This document contains certificates from Siemens Wind Power documenting training completed by Thomas Pasos. The certificates show that Thomas Pasos has completed trainings on topics such as basic harness use, first aid/CPR, rescue from wind turbines, electrical and hydraulic systems, crane and hoist operation, and bolt torque/tension. The certificates provide details on the training contents, objectives, durations and certify that Thomas Pasos is qualified to perform certain tasks according to Siemens Wind Power procedures and standards.
This certificate awards Mirajul Haque for successfully completing a Managing Safely course approved by the Institution of Occupational Safety and Health in association with NIST Institute Pvt Ltd. The certificate was signed on behalf of IOSH on July 7, 2016.
The document discusses the benefits of exercise for mental health. It states that regular exercise can help reduce anxiety and depression and improve mood and cognitive function. Exercise causes chemical changes in the brain that may help alleviate symptoms of mental illness.
Shamse Alam is seeking a new role as a Permit Receiver. He has over 3 years of experience in roles as a Permit Receiver in Saudi Arabia and Mumbai, India. His responsibilities have included ordering, receiving, storing, and issuing materials and maintaining computerized inventory records. He has a B.Com degree in Accounting and is proficient in MS Office, Tally, and other computer skills.
This certificate awards Mirajul Haque for successfully completing a Managing Safely course approved by the Institution of Occupational Safety and Health in association with NIST Institute Pvt Ltd. The certificate was signed on behalf of IOSH on July 7, 2016.
The document discusses the benefits of exercise for mental health. It states that regular exercise can help reduce anxiety and depression and improve mood and cognitive function. Exercise causes chemical changes in the brain that may help alleviate symptoms of mental illness.
Shamse Alam is seeking a new role as a Permit Receiver. He has over 3 years of experience in roles as a Permit Receiver in Saudi Arabia and Mumbai, India. His responsibilities have included ordering, receiving, storing, and issuing materials and maintaining computerized inventory records. He has a B.Com degree in Accounting and is proficient in MS Office, Tally, and other computer skills.
This document certifies that Arun Kumar S has completed a 3-year course of study in Electrical and Electronics Engineering over 6 semesters at the Government C.P.C. Polytechnic in Mysore, India. He has passed the final examination in the first class in May 2007. As a result, he is awarded a Diploma in Electrical and Electronics Engineering and can use the title D.E.E.
Mr. Bensafedine Belkacem worked as a Mechanical Technician for ALSTOM from January to March 2015 during a major inspection of a gas turbine at a power plant in Algeria. He demonstrated highly dedicated work with good mechanical skills and commitment to health, environment, and safety. Due to his efforts, the overhaul was completed safely and successfully. ALSTOM commends Mr. Belkacem for his excellent performance and recommends him for highly qualified positions.
This letter is a recommendation for Mr. Al-Nadzhar Valenzuela Amsali from his former employer Technology Partners FZLLC. It states that he worked there from October 2008 to September 2009 as an AutoCad operator and document controller. It says he performed his duties well and was hard working and honest. The letter was written at his request and does not constitute a financial obligation. It wishes him the best in future prospects as he has now left the company.
This document provides a student named Syed Mohammed Izas Syed Abuthanir with the results of their National Examination Board in Occupational Safety and Health (NEBOSH) examinations. It indicates that the student passed all three units, achieving marks of 98, 79, and 74 respectively. With an overall mark of 251, the student was awarded a Distinction grade for the NEBOSH International General Certificate in Occupational Health and Safety. The document also provides information on certification timelines and procedures for resitting exams or requesting enquiries about results.
Mr. Ajit Kangane worked as a Technical Support Executive at Micro Channel from July 2014 to August 2016. According to the letter, he remained dedicated to his work and was found to be active and hard working. Micro Channel wished him the best in his future endeavors.
MR. MAGDY HUSSINE HAMED has worked as a MECHANICAL COMMISSINING TEAM LEADER for SAMSUNG C&T Corporation Saudi Arabia at their Qurrayah Independent Power Project in Dammam, Saudi Arabia since June 2013. SAMSUNG C&T Corporation finds MAGDY HUSSINE HAMED to be a dedicated, energetic, and professional person who handles technical tasks efficiently and supports his colleagues with a high spirit and unique performance. SAMSUNG C&T Corporation highly appreciates his efforts during this time and wishes him success in his future career, and they look forward to working with him again on future projects.
This certificate certifies that Samrat Borah, a 4th year B.Tech Biotechnology student from Dr. MGR Educational and Research University in Chennai, Tamil Nadu, completed an internship at Indian Oil Corporation Limited's Guwahati Refinery from January 15th to March 30th, 2013. During the internship, he was found to be punctual and diligent. After completing the internship, he submitted a report on his final year project about Indian Oil Corporation Limited's Guwahati Refinery. The certificate wishes him all success in life.
This certificate certifies that Arunraj J worked for HCL Technologies Ltd. from October 10, 2012 to July 11, 2014 as a Member Technical Staff. He left the company voluntarily. The certificate, issued on August 05, 2014, is signed by an authorized representative and verifies his employment period and role.
Jamjama Bilal passed the Programming 1 Assessment test on 02.07.2016 with a result of 96%. A certificate was issued by Training for Industry to acknowledge passing the test. The certificate was provided by Siemens through their sitrain website for job training.
Wind Technicians competence framework SIEMENSFrank Emil Moen
The document discusses Siemens' wind turbine technician competence framework and the need for operations and maintenance technicians in the wind turbine manufacturing industry. It provides an overview of Siemens' wind power business, including their installed base, workforce size, and order backlog. It also summarizes Norway's wind power market potential and identified projects between 2010-2025.
This document certifies that Arun Kumar S has completed a 3-year course of study in Electrical and Electronics Engineering over 6 semesters at the Government C.P.C. Polytechnic in Mysore, India. He has passed the final examination in the first class in May 2007. As a result, he is awarded a Diploma in Electrical and Electronics Engineering and can use the title D.E.E.
Mr. Bensafedine Belkacem worked as a Mechanical Technician for ALSTOM from January to March 2015 during a major inspection of a gas turbine at a power plant in Algeria. He demonstrated highly dedicated work with good mechanical skills and commitment to health, environment, and safety. Due to his efforts, the overhaul was completed safely and successfully. ALSTOM commends Mr. Belkacem for his excellent performance and recommends him for highly qualified positions.
This letter is a recommendation for Mr. Al-Nadzhar Valenzuela Amsali from his former employer Technology Partners FZLLC. It states that he worked there from October 2008 to September 2009 as an AutoCad operator and document controller. It says he performed his duties well and was hard working and honest. The letter was written at his request and does not constitute a financial obligation. It wishes him the best in future prospects as he has now left the company.
This document provides a student named Syed Mohammed Izas Syed Abuthanir with the results of their National Examination Board in Occupational Safety and Health (NEBOSH) examinations. It indicates that the student passed all three units, achieving marks of 98, 79, and 74 respectively. With an overall mark of 251, the student was awarded a Distinction grade for the NEBOSH International General Certificate in Occupational Health and Safety. The document also provides information on certification timelines and procedures for resitting exams or requesting enquiries about results.
Mr. Ajit Kangane worked as a Technical Support Executive at Micro Channel from July 2014 to August 2016. According to the letter, he remained dedicated to his work and was found to be active and hard working. Micro Channel wished him the best in his future endeavors.
MR. MAGDY HUSSINE HAMED has worked as a MECHANICAL COMMISSINING TEAM LEADER for SAMSUNG C&T Corporation Saudi Arabia at their Qurrayah Independent Power Project in Dammam, Saudi Arabia since June 2013. SAMSUNG C&T Corporation finds MAGDY HUSSINE HAMED to be a dedicated, energetic, and professional person who handles technical tasks efficiently and supports his colleagues with a high spirit and unique performance. SAMSUNG C&T Corporation highly appreciates his efforts during this time and wishes him success in his future career, and they look forward to working with him again on future projects.
This certificate certifies that Samrat Borah, a 4th year B.Tech Biotechnology student from Dr. MGR Educational and Research University in Chennai, Tamil Nadu, completed an internship at Indian Oil Corporation Limited's Guwahati Refinery from January 15th to March 30th, 2013. During the internship, he was found to be punctual and diligent. After completing the internship, he submitted a report on his final year project about Indian Oil Corporation Limited's Guwahati Refinery. The certificate wishes him all success in life.
This certificate certifies that Arunraj J worked for HCL Technologies Ltd. from October 10, 2012 to July 11, 2014 as a Member Technical Staff. He left the company voluntarily. The certificate, issued on August 05, 2014, is signed by an authorized representative and verifies his employment period and role.
Jamjama Bilal passed the Programming 1 Assessment test on 02.07.2016 with a result of 96%. A certificate was issued by Training for Industry to acknowledge passing the test. The certificate was provided by Siemens through their sitrain website for job training.
Wind Technicians competence framework SIEMENSFrank Emil Moen
The document discusses Siemens' wind turbine technician competence framework and the need for operations and maintenance technicians in the wind turbine manufacturing industry. It provides an overview of Siemens' wind power business, including their installed base, workforce size, and order backlog. It also summarizes Norway's wind power market potential and identified projects between 2010-2025.
Hashem Demerdash Hashem worked for Siemens in Cairo, Egypt from October 2007 to September 2013 in two roles. First, from 2007 to 2011 he was a Project Manager overseeing several substation projects. Then from 2011 to 2013 he was a Sales Manager managing high voltage products, transformers, and voltage regulators tenders. The certificate confirms he showed punctuality, efficiency, and good teamwork during his time at Siemens.
The document is a scanned receipt from a grocery store purchase on June 15th, 2022 totaling $58.37. It lists items bought including ground beef, chicken breasts, tortillas, cheese, and produce such as tomatoes, onions, and lettuce. The receipt shows the item prices, taxes, and total amount paid.
This 3 sentence summary provides the key details about the internship report:
The internship report documents Shaikh Saadi's work during their summer internship at Siemens Pakistan in the Energy Management Transmission Solutions (EM-TS) department under the supervision of Mr. Umair Ahmad. The report includes an overview of the tasks completed during the internship and a discussion of the results. It also provides details about the various departments and processes within EM-TS, including grid stations, switchgears, transformers, bus bars, high voltage/low voltage devices, relays, and types of faults.
The document contains a name, Bilal Jamjama, and a date, 14 Jul 2016. No other information is provided in the document. In summary, the document only lists a name and date with no other context or details provided.
El documento describe diferentes partes de la boca como los dientes, encías, lengua y papilas gustativas. Explica que la lengua puede reconocer cuatro sabores básicos: dulce, amargo, salado y ácido. Luego pide colorear y clasificar algunos productos según su sabor como limón, sal, café y pastel.
Salah Mansour's CV-Electrical Engineer 1Salah Mansour
Salah Eldin Ibrahim Mansour Khedr is a 44-year-old Egyptian male who has over 18 years of experience working in electrical roles for drilling companies in Egypt, Oman, and Pakistan. He is currently seeking new employment opportunities and provides his contact information as well as a detailed summary of his professional experience, education, skills, and training.
Salah Eldin Ibrahim Mansour Khedr is a 45-year-old Egyptian national who has over 20 years of experience in electrical maintenance and operations in the oil and gas industry. He most recently served as an electrical field foreman for Weatherford Drilling International in Oman from 2013 to 2016. Prior to that, he held roles as a rig chief electrician for Weatherford in Oman and Pakistan from 2008 to 2013 and worked his way up from assistant electrician to chief electrician at the Egyptian Drilling Company from 1998 to 2008.
This document contains contact information and a resume for Azzeddine Zekri. It summarizes his education, including graduating from an institute with a diploma in industrial maintenance. For work experience, it details his roles as a coil tubing field technical specialist and operator from 2009 to the present for Boots & Coots Halliburton and Halliburton Energy Services. It lists his responsibilities and safety training, along with locations and types of coil tubing jobs performed in Algeria and Libya.
The Wind Turbine Technician Program at Francis Tuttle Technology Center includes certifications in first aid, fall protection, rescue, electrical safety, and OSHA training. Darin Campbell can be contacted at 405-717-4166 or dcampbell@francistuttle.edu for more information or to enroll. The program teaches skills needed for installing, maintaining, and repairing wind turbines over 44 class days from 8am to 3pm.
This document is a CV for Mohanad Mahmoud Zaki Mohamed applying for jobs in oil and gas as an instrument and maintenance engineer, field engineer, or HSE engineer. The CV provides details on his education, including a Bachelor's degree in electrical engineering, and professional experience including positions as a safety engineer and data acquisition engineer. It also lists safety and technical training certificates held to qualify for roles in the oil and gas industry.
Robert Garrett has 18 months of experience as a Regional Service Engineer for Trelleborg Marine Systems in Dubai, where he is responsible for installation, commissioning, inspections, business development, product maintenance, and contractor training across India, the Middle East and Africa. Previously, he worked for 7 years as a service technician for Vestas Wind Systems, specializing in renewable mechanical and electrical engineering. He has a background in marine engineering, obtaining qualifications from Portsmouth University and the Royal Navy.
This document is a curriculum vitae for Ahmed Mohamed Abd El Moneim Saad. It includes his personal details, education history, work experience, skills and qualifications. Some key points:
- He has a BSc in electronic and communication engineering from Tanta University in 2004.
- He has over 11 years of experience as an I&C commissioning and maintenance engineer working on various power plant projects in Egypt. This includes work on gas turbines from Siemens and GE, as well as steam turbines from Mitsubishi.
- His roles have included construction, commissioning, start up support, and maintenance engineering. He is skilled in control systems, instrumentation calibration, and commissioning tests
Mohamed Kamal Eldin is a maintenance supervisor with over 12 years of experience in oil field maintenance. He is currently a maintenance supervisor at Egyptian Drilling Company, overseeing maintenance on the rig Sneferu. He has held various maintenance roles of increasing responsibility over his career. He has extensive experience managing maintenance on offshore rigs, including commissioning, maintenance programs, and repair. He is seeking a new challenging position utilizing his experience in the oil and gas industry.
Dewahar Babu is an experienced electrical engineer seeking a position that allows professional growth. He has over 15 years of experience in electrical maintenance and has expertise in electrical technology, fault finding, and maintaining electrical systems. His professional experience includes roles at several manufacturing companies where he performed preventative maintenance on machinery, utilities, and automated systems.
Job Safety Analyses For Energization of Substation..docAtif767782
This document outlines safety practices for energizing a substation. It lists 6 key steps of the job: 1) obtaining a work permit, 2) work preparation and planning, 3) arranging and inspecting tools/equipment, 4) conducting a daily toolbox talk, 5) using hand tools, and 6) switching the main control switch. For each step, potential hazards are identified and controls are recommended to minimize risks. Proper personal protective equipment, lockout/tagout procedures, communications, and only allowing certified personnel to perform high-risk tasks are among the numerous controls described to enhance safety when energizing the substation.
3 m edge eg5 intrinsically safe user manual (053 669 rev i)Home
Here are the typical steps to perform a noise assessment with the Edge dosimeter:
1. Identify tasks, jobs, or areas of concern that may have high noise exposure levels. Perform a walk-through and observe worker tasks.
2. Select monitoring locations based on the task analysis. Place the dosimeter on workers in those areas.
3. Program the Edge dosimeter settings based on the relevant noise regulations (e.g. OSHA, MSHA). Configure parameters like run type, criteria levels, exchange rates.
4. Train workers on how to wear and operate the dosimeter properly. Ensure a tight, secure fit on their person.
5. Start monitoring runs when workers enter areas of concern
Md. Zayauddin is an experienced professional in maintenance of rolling stock, refrigeration, and air conditioning with over 10 years of experience. He currently works as a senior technician for Delhi Metro Rail Corporation where he oversees daily maintenance activities and troubleshoots failures. Previously, he worked as an instructor in refrigeration and air conditioning. He has diplomas in refrigeration/air conditioning and electrical engineering.
Wassef Afif is an industrial technician seeking employment. He has a diploma in industrial maintenance from 2009 and high school certification in technology from 2006. His internships include projects at Société la paix Carthage Land and maintenance training at TUNISAIR. Since 2010, he has worked as an industrial technician at SFBT Beverage Manufacturing Company of Tunisia, where his responsibilities include installing and dismantling PET beverage lines, diagnostic visits, and monitoring maintenance and key performance indicators. He also worked briefly calibrating measuring devices at CK metrology in 2010. His skills include SOLIDWORKS, AUTOCAD, SAP, and Microsoft Office.
This document provides instructions for installing and using SICAM RTUs and SICAM AK systems. It describes the mechanical design of the mounting racks, how to install the racks, and how to install modules. It also covers system components, engineering the system, maintenance, and the licensing agreement. The document is intended for those installing, operating, and servicing SICAM AK systems.
Mohamed Mohamed Abdel Fatah Ismail is an Egyptian safety engineer with 5 years of experience in the oil and gas industry. He has worked as a Safety Training Coordinator for Weatherford Drilling International in Egypt and as an HSE Engineer for Petro Drilling Service Overseas Company in Egypt. Mohamed holds several safety certifications including NEBOSH, IOSH, OSHA, and IADC Rig PASS. He is also a certified safety trainer through IASP.
Max Safety provides work at height and confined space rescue training programs and consulting services. They offer courses on safe work practices, rescue techniques, and emergency response for wind turbine maintenance and inspection. The courses are hands-on and focus on proper safety equipment use, anchor point selection, rescue plans, and first aid. Max Safety aims to improve safety awareness and compliance with regulations.
Mohamed Kamel Elsakhawy is seeking a position as an ETO or electrical engineer where he can utilize his extensive experience. He has worked in various roles including as an IT advisor, maintenance engineer, and ETO on DP vessels. His experience includes maintaining different systems like pumping systems, compressors, and various DP reference systems. He has qualifications in areas like firefighting, survival, medical first aid, and his ETO certificate of competency.
This document provides a summary of Charles C. Uwakwe's qualifications and experience. He has a Master's degree in Computer Security and over 5 GWO certifications. He has experience working in rope access, rigging, security, and facilities maintenance. He is seeking new opportunities that make use of his computer skills, certifications, and willingness to travel for work.
Willem Candido Monteiro is a 30-year-old Brazilian senior subsea engineer with over 9 years of experience in the oil and gas industry. He has worked for Seadrill and Transocean, where he was awarded best subsea rig in Seadrill's fleet in 2013 and 2014. Monteiro has extensive experience maintaining subsea equipment including BOPs, compensators, and tensioning systems. He is proficient in safety programs and holds various industry certifications. Monteiro is currently pursuing a production engineering degree and seeks to contribute his skills and safety focus to a new employer.
1. www.siemens.com
Head of Technical and Safety Training
Siemens Wind Power A/S
If any questions contact Training Center DK: +45 99 42 88 55
Certificate
KRIMA EHS Reporter Training
(Service) - eLearning
SE-B-2405
GID no./Company: Z0036AMM Siemens Energy, Inc. Name: Thomas Pasos
Date of completion:
Date of expiry: No expiry
This certificate is only valid as long as the certificate holder has access to updated
Siemens Wind Power documentation.
Purpose
KRIMA EHS (Service) Reporter eLearning - How to report and follow up an EHS Event
Objectives
After the training the participant will be able to find and login to KRIMA EHS (Service),
report EHS Event and follow up the report.
Contents
1) how to start up KRIMA EHS (Serviec) - log in using PKI card and Windows login;
2) how to start, fill-out and save (send) your report;
3) how to follow up your report.
Who should attend?
It is mandatory training in Energy Sector for user who need to report and follow-up EHS
events and incidents/accidents.
Course duration
1 hours
2. www.siemens.com
Houston, 22 March 2013
Head of Technical and Safety Training
Siemens Wind Power A/S
If any questions contact Training Center DK: +45 99 42 88 55
Certificate
Advanced Rescue Zone 1-2
SE-P-00001
GID no./Company: Z0036AMM Siemens Energy, Inc. Name: Thomas Pasos
Date of completion: 22 March 2013
Date of expiry: 22 March 2014
This certificate is only valid as long as the certificate holder has access to updated
Siemens Wind Power documentation.
Purpose
- Access to rescue zone 1, 2, & 2A in Siemens Wind turbines. The participant is qualified
to carry out rescue and evacuations from Siemens Wind Turbines zones 1, 2, & 2A in
accordance with Siemens Procedure for Working at Heights, Rescue from Heights and
Visitor in Wind Turbine Generator.
Contents
The participant has demonstrated:
- Safe and correct rescue of casualties in zone 1, 2, & 2A in wind turbines
- Safe and correct use of Siemens Rescue Kit in rescue situations
- Safe and correct assistance for rescue teams
- Safe and correct harnessing of an unconscious person on a spine board and a basket
stretcher
- Safe and correct evacuation of casualties from wind turbines using the Skylotec Milan
A-020, Milan Hub A-024 and the Milan Power A-029
- Safe and correct assistance in rescue situations with helicopter assistance
Duration
36 hours
Competences
Access to zone 1, 2, & 2A in Siemens Wind turbines related to safety alert 17/08 R2 The
participant is qualified to carry out rescue and evacuations from Siemens Wind Turbines
zones 1, 2, & 2A in accordance with Siemens Procedure 05.17
3. www.siemens.com
Orlando Fl., 20 March 2014
Head of Technical and Safety Training
Siemens Wind Power A/S
If any questions contact Training Center DK: +45 99 42 88 55
Certificate
Advanced Rescue Zone 1-2
Refresher
SE-P-00100
GID no./Company: Z0036AMM Siemens Energy, Inc. Name: Thomas Pasos
Date of completion: 20 March 2014
Date of expiry: 20 March 2015
This certificate is only valid as long as the certificate holder has access to updated
Siemens Wind Power documentation.
Purpose
The training refreshes the participant's skills to carry out rescues from Siemens wind
turbines from rescue zones 2 & 2A in accordance with Siemens' Procedure for Working
at height, Rescue from height & Visitor in WTG.
Contents
The participant has demonstrated:
- Safe and correct rescue of casualties in zone 1, 2, & 2A in wind turbines
- Safe and correct use of Siemens Rescue Kit
- Safe and correct harnessing of an unconscious person on a spine board and a basket
stretcher
- Safe and correct evacuation of casualties from wind turbines using Siemens Rescue
Kit, Milan A-020, Milan Hub A-024 and Milan Power A-029
Duration
16 hours
Competences
The participant is qualified to carry out rescue and evacuations from Siemens Wind
Turbines zones 1, 2, & 2A in accordance with Siemens Procedure 05.17
4. www.siemens.com
Houston, 06 November 2012
Head of Technical and Safety Training
Siemens Wind Power A/S
If any questions contact Training Center DK: +45 99 42 88 55
Certificate
Basic Harness PFPE
SE-P-00200
GID no./Company: Z0036AMM Siemens Energy, Inc. Name: Thomas Pasos
Date of completion: 06 November 2012
Date of expiry: No expiry
This certificate is only valid as long as the certificate holder has access to updated
Siemens Wind Power documentation.
Purpose
The training focuses on providing the awareness of personal fall protection equipment.
The participant has learned how to care for, inspect and maintain the equipment for
daily use in order to perform tasks at height safely and sensibly. Training consists of
interactive theoretical class and practical exercises on ladder. Practical experience
includes proper usage and general inspection of PFPE.
Contents
The participant is able to demonstrate:
- Safe and correct fitness of Miller harness
- Safe and correct usage of harness and accessories.
- Safe and correct positioning on a ladder
- Correct user inspection
- Understanding of standards and regulations applying to working at heights
- Safe and correct use of fall arrest systems
Duration
4 hours
Competences
The participant has obtained competences to use Miller harness in a correct and safe
manner as well as perform daily inspection and maintenance of this PFPE.
5. www.siemens.com
Houston, 07 November 2012
Head of Technical and Safety Training
Siemens Wind Power A/S
If any questions contact Training Center DK: +45 99 42 88 55
Certificate
Basic Height Rescue Zone 1
SE-P-00300
GID no./Company: Z0036AMM Siemens Energy, Inc. Name: Thomas Pasos
Date of completion: 07 November 2012
Date of expiry: 07 November 2013
This certificate is only valid as long as the certificate holder has access to updated
Siemens Wind Power documentation.
Purpose
Using step by step training to provide an extensive knowledge on how to perform a
safe rescue and evacuation of casualties from wind turbines. Learning includes
theoretical insight to Milan rescue equipment and simulated exercises. The participant
has performed live rescue and evacuation of an unconscious casualty from the ladder
after a fall.
Contents
The participant is able to:
- Safe and correct use of Miller harness and rescue equipment. Safe and correct use of
Milan A- 020 and Milan hub A-024
- Accessing suitable anchor points
- Safe and correct techniques when working on ladder with fall arrest manyard, Cabloc
and fall restraint lanyards
- Choose a safe rescue and evacuation path from wind turbine considering location,
position, casualty's condition, etc.
- Safe and correct rescue of casualties from zone 1 (tower/nacelle)
- Single and double evacuation from height
- Correct user inspections of Milan A-020 and Milan hub A-024
Duration
12 hours
Competences
The participant is certified to work in zone 1 (tower/nacelle) access areas and is
competent to perform basic rescue and evacuation of oneself and co-worker.
6. www.siemens.com
USA - Call for info, 09 May 2013
Head of Technical and Safety Training
Siemens Wind Power A/S
If any questions contact Training Center DK: +45 99 42 88 55
Certificate
Blade Rescue Horizontal
SE-P-01600
GID no./Company: Z0036AMM Siemens Energy, Inc. Name: Thomas Pasos
Date of completion: 09 May 2013
Date of expiry: 09 May 2015
This certificate is only valid as long as the certificate holder has access to updated
Siemens Wind Power documentation.
Contents
The training provides the participant with the necessary skills to carry out blade rescue
while the blades are in horizontal position 0 to 9 degrees (zone 3) in 1.0, 1.3, 2.0 and
2.3 CS + VS Siemens Wind turbines
The participant has demonstrated:
- Safe and correct use and user inspection of the Siemens Spec Pak kit.
- Safe and correct rescue from blades (zone 3)
- Assessing suitable anchor points
Duration
- 8 hours
Competences
- The delegates are competent in the use of the following evacuation devices: Skylotec
Milan A-020, Milan Hub A-024 and the Milan Power A-029.
7. www.siemens.com
Houston, 05 November 2012
Head of Technical and Safety Training
Siemens Wind Power A/S
If any questions contact Training Center DK: +45 99 42 88 55
Certificate
First Aid / CPR / AED
SE-P-05050
GID no./Company: Z0036AMM Siemens Energy, Inc. Name: Thomas Pasos
Date of completion: 05 November 2012
Date of expiry: 05 November 2014
This certificate is only valid as long as the certificate holder has access to updated
Siemens Wind Power documentation.
Cardiopulmonary Resuscitation (CPR)
Use of an Automated External Defibrillator (AED)
Assessment and Personal Safety
Activating EMS
Clearing and Protection the Airway and Ventilation
Chest Compressions and One-Rescuer DPR
AED Operation and Basic Maintenance
Control of Bleeding and Shock management
Foreign Body Airway Obstruction
Warning signs of Illness
Mechanism of Injury
Emotional impact of providing care
Bloodborne Pathogens
8. www.siemens.com
Houston, 09 November 2012
Head of Technical and Safety Training
Siemens Wind Power A/S
If any questions contact Training Center DK: +45 99 42 88 55
Certificate
Rigging
SE-P-05150
GID no./Company: Z0036AMM Siemens Energy, Inc. Name: Thomas Pasos
Date of completion: 09 November 2012
Date of expiry: No expiry
This certificate is only valid as long as the certificate holder has access to updated
Siemens Wind Power documentation.
Purpose
Describe methods of properly managing, and actions necessary to protect Siemens
Wind Power employees and employed subcontractors during the inspection, use, and
maintenance of rigging equipment
Objectives
- This training enables the participants to:
- Understand and explain the importance of Federal Occupational Safety and Health
Administration (OSHA) regulations, as they relate to safe rigging procedures
- Perform initial inspection, frequent inspection and periodic inspection of all rigging
equipment
- Estimate load weights before lifting and be aware about communication hand signals,
radio protocol from signaler to crane operator
- Demonstrate hands-on skills necessary to rig a load and lift the load safely
Contents - General rules for rigging
Course duration - 4 hours
9. www.siemens.com
Houston, 02 November 2012
Head of Technical and Safety Training
Siemens Wind Power A/S
If any questions contact Training Center DK: +45 99 42 88 55
Certificate
US Regional Safety Compliance
Training (Regional HSE)
SE-P-05200
GID no./Company: Z0036AMM Siemens Energy, Inc. Name: Thomas Pasos
Date of completion: 02 November 2012
Date of expiry: No expiry
This certificate is only valid as long as the certificate holder has access to updated
Siemens Wind Power documentation.
Purpose
Compliance with US federal law minimum training requirements, and ensure all
employ-ees and contractors are aware of Siemens Americas regional Local Specific
Procedures and requirements such as LOTO, Confined space and PPE.
Contents
The participant has gained knowledge and skills within:
- Reading and understanding a material safety data sheet (MSDS)
- Local requirements for operating forklifts and sky lifts
- The importance of personal protection equipment (PPE) and the responsibilities
related to use of PPE
- The ability to complete Lock Out Tag Out & Confined space forms unassisted
- Recognizing hazard associated with 'struck by & caught between' hazards
- Recognizing the hazards associated with hand and power tools and their
responsibilities as the relate to tools
- Safely conduct manual lifts such as carrying tools and parts to and form truck
- Extreme temperature practices
- Companies electrical safety policies and practices
- Tailboards, JHAs, and current US Safety Alerts
Duration
2 days
Competences
US Regional Safety Compliance Course certificate
10. www.siemens.com
Houston, 13 November 2012
Head of Technical and Safety Training
Siemens Wind Power A/S
If any questions contact Training Center DK: +45 99 42 88 55
Certificate
Drivers Safety Training
SE-P-05250
GID no./Company: Z0036AMM Siemens Energy, Inc. Name: Thomas Pasos
Date of completion: 13 November 2012
Date of expiry: No expiry
This certificate is only valid as long as the certificate holder has access to updated
Siemens Wind Power documentation.
11. www.siemens.com
Orlando Fl., 12 September 2014
Head of Technical and Safety Training
Siemens Wind Power A/S
If any questions contact Training Center DK: +45 99 42 88 55
Certificate
SWP Basic Turbine Electricity And
Hydraulics
SE-P-06000
GID no./Company: Z0036AMM Siemens Energy, Inc. Name: Thomas Pasos
Date of completion: 12 September 2014
Date of expiry: No expiry
This certificate is only valid as long as the certificate holder has access to updated
Siemens Wind Power documentation.
Purpose
To develop the skills to work on/with electrical and hydraulic systems according to
Siemens Wind Power rules through theory and practical training and using Siemens
Wind Power selected tools.
Contents
The participant has gained knowledge and skills within:
- Electrical system concepts such as Ohms law, AC & DC voltage, transformer, diodes,
contactors etc.
- Hydraulic system aspects such as filter technology, hydraulic oil, brake station and
etc.
- Correct and safe troubleshooting on the basic electric and hydraulic systems
- Safe and proper use of tools and measuring devices ( manometer, multimeter) and
knowledge of relevant Material Safety Data Sheets (MSDS)
- Basic´s in read, understand and analyze electric and hydraulic diagrams
Duration
30 hours (4 days)
Competences
The participant is able to do work place assessment and perform basic troubleshooting
on electric and hydraulic systems following the safety regulations and use relevant
Siemens Wind Power documentation.
12. www.siemens.com
Houston, 08 November 2012
Head of Technical and Safety Training
Siemens Wind Power A/S
If any questions contact Training Center DK: +45 99 42 88 55
Certificate
Bolt Torque and Tension
SE-P-06100
GID no./Company: Z0036AMM Siemens Energy, Inc. Name: Thomas Pasos
Date of completion: 08 November 2012
Date of expiry: No expiry
This certificate is only valid as long as the certificate holder has access to updated
Siemens Wind Power documentation.
The holder of this certificate has obtained knowledge and skills within:
- Why Siemens Wind Power’s personnel must tighten bolts as described in the manuals
- Different bolt types and how they are marked.
- The impact of over-tightening or under-tightening bolts.
- Safety instructions for hydraulic tools used for bolt torque and tensioning.
- How to decide whether a tower flange needs shimming or not.
- How to fill out checklists applied to bolt tightening and shimming of tower flanges.
- Inspecting pumps and hoses visually to identify damages and leaks
- Operating torque and tension tools correctly in accordance with safety and technical
instructions found in SWP’s manuals.
- Proper use of PPE and safety equipment.
- Identifying different bolt types and determine their nominal torque as described in
the SWP’s manuals.
- Filling out checklists applied to bolt torque and tension tasks.
Duration: 8 hours
Competencies:
The holder of this certificate is qualified to perform bolt torque & tensioning
under supervision of a Maintenance Technician or TSWA approved
Technician. The technician is obligated to obtain a Task Specific Work
Approval (TSWA) to work unsupervised.
13. www.siemens.com
Houston, 09 November 2012
Head of Technical and Safety Training
Siemens Wind Power A/S
If any questions contact Training Center DK: +45 99 42 88 55
Certificate
Crane and Chain Hoist User
Training
SE-P-06600
GID no./Company: Z0036AMM Siemens Energy, Inc. Name: Thomas Pasos
Date of completion: 09 November 2012
Date of expiry: No expiry
This certificate is only valid as long as the certificate holder has access to updated
Siemens Wind Power documentation.
Purpose
The training is designed to enable the participant to operate the HMF supplied cranes
and chain hoist used in the wind turbines with compliance to Siemens Wind Power
documentation.
Contents
The participant has gained a profound knowledge and skills within:
- Both crane and electrical chain hoist structure and its diverse components
- The operational aspects of the crane and chain hoist
- Directions and prohibitions for chain hoist use related to Siemens wind turbine (SWT)
works
- Relevant documentation and special equipment
- Hydraulic, Electric and load diagrams
- Safety inspection in daily use
- Identify the correct lifting equipment used within Siemens Wind Power
- Risk assessment
Duration
4 hours
Competences
The participant is qualified to operate the crane and chain hoist in a safe and proficient
manner.
14. www.siemens.com
Orlando Fl., 12 September 2014
Head of Technical and Safety Training
Siemens Wind Power A/S
If any questions contact Training Center DK: +45 99 42 88 55
Certificate
Gearbox inspection
SE-P-06800
GID no./Company: Z0036AMM Siemens Energy, Inc. Name: Thomas Pasos
Date of completion: 12 September 2014
Date of expiry: No expiry
This certificate is only valid as long as the certificate holder has access to updated
Siemens Wind Power documentation.
Purpose
The aim of the training is to enable the participant to do service inspection of the
gearbox with compliance to Siemens Wind Power documentation. This training can be a
part of task specific instruction.
Contents
The participant has gained the knowledge and skills within:
- Different gear types
- Gearbox components and its build up
- Read, fill out and understand a gearbox report released by Siemens Wind Power
- Inspection performance by means of guidelines from service technique - handed out
material
- Keep esthetical working environment (gearbox, tools and etc.)
- Inspection for different damages (micro pitting, spalling, cracks, fracture, etc.)
- The turbine conditioning monitoring system (TCM) for bearings and teeth damage
detection
Duration
4 hours
15. www.siemens.com
Houston, 31 October 2012
Head of Technical and Safety Training
Siemens Wind Power A/S
If any questions contact Training Center DK: +45 99 42 88 55
Certificate
Technical Safety Training
SE-P-07900
GID no./Company: Z0036AMM Siemens Energy, Inc. Name: Thomas Pasos
Date of completion: 31 October 2012
Date of expiry: No expiry
This certificate is only valid as long as the certificate holder has access to updated
Siemens Wind Power documentation.
The holder of this certificate has obtained the following qualifications:
This course, in conjunction with the completed courses on Level 1 (Basic Safety) and
Level 2 (Work at Heights), will meet minimum requirements to work on a service /
installation site and to climb turbines supervised by a competent technician.
16. www.siemens.com
Orlando Fl., 10 October 2014
Head of Technical and Safety Training
Siemens Wind Power A/S
If any questions contact Training Center DK: +45 99 42 88 55
Certificate
LEVEL 5 Operations and
Maintenance SWT 2.3VS
SE-P-08500
GID no./Company: Z0036AMM Siemens Energy, Inc. Name: Thomas Pasos
Date of completion: 10 October 2014
Date of expiry: No expiry
This certificate is only valid as long as the certificate holder has access to updated
Siemens Wind Power documentation.
The above named participant has successfully completed the coursework for 2.3 O&M
Technician. The participant is qualified to perform all duties involving the scheduled
maintenance for the 2.3 Siemens Wind Turbine. After approval from an authorized site
AP, the participant can start and stop the turbine, perform Lock-Out Tag-Out (LOTO)
procedure for service, complete the tasks from the Service Checklist, supervise
technicians in performing the scheduled maintenance, and has attained the
Maintenance Technician qualification.
17. www.siemens.com
Houston, 12 November 2012
Head of Technical and Safety Training
Siemens Wind Power A/S
If any questions contact Training Center DK: +45 99 42 88 55
Certificate
Intranet Tutorial / Supply Chain
Overview
SE-P-44300
GID no./Company: Z0036AMM Siemens Energy, Inc. Name: Thomas Pasos
Date of completion: 12 November 2012
Date of expiry: No expiry
This certificate is only valid as long as the certificate holder has access to updated
Siemens Wind Power documentation.
Intranet Tutorial
Overview of basic computer skills along with navigation around the Siemens Workspace
websites and other important company information.
Supply Chain Overview
Overview of Inventory Management as it relates to the technician responsibilities from
the field.
Focus will be on understanding the flow of materials and how to create and utilize work
orders, inventory movement sheets, SL1 bin, and the parts return process.
18. www.siemens.com
Orlando Fl., 10 October 2013
Head of Technical and Safety Training
Siemens Wind Power A/S
If any questions contact Training Center DK: +45 99 42 88 55
Certificate
First Aid GWO
SE-P-50010
GID no./Company: Z0036AMM Siemens Energy, Inc. Name: Thomas Pasos
Date of completion: 10 October 2013
Date of expiry: 10 October 2015
This certificate is only valid as long as the certificate holder has access to updated
Siemens Wind Power documentation.
This is to certify that this course participant has attended the First Aid GWO course. This
course teaches the participant to administer safe and effective First Aid while working
in the wind turbine industry and in a wind turbine generator environment. This course
conforms with the GWO First Aid course standard and enables the course delegate to
gain the following skills and competencies via theoretical and practical training:
- Legislation
- Anatomy
- Management of an incident
- Lifesaving First Aid and the Airways-Breathing-Circulation (ABC) Primary Survey
- CPR including the use of an AED
- Ordinary First Aid
- Scenario-based practical training
- Olaes Bandage and C.A.T. Turniquet
Duration: 16 hours.
This course participant is now a competent First Aider within GWO accredited
companies and sites.
19. www.siemens.com
Houston, 15 November 2012
Head of Technical and Safety Training
Siemens Wind Power A/S
If any questions contact Training Center DK: +45 99 42 88 55
Certificate
Manual Handling GWO
SE-P-50020
GID no./Company: Z0036AMM Siemens Energy, Inc. Name: Thomas Pasos
Date of completion: 15 November 2012
Date of expiry: 15 November 2014
This certificate is only valid as long as the certificate holder has access to updated
Siemens Wind Power documentation.
Purpose:
The aims of this module are to give the participants the awareness through theoretical
and practical training to encourage positive manual handling behavior and perform
manual handling activities in a safe manner within the wind turbine industry.
Contents:
Introduction, Legislation Risks and hazards, Spinal anatomy and posture, Planning lifts,
Risk controls and lifting techniques, Behavioral safety, Scenario based training and
Evaluation.
Duration:
4 hours
Competencies:
Upon completion of this courses the delegate are considered competent to work with
manual handling within GWO accredited companies or sites.
20. www.siemens.com
Orlando Fl., 15 October 2013
Head of Technical and Safety Training
Siemens Wind Power A/S
If any questions contact Training Center DK: +45 99 42 88 55
Certificate
Working at Heights GWO
SE-P-50040
GID no./Company: Z0036AMM Siemens Energy, Inc. Name: Thomas Pasos
Date of completion: 15 October 2013
Date of expiry: 15 October 2015
This certificate is only valid as long as the certificate holder has access to updated
Siemens Wind Power documentation.
Purpose:
The aim of this course is to provide the participants with the necessary basic knowledge
and skills through theoretical and practical training to use basic fall protective
equipment, to perform safe work and to conduct safe and basic rescue from heights, in
a remote wind turbine environment and at minimum heights of 6.75m in accordance
with GWO Basic Safety Training Working at Heights.
Equipment:
- Söll Universal II Wind
- Cabloc AC350/4
- LadSaf Detachable Cable Sleeve (model number 6116540)
- Milan Evacuation device A-020
- Milan Hub rescue device A-024
- Milan Power rescue device A-029
Competencies:
Upon completion of this course the delegate is considered competent to conduct work
at heights at GWO accredited companies or sites.
Duration: 16 hours