The document contains 10 questions regarding the schematic for Sewell Park, asking for confirmation on details like using 1" HDPE toilet partitions instead of CMU walls, whether existing equipment can be reused, requests for equipment makes and models like ice makers and hot dog bun warmers, a review of the concession stand layout, confirmation on installing rolling concession doors on the exterior rather than interior, requests for toilet accessory manufacturer details, and whether ball stop fencing is needed at the warm up area.

1. 5855 Jimmy Carter Boulevard Suite 218 Norcross, Georgia 30071 770.729.8433 fax 770.729.8466
SEWELL PARK SCHEMATIC QUESTIONS
1. Please confirm that only (no CMU divider walls) 1" HDPE toilet partitions are to used. Currently
there are 4" CMU dividing walls used in conjunction with the 1" toilet partitions.
2. Are the following existing equipment to be reused:
a. Reach in cooler with Coke emblem on the top
b. Reach in cooler with bottle stacking racks by True
c. Popcorn Machines - 2
d. Reach in freezer
e. Nacho Cheese warmer
f. Equipment pictured below
g. Icee Machine
h. Any equipment to be reused not noted above.
3. Is there a make or model of ice maker that is requested? Do you want a flake ice machine.
4. Should we allow for future soda dispensers?
5. Should there be allowances for other future machines such as a flavored ice?
6. Is there a make or model number requested for the hotdog bun warmer?
7. Please review the concession stand layout for equipment location and function. The half walls
are to provide electrical connections above and below counters without having to put in floor
outlets.
8. Please confirm request to have the rolling concession doors to be on the outside of the building.
Interior installation will provide better protection for door.
9. Is there a particular manufacturer of toilet accessories or model number that is requested.
10. Do we need to allow for any ball stop fencing at the warm up area.