This is a breakout board for SIM908-C GSM/GPS/GPRS combo module With a small double rail for the placement of the Modem, a connector for SIM and all other necessary pin outs.
This module features an LM35 temperature sensor with necessary pin out. The LM35 series are precision integrated-circuit temperature sensors, whose output voltage is linearly proportional to the Celsius (Centigrade) temperature.
Connect the VCC and GND pins with VCC and GND of your circuit and measure the voltage from the Out pin to see the variation of temperature.
Interface this set of push buttons with your desired device . Suppose ,you want to move a text displayed in an LCD display to four different directions, Or turn on four LEDs by pressing four different switches. For these kind of tusks you can easily connect this module with your microontroller, arduino or any other development board and control your desired device.
This document provides contact information for L298 brakeout board from techshopbd, including their website and phone number. The board allows controlling DC motors and their direction of rotation using an Arduino or other microcontroller.
Our 2 Channel 5V relay module comes with two on board 5V relays with all necessary pin outs. You can control two AC loads simultaneously using this module. Can be interfaced with Microcontroller and Arduino.
This module features an LM35 temperature sensor with necessary pin out. The LM35 series are precision integrated-circuit temperature sensors, whose output voltage is linearly proportional to the Celsius (Centigrade) temperature.
Connect the VCC and GND pins with VCC and GND of your circuit and measure the voltage from the Out pin to see the variation of temperature.
Interface this set of push buttons with your desired device . Suppose ,you want to move a text displayed in an LCD display to four different directions, Or turn on four LEDs by pressing four different switches. For these kind of tusks you can easily connect this module with your microontroller, arduino or any other development board and control your desired device.
This document provides contact information for L298 brakeout board from techshopbd, including their website and phone number. The board allows controlling DC motors and their direction of rotation using an Arduino or other microcontroller.
Our 2 Channel 5V relay module comes with two on board 5V relays with all necessary pin outs. You can control two AC loads simultaneously using this module. Can be interfaced with Microcontroller and Arduino.
This module features eight on board push button switches in a single board. Just connect it to your breadboard or any other platform and control 8 loads simultaneously.
Students often faces difficulties in fiiguring out the pins of seven segment displays.This module features a 4 digit, Red, common anode 7 segment display with all necessery pinouts. All pins that are needed to glow a particular segement and digit are clearly marked which saves your time and labour.
Note: In this module the common pins of the four digits of the 7 segment are switched by four PNP transistors. So, you have to give logic 0 to S1-S4 pins to make the corresponding digit glow. For further clarification, you are requested to check the tutorial given in the 'Documents' section.
LCD module features an on board 16x2 LCD with necessary pin out to connect it to your project board.
If also has a POT by which you can control the LCD contrast and a back light On-Off switch.
This breakout board comes with an On board RN-42 Bluetooth module with all necessary pin outs. Now you can give the RN-42 an easy access to breadboard.
Here comes an on board 5V relay with necessary pin outs to free you from the hassle of figuring our the relay pins. Just get this board and interface it with your arduino or micrcontroller to experiment with AC loads.
This document provides contact information for Tech Shop BD, including their Facebook page URL, website URL, and a phone number for inquiries. It focuses on common computing and appears to be advertising technology services and support.
PIC USB Starter kit is a simple and easy platform for newbies. The board features an PIC18F2550 and all of its Pinouts. Just plug the device with your PC or Laptop and load hex file to the on board PIC18F2550.The Pinouts Lets you connect the chip with external components like LEDs,buzzers etc.
Accessories:1)USB Cable
2)User Manual DVD
This can be used as an extension of our AVR programmer. This board has all necessary arrangement for programming AT89S series of 8051 microcontrollers with the help of our AVR programmer. Just short the VCC,GND, SCK, MISO, MOSI and RESET pins of the board with those of the AVR programmer and place the AT89S chip you want to programme on the zif socket.
Now you can load hex file using ProgISP from your PC to the microcontroller.
Arduino LCD Keypad Shield features an on board 16X2 LCD and a keypad consisting of six keys. The keys are-Select,Left,Right,Up,Down and Reset. The shield features all necessary pin outs with which you can interface any other device with the shield even when it is already connected to Arduino. with the help of male headers provided on top of the shield, digital pins of the arduino can be accessed. A POT is provided to control the contrast of the LCD.
This shield can be used simply by using Arduino's Liquid Crystal Library.
This module features eight on board push button switches in a single board. Just connect it to your breadboard or any other platform and control 8 loads simultaneously.
Students often faces difficulties in fiiguring out the pins of seven segment displays.This module features a 4 digit, Red, common anode 7 segment display with all necessery pinouts. All pins that are needed to glow a particular segement and digit are clearly marked which saves your time and labour.
Note: In this module the common pins of the four digits of the 7 segment are switched by four PNP transistors. So, you have to give logic 0 to S1-S4 pins to make the corresponding digit glow. For further clarification, you are requested to check the tutorial given in the 'Documents' section.
LCD module features an on board 16x2 LCD with necessary pin out to connect it to your project board.
If also has a POT by which you can control the LCD contrast and a back light On-Off switch.
This breakout board comes with an On board RN-42 Bluetooth module with all necessary pin outs. Now you can give the RN-42 an easy access to breadboard.
Here comes an on board 5V relay with necessary pin outs to free you from the hassle of figuring our the relay pins. Just get this board and interface it with your arduino or micrcontroller to experiment with AC loads.
This document provides contact information for Tech Shop BD, including their Facebook page URL, website URL, and a phone number for inquiries. It focuses on common computing and appears to be advertising technology services and support.
PIC USB Starter kit is a simple and easy platform for newbies. The board features an PIC18F2550 and all of its Pinouts. Just plug the device with your PC or Laptop and load hex file to the on board PIC18F2550.The Pinouts Lets you connect the chip with external components like LEDs,buzzers etc.
Accessories:1)USB Cable
2)User Manual DVD
This can be used as an extension of our AVR programmer. This board has all necessary arrangement for programming AT89S series of 8051 microcontrollers with the help of our AVR programmer. Just short the VCC,GND, SCK, MISO, MOSI and RESET pins of the board with those of the AVR programmer and place the AT89S chip you want to programme on the zif socket.
Now you can load hex file using ProgISP from your PC to the microcontroller.
Arduino LCD Keypad Shield features an on board 16X2 LCD and a keypad consisting of six keys. The keys are-Select,Left,Right,Up,Down and Reset. The shield features all necessary pin outs with which you can interface any other device with the shield even when it is already connected to Arduino. with the help of male headers provided on top of the shield, digital pins of the arduino can be accessed. A POT is provided to control the contrast of the LCD.
This shield can be used simply by using Arduino's Liquid Crystal Library.
3. • এটি SIM908-C GSM/GPS/GPRS কম্বো মডিউম্ের জন্য Breakout
Board.
• এম্ে মম্িম্মর জন্য একটি ছ োট double rail,SIM এর জন্য একটি
connecter ও অন্োন্য প্রম্য়োজন্ীয় ডিন্আউট রম্য়ম্ ।