Published patent and design registration information december 18th, 2015

The Patent Office Journal 18/12/2015 65536
पेटेंट कार्ाालर्
शासकीर् जर्ाल
OFFICIAL JOURNAL
OF
THE PATENT OFFICE
नर्र्ामर् सं. 51/2015 शुक्रवार दिर्ांक: 18/12/2015
ISSUE NO. 51/2015 FRIDAY DATE: 18/12/2015
पेटेंट कार्ाालर् का एक प्रकाशर्
PUBLICATION OF THE PATENT OFFICE

INTRODUCTION
In view of the recent amendment made in the Patents Act, 1970 by the Patents (Amendment) Act, 2005
effective from 01st
January 2005, the Official Journal of The Patent Office is required to be published under
the Statute. This Journal is being published on weekly basis on every Friday covering the various proceedings
on Patents as required according to the provision of Section 145 of the Patents Act 1970. All the enquiries on
this Official Journal and other information as required by the public should be addressed to the Controller
General of Patents, Designs & Trade Marks. Suggestions and comments are requested from all quarters so that
the content can be enriched.
( Om Prakash Gupta )
CONTROLLER GENERAL OF PATENTS, DESIGNS & TRADE MARKS
18TH
DECEMBER, 2015

CONTENTS
SUBJECT PAGE NUMBER
JURISDICTION : 65539 – 65540
SPECIAL NOTICE : 65541 – 65542
LIST OF HOLIDAYS FOR THE YEAR-2016 (ENGLISH) : 65543
LIST OF HOLIDAYS FOR THE YEAR-2016 (HINDI) : 65544
EARLY PUBLICATION (DELHI) : 65545 – 65564
EARLY PUBLICATION (MUMBAI) : 65565 – 65586
EARLY PUBLICATION (KOLKATA) 65587 – 65588
PUBLICATION AFTER 18 MONTHS (DELHI) : 65589 – 66022
PUBLICATION AFTER 18 MONTHS (MUMBAI) : 66023 – 66082
PUBLICATION AFTER 18 MONTHS (CHENNAI) : 66083 – 66442
PUBLICATION AFTER 18 MONTHS (KOLKATA) : 66443 – 66902
PUBLICATION U/S.60 IN RESPECT OF APPLICATION
FOR RESTORATION OF PATENTS ( KOLKATA) : 66903
PUBLICATION UNDER SECTION 43(2) IN RESPECT OF
THE GRANT (DELHI) : 66904 – 66906
THE GRANT (MUMBAI) : 66907 – 66909
THE GRANT (KOLKATA)
: 66910 – 66911
INTRODUCTION TO DESIGN PUBLICATION : 66912
THE DESIGNS ACT 2000 SECTION 30 DESIGN
ASSIGNMENT : 66913
REGISTRATION OF DESIGNS : 66914 - 66973

THE PATENT OFFICE
KOLKATA, 18/12/2015
Address of the Patent Offices/Jurisdictions
The following are addresses of all the Patent Offices located at different places having their Territorial
Jurisdiction on a Zonal basis as shown below:-
1 Office of the Controller General of Patents,
Designs & Trade Marks,
Boudhik Sampada Bhavan,
Near Antop Hill Post Office,S.M.Road,Antop Hill,
Mumbai – 400 037
Phone: (91)(22) 24123311,
Fax : (91)(22) 24123322
E-mail: cgpdtm@nic.in
4 The Patent Office,
Government of India,
Intellectual Property Rights Building,
G.S.T. Road, Guindy,
Chennai – 600 032.
Phone: (91)(44) 2250 2081-84
Fax : (91)(44) 2250 2066
E-mail: chennai-patent@nic.in
 The States of Andhra Pradesh,
Telangana, Karnataka, Kerala, Tamil
Nadu and the Union Territories of
Puducherry and Lakshadweep.
Near Antop Hill Post Office,S.M.Road,Antop Hill,
Mumbai – 400 037
Phone: (91)(22) 24137701
Fax: (91)(22) 24130387
E-mail: mumbai-patent@nic.in
 The States of Gujarat, Maharashtra, Madhya
Pradesh, Goa and Chhattisgarh and the Union
Territories of Daman and Diu & Dadra and Nagar
Haveli
5 The Patent Office (Head Office),
CP-2, Sector –V, Salt Lake City,
Kolkata- 700 091
Phone: (91)(33) 2367 1943/44/45/46/87
Fax: (91)(33) 2367 1988
E-Mail: kolkata-patent@nic.in
 Rest of India
Plot No. 32., Sector-14, Dwarka,
New Delhi – 110075
Phone: (91)(11) 2808 1921 – 25
Fax: (91)(11) 2808 1920 & 2808 1940
E.mail: delhi-patent@nic.in
 The States of Haryana, Himachal Pradesh, Jammu
and Kashmir, Punjab, Rajasthan, Uttar Pradesh,
Uttaranchal, Delhi and the Union Territory of
Chandigarh.
Website: www.ipindia.nic.in
www.patentoffice.nic.in
All applications, notices, statements or other documents or any fees required by the Patents Act, 1970
and The Patents (Amendment) Act, 2005 or by the Patents (Amendment) Rules, 2006 will be received
only at the appropriate offices of the Patent Office.
Fees: The Fees may either be paid in cash or may be sent by Bank Draft or Cheques payable to the Controller of
Patents drawn on a scheduled Bank at the place where the appropriate office is situated.

पेटेंट कार्ाालर्
कोलकाता, दिर्ांक 18/12/2015
•कार्ाालर्ों के क्षेत्राधिकार के पते
ववभिन्र् जर्हों पर स्थित पेटेंट कार्ाालर् के पते आंचभलक आिार पर िभशात उर्के प्रािेभशक अधिकार क्षेत्र के
साि र्ीचे दिए र्ए है:-
1 कार्ाालर् : महानर्र्ंत्रक, एकथव, अभिकल्प
तिा व्र्ापार धचहर्,
एंटोप दहल डाकघर के समीप,
एस. एम. रोड, एंटोप दहल, मुम्बई- 400 037, िारत,
फोर्: (91) (22) 24123311
फ़ै क्स: (91) (22) 24123322
ई. मेल: cgpdtm@nic.in
4 पेटेंट कार्ाालर्, िारत सरकार
इंटेलेक्चुअल प्रॉपटी राइट्स बबस्ल्डंर्, इंडस्थिर्ल इथटेट
एसआईडीसीओ आरएमडी र्ोडाउर् एररर्ा
एडजसेन्ट टु ईर्ल फ्लाथक, जी. एस. टी. रोड, र्ार्न्डी
चेन्र्ई - 600 032.
फोर्: (91)(44) 2250 2081-84
फ़ै क्स: (91)(44) 2250-2066
ई. मेल: chennai-patent@nic.in
 आन्र प्रिेश, तेलंर्ार्ा, कर्ााटक, के रल, तभमलर्ाडु
तिा पुडुचेरी राज्र् क्षेत्र एवं संघ शाभसत क्षेत्र, लक्षिीप
बौविक संपिा िवर्,
एंटोप दहल डाकघर के समीप,
एस. एम. रोड, एंटोप दहल, मुम्बई- 400 037,
फोर्: (91) (22) 24137701
फ़ै क्स: (91) (22) 24130387
ई. मेल: Mumbai-patent@nic.in
 •र्ुजरात, महाराष्ट्ि, मध्र् प्रिेश, र्ोवा तिा छत्तीसर्ढ़ राज्र् क्षेत्र एवं संघ शाभसत क्षेत्र,
िमर् तिा िीव, िािर और र्र्र हवेली.
कोलकाता, (प्रिार् कार्ाालर्)
सीपी-2, सेक्टर- V, साल्ट लेक भसटी,
कोलकाता-700 091, िारत.
फोर्: (91)(33) 2367 1943/44/45/46/87
फ़ै क्स:/Fax: (91)(33) 2367 1988
ई. मेल: kolkata-patent@nic.in
 िारत का अवशेष क्षेत्र
प्लॉट सं. 32, सेक्टर- 14, द्वारका, र्ई दिल्ली- 110 075.
फोर्: (91)(11) 2808 1921-25
फ़ै क्स: (91)(11) 2808 1920, 2808 1940
ई. मेल: delhi-patent@nic.in
हररर्ाणा, दहमाचल प्रिेश, जम्मू तिा कश्मीर, पंजाब,राजथिार्,
उत्तर प्रिेश, दिल्ली तिा उत्तरांचल राज्र् क्षेत्रों, एवं संघ शाभसत
क्षेत्र चंडीर्ढ़
वेबसाइट: http://www.ipindia.nic.in
www.patentoffice.nic.in
पेटेंट अधिनर्र्म, 1970 तिा पेटेंट (संशोिर्) अधिनर्र्म, 2005 अिवा पेटेंट (संशोिर्) नर्र्म, 2006 द्वारा वांनछत सिी आवेिर्,
सूचर्ाए, वववरण र्ा अन्र् िथतावेज़ र्ा कोई शुल्क पेटेंट कार्ाालर् के के वल उपर्ुक्त कार्ाालर् में थवीकृ त होंर्े।
शुल्क: शुल्क र्ा तो र्र्ि रूप में र्ा Controller of Patents के र्ाम में िेर् बैंक ड्राफ्ट र्ा चेक के द्वारा िेजी जा सकती है जो उसी थिार् के
ककसी अर्ुसूधचत बैंक में प्रित्त हो जहााँ उपर्ुक्त कार्ाालर् स्थित है ।

SPECIAL NOTICE
18 Months publication as required under Section 11A of the Patents Act, 1970
as amended by the Patents (Amendment) Act, 2005.
Notice is hereby given that any person at any time before the grant of Patent may give representation by way of
opposition to the Controller of Patents at appropriate office on the ground and in a manner specified under
section 25(1) of the Patents (Amendment) Act, 2005 read with Rule 55 of the Patents (Amendment) Rules,
2006.
Notice is also given that if any interested person requests for copies of the complete specification, drawing and
abstract of any application already published, the photocopy of the same can be supplied by the Patent Office as
per the jurisdiction on payment of prescribed fees of Rs.8/- per page. If any further details are required to be
obtained, the same can be provided by the respective Patent Offices on request.
(Om Prakash Gupta)
CONTROLLER GENERAL OF PATENTS, DESIGNS & TRADE MARKS

SPECIAL NOTICE
Under the new provision of the Patents Act, 1970 as amended by the Patents (Amendment) Act, 2005
and Rules there under, Publication of the matter relating to Patents in the Official Gazette of India Part III,
Section 2 has been discontinued and instead The Official Journal of the Patent Office is being published
containing all the activities of The Patent Office such as publication of all the patent applications after 18th
months , grant of patents & all other information in respect of the proceedings as required under the provisions
of the Patents (Amendment) Act, 2005 and Rules thereunder on weekly basis on every Friday.
The Journal is uploaded in the website every Friday. So Paper form and CD-ROM form of the Journal are
discontinued from 01/01/2009.
SPECIAL NOTICE
Every effort is being taken to publish all the patent applications under section 11(A) of the Patents Act.
However, if duplication of publication of any application is found, then earlier date of publication will be taken
for the purpose of provisional protection for applicant and Patent Office will grant Patent not before six months
from the date of second publication, provided that there is there is no third party representation.

Early Publication:
The following patent applications have been published under section 11A (2) of The Patents (Amendment) Act 2005 and rule
24A of The Patents (Amendment) Rules, 2006. Any person may file representation by way of opposition to the Controller of
Patents at the appropriate office against the grant of the patent in the prescribed manner under section 25(1) of the Patents
(Amendment) Act 2005 read with the rule 55 of The Patents (Amendment) Rules, 2006:
(12) PATENT APPLICATION PUBLICATION (21) Application No.10903/DELNP/2015 A
(19) INDIA
(22) Date of filing of Application :28/11/2015 (43) Publication Date : 18/12/2015
(54) Title of the invention : VERTICAL AXIS WATER/WIND TURBINE MOTOR USING FLIGHT FEATHER
OPENING/CLOSING WING SYSTEM
(51) International classification :F03D3/06,F03B1/02
(31) Priority Document No :2013110457
(32) Priority Date :25/05/2013
(33) Name of priority country :Japan
(86) International Application No
Filing Date
:PCT/JP2014/063758
:24/05/2014
(87) International Publication No :WO 2014/192664
(61) Patent of Addition to Application
Number
Filing Date
:NA
:NA
(62) Divisional to Application Number
Filing Date
:NA
:NA
(71)Name of Applicant :
1)TAMATSU Yoshiji
Address of Applicant :Room16Toyota Apartment1656 5Aza
OrokuNaha shi Okinawa 9010152 Japan
(72)Name of Inventor :
1)TAMATSU Yoshiji
(57) Abstract :
In order to enhance the startability of a vertical axis combined water/wind turbine motor composed of a drag type and a lift
type starting performance is improved by releasing convex surface resistance produced by a drag type blade going against a fluid and
increasing rotation torque by reduction in resistance during rotation at high speed higher than or equal to the speed of the fluid which
is the characteristic of a lift type blade all wing surfaces of the drag type are naturally brought into an open state by the lift type blade
rotation speed to thereby maintain lift type high speed rotation efficiency performance by reducing resistance at the center of the
vertical axis combined water/wind turbine motor in a wide range of fluid speed area and danger when the fluid speed increases is
avoided by producing a fully open state by rolling in flight feathers of a drag type wing surface configuration by decreasing the entire
volume by folding wing surfaces to the rotation shaft side or by decreasing the entire structure and reducing resistance by eliminating
passive surfaces by decreasing the wing area by drawing flight feathers of the wing surface toward the rotation center.
No. of Pages : 47 No. of Claims : 10

(12) PATENT APPLICATION PUBLICATION (21) Application No.3648/DEL/2015 A
(19) INDIA
(54) Title of the invention : SITABY: THE POSTURE PROCTOR
(51) International classification :G06F7/04
(31) Priority Document No :NA
(32) Priority Date :NA
(33) Name of priority country :NA
Filing Date
:NA
:NA
(87) International Publication No : NA
(61) Patent of Addition to Application Number
Filing Date
:NA
:NA
Filing Date
:NA
:NA
1)DR.LOVI RAJ GUPTA
Address of Applicant :JALANDHAR DELHI G.T. ROAD
(NH-1), PHAGWARA, PUNJAB, INDIA PIN-144411 Punjab
India
2)MS.Y.PRASANTHI
3)MR.M.SATISH REDDY
4)MR.KUNAL PANCHAL
5)MR.PANKAJ P SHINDE
1)DR.LOVI RAJ GUPTA
2)MS.Y.PRASANTHI
3)MR.M.SATISH REDDY
4)MR.KUNAL PANCHAL
5)MR.PANKAJ P SHINDE
(57) Abstract :
Sitting is bliss to the human; it is posture which is most widely used by the people for work, travel, dinning, and entertainment.
Almost for every action which does not primarily require locomotion and standing requires sitting. It comes with the curse as well, if
the posture of sitting is erroneous and also if the length of sitting period gets extended which in todays context is happening gladly
owing the work hours and need for working while sitting. These posture nuisances have raised the clinical disorders of back and spine
largely. Each one Of us in the evening is sick of sitting wrongly or of sitting that extra hour. The need is to have a stance guardian,
which in turn looks to.the posture in real time and alerts for correcting the posture. Also if one is sitting for long, the alert for standing
and moving a couple of steps for apt blood circulation are there. The aforesaid menaces has resulted in fatal or near fata back and
spine injuries and the clinician are unaware about the habitual stance and the wrongdoings of the patients.during sitting. SitAby is the
solution to this all, a device mounted on the seat, be it a working or dinning chair, a car or an airplane seat, a perfect Internet of Things
(IoT) device which is wireless for the ease of usage, intelligent, connected and has a strong and uniquely designed back end. The data
is captured in real time from innovating designed data point arranged in a matrix, this is then transmitted to the data cloud where the
archival and analysis is done and on the basis of the current postures, an alert, if needed, is sent to the user for stance correction. This
data is also archived for future referencing, crafting exercises and procedures for better sitting. The data archival can be seen by the
clinician and the physiotherapists for pinpointed diagnosis and redressal. SitAby is going to be a game changer in stance correction,
ailment eradication and habit breaking of erroneous sitting, thus making society healthier and happier.

(19) INDIA
(54) Title of the invention : SOLAR CHARGE MANAGING SYSTEM AND METHOD THEREOF
(51) International classification :H02J7/35
Filing Date
:NA
:NA
Filing Date
:NA
:NA
Filing Date
:NA
:NA
1)ASHOK KUMAR GUPTA
Address of Applicant :D-403, Sahara Plaza, Vikas Khand-1,
Gomti Nagar, Lucknow-226010, Uttar Pradesh, India. Uttar
Pradesh India
2)ASOK SEN
1)ASHOK KUMAR GUPTA
2)ASOK SEN
(57) Abstract :
Exemplary embodiments of the present disclosure are directed towards solar charge managing system and method thereof. The system
includes a charge controller unit electrically connected to a plurality of solar panels configured to control a charging action of two or
more batteries comprising smart control logic and an inverter electrically connected to the batteries configured to receive a
photovoltaic input and provide an alternating current output.

(19) INDIA
(54) Title of the invention : ARCHITECTURE AND DESIGN OF A NOVEL TOOL FOR INTELLIGENT GENERAL PURPOSE
QUESTION ANSWERING SYSTEM
(51) International classification :G06F17/50
Filing Date
:NA
:NA
Filing Date
:NA
:NA
Filing Date
:NA
:NA
1)POONAM TANWAR
Address of Applicant :FLAT NO. 904, TOWER-AIGBURTH
(BT-12),OMAXE HEIGHT SOCIETY, SECTOR 86,
FARIDABAD, HARYANA-121002, INDIA Haryana India
1)MS. POONAM TANWAR
2)DR.T. V. PRASAD
3)DR.KAMLESH DUTTA
(57) Abstract :
Question answering systems (QAS) requires bonding/direct connectivity between Artificial Intelligence (AI), Knowledge
Representation (KR), Information Retrieval (IR), Information Extraction (IE), Reasoning, etc. Now-a-days, QAS is applied to every
walk of life like designing expert systems, semantic web, robotics, auto answering machine, etc. Research in the area of QAS provides
an interface to the user for IR and IE. The objective of this QAS system is to provide an interactive environment with the real user.
User can select the question from the pool of questionnaire and put up to.QAS on real-time basis also. QAS is an intelligent system
that allows the user to ask simple as well as complex questions and gives the result not as link or paragraph but returns the exact
answer without delay. System aimed to design the general QAS by using the Semantic Network and Script technique to acquire the
knowledge and Natural Language Processing (NLP) to process the incoming knowledge. The idea was to improve the system
performance and the retrieval efficiency. The implemented system was tested using 100 stored questions and 250 newly entered
questions applied on different input collected from various sources like newspaper, internet and book, etc. The result of the QAS
shows that the use of Semantic Network, Script and NLP could greatly improve the system performance.

(19) INDIA
(54) Title of the invention : DISPENSING WITH FUEL FILTER IN 4-WHEELERS
(51) International classification :F02M37/04
Filing Date
:NA
:NA
Filing Date
:NA
:NA
Filing Date
:NA
:NA
1)ATAM TEJ ARORA
Address of Applicant :# 2390, BSNL HSG, SOCITY,
CHANDIGARH (UT), PIN-160047 Chandigarh India
1)ATAM TEJ ARORA
(57) Abstract :
ALL 4/MULTI-WHEELER VEHICLES RUNNING ON PETROl/DIESEL INVARIABLY MAKE USE OF FUEL FILTERS IN
THE FUEL SUPPLY LINES LEADING TO ENGINE TO AVOID CONTAMINATION OF THE SAME SO AS NOT TO BLOCK
ITS PASSAGE THROUGH CABURETTOR OR INJECTOR. THIS WHOLE PROCESS OF FILTERING THE FUEL CAN BE
MADE SIMPLE AND ALSO VERY ECONOMICAL BY MAKING USE OF A NATURAL DECANTATION PROCESS
CREATING AUTOMATIC FUEL FILTRATION WHICH SHALL NOT NEED ANY PHYSICAL FUEL FILTER IN THE ROUTE
OF THE FUEL TO THE ENGINE. THE GIVEN SPECIFICATION DESCRIBES HOW THIS PROCESS OF DECANTATION OF
FUEL CAM BE USED PRACTICALLY TO DISPENSE WITH THE FUEL FILTERS ALTOGETHER, WHAT TO TALK OF
REPLACING IT DURING ANY SERVICING/REPAIR OF THE AUTOMOBILE. THOUGH FILTRATION/DECANTATION
PROCESSES ARE SEEMINGLY OBVIOUS, THEY HAVE BEEN TYPICALLY DEPLOYED IN THIS INVENTION
DISPENSING WITH THE FUEL FILTER.

(19) INDIA
(54) Title of the invention : MAGLEV TYRE
(51) International classification :B61D15/12
Filing Date
:NA
:NA
Filing Date
:NA
:NA
Filing Date
:NA
:NA
1)VATAN CHAUDHARY
Address of Applicant :KHURJA, NEW SHIV PURI,
STREET-10, (UP) BULANDSHAR-203131 Uttar Pradesh India
1)VATAN CHAUDHARY
(57) Abstract :
Maglev tyre a type of mechanism which have ability to move any movable object it is independent in its own. It will not dependent on
any fuel any external force like engine, gas or any polluted energy that harm to nature itll work on a clean energy like electricity. It is
fully safe to environment there is no harmfull gas will released like (Carbon dioxide .... e.t.c) there will no vibration in movent like
engine vibration therell be no sound in mechanism. If we talk about friction there is too much friction in engine and parts are damaged
after some time in maglev tyre there is only air friction and that is minimum and itll also affect on our speed and there is a also no
need for super charger, turbo charger or any expensive fuel and gases like nitrox ther is only need for electricity. This is the fully
advanced technology that is based on simple mechanism in this technology there is no need for gears,fuels and clutch e.t.c. It is very
simple to drive we can drive it as fast as we want there is no pollution.

(19) INDIA
(54) Title of the invention : FUEL CAP WARNING INDICATOR
(51) International classification :B60K15/04,
Filing Date
:NA
:NA
Filing Date
:NA
:NA
Filing Date
:NA
:NA
1)JNS INSTRUMENTS LIMITED
Address of Applicant :PLOT NO.-4, SECTOR-3, IMT
MANESAR, GURGAON Haryana India
1)RAJESH SINGH
2)ARUN KUMAR SHARMA
3)ISHWAR SINGH
(57) Abstract :
The present subject matter relates to a fuel cap warning indicator for automotive vehicles which mainly includes a fuel tank to receive
fuel via a fuel inlet, a thread ended cylindrical tube inserted into the fuel inlet, a fuel cap screwed on the thread ended cylindrical tube,
and a fuel tank door pivotally connected to an extended portion of the thread ended cylindrical tube to cover the fuel cap and the fuel
tank. The arrangement for fuel cap warning indicator is also provided with a push switch compartment positioned beside the fuel inlet,
wherein the push switch compartment includes a push switch provided within the push Switch compartment to get pushed downward
by a lever via an integrated push pad protruding through a vertical gap in a door of the push switch compartment. The fuel cap
warning indicator provided in a vehicle information display instrument is actuated by downward push of the push pad on unscrewing
of the fuel cap. The present subject matter discloses a reliable, compact, less costly and a customers friendly fuel cap warning
indicator that indicates unclosed or partially closed fuel cap for automotive vehicles. REFER : FIG. 3

(19) INDIA
(54) Title of the invention : A SYSTEM AND METHOD FOR FACILITATING INTERPLANETARY DATA COMMUNICATION
BETWEEN AT LEAST TWO SPATIAL ENTITIES
(51) International classification
:H04L29/08,
H04L12/24
Filing Date
:NA
:NA
Filing Date
:NA
:NA
Filing Date
:NA
:NA
1)HCL Technologies Limited
Address of Applicant :B-39, Sector 1, Noida 201301, Uttar
Pradesh, India Uttar Pradesh India
1)SUNDARARAJ, Jayaramakrishnan
2)DEY, Sourav
(57) Abstract :
Disclosed is a method for facilitating interplanetary data communication between at least two spatial entities is disclosed. In order to
facilitate the interplanetary data communication, initially, data may be received from a plurality of orbital satellites orbiting around a
first spatial entity. Upon receiving the data, at least one communication protocol may be determined. Subsequently, the data may be
split into a plurality of data sub streams.Upon splitting the data, the plurality of data sub streams may be transmitted to one or more
LEO orbital satellites. Subsequently, each LEO orbital satellite may be enabled to relay the plurality of data sub streams to a Multipath
Forward Server (MPFS) and to CMDPS. Upon relaying the plurality of data sub streams, each data sub stream may be combined to
derive combined data at the CMDPS. The combined data may then forward to a research center for further analysis.

(19) INDIA
(54) Title of the invention : A SYSTEM AND METHOD FOR FACILITATING FUEL CONSERVATION IN A VEHICLE
(51) International classification :G05B13/02
Filing Date
:NA
:NA
Filing Date
:NA
:NA
Filing Date
:NA
:NA
1)HCL Technologies limited
Address of Applicant :B-39, Sector 1, Noida 201 301, Uttar
1)DHALIWAL, Jasbir Singh
(57) Abstract :
Disclosed is a system and method for facilitating fuel conservation in a vehicle. A registration module enables a plurality of vehicles
to register with the system. Each vehicle being registered intends to physically connect with another vehicle. A data capturing module
captures a cost to be incurred by each vehicle for connecting with the other vehicle as-well-as individual preferences associated with
each vehicle. The display module displays, on a user device associated with a requesting vehicle, a list of set of vehicles along with the
cost and the individual preferences. The selecting module selects a preferred vehicle, of the one or more vehicles, based upon the
individual preferences and the cost. The preferred vehicle is adapted to physically connect with the requesting vehicle and share at
least one of music and air-conditioning (AC) with the requesting vehicle based upon the music genre and the preferable temperature
respectively.

(19) INDIA
(54) Title of the invention : ANALYSIS OF LIVER CANCER IN THE LIGHT OF RELIABILITY ESTIMATION WEIGHTED
MAJORITY ALGORITHM & CONCEPT LEARNING THEORY
(51) International classification :G06F19/00,
Filing Date
:NA
:NA
Filing Date
:NA
:NA
Filing Date
:NA
:NA
1)DR.PRASUN CHAKRABARTI
Address of Applicant :SIR PADAMPAT SINGHANIA
UNIVERSITY, UDAIPUR-313601 Rajasthan India
2)MR. MANISH TIWARI
3)DR.TULIKA CHAKRABARTI
1)DR.PRASUN CHAKRABARTI
2)MR.MANISH TIWARI
3)DR.TULIKA CHAKRABARTI
(57) Abstract :
The reliability and mean time to failure of liver cancer testing system can be realized in the light of parallel system configuration. The
factors leading to liver. cancer can be analyzed on the basis of Weighted Majority Algorithm. The effect of alcohol consumption
leading to liver cancer can be sensed using the concept learning approach.

(19) INDIA
(54) Title of the invention : SMART GLASS CONTROL
(51) International classification :A47L1/02
Filing Date
:NA
:NA
Filing Date
:NA
:NA
Filing Date
:NA
:NA
Address of Applicant :B-39, Sector 1, Noida 201301, Uttar
1)WILSHER, Michael John
2)LEWIS, Jeremy Brook
(57) Abstract :
Disclosed is a method and system for controlling the opacity of smart glass in a vehicle. The method comprising, obtaining input data,
wherein the input data comprises vehicle data, environment data and driver data and determining a state of the vehicle and a state of
the driver of the vehicle based on the input data and predefined conditions. The method further comprising, generating a command
signal for enabling a change in the opacity of at least a section of smart glass in the vehicle based on the state of the vehicle and the
state the driver of the vehicle and changing selectively the opacity of at least a section of the smart glass using a control unit coupled
with the processor.

(19) INDIA
(54) Title of the invention : HEAT FLOW SENSOR
(51) International classification :G01K1/14,F24J2/40,F24J2/46
(31) Priority Document No :2013/0363
(33) Name of priority country :Belgium
Filing Date
:PCT/EP2014/056525
:01/04/2014
(61) Patent of Addition to
Application Number
Filing Date
:NA
:NA
(62) Divisional to Application
Number
Filing Date
:NA
:NA
1)COCKERILL MAINTENANCE & INGENIERIE S.A.
Address of Applicant :Avenue Greiner 1 B 4100 Seraing
Belgium
1)CARA Fabien
2)RUDAZ Daniel
3)DETHIER Alfred
(57) Abstract :
The present invention relates to a heat exchanger comprising a plurality of exchange tubes (1) mounted joined longitudinally in such a
way as to create a front surface portion (4) creating an obstacle to an incident heat flow and at least one heat flow sensor (5) disposed
in a support (12) located between two adjacent exchange tubes (1) characterised in that the support (12) of the heat flow sensor (5) is
brazed to at least one of the two tubes (1) and is flattened on the side that is to be disposed at the front (4) with reference to the
incident heat flow in such a way as to be able to be inserted between the two adjacent tubes (1) at the location of said local
deformations (11).

(19) INDIA
(54) Title of the invention : WORK VEHICLE CAB AND METHOD FOR MANUFACTURING SAME
(51) International classification :B62D25/06,B60R21/13,E02F9/16
(86) International Application
No
Filing Date
:PCT/JP2015/069050
:01/07/2015
(87) International Publication
No
:WO 2015/174552
(61) Patent of Addition to
Application Number
Filing Date
:NA
:NA
(62) Divisional to Application
Number
Filing Date
:NA
:NA
1)KOMATSU LTD.
Address of Applicant :2 3 6 Akasaka Minato ku Tokyo
1078414 Japan
1)WADA Takeshi
2)WATANABE Kentaro
(57) Abstract :
A work vehicle cab (6) is provided with a standard frame (21) and a reinforced beam (22). The standard frame has a main frame (23)
and a roof plate (44) and the main frame includes an upper left frame (34) and an upper right frame (37) which extend along the
front/rear direction and are separated from each other in the left/right direction. The roof plate is provided on the top surface of the
main frame and is attached to the upper left frame and the upper right frame. The reinforced beam is disposed over the roof plate is
attached to the upper left frame and the upper right frame and has an upwardly protruding shape.

(19) INDIA
(54) Title of the invention : A SYSTEM AND METHOD FOR DYNAMICALLY MODIFYING SETTINGS OF A
COMMUNICATION DEVICE
(51) International classification :H04B1/38,
Filing Date
:NA
:NA
Filing Date
:NA
:NA
Filing Date
:NA
:NA
1)SADASIVAM, SivaSakthivel
2)CHAUDHARY, Vishal
(57) Abstract :
Disclosed is a system for dynamically modifying settings of a communication device based on an activity state of a user of the
communication device. A data capturing module captures values corresponding to a plurality of physiological parameters associated to
a plurality of activity states of a user. The values may be captured by using one or more wearable devices worn by a user. A
configuration module enables the user to configure one or more rules and one or more events, to be triggered, corresponding to each of
the one or more rules for modifying settings of the communication device. An activity state determining module determines an activity
state, in real-time, from the plurality of activity states. An event triggering module triggers an event, of the one or more events, based
on a rule configured corresponding to the activity state in order to dynamically modify the settings of the communication device.

(19) INDIA
(54) Title of the invention : SOAPEN
(51) International classification :B05C17/06,
Filing Date
:NA
:NA
Filing Date
:NA
:NA
Filing Date
:NA
:NA
1)ANAND AMANAT
Address of Applicant :N-176, PANCHSHEEL PARK,1ST
FLOOR,NEW DELHI-110017 (INDIA) Delhi India
2)ISSAR SHUBHAM
3)BYUN JUNHO
4)AGRAWAL YOGITA
1)ANAND AMANAT
2)ISSAR SHUBHAM
3)BYUN JUNHO
4)AGRAWAL YOGITA
(57) Abstract :
SoaPen is a soap crayon which is markable on skin, and can be used to draw on the childs hand. The drawing turns into a soapy lather
when the child wets and rubs their hands. Soapen has a triangular shape, so that the soap cartridge retains a drawing edge at all times.
Further, the triangular form allows for the outer casing to be flat packable. This casing will be available in either polyethylene or
cardboard. Once the casing is assembled, a sticker bearing illustrated user instructions for universal comprehensibility seals the casing
in place. The casing is to be reused,. and the soap cartridges can be refilled over time. A pencil (or an object of similar dimension,) can
be inserted through the hole in the bottom of the cartridge holder, to remove the residual stub of soap, prior to inserting a new
cartridge.

(19) INDIA
(54) Title of the invention : A NOVEL NINE-PHASE SELF EXCITED INDUCTION GENERATOR
(51) International classification :H02K19/28,
Filing Date
:NA
:NA
Filing Date
:NA
:NA
Filing Date
:NA
:NA
1)DR.MOHD. FAISAL KHAN
Address of Applicant :ALIGARH MUSLIM UNIVERSITY,
ALIGARH, U.P.-202002, INDIA. Uttar Pradesh India
2)DR.MOHD.RIZWAN KHAN
1)DR.MOHD. FAISAL KHAN
2)DR.MOHD. RIZWAN KHAN
(57) Abstract :
This patent application is filed to report a novel nine-phase self excited induction generator (SEIG). Conventional variants of SEIGs
existing in literature pertain to single phase, three phase and six phase. In this application a NINE-PHASE SEIG (NP-SEIG) prototype
is developed. The performance of newly developed SEIG model is demonstrated for unity as well as inductive loads of 0.8 lagging
power factor. The step by step mathematical model of NP-SEIG is developed by advancing the concepts of three and six phase
models. In order to establish the veracity of proposed model beyond any doubt the computer simulation study is carried out by
implementing the developed mathematical model on Matlab/Simulink concurrent to the experimental analysis on implemented
prototype. A multi phase induction machine with open stator windings is utilized for experimental implementation of the invention.

(19) INDIA
(54) Title of the invention : SYSTEM AND METHOD FOR TESTING INTERNET OF THINGS NETWORK
(51) International classification :H04L12/26
Filing Date
:NA
:NA
Filing Date
:NA
:NA
Filing Date
:NA
:NA
1)JAIN, Parveen Kumar
2)RANGI, Vivek
3)MISHRA, Abhay
4)DHANYAMRAJU, S U M Prasad
(57) Abstract :
The present disclosure relates to system(s) and method(s) for generating test data for testing an Internet of Things (IOT) network.
Initially, the system is configured for receiving sensor ontology data of at least one sensor to be simulated for testing an Internet of
things (IOT) network. The sensor ontology data may include a range of operation of the sensor and a frequency of operation of the
sensor. Further, the system is configured for accepting a set of test scenarios for testing the IOT network. Furthermore, the system is
configured for generating master test data for testing the IOT network, wherein the master test data comprises a set of test packages
corresponding to the set of test scenario and the sensor ontology data.

(19) INDIA
(54) Title of the invention : BIOMETRIC CARD (B-CARD)
(51) International classification :G06K19/06
Filing Date
:NA
:NA
Filing Date
:NA
:NA
Filing Date
:NA
:NA
1)Dr. Shashi Bhushan
Address of Applicant :Professor, Department of Information &
Technology, Chandigarh Engineering College, Landran, Mohali-
140307, Punjab Punjab India
2)Jaspreet Singh
3)Ishant Raju
4)Nishant Raju
1)Dr. Shashi Bhushan
2)Jaspreet Singh
3)Ishant Raju
4)Nishant Raju
(57) Abstract :
The present invention relates to the hardware consists of a Biometric Card (B-CARD) for authentication which includes fingerprint
scanner embedded in it and a device named Mobile Card Authentication Device (MCAD). Biometric card has a thin fingerprint
scanner to scan the fingerprint of individual. The main circuitry of fingerprint scanner is in the MCAD or in the ATM machine. One
end of the card contains the fingerprint scanner and other end contains a copper strip that will connect the fingerprint scanner (which is
in the card) to its main circuit inside the machine (MACD/ATM). There is an indicator in the card which acknowledges the user when
it is connected to its main circuit. The MCAD is a mobile authentication device which connects the users card with the bank server
through computer or mobile phone using their internet data connection available. Credentials of the card along with user fingerprint
are sent in encrypted form to the bank server for the authentication through MCAD/ATM. This mechanism will ensure the actual
presence of client while money transaction is made from the account. This B-Card can also be used for any secure and reliable online /
card transactions. This hardware and methodology provides the reliable and secure authentication of the financial transaction made by
the clients and will help in decreasing the financial frauds globally. B-CARD has the high commercial potential to replace the current
ATM mechanism/procedure, online authentication or any other authentication technique/mechanism.

(19) INDIA
(54) Title of the invention : METHOD FOR PURIFICATION OF 18F LABELED CHOLINE ANALOGUES
(51) International classification :C07B59/00,A61K51/04
(33) Name of priority country :U.S.A.
Filing Date
:PCT/EP2014/061319
:02/06/2014
Number
Filing Date
:NA
:NA
Filing Date
:NA
:NA
1)TRASIS S.A.
Address of Applicant :Alle du VI Ao»t Sart Tilman B6a B
4000 Liege Belgium
1)MORELLE Jean Luc
2)OTABASHI Muhammad
3)PHILIPPART Gauthier
4)VOCCIA Samuel
(57) Abstract :
The present invention relates to a method for purification of 18F labeled choline analogues in a solution injectable to a
patient prepared using non gaseous synthesis paths comprising a step of solid phase extraction (SPE) purification using a solid
support wherein the solid support used in the solid phase extraction purification has the characteristic to retain impurities and reagents
from the solution but not the 18F labeled choline analogues.

(19) INDIA
(54) Title of the invention : FORMULATION AND PHARMACOLOGICAL SCREENING OF POLYPHYTO DISPERSIBLE
TABLET AS ANTILITHOGENIC AGENT
(51) International classification :B01F15/02,
Filing Date
:NA
:NA
Filing Date
:NA
:NA
Filing Date
:NA
:NA
1)DR.N.V.SATHEESH MADHAV
Address of Applicant :FACULTY OF PHARMACY, DIT
UNIVERSITY, DEHRADUN (UTTRAKHAND)-248009
Uttarakhand India
2)DR.KUMUD UPADHYAY
3)MR.ABHISHEK BHARDWAJ
1)DR.N.V.SATHEESH MADHAV
2)DR.KUMUD UPADHYAY
3)MR.ABHISHEK BHARDWAJ
(57) Abstract :
This invention explores a process methodology for preparing potent polyphyto dispersible tablets for the treatment of Antilithatic.
Initially the polyphyto mixture of Antilithatic agent was prepared by blending the suitable proportion of various Antilithatic plant part
based on the novel ideal tree concept phenomenon different phytomixture were prepared by geometrical mixing and blending process
later synthetic for its phytochemical standardization and in-vitro cell line, U.V. HPTLC, SEM Analysis, in-vitro, in-vivo activity for
antilithiatic and the results were compiled with marked polyherbal formulation cystone 50/100 mg dose. The phyto dispersible tablets
was prepared and evaluated for dispersibily for other parameter and result revealed significant and promising potent dosing level
antilithiogenic activity.

(12) PATENT APPLICATION PUBLICATION (21) Application No.1102/MUM/2015 A
(19) INDIA
(54) Title of the invention : Hard gelatin capsule manufacturing machine
(51) International classification :B65B1/06
Filing Date
:PCT//
:01/01/1900
Filing Date
:NA
:NA
Filing Date
:NA
:NA
1)DBDS Robotics Pvt. Ltd
Address of Applicant :B-38, NICE AREA, SATPUR, Nashik,
Maharashtra, India 422007 Maharashtra India
1)Goldie Anand
(57) Abstract :
Disclosed herein, is a capsule manufacturing machine that includes a table section, an automatics section, a greaser section, a dipping
section, an upper deck kiln and a lower deck kiln. Servo-driven components of all the sections help to control the capsule
manufacturing machine. Servo-driven components of the table section continuously guide a plurality of pin bars so that the plurality of
pin bars changes from their vertical position to horizontal position. Servo-driven components of the automatics section strips, trim and
join shells of capsule bodies and caps of the plurality of pin bars. Servo-driven components of the dipping section dip the plurality of
pin bars in a gelatin solution. Servo-driven components of the greaser section oil and clean the pins of the plurality of pin bars.

(19) INDIA
(54) Title of the invention : AUTO HEAD AND PIN BAR ASSEMBLY
(51) International classification :B60D1/34
Filing Date
:PCT//
:01/01/1900
Filing Date
:NA
:NA
Filing Date
:NA
:NA
1)goldie anand
(57) Abstract :
An automatics section for a capsule manufacturing machine includes a movable pin bar assembly, two non-movable auto heads and a
non-movable joiner block assembly. The two non-movable auto heads include two sets of collets, two sets of knife bars and two sets
of ejector rods. The non-movable joiner block assembly includes a set of joiner blocks. When the movable pin bar assembly reaches
the end of its vertical upward movement, two sets of strippers which are positioned near to the two non-movable auto heads strip
shells from pins of pin bars of a capsule body and a capsule cap. The two sets of collets receive the stripped shells and then they rotate
against the two sets of knife bars to trim extended length of the shells. The two sets of ejector rods push the shells into the set of joiner
blocks for joining to form a desired capsule.

(19) INDIA
(54) Title of the invention : Bar tilting guide system
(51) International classification :B28B7/16
Filing Date
:PCT//
:01/01/1900
Filing Date
:NA
:NA
Filing Date
:NA
:NA
1)Goldie anand
(57) Abstract :
A pin bar tilting guide system includes two cylindrical disks which are mounted on a front frame of a dipping section in a capsule
manufacturing machine. The two cylindrical disks have grooves to receive pin bars of a capsule body and a capsule cap. The rotation
of the two cylindrical disks results in rotation of the pin bars of the capsule body and the capsule cap.

(19) INDIA
(54) Title of the invention : AN IMPROVED DRUG-POLYMER COMPOSITION AND PROCESS OF PREPARATION THEREOF
:C07F
9/30
Filing Date
:NA
:NA
Filing Date
:NA
:NA
Filing Date
:NA
:NA
1)PATEL, Kirit Rambhai
Address of Applicant :2/A, Vijay Colony, Nr. Sardar Patel
Colony, Stadium Road, Naranpura, Ahmedabad Gujarat India
1)PATEL, Kirit Rambhai
(57) Abstract :
The present invention relates to an improved active or inactive pharmaceutical ingredient-polymer composition and process of
preparation thereof. In particular, the present invention relates to an improved active or inactive pharmaceutical ingredient-polymer
composition and process of preparation thereof wherein the monomer encapsulates particles of active or inactive pharmaceutical
ingredient at molecular level and with controlled polymerization process the monomer turns into the said polymer coat over the said
active or inactive pharmaceutical ingredient that facilitates the disclosed invention to be completed a single step process.

(19) INDIA
(54) Title of the invention : RESEARCH MODEL OF ADJUSTABLE CONCENTRIC TOWERS TO STUDY IMPACT OF TOWER
SHADOW ON FLICKER INITIATED IN WIND TURBINE
:F03D9/00,
F03D7/04
Filing Date
:NA
:NA
Filing Date
:NA
:NA
Filing Date
:NA
:NA
1)DATTA SAMPATRAO CHAVAN
Address of Applicant :AMRUT KAILASH NAGRI, C-
203,S.NO.34/13A, AMBEGAON
BUDRUK, BEHIND BHARTI VIDYAPEETH, KATRAJ, PUNE
411046 Maharashtra India
2)Parashuram Balwant Karandikar
3)Rajesh giri
4)Puneet Singh
3)Rajesh giri
4)Puneet Singh
5)Prerit bhatnagar
6)Yuvraj Singh
7)Abhishek Panda
8)Athul Raj
(57) Abstract :
This invention is about the scaled down facility i.e. research model to find the impact of tower shadow effect on voltage flicker
initiated in the wind turbine output is developed. Concentric towers are developed using steel or any other suitable material pipes. The
length of the pipe can be adjusted by sliding the pipe. Nut and bolts are used to fix the length of the pipe. Three types of towers with
different pipe dimensions are available in the setup.

(19) INDIA
(54) Title of the invention : TECHNOLOGICAL DEVICE TO ASSIST USERS IN MANAGING THEIR EXERCISE REGIME
(51) International classification :A63B71/00
Filing Date
:PCT//
:01/01/1900
Filing Date
:NA
:NA
Filing Date
:NA
:NA
1)Pratik Saraogi
Address of Applicant :1204 MELODY, KESAR HARMONY,
SECTOR 6, KHARGHAR, NAVI MUMBAI 410210.
MAHARASHTRA, INDIA. Maharashtra India
1)Pratik Saraogi
(57) Abstract :
The present invention is a wearable technological device which can monitor and track the exercise regime of the exerciser which
includes capturing data on the exercises being followed, weight being lifted, repeating the exercises, the range of motion and the
deviation around it, which with the help of algorithms and motion detectors set would alert the users and other such data. This device
is connected wirelessly and will transfer data to a computer and the data can then analyzed for action to be taken such as change of
exercise regime and / or other utilities. Further the present device is also used to gather information such as weights used, exercise
time, number of repetitions/sets, biological or pathological information or data like heart rate, blood pressure, respiration rate, body fat
level, hydration etc

(19) INDIA
(54) Title of the invention : SERVM (SWIVELING ELECTRONIC REAR VIEW MIRROR)
:B60R
1/00
Filing Date
:NA
:NA
Filing Date
:NA
:NA
Filing Date
:NA
:NA
1)CHINMAY V JOSHI
Address of Applicant :SHREELEELA, A-10, PCMC
OFFICERS HSG. SOC., SEC 26, PRADHIKARAN, NIGDI,
PUNE-411 044, MAHARASHTRA, INDIA. Maharashtra India
2)SHRINIVAS A. JORAPUR
1)SHRINIVAS A. JORAPUR
2)CHINMAY V JOSHI
(57) Abstract :
Efforts are to be taken to minimize the risks associated while driving to avoid accidents. Regarding rear view mirrors, it was observed
that the current conventional rear view mirrors are inefficient to give the complete details of the traffic beside and behind his vehicle
due to its restricted view angle inspite of the concaveness provided to it. Its greater extent of inefficiency is observed when the roads
are twisting ie, while travelling through ghat sections, due to continuous turns, the current conventional rear view mirrors are not able
to continuously provide the location of the vehicles on the tail as they tend to get laterally displaced at corners. Our invention will
allow the driver to get a wider range of view angle of surrounding traffic and thus get. its better judgement which will inturn reduce
the risk of occurrence of mishap to a great extent. Our invention involves swiveling of the rear view mirrors which can be actuated on
pressing the button provided on the steering wheel. On pressing the button, the mirrors will swivel to, from current position to
maximum external position slowly and then swivel back slowly to their original position when the button on steering wheel is
released. The whole system is compact and doesnt require any extra space. This new invention can definitely be incorporated in the
newly manufactured automobiles but also it can be mounted on the in use existing vehicles with small modifications.

(19) INDIA
(54) Title of the invention : INSIDE OVERTAKING MIRRORS.
:B60R
1/00,
B60R
21/00
Filing Date
:NA
:NA
Filing Date
:NA
:NA
Filing Date
:NA
:NA
1)SHRINIVAS JORAPUR
Address of Applicant :FLAT NO.9, SWAMI ANGAN APPT.,
CDC-84, PURNANAGAR, CHINCHWAD, PUNE-411 019,
MAHARASHTRA, INDIA Maharashtra India
2)CHINMAY JOSHI
1)SHRINIVAS JORAPUR
2)CHINMAY JOSHI
(57) Abstract :
A provision has been made for the drivers to overtake easily and without any worry and avoiding accidents.Often drivers are very
anxious about overtaking and may sometimes loose cool and may constantly blow horn to front vehicles. And sometimes without
knowing presence of the front left side vehicles and thus causing accidents.So to overcome this problem,2 simple mirrors(combination
of concave and plane) should be in such a manner that we can see any sort of obstruction.The rays fall on mirror X(concave) followed
by falling on mirror Y (plane) and thus reflected towards human eye.Thus we come to know what is there and whether to overtake or
not and thus avoiding accidents.There is no need to depend on co driver for giving the instructions.This would help who drive
alone.As per the dimensions of the vehicle,size,mirrors should be placed accordingly.As minors are being used instead of camera, the
cost of system is negligible compared to cost of vehicle.Further to close down the mirrors, electronic adjustment can be done. And
mirrors can easily replaced by a new one if any fails/breaks.

(19) INDIA
(54) Title of the invention : LABORATORY MODEL OF WIND TURBINE BLADE FITTING MECHANISM TO TEST VARIOUS
BLADES
:F03D1/00,
F03D7/00,
Filing Date
:NA
:NA
Filing Date
:NA
:NA
Filing Date
:NA
:NA
203,S.NO.34/13A, AMBEGAON BUDRUK, BEHIND BHARTI
VIDYAPEETH, KATRAJ, PUNE - 411046 Maharashtra India
3)Puneet Singh
4)Rajesh giri
3)Puneet Singh
4)Rajesh giri
5)Abhishek Panda
6)Yuvraj Singh
7)Prerit Bhatnagar
8)Athul Raj
(57) Abstract :
In this invention two blade fitting mechanism are developed. In these mechanisms various types of blades can be fitted. The pitch
angle of the blade can also be varied.In the first mechanism, cylinders are welded to the hub. Another cylinder with small diameters is
welded to a metallic square strip, which is welded to the blade with one square plate. This small cylinder is concentric to the cylinder
which is welded to the hub. Blade can be fixed to the small cylinder using nut and bolt arrangement. The blade can be changed. The
blade of desired shape can be fixed to the cylinder. The pitch angle of the blade can be changed by rotating the concentric cylinder.
The holes are drilled along the length of both the cylinders. The holes are also drilled along the periphery of the cylinder. The pitch
angle can be fixed by nut and bolts passing through the holes of the cylinders.In the second mechanism three brackets are mounted on
to the hub using nut and bolt, they can be adjusted according to the required pitch angle. The blades will be then connected to the
bracketsusing 2 nuts and 2 bolts, which will be fixed throughout the experimentation. The pitch angle for all three blades is kept
constant. This mechanism can be placed in the laboratory test setup. Artificial wind can be created using the blower fans. The impact
of blade shape and pitch angle on the output voltage flicker can be observed on digital storage oscilloscope.

(19) INDIA
(54) Title of the invention : RESEARCH MODEL OF MULTIPLE TOWERS FIXING ARRANGEMENT TO ASSESS IMPACT OF
WAKE EFFECT IN A WIND FARM
:G01S17/95,
F03D 11/00
Filing Date
:NA
:NA
Filing Date
:NA
:NA
Filing Date
:NA
:NA
203,S.NO.34/13A, AMBEGAON
BUDRUK, BEHIND BHARTI VIDYAPEETH, KATRAJ, PUNE
3)Puneet Singh
4)Rajesh giri
3)Puneet Singh
4)Rajesh giri
5)Yuvraj Singh
6)Prerit bhatnagar
7)Abhishek Panda
8)Athul Raj
(57) Abstract :
This invention is related to study the impact of wake effect on the flicker initiated in the wind turbine voltage and other power quality
parameters. In the test setup there is a provision of number of various types of towers in the test setup. Tower height and tower
placement can be done on scaled down basis. Laboratory grade model of part of wind farm is proposed for prediction of voltage
flicker and other power quality parameters of actual wind farm. The angle of the tower which is fixed behind the every fitted tower is
can be changed. For fixing the tower at a particular angle the cylindrical slots are provided. The towers can be fixed in the cylindrical
slots. The protractor is painted at the bottom surface of the test setup. The angle between the towers can be easily measured. The
impact of wake effect on the flicker initiated in the output voltage of the wind turbine can be recorded for different angles between the
towers with respect to the tower which is placed in front of the towers. The wake effect can be studied for different wind speeds. The
wind speed can be varied by using blower fans and speed regulators. Results regarding voltage flicker and other power quality
parameters can give idea of their values in onsite situation with same angle and other situations.

(19) INDIA
(54) Title of the invention : ULTRA HIGH VALUE RESISTOR AS HIGH VOLTAGE NETWORK COMPONENT
:H01C
17/00
Filing Date
:NA
:NA
Filing Date
:NA
:NA
Filing Date
:NA
:NA
1)SANJAY D KEMKAR
Address of Applicant :701/C,PINNACLE BLDG, VASANT
OSCAR COMPLEX, LBS MARG, MULUND(W), MUMBAI,
PIN-400080. Maharashtra India
1)SANJAY D KEMKAR
2)SANJANA KEMKAR
3)MILIND VAIDYA
(57) Abstract :
Present invention is for making ultra high value resistor as AC electrical network component for industrial application. This device
will be useful for AC high voltage application as its value obtained is moderately high. The materials used for making high / ultra high
value of resistors are colloidal suspensions made of fine nano particles. Passive ultra high value resistors have been designed. Their
range was of order of thousands of mega ohms and nanofluid suspension comprises of nano particles with dimensions in the
nanometer range comprises of various volumetric concentrations up to at least 24%. Very high value resistor have been fabricated and
used as high potential sensing device. Extensive measurements have been carried out at 300 K as the device is likely to be used more
in this temperature range. In industry, use of value of resistance is widely used because of potential drops involved in those
applications. Therefore instead of conductivity the resistance parameter is used wherever necessary when referred to device as a
component.

(19) INDIA
(54) Title of the invention : AUTOMATIC SUGARCANE JUICE EXTRACTOR
:B30B
9/00
Filing Date
:NA
:NA
Filing Date
:NA
:NA
Filing Date
:NA
:NA
1)Nilkantha Dashrath Gadakh
Address of Applicant :Sukene Road, At/Post-Chandori, Tal-
Niphad, Dist-Nashik Maharashtra India
1)Nilkantha Dashrath Gadakh
(57) Abstract :
An automatic sugarcane juice extractor has storage space for storing pieces of sugarcane, hopper with feeding mechanism for
automatic feeding of pieces of sugarcane from diameter of 20 to 50mm into juice extractor. Juice extractor providing three stages of
squeezing in single pass of sugarcane. One roller in final stage is adjustably mounted respective to adjacent crushing roller and its
position is controlled through roller gap manipulator according to diameter of sugarcane. Diameter of Sugarcane which is going to
feed in juice extractor is measured and control system manipulate roller gap in final stage very soon. Control system can adjusted for
maximum juice extraction efficiency irrespective to diameter and variety of sugarcane. Crushing rollers are enclosed with covers and
closure completely even when sugarcane is passing through rollers. Also automatic feeding helps to extract juice from sugarcane
without manual handling of sugarcane and making juice extraction extremely safe and hygienic.

(19) INDIA
(54) Title of the invention : HELICAL ANTENNA LOADED IN A TRIANGULAR CAVITY FOR AEROSPACE
COMMUNICATION
:H01Q
1/00,
H01Q
11/00
Filing Date
:NA
:NA
Filing Date
:NA
:NA
Filing Date
:NA
:NA
1)THAKUR COLLEGE OF
ENGINEERING&TECHONOLOGY
Address of Applicant :SHYAMSUNDAR THAKUR
MARG,THAKUR VILLAGE,KANDIVALI EAST,MUMBAI-
1)DR.VINITKUMAR JAYAPRAKASH DONGRE
2)DR. B.K MISHRA
(57) Abstract :
In one of the important aspect of the invention it is provided that a compact size antenna/s for aerospace communication, the helical
antenna is enclosed in a triangular cavity, the shape of the cavity has an effect on the electromagnetic radiation from and to the
antenna. The triangular cavity has designed in order to confine the electrical field of helical antenna which results is the multi band
operation and higher power handling capacity of the antenna, the dimensions of the cavity and the helix is determined for multiband
operation of the communication which is determined by measurement of Reflection coefficient;

(19) INDIA
(54) Title of the invention : Drop chute conveyor
(51) International classification :B65G11/08
Filing Date
:PCT//
:01/01/1900
Filing Date
:NA
:NA
Filing Date
:NA
:NA
1)Goldie anand
(57) Abstract :
Disclosed herein, is a drop chute conveyor system that improves the productivity of a capsule manufacturing unit by increasing the
speed of formation of the capsules. The drop chute conveyor system includes joiner blocks, a hopper and a conveyor belt. Capsules
ejected from the joiner blocks fall onto the conveyor belt via the hopper. The presence of the hopper removes the risk of loss and
wastage of capsules due to physical damage.

(19) INDIA
(54) Title of the invention : Radial guide table section
(51) International classification :B23Q9/00
Filing Date
:PCT//
:01/01/1900
Filing Date
:NA
:NA
Filing Date
:NA
:NA
1)Goldie anand
(57) Abstract :
A table section for a capsule manufacturing machine includes two receiving tables, two sets of block chains, two bar lifters, four bar
positioners, two radial guides and a bar pusher. The two receiving tables move in vertical reciprocating motion to receive pin bars and
place them on to the two sets of block chains. The two bar lifters lifts each of the pin bar and places them adjacent to the two radial
guides. The four bar positioners that are present below the two radial guides, drag the pin bars on to the two radial guides. The pin bars
turn from a vertical position to a horizontal position as it covers a curvilinear path on the two radial guides. The bar pusher that is
positioned above the two radial guides pushes the pin bars into an automatics section of the capsule manufacturing machine.

(19) INDIA
(54) Title of the invention : Capsule gripping system
(51) International classification :B29C65/02
Filing Date
:PCT//
:01/01/1900
Filing Date
:NA
:NA
Filing Date
:NA
:NA
1)Goldie anand
(57) Abstract :
Disclosed herein is a gripper system used for effectively pulling off gelatin capsule halves solidified onto a set of pin bars. The gripper
system includes a shaft assembly and a pair of manifold assemblies which periodically reciprocates along a predefined axis so as to
peel off the gelatin capsule halves from the pin bars. The shaft assembly includes a first and second shaft whereas each of the pairs of
manifold assemblies include a pair of manifold holding blocks, a set of stripping jaws and a manifold. The first shaft and the pairs of
manifold holding blocks periodically reciprocates in a direction perpendicular to one another. The set of stripping jaws holds onto the
capsule halves so as to strip them off the pin bars and insert the stripped capsule halves into a series of collets.

(19) INDIA
(54) Title of the invention : SHANTILEX FOUNTAIN PIPE.
:A01G
25/06
Filing Date
:NA
:NA
Filing Date
:NA
:NA
Filing Date
:NA
:NA
1)MR. VIJAY SHANTILAL GUNDECHA
Address of Applicant :3046, SHANTILEX,
PARSHWANATH MARG, BARSHI DIST, SOLAPUR-413401,
MAHARASHTRA, INDIA Maharashtra India
1)MR. VIJAY SHANTILAL GUNDECHA
(57) Abstract :
The Invention is aimed to give irrigation solution for poor and economically backward farmers. Invention is helpful to assist micro
irrigation. It gives liberty to user of using the pipe wherever they wish to do irrigation of farm.lt is foldable,easy to carry and
economically affordable to purchase.In less amount of water quantity,less electricity farmers can grow their crops,plants and earn
income. It will help general farmers to invest minimum amount of money for their irrigation need compare to current irrigation
systems like drip pvc or sprinkler pvc irrigation.

(19) INDIA
(54) Title of the invention : METHOD AND SYSTEM TO CONVERT NATURAL LANGUAGE SENTENCES INTO PARTIAL
LAMBDA EXPRESSIONS
:G06F17/28,
G06F17/27
Filing Date
:NA
:NA
Filing Date
:NA
:NA
Filing Date
:NA
:NA
1)ABHISHEK MISHRA
Address of Applicant :J1003, PUDUMJEE GREENS, NEAR
ADITYA BIRLA HOSPITAL, THERAGON, CHINCWAD-
1)ABHISHEK MISHRA
(57) Abstract :
A Natural Language Processing (NLP) based method and system to convert natural language sentences into lambda expressions is
provided. The method includes entering a plurality of sentences described in natural language, tokenizing each word in the plurality
of sentences, categorizing the words into parts of speech (POS), parsing the tokenized word with parts of speech (POS), recognizing
entity in the words in said each word in said plurality of sentences, combining recognized entity with POS to obtain words, which are
represented as nodes, generating a graphical representation of the nodes using a directed acyclic graph (DAG) and converting the
DAG into a partial lambda expressions.

(19) INDIA
(54) Title of the invention : AN INTEGRATED SENSING AND LEARNING SCHEME USING UNSUPERVISED LEARNING
OUTLINE PERFORMING ENHANCED DYNAMIC SPECTRUM ALLOCATION FOR AREAL TIME COGNITIVE RADIO
NETWORK
:H04W
16/00,
H04W
72/00
Filing Date
:NA
:NA
Filing Date
:NA
:NA
Filing Date
:NA
:NA
1)MS.MITHRA VENKATESAN
Address of Applicant :201, F2 SHELDON, SUKHWANI
CAMPUS PHASE-2, VALLABH NAGAR, PIMPRI, PUNE-411
008, MAHARASHTRA, INDIA. Maharashtra India
1)MS.MITHRA VENKATESAN
2)DR.A.V KULKARNI
(57) Abstract :
The present invention is an integrated sensing and learning outline leading to Dynamic Spectrum Allocation towards a real time
Cognitive Radio system. In present embodiment, weight based decision making algorithm using double threshold technique is used
considering dynamic locations of the user which shows improvement in sensing performance. In present embodiment, the learning is
accomplished using unsupervised learning schema of self organizing technique which results in superior learning outline.
Subsequently, the integrated sensing and learning schema aids in improved Dynamic Spectrum Allocation using Particle Swarm
Optimization. The present embodiment can be extended with increased number of nodes for real life large scale situations.

(12) PATENT APPLICATION PUBLICATION (21) Application No.3264/MUMNP/2015 A
(19) INDIA
(54) Title of the invention : EFFICIENT CODING OF AUDIO SCENES COMPRISING AUDIO OBJECTS
(51) International classification :G10L19/008
Filing Date
:PCT/EP2014/060733
:23/05/2014
Number
Filing Date
:NA
:NA
Filing Date
:NA
:NA
1)DOLBY INTERNATIONAL AB
Address of Applicant :Apollo Building 3E Herikerbergweg 1
35 NL 1101 CN Amsterdam Netherlands
1)PURNHAGEN Heiko
2)KJOERLING Kristofer
3)HIRVONEN Toni
4)VILLEMOES Lars
5)BREEBAART Dirk Jeroen
6)SAMUELSSON Leif Jonas
(57) Abstract :
inter aliaThere is provided encoding and decoding methods for encoding and decoding of object based audio. An exemplary encoding
method includes calculating M downmix signals by forming combinations of N audio objects wherein M=N and calculating
parameters which allow reconstruction of a set of audio objects formed on basis of the N audio objects from the M downmix signals.
The calculation of the M downmix signals is made according to a criterion which is independent of any loudspeaker configuration.

(19) INDIA
(54) Title of the invention : INSECT REPELLENT STRIP HOLDER
:A47B91/14,
F16M13/02
Filing Date
:NA
:NA
Filing Date
:NA
:NA
Filing Date
:NA
:NA
1)JYOTHY LABORATORIES LIMITED
Address of Applicant :Ujala House RamaKrishna Mandir
Road Kondivita, Andheri East Mumbai - Maharashtra 400059,
India Maharashtra India
1)MR, Jyothy
2)KAMATH, Sunil
3)RAO, Ananth
4)MAJUMDAR, Arunabha
5)MADASU, Rajaji
6)K, Radhakrishnan
(57) Abstract :
The subject matter described herein relates to a holder (100) for holding an insect repellent strip (302). The holder (100) includes a
sheet blank (102) having a plurality of lateral creases (104, 106, 108, 110). The plurality of lateral creases (104, 106, 108, 110)
provided on the sheet blank (102) allows the sheet blank (102) to get folded to form a rectangular tube-like structure having a plurality
of walls (202, 204, 206, 208, 210). Further, the holder (100) includes a strip holding member (122) for holding the insect repellent
strip (302). The strip holding member (122) is provided on one of the plurality of walls (202, 204, 206, 208, 210) of the holder (100).
The strip holding member (122) comprises a groove and a metal rivet disposed on the groove.

(19) INDIA
(54) Title of the invention : A PERIODONTAL BUR AND FILE
:A61C
3/00,
A61C
5/00
Filing Date
:NA
:NA
Filing Date
:NA
:NA
Filing Date
:NA
:NA
1)ROSHAN UDHAORAO SAKHARKAR
Address of Applicant :PLOT NUMBER 110 , DR MAHALLE
CLINIC LINE, NEW SUBHEDAR LAYOUT, POST:
AYODHYA NAGAR, NAGPUR 440024, MAHARASHTRA,
INDIA Maharashtra India
1)ROSHAN UDHAORAO SAKHARKAR
(57) Abstract :
A periodontal sheath bur and file for a dental instrument, said element configured to provide for abrasive action on gingival wall of
periodontal pocket and for cleaning, polishing action on tooth surface without abrading or damaging it, said element comprising: at
least a sheath head configured to ensconce an operative distal tip of said dental instrument, characterised in that, said sheath
comprising one of a plurality of features on its external surface, said feature configured to provide abrading action on gingival wall of
periodontal pocket and cleaning , polishing action on tooth surface without damaging it ; and at least an attachment for holding said
sheath at one end .

(12) PATENT APPLICATION PUBLICATION (21) Application No.1168/KOL/2015 A
(19) INDIA
(54) Title of the invention : A MULTI-LEVEL STRUCTURE FOR SOLAR POWER GENERATION
(51) International classification :H01G9/20
Filing Date
:PCT//
:01/01/1900
Filing Date
:NA
:NA
Filing Date
:NA
:NA
1)BIDYUT K. BHATTACHARYYA
Address of Applicant :Professor, Dept. of Electrical
Engineering, National Institute of Technology, Agartala, Jirania,
Tripura (West) India
2)SATHEESH REDDY JULAKANTI
1)BIDYUT K. BHATTACHARYYA
2)HOTA VENKATA SOMA SAI PHANI KIRAN
3)ANTARIKSHA SARKAR
4)SATHEESH REDDY JULAKANTI
(57) Abstract :
A MULTI-LEVEL STRUCTURE FOR SOLAR POWER GENERATION The present invention deals with a multi-level structure
comprising at least one central stationary trunk associated with one or more solar panels, for providing exposure through electronic
tracking system. The invention presented shows a structural modification in installation of solar panels in contrast to the generally
followed unit installation either on ground or on roof-tops. The solar PV units are proposed to be installed on step altitude varying
layered sections which rise from the ground platform around a central supporting structure. Differences in heights of each layer are
similar to branches of a tree. This layered mode of installing the PV’s gives freedom for up to three different movements which
currently is practiced up to two rotations.

(12) PATENT APPLICATION PUBLICATION (21) Application No.1255/KOL/2015 A
(19) INDIA
(54) Title of the invention : A NEW MEMBRANE INTEGRATED CLOSED LOOP SYSTEM FOR TREATING COMPLEX
INDUSTRIAL WASTEWATER TOWARDS RECOVERY AND REUSE
(51) International classification :C02F1/72
Filing Date
:PCT//
:01/01/1900
Filing Date
:NA
:NA
Filing Date
:NA
:NA
1)PAL, Parimal
Address of Applicant :Environment and Membrane
Technology Laboratory, Department of Chemical Engineering,
National Institute of Technology, Durgapur 713209, West Bengal,
India.
1)PAL, Parimal
(57) Abstract :
The present disclosure provides a system for treating wastewater containing contaminant species, wherein the system can include: (a)
a forward osmosis (FO) module including a FO feed chamber and a FO draw chamber separated by a forward osmosis membrane,
wherein a feed of wastewater flows into the FO feed chamber, and a draw solution containing a draw solute flows through the FO
draw chamber to induce a net flow of the wastewater feed through the membrane into the draw solution and thereby separating the
wastewater from its contaminant species; and (b) a nanofiltration module for separating the draw solution and water from a diluted
draw solution discharged from the FO draw chamber, supplying the separated draw solution to the FO draw chamber of the FO
module again, and discharging the separated water to outside. According to embodiments, the forward osmosis membrane of the FO
module can be a flat sheet membrane that remains in a horizontal plane on a perforated support in such a manner that the wastewater
feed and the draw solution flow tangentially in counter-current directions along the top and bottom surfaces of the membrane
respectively.

Publication After 18 Months:
The following Patent Applications have been published under Section 11A (3) of The Patents (Amendment) Act, 2005. Any
Person may file representation by way of opposition to the Controller of Patents at the appropriate office against the grant of
the patent in the prescribed manner under section 25(1) of the Patents (Amendment) Act, 2005 read with the rule 55 of The
Patents (Amendment) Rules, 2006:
(19) INDIA
(54) Title of the invention : CATIONIC LIPID CORDIARIMIDE HYBRID COMPOUNDS AND A PROCESS FOR
PREPARATION THEREOF
(51) International classification :A61K9/68
Filing Date
:NA
:NA
Filing Date
:NA
:NA
Filing Date
:NA
:NA
1)COUNCIL OF SCIENTIFIC & INDUSTRIAL
RESEARCH
Address of Applicant :ANUSANDHAN BHAWAN, RAFI
MARG, NEW DELHI - 110001, INDIA. Delhi India
1)BATHULA SURENDAR REDDY
2)VKK DURGA RAO
3)KOMAL SHARMA
4)M PRATHAP REDDY
5)DIBYENDU BANERJEE
6)DEEPENDRA KUMAR SINGH
(57) Abstract :
The present invention relates to the cationic lipid cordiaroimide hybrid compounds of formula I. The present invention provides a
process for preparation of these compounds is also being elaborated. The compounds described provides anticancerous activity against
cell lines including PC-3 (prostate cancer), HepG2 (liver cancer), MCF-7 (breast cancer) and NIH/3T3 (non cancer) cells. The
compound was also capable of inducing caspase-3 mediated apoptosis in HepG2 cells by arresting the cell cycle in the Gl phase.
Furthermore, the compound exhibited DNA ligase I inhibition. The present class of cationic lipid cordiarimide hybrids is likely to find
specific use in developing novel targeted therapies for liver and prostate cancers.

(19) INDIA
(54) Title of the invention : A PROCESS FOR THE PRODUCTION OF SULBACTAM SODIUM
(51) International classification :C07C
Filing Date
:NA
:NA
Filing Date
:NA
:NA
Filing Date
:NA
:NA
1)VARDHMAN CHEMTECH LIMITED
Address of Applicant :SCO-350-352 Sector 34-A Chandigarh
(INDIA). Chandigarh India
1)GUJRAL Rajinder Singh
2)VIG Ashwani
(57) Abstract :
Penicillanic acid 1 1-dioxide and esters thereof such as Sulbactam Sodium are used as antibacterial agents and also enhance the
effectiveness of several -lactam antibiotics against many -lactamase producing bacteria. A process for the production of crystal of
Sulbactam Sodium is disclosed here involving reaction of sulbactam acid and sodium salt in the presence of HCL and NaCl in an
organic medium.

(19) INDIA
(54) Title of the invention : NUCLEOTIDE SEQUENCE ENCODING HOMEOBOX- LEUCINE ZIPPER PROTEIN HAT22 (HD-
ZIP PROTEIN 22) FROM CORCHORUS OLITORIUS AND CORCHORUS CAPSULARIS AND METHODS OF USE
(51) International classification :A01H5/00,C12N15/82
Filing Date
:PCT/US2014/066772
:21/11/2014
Number
Filing Date
:NA
:NA
Filing Date
:NA
:NA
1)BANGLADESH JUTE RESEARCH INSTITUTE
Address of Applicant :Manik Mia Avenue, Dhaka ,1207
Bangladesh
1)ALAM ,Maqsudul
2)ISLAM, Mohammed, Shahidul;
3)AHMED, Borhan;
4)HAQUE,Mohammed, Samiul;
5)ALAM, Mohammed, Monjurul;
(57) Abstract :
The present invention relates to the isolated polynucleotide encoding homeobox -leucine zipper protein HAT22 (HD -ZIP protein 22)
from the plants and and corresponding polypeptide derived thereof. The present invention also relates to the plants having modulated
expression of a nucleic acid encoding a homeobox- leucine zipper HAT22 polypeptide or a homologue thereof , which has the ability
to modify , preferably to increase/enhance the fiber length, plant height, and/or plant biomass. More specifically , the invention relates
to polypeptides having homeobox- leucine zipper protein HAT22 activity , polynucleotides encoding these polypeptides, and methods
of making and using these polynucleotides and polypeptides. The present invention further provides vectors, expression constructs and
host cells comprising and/or consisting of the nucleotide sequences of the homeobox- leucine zipper protein HAT22 (HD- ZIP protein
22). The invention also provides methods for producing the said protein and methods for modifying the said protein in order to
improve their desirable characteristics. The said protein of the invention can be used in a variety of ways , including
increasing/enhancing the fiber length ,height and biomass of plants and fiber yield.

Published patent and design registration information december 18th, 2015

Published patent and design registration information december 18th, 2015

Recommended

Recommended

More Related Content

What's hot

What's hot (20)

Viewers also liked

Viewers also liked (7)

Similar to Published patent and design registration information december 18th, 2015

Similar to Published patent and design registration information december 18th, 2015 (20)

More from InvnTree IP Services Pvt. Ltd.

More from InvnTree IP Services Pvt. Ltd. (17)

Recently uploaded

Recently uploaded (20)

Published patent and design registration information december 18th, 2015