON) network and Gantt chart for a construction project. It lists 9 activities with their successors, durations, and constraints. The tasks are to: 1) Draw the AON and AOA networks, 2) Determine the critical path and total time, 3) Calculate the early start, early finish, late start, late finish, total float, and free float for each activity, and 4) Draw a Gantt chart showing only non-critical activities.
This drawing shows details of a trolley wheel, including dimensions and notes. It was drawn by K. Thorpe on October 30, 2014 for Central Carolina Technical College's Engineering Graphics Technology program. The drawing depicts the profile of a wheel with various radii, diameters, and other geometric specifications.
This technical drawing shows the side plate of a trolley, including dimensions and hole specifications. It was drawn by K. Thorpe on October 2, 2014 for Central Carolina Technical College's Engineering Graphics Technology program. The drawing is number 3 of 8 for the trolley project.
This document summarizes an investigation of the sedimentology and stratigraphy of sediments at the Cleo-Meyer Farm in Little Falls, MN. Eleven unique sediment layers were identified and samples from each layer were analyzed. Grain size analysis identified the dominant lithologies in each layer. The sediments were determined to be outwash and till deposits associated with the St. Croix or Wadena moraines, with incorporated Superior lobe till and outwash. These sediments were deposited by various glacial processes as ice lobes retreated from the area.
Glass is an amorphous solid that is often transparent and used in windows, tableware, and electronics. It comes in types like annealed, toughened, laminated, coated, mirrored, patterned, and extra clear glass. Ceramics are inorganic, nonmetallic materials essential to daily life that ceramic engineers design processes for and create new types of ceramic products and uses.
Productivity is calculated by dividing total units produced by hours worked. It is important for controlling labor costs and efficient operations. An example shows 402 units produced over 43 hours worked, for a productivity of 9.3. Speed is important to productivity, as it increases units produced per hour. Labor percentage is calculated by dividing total weekly wages by net sales. Scheduling and preparation directly affect productivity by staffing appropriately for peak periods and having the restaurant organized and ready for rushes. Motivation also impacts productivity, as positive techniques like training and incentives energize staff to work efficiently towards goals.
This field report summarizes the stratigraphy and oil trapping mechanisms of the J Sandstone in Kimball County, Nebraska. The J Sandstone consists of three members deposited in different environments: the lower J2 was deposited in shallow marine conditions, the overlying J1 indicates a transgression and was also deposited in shallow marine conditions, and the upper valley-fill member represents fluvial deposition. Stratigraphic traps within lenticular sandstone bodies and shale barriers, as well as structural traps associated with anticlines, control oil accumulation. Maps produced for this study indicate both stratigraphic and structural traps exist in the area that could be suitable for additional exploration and drilling.
Este documento lista varias herramientas digitales para publicar texto, presentaciones, video y audio. Algunas opciones para publicar texto y presentaciones incluyen Calameo, Scribd e Issuru, mientras que YouTube, Vimeo, Veoh y DailyMotion son sugeridas para video. Opciones para audio público son Ivoox y Spreaker.
Counterintelligence has a long history in the United States dating back to the American Revolutionary War. Early figures like George Washington utilized deception and spies to gain intelligence on the British. During the Civil War, Allan Pinkerton established the first U.S. counterintelligence agency. World War I saw the development of the U.S. military and naval intelligence branches. During the Cold War and Red Scare periods, fears of communist infiltration led to expanded FBI counterintelligence efforts that uncovered several Soviet espionage rings stealing U.S. atomic secrets. Counterintelligence continues to be vital to protect U.S. national security from foreign threats.
This document discusses productivity and labor costs in restaurants. It defines productivity as the average number of units sold per hour worked and explains why maintaining high productivity through efficient operations and well-trained staff is important to control labor costs. Scheduling employees appropriately based on expected sales volumes throughout the day and week is key to achieving optimal productivity levels between 8-12 units per hour. Motivating employees through positive techniques like training, healthy competition, and communication can help create a productive workforce.
Ragam hias merupakan pola dasar yang diulang pada karya seni dan kerajinan. Ragam hias tekstil tradisional Indonesia memiliki makna dan fungsi yang beragam, seperti untuk kebutuhan sandang, alat bantu, dan ritual adat. Contoh ragam hias tekstil tradisional adalah kain tenun dan kain yang digunakan dalam upacara adat seperti ulos dan poleng.
TC SMART MAPS - A 10 Years Journey with FMESafe Software
Transport Canada (TC) SMART MAPS is a comprehensive collection of over 300 GB of vector Kml data ranging from Safety & Security, Marine, Air and Rail Transportation (SMART). With over 100 unique map layers, this one-stop geospatial portal is used by various TC Departments including Marine Group, Aviation Group, Programs/Policy Group, and Surface Group (MAPS), enabling Policy Makers, Regulators, Inspectors and Enforcement Officers alike to collaborate, work smarter and make better business decisions.
This single line diagram shows the electrical infrastructure for the Scholl Canyon Landfill Power Plant. It includes 4 generators labeled GEN-1 and connects them to the Scholl Canyon Substation. The diagram is included in Appendix C of the document.
A novel geometric and analytic technique for thesingularity analysis of one-...Ashish Khetan
This presentation discusses techniques for analyzing singularities in one degree-of-freedom planar mechanisms. It introduces three types of singularities - Type I, II, and III. Type I occurs when the input reaches its range limit. Type II occurs when the output reaches its limit. Type III occurs when the instantaneous input-output relationship breaks down. The presentation describes using the instantaneous center of rotation method to analyze singularities in four-bar linkages. It provides equations relating the instantaneous centers that can be used to determine the different singularity types. Analyzing singularities is important for mechanism design to achieve the desired output motion.
This document discusses forward kinematics for single link, double link, and three link robotic arms as well as SCARA robots. It also provides MATLAB toolbox commands for defining the kinematic chains of different robot configurations and obtaining their transformations.
This document provides information to draw an Activity-On-Node (AON) network and Gantt chart for a construction project. It lists 9 activities with their successors, durations, and constraints. The tasks are to: 1) Draw the AON and AOA networks, 2) Determine the critical path and total time, 3) Calculate the early start, early finish, late start, late finish, total float, and free float for each activity, and 4) Draw a Gantt chart showing only non-critical activities.
This drawing shows details of a trolley wheel, including dimensions and notes. It was drawn by K. Thorpe on October 30, 2014 for Central Carolina Technical College's Engineering Graphics Technology program. The drawing depicts the profile of a wheel with various radii, diameters, and other geometric specifications.
This technical drawing shows the side plate of a trolley, including dimensions and hole specifications. It was drawn by K. Thorpe on October 2, 2014 for Central Carolina Technical College's Engineering Graphics Technology program. The drawing is number 3 of 8 for the trolley project.
This document summarizes an investigation of the sedimentology and stratigraphy of sediments at the Cleo-Meyer Farm in Little Falls, MN. Eleven unique sediment layers were identified and samples from each layer were analyzed. Grain size analysis identified the dominant lithologies in each layer. The sediments were determined to be outwash and till deposits associated with the St. Croix or Wadena moraines, with incorporated Superior lobe till and outwash. These sediments were deposited by various glacial processes as ice lobes retreated from the area.
Glass is an amorphous solid that is often transparent and used in windows, tableware, and electronics. It comes in types like annealed, toughened, laminated, coated, mirrored, patterned, and extra clear glass. Ceramics are inorganic, nonmetallic materials essential to daily life that ceramic engineers design processes for and create new types of ceramic products and uses.
Productivity is calculated by dividing total units produced by hours worked. It is important for controlling labor costs and efficient operations. An example shows 402 units produced over 43 hours worked, for a productivity of 9.3. Speed is important to productivity, as it increases units produced per hour. Labor percentage is calculated by dividing total weekly wages by net sales. Scheduling and preparation directly affect productivity by staffing appropriately for peak periods and having the restaurant organized and ready for rushes. Motivation also impacts productivity, as positive techniques like training and incentives energize staff to work efficiently towards goals.
This field report summarizes the stratigraphy and oil trapping mechanisms of the J Sandstone in Kimball County, Nebraska. The J Sandstone consists of three members deposited in different environments: the lower J2 was deposited in shallow marine conditions, the overlying J1 indicates a transgression and was also deposited in shallow marine conditions, and the upper valley-fill member represents fluvial deposition. Stratigraphic traps within lenticular sandstone bodies and shale barriers, as well as structural traps associated with anticlines, control oil accumulation. Maps produced for this study indicate both stratigraphic and structural traps exist in the area that could be suitable for additional exploration and drilling.
Este documento lista varias herramientas digitales para publicar texto, presentaciones, video y audio. Algunas opciones para publicar texto y presentaciones incluyen Calameo, Scribd e Issuru, mientras que YouTube, Vimeo, Veoh y DailyMotion son sugeridas para video. Opciones para audio público son Ivoox y Spreaker.
Counterintelligence has a long history in the United States dating back to the American Revolutionary War. Early figures like George Washington utilized deception and spies to gain intelligence on the British. During the Civil War, Allan Pinkerton established the first U.S. counterintelligence agency. World War I saw the development of the U.S. military and naval intelligence branches. During the Cold War and Red Scare periods, fears of communist infiltration led to expanded FBI counterintelligence efforts that uncovered several Soviet espionage rings stealing U.S. atomic secrets. Counterintelligence continues to be vital to protect U.S. national security from foreign threats.
This document discusses productivity and labor costs in restaurants. It defines productivity as the average number of units sold per hour worked and explains why maintaining high productivity through efficient operations and well-trained staff is important to control labor costs. Scheduling employees appropriately based on expected sales volumes throughout the day and week is key to achieving optimal productivity levels between 8-12 units per hour. Motivating employees through positive techniques like training, healthy competition, and communication can help create a productive workforce.
Ragam hias merupakan pola dasar yang diulang pada karya seni dan kerajinan. Ragam hias tekstil tradisional Indonesia memiliki makna dan fungsi yang beragam, seperti untuk kebutuhan sandang, alat bantu, dan ritual adat. Contoh ragam hias tekstil tradisional adalah kain tenun dan kain yang digunakan dalam upacara adat seperti ulos dan poleng.
1. PROB WEAPONS STOR AREAA
KABUL, AF
BE:1234567890
GEO:343407N0691125E
MGRS:42SWD174538252218
UNCLASSIFIED
ANALYIST:LM
IMAGERY DATE:05142010
OVERVIEW GRAPHIC:1 OF 3
UNCLASSIFIED
2. FACILITY DIMENSIONS
APROX WIDTH 120 M
APROX HEIGHT 150 M
APROX WALL HEIGHT 9 M
UNCLASSIFIED
UNCLASSIFIED
ANALYIST:LM
IMAGERY DATE:05142010
CLOSE UP GRAPHIC:2 OF 3
ECP
20 X STORAGE CNTR
8 X CGO TRK
16 X STORAGE CNTR
EP
EP
PROB WEAPONS STOR AREAA
KABUL, AF
BE:1234567890
GEO:343407N0691125E
MGRS:42SWD174538252218
EP
3. 5 X CGO TRK
16 X PKUP TRK
6 X PKUP TRK
4 X POS SUV
24 X POS SUV
UNCLASSIFIED
ANALYIST:LM
IMAGERY DATE:05142010
CLOSE UP GRAPHIC:3 OF 3
UNCLASSIFIED
PROB WEAPONS STOR AREAA
KABUL, AF
BE:1234567890
GEO:343407N0691125E
MGRS:42SWD174538252218
4. PROB WEAPONS STOR AREA B
KABUL, AF
BE:1234567890
GEO:343352N0691143E
MGRS:42SWD179133247607
UNCLASSIFIED
ANALYIST:LM
IMAGERY DATE:05142010
OVERVIEW GRAPHIC:1 OF 2
UNCLASSIFIED
5. PROB WEAPONS STOR AREA B
KABUL, AF
BE:1234567890
GEO:343407N0691012E
MGRS:42SWD155938252185
UNCLASSIFIED
UNCLASSIFIED
ANALYIST:LM
IMAGERY DATE:05142010
CLOSE UP GRAPHIC:2 OF 2
ECP
CGO TRK
3 X CGO TRK
3 X CGO TRK
APROX 50 STOR CRATE/ CONTAINER
13 STOR CONTAINER
FACILITY DIMENSIONS
APROX WIDTH 75 M AND 95 M
APROX HEIGHT 84 M AND 132 M
6. PROB WEAPONS STOR AREA C
KABUL, AF
BE:1234567890
GEO:343407N0691012E
MGRS:42SWD155938252185
UNCLASSIFIED
ANALYIST:LM
IMAGERY DATE:05142010
OVERVIEW GRAPHIC:1 OF 2
UNCLASSIFIED
7. ECP
GUARD TOWER
3 X CGO TRK
2 X PKUP TRK
6 X STOR CNTNR 9 X CGO TRK
9 X PKUP TRK
PROB WEAPONS STOR AREA C
KABUL, AF
BE:1234567890
GEO:343407N0691012E
MGRS:42SWD155938252185
UNCLASSIFIED
ANALYIST:LM
IMAGERY DATE:05142010
CLOSE UP GRAPHIC:2 OF 2
FACILITY DIMENSIONS
APROX WIDTH 80 M
APROX HEIGHT 102 M
APROX WALL HEIGHT 3.5 M
UNCLASSIFIED
ECP