This document provides pricing and product information for two options for enhancing a shell scheme exhibition stand - shell scheme enhancement graphics and the T3 Airframe modular display system. The shell scheme enhancement uses velcro attachments and seamless graphic panels that attach to the shell scheme posts to create graphic walls and surfaces without using floor space. Pricing is provided for a sample 3x3m stand configuration. The T3 Airframe is a modular framing system that uses aluminum tubes, connectors, and magnetic graphic panels to construct free-standing exhibition displays. Pricing is listed for a sample 3x3m configuration including frames, panels, lights, and transport case. Installation services are also quoted.

1. The Stand Design & Production Services for
Exhibition Graphics
SAMPLE
Quotation
R
U

2. Shell Scheme
Enhancement Option
The use of Shell Scheme Enhancement achieves a significant improvement over
traditional portable display boards, pop-ups and banners and, as a result, is the
preferred solution for an increasing number of exhibitors, exhibition designers and
exhibition contractors when planning their shell scheme exhibition stand designs, both
in the UK and overseas.
Velcro covered plastic attachments fit into the shell scheme posts to give a flat surface
to attach the seamless graphics.
The graphic panel is rolled out of the carry tubes and fixed to the attachments using
Velcro to create seamless graphics.
The attachments fit into every post allowing the graphics to flow like wallpaper around
corners and all walls to fill your shell scheme space.

3. Convert your bland empty shell scheme space.
Into a classy and professional space using up none of your stand floor space.
You can chose to remove the fascia boards and posts to give the impression of a space
only, bespoke built stand, therefore looking like a big player not a start up company.
This can all be done in minutes by one person. There is no need to pay huge amounts
for transport as the graphics roll up into tubes. These carry tubes are light and robust.

5. Your Quotation
Example for a 3m x 3m x 3m Shell Scheme Stand open on one side
ITEM Amount Cost per Item Total Cost
Needed
3.5mm Full Graphic Printed 9 £150.00 £1,350.00
Panel (2440mm x 1000mm)
Post attachments 30 £10.00 £300.00
Corner Post attachments 6 £6.00 £36.00
Heavy Duty Carry Tubes 3 £25.00 £75.00
TOTAL £1,761.00
All prices exclude VAT, Delivery and Artwork if needed.
Panel Position & Final size
Panel 2, 5 & 8 Centre to centre 2400 x 990mm
Panel 1 & 9 Centre to end 2400 x 1011mm
Panel 3, 4, 6 & 7 Centre to inside corner 2400 x 958mm

6. Example for a 3m x 3m Shell Scheme Stand open on two 3m sides
ITEM Amount Cost per Item Total Cost
Needed
3.5mm Full Graphic Printed 6 £150.0 £900.00
Panel (2440mm x 1000mm)
Post attachments 21 £10.00 £210.00
Corner Post attachments 3 £6.00 £18.00
Heavy Duty Carry Tubes 2 £25.00 £50.00
TOTAL £1,178.00
All prices exclude VAT, Delivery and Artwork if needed.
This is a shell scheme enhancement and has no furniture, carpet etc but lights could be
purchased with the kit. These items can also be acquired through the show organisers.
We advise that you do not need help with the installation of Shell Clad as it is a product
that is sold for self installation and breakdown. We can however help you and show you
how it is done. Along with installation we can dismantle your stand, transport it and
store it (price on request). If you have 3 or more installations we will store your kit free

7. of charge at our stores for 12 months. These prices will be much reduced if we are at
the show attended.
Once your items have been purchased the reinstallation is the only fee you will/could
incur. You can mix and match the above as you see fit. You do not need to have any of
the items listed and can install and dismantle easily yourselves. We are here to help and
will take your lead and help you in any way you require. Qdos can deliver the
equipment to you in transport tubes for you to take to the shows and Install yourselves.
To add to this system is easy and very cost effective. If you purchase a 3m x 3m
system and wish to add an extra 1m panel to it the all you need to purchase is 1
3.5mm Full Graphic Printed Panel (2440mm x 1000mm) @ £166.30 (Now £150.00) and
3 Post attachments @ £10.00 each. All you need to think about is keeping the artwork
in keeping with the running 3 previous meters. This system is flexible and can be added
to on either side or converting a 2 sided stand into a 3 sided stand by just purchasing a
few extra, cost effective pieces.
You just have to ensure that your panel’s artwork fits together in many different ways
so that the stand doesn’t look haphazard.
We have the great pride in announcing that Qdos Exhibitions have just won the
Association of Event Organisers "Stand Design and Build Suppliers of the
Year" Award for 2010. There was fierce competition for the prestigious honour but
happily Qdos Exhibitions prevailed. We hope that we can furnish you with our
award winning service soon. http://www.aeo.org.uk/page.cfm/link=75
Formed in 1999, Qdos Exhibitions is a Highly Creative and Award-Winning Design, Build
and Project Management Company specialising in Bespoke Exhibition Stands, Stage and
Conference Sets, Modular Stand and Pop-Up Solutions and Interiors.

8. Option 2,
Airframe, T3
T3Airframe is the perfect display framing system and graphic carrier. It provides
unbeatable flexibility and stability using just a few cleverly designed components.
Because T3Airframe is so easy to put together, you don’t need expensive skilled labour,
you can do it yourself. Structures can be assembled in just a few minutes. And, at the
end of your show or presentation, everything packs away quickly and neatly, which
means that build and dismantling times are significantly reduced. You can re-use your
T3Airframe kit time and time again. Transportation and storage are easy too. Quick,
easy and versatile - it all adds up to the perfect self-assembly exhibition kit.
Perfect for...
exhibition stands, presentation backdrops, product launches, display walls, road shows,
information panels, bars & counters, towers & showcases, retail interiors, point of sale,
etc…………………….
How T3Airframe works
The key components to T3Airframe are an aluminium tube both straight and curved and
a connector. These join together with a brilliantly simple, patented, twist-lock action, no
tools required. Straight and curved walls, towers, plinths and counters can all be
constructed very quickly using just these few basic parts.
Applying graphics to the framework is simple too. Magnetic tape on the sides, top and
bottom of the graphics locate easily onto the tubes in much the same way as a pop-up
kit. Long, flat or curved walls of seamless looking graphics can be successfully and
quickly installed. Velcro can also be used instead of the magnetic tape when rigid
panels are specified. T3 Airframe is very stable, easily supporting large plasma screens
or countertops and shelves for heavy display items. The square tube enables hinges,
sliding door sections and full size lockable doors to be fitted with the minimum of fuss.

9. Why use T3Airframe?
• Fast, easy assembly
• No tools required
• Strong, light frame
• Expandable and re-usable
• Easy to transport and store
• IF YOU HAVE THIS T3 KIT YOU CAN BOOK SPACE ONLY AS OPPOSED TO SHELL
SCHEME. THEREFORE SAVING YOU MONEY ON YOUR SPACE.
Freestanding Frame
ITEM Amount Cost per Item Total Cost
Needed
3.5mm Full Graphic Printed 7 £150.00 £1,050.00
Panel (2440mm x 1000mm)
T3 Airframe Kit Various Various £1,799.10
150W Long Arm Spot Lights 5 £55.00 £275.00
Large Wheeled Carry Case 1 £249.99 £249.99
Heavy Duty Carry Tubes 2 £25.00 £50.00
TOTAL £3,424.09
All prices exclude VAT, Delivery and Artwork if needed.
Appox weight – 80kg

10. • Full Installation and transportation by Qdos (based on 3m x 3m Stand):
• NEC, Birmingham £300.00
We advise that you have Qdos install your kit for the first time so that you can be
shown and taught how to look after your kit and artwork panels. You will be shown how
the kit works and given all the tips as to the best and easiest way to install the kit and
graphic panels along with the correct order and method of taking the stand down.
These prices will be much reduced if we are at the show attended.
Along with installation we can dismantle your stand, transport it and store it at our
stores for 12 months providing that we install your stand at least 3 times this will be
free.
Once your items have been purchased the reinstallation fee is the only fee you
will/could incur. You can mix and match the above as you see fit. You do not need to
have any of the items listed and can install and dismantle easily yourselves. We are
here to help and will take your lead and help you in any way you require. Qdos can
deliver the equipment to you in transport tubes for you to take to the shows and Install
yourselves.
Examples of Previous T3 Solutions Provided

11. Fitting the T3 Shell Kit to an exhibition/display wall
Integrating T3 walls and structures within shell schemes is easy with the T3 Shell Kit
Clamp. The clamp fits all the major exhibition and event divider systems including
Octanorm, Foga, Modul, Syma, Unibox and Click and can be used with both Classic and
Channel T3 tubes. This makes it possible to create custom-looking displays with fabric,
flexible and rigid panels quickly, easily and very cost effectively.
The T3 Clamp also provides a quick and simple way of fixing a display framework to
existing walls of all types.
SMALL INSERT
For OCTANORM (Supplied as standard fitted to clamp)
MEDIUM INSERT
For FOGA, MODUL, SODEM, SYMA and Unibox (Supplied separately with clamp)
LARGE INSERT
For CLICK (Supplied separately with clamp) Locking inserts are interchangeable and
allow fixing of the T3 Shell Kit Clamp to all the major aluminium profile exhibition
systems.

12. Additional Items – Purchase (as detailed below)
Reception Counter (flat pack)
Price £400 to Include Graphics
Wheeled Carry Case (No Internal Shelf)
Price £249.99 Each
Lights
Price £55.00 Each
20 Litre Fridge
Price £150.00 Each
Two energy sources 12v & 240v (12v & mains leads included)

13. Cools to 20°C below ambient
LED temperature display
Quiet mini fridge cooling fan
Stylish grey finish
100% CFC and HFC-free
Weight 7.7kg; Size (H/L/W cm) 46 x 32 x 37
POSEUR TABLE
Price £190.00 Each
Chrome and Clear Glass Poseur Table
OVERALL HEIGHT: 1000MM
WIDTH: 600MM
LENGTH: 600MM
Stools
Price £100.00 Each
Product Features:
Voluptuous design with a gas lift mechanism
Available in four colours: red, black, brown or white
Seat made from PU leather
Base, stem and foot rest constructed from chrome
Measurements:
Overall height – 840-1060mm
Seat height – 620-840mm
Width 600mm
Depth – 470mm
LG 32” LCD TV
Price £400.00 Each

14. The LCD Television from LG boasts a high dynamic contrast of 30,000:1 and includes
advanced image processing technologies such as XD Engine, as well as an MPEG digital
tuner, to take your entertainment further than ever.
Plasma 32" LCD Flight Case
Price £350.00 Each
Technical Details:
Heavy duty fittings.
4" castors.
Black hexaboard 9mm finish.
Will fit all 32" Plasmas. .
Meets all ATA Specifications.
Foam lined to suit your Plasma.
Leave Hanging bracket on (if applicable)
TV Stand
Price £510.00 Each
Twin column cantilever design chosen by commercial video users everywhere. Wide
selection of component parts enables stands & trolleys of varying types to be easily
assembled.
* Stand Height to centre of screen based on column set 592 - is 141cm.
* Trolley, Plinth, or Bolt Down versions available.
* AV users regard VS1000 Stands & Trolleys as the 'work horse' of the industry.
* Glass or Steel Shelves are available also Locking Cabinets.

15. Your Quotation
To Purchase Items
ITEM Cost per Panel / Item
3.5mm Full Graphic Printed Panel (2440mm x
1000mm) £150.00
Or
3mm Foamex Boards £109.00
Or
1mm Foamalux £96.00
T3 Airframe Kit Various
Re-useable carpet squares, edging ramps & bags Approx £40.00 Per SQM
Lockable Reception Counter (Flat packed in a bag) Used once previously £400.00
Fridge to fit in Counter £150.00
Poser Table £190.00
Stool £100.00
32” Plasma £450.00
Flight case for plasma £350.00
TV Stand £510.00
All prices exclude VAT, Delivery and Artwork if needed.
Once your items have been purchased the reinstallation is the only fee you will/could
incur. You can mix and match the above as you see fit. You do not need to have any of
the items listed and can install and dismantle easily yourselves. We are here to help and
will take your lead and help you in any way you require. Qdos can also store all of your
items and deliver & install your complete stand. Prices available upon request.
(All prices subject to change and Qdos reserve the right to withdraw items
from sale.)