PSC TASK SPECIFIC GLOVE GUIDE-BOOK (3).pdf

TASK SPECIFIC
PSC
G U I D E B O O K

PSC TASK SPECIFIC GUIDE-BOOK
For the oil and gas industry, some 38 percent of insurance
claims are for hand injuries. This includes finger pinching,
severe cuts, and abrasions and cutting injuries. In many other
industries, hand injuries are the most common injury that
happens.
PSC brought in Impact Protection Gloves to India in 2009. Since
then, it has been selling over 10000s of pairs of Impact
Protection Gloves helping protect 1000s of workers across
drilling rigs, oil platforms and other heavy industries. Brands
marketed in India by PSC includes Ironclad, Mechanix, Ringers,
Superior Canada.
We stock a large variants of impact protection gloves and over
two dozen of non-impact variants for specific tasks in the
industry making us one of the largest stockiest for task specific
gloves in the industry. This combined with a dozen other
hands-free and hands-off tools like push/pull tools, taglines,
pipe lifters, cylinder lifters, slogging tool holders, etc. makes us
the hand safety specialist company in India.
When you have to be absolutely sure, trust us.
No one protects your hands better than we do !

IRONCLAD MECHANICS GLOVE
Synthetic Leather Reinforcement- reinforced in critical areas of
maximum durability.
TPR Cuff Puller
Compression Cuff System- Easy on/off operation with constant
snug fit.
Terry cloth sweat wipe.
When you need that perfect all round gloves with the minimalist
design to work with hand and power tools, the Ironclad
WorkCrew Utility Gloves is the glove of choice for top
professional. Lightweight, breathable material, Synthetic leather
palm, Seamless, rolled index finger with a snug fit, cuff puller,
terry wipe, compression cuff, reinforcement for better durability
are some of the features.
FEATURES:
Application Basic mechanical tasks. Available as WorkCrew
Utility Glove, Box Handler Glove, General Utility Glove (GUG) and
Heavy Utility Glove (HUG). Variant delivered as per availability.
IRONCLAD EXO UTILITY GLOVE
Perfect fit with the compression cuff system.
Terry Cloth sweat palm, so you don't need to take them off too
often.
Cuff Puller for easy donning and removal.
The ultimate light weight glove for light mechanical tasks in the
workshops or on-board vessels and rigs. With a terry cloth sweat
palm, cuff puller and synthetic palm, this product is ideal for tool
assembly or any application that requires great dexterity. EXPO
Utility from Ironclad, the makers of KONG Gloves, is available in
several colors and sizes from S to XXL and delivered as per
availability.
FEATURES:
Application Light mechanical tasks that require color- Black,
Orange, Yellow, Brown- Delivered as per availability.
Other Variant available with part number #EX02-MUG
Sizes: S, M, L, XL, XXL

IRONCLAD EXO PRO GLOOVE
Hook and Loop Closure when you need that snug fit during
work.
Embossed palm for a great look, dexterity and grip
Cuff Puller for easy donning and removal
The best mechanics style glove money can buy at Project Sales
Corp. With TPR Hook and Loop Closure, Neoprene padding on
back of hand for extra protection, a sweat wipe, reflective color
accents and a durable synthetic palm, this Ironclad EXO Pro
Glove is designed for professional mechanics working with
assembly operations. Incorporates the cuff puller for easy
donning and the embossed palms for a better grip and dexterity.
FEATURES:
Application Assembly Gloves with light back of hand protection.
Some variants have touch screen compatibility. Colors- Back, Hi-
Viz Orange, Hi-Viz Yellow, Brown - Delivered as per availabiltity.
IRONCLAD EXO IMPACT GLOVE
Impact Protection- Bak of hand TPR
Sweat Wipe- Terry cloth sweat wipe.
Cuff Puller
Hook and Loop- TPR Hood and Loop Closure
Anti-Vibe Palm- Vibration reducing reinforced palm.
Ultimate knuckle protection glove. A snug-fit mechanical gloves
style impact glove.
FEATURES:
Application Impact Protection Basic mechanical tasks that
require back of hand impact protection Some models have
touch-screen compatibility (IEX) colors- Black, Hi-Viz Orange, Hi-
Viz Yellow, Brown- Delivered as per availability.

KONG KNIT CUT5 IMPACT GLOVE
Open-cell foamed nitrile coating- proprietary formulation for
grip in fluids.
Padded Hi-Viz foamed nitrile palm.
EN388 cut level 5 out of 5.
IVE patent pending optical technology that extends the field of
visual recognition.
Proven maximum coverage impact protection on palms,
fingers, thumb, knuckles and metacarpal bones.
Duraclad saddle reinforcement on the thumb for better
durability
360-degree resistance; EN388 Level 5 out of 5
The new Ironclad Industrial Impact knit Cut 5 Grip is CE EN388
level 5 cut resistant glove. The Foamed-Nitrile palm is Hi-Viz and
padded for impact absorption and ideal for applications where
impacts are felt both on front and back of the hand. It's
lightweight, breathable and offer full back of hand protection on
the fingers, knuckles and metacarpal bones.
PALM FEATURES:
GLOVE FEATURES:
Application Tasks where heavy back of hand protection, good oil
grip needed
KONG HIGH ABRASION DEXTERITY
IMPACT PROTECTION GLOVE
PVC/PU grip dots in all conditions
Single Layer palm for excellent dexterity
Thumb saddle reinforcement
Highly abrasion resistant palm provides extreme durability.
IVE patent ending optical technology that extend field of visual
recognition.
Proven maximum coverage impact protection on palms,
fingers, thumb, knuckles and metacarpal bones.
Airprene cuff- snug fit, easy to remove, breathable.
Reflective fabric- Nighttime visibility
The INDI-HAD Gloves stands for Industrial Impact High Abrasion
Dexterity. With a high abrasion single layer pal material, these
gloves give the ultimate back of hand protection without
compromising on dexterity and the PVC/PU grip in all conditions.
PALM FEATURES:
GLOVE FEATURES:
Application Tasks were heavy back of hand protection, good grip
as well as dexterity is needed.
Sizes: M, L, XL
Sizes: M, L, XL

KONG RIGGER IMPACT GLOOVE
8X more durable than normal synthetic leather
KONG Metacarpal Protection 80% Impact Absorption
KONG Knuckle Protection 90% Impact Absorption
KONG Patent Pending Finger Protection 76.5% Impact
Absorption offers sidewall and complete fingertip protection.
Extended neoprene cuff
The KONG Rigger Glove is specifically designed for a rigger. The
dual-layer Duraclad reinforcements on the rope channel of the
glove to stand up to long periods of handling rope and cable
while rigging. Co-Developed by the Oil & Gas Industry's Safety
Committee.
FEATURES:
Application Tasks where back hand protection is needed and
while working with the wire ropes.
KONG ORIGINAL IMPACT GLOVE
KONG Metacarpal Protection 80% impact absorption
KONG knuckle Protection 90% impact absorption.
KONG patent Pending Finger Protection 76.4% impact
absorption offers sidewall and complete fingertips protection.
Exclusive Palm Material 25% more abrasion resistant than
normal synthetic leather.
Hi-Viz palm
The bestselling variant in India and Worldwide. The Original oil
and gas industry glove. Co-developed by the Oil and Gas Industry
Safety Committee representing ExxonMobil, ConocoPhillips,
Chevron, Halliburton and many other respected industry leaders.
FEATURES:
Application Tasks where back of hand impact protection is
needed.
Sizes: M, L, XL, XXL
Sizes: S, M, L, XL, XXL, XXXL

KONG DEXTERITY SUPER GRIP
IMPACT PROTECTION
Diamond clad silicone-fused palm for ultimate grip on
wet, oily surfaces
KONG Knuckle protection 90% impact absorption
KONG Metacarpal 80% impact absorption
Saddle & thumb area reinforced with Duraclad- exclusive
abrasion resistant material.
Application Tasks where back of hand protection and grip is
needed.
KONG LOW PROFILE IMPACT
CUT5 GLOVE
Synthetic Suede Palm- Cut Resistant Liner Made with DuPont
Kevlar
Breathable Nylon Back of Hand, thin TPR profile
Patented IVE Full TPR for low light visibility
Thumb Saddle Reinforcement.
Application Tasks where back of hand protection, dexterity and
cut resistance needed.
Sizes: M, L, XL
Sizes: M, L,

IRONCLAD WRENCHWORX ANTI-
VIBRATION IMPACT GLOOVE
Energy absorbing, non-compressible
100% silicone gel palm pads.
The trademark Contour grip jointed 3D-palm geometry ensures
a solid, comfortable grip and maximum dexterity and control
tools.
Dupont Teflon treatment on palm for oil and water resistance.
Velcro fastener for ease of donning
Synthetic back of band and finger side walls in form fitting and
breathable for all day comfort.
Wrench Worx Vibration Impact is a highly dexterous, patent
design glove, engineered to provide maximum protection, in the
critical palm area, from fatigue and the potential damage
associated with the vibration and impact tools.
FEATURES:
Application Anti-vibration Glove for use with impact tools and
wrenches.
Also available in half finger version- MACH 5
KONG DECK CREW CUT5 GLOVE
KONG Metacarpal Protection 80% impact absorption
KONG knuckle Protection 90% impact absorption.
KONG patent Pending Finger Protection 76.4% impact
absorption offers sidewall and complete fingertips protection.
DuPont Teflon Treatment Treated for oil and water resistance.
The KONG Deck Crew Cut 5 is designed for serious abuse. It
features a 4-Layer palm for maximum abrasion resistance. It also
has the exclusive CT5 cut resistant material for cut level 5
protection. It also treated with Dupont Teflon for oil and water
resistance. It also offers complete back of hand protection that
the Oil and Gas industry demands.
FEATURES:
Application Tasks where back of hand impact protection is
needed.
Sizes: S, M, L, XL, XXL, XXXL

Project Sales Corp markets a complete line of safety gloves for
Oil & Gas Industry in India. We introduced the Mechanix Brand
to the Indian market in the year 2012. They are designed and
developed to meet the exact specifications of professionals
working in the O&G Industry.
“Mechanix Wear – The Tool That Fits Like a Glove” Safety Line is
designed to protect the individual in the constantly evolving
work environment and reduce the financial burden of hand
injuries.
Mechanix Wear is the inventor of high-performance glove
category that helps in reducing hand injuries in Oil & Gas
industry with a line of high-tech, hard working gloves. These
are designed through a year of proprietary field research along
with the oil and gas workers in a variety of settings, they
deliver excellent grip, water and oil resistant performance and
structural protection from injuries.
MECHANIX WEAR

MECHANIX ORIGINAL
Form-fitting TrekDry® helps keep your hands cool and
comfortable.
Adjustable Thermoplastic Rubber (TPR) wrist closures create a
secure fit.
The Original® is The Glove that started It All™. Tried, tested and
proven for over 25 years, it delivers the perfect blend of dexterity
and durability. The Original is built with carbon-infused
touchscreen capable synthetic leather and breathable TrekDry®
to create the ultimate tool for hardworking hands. With a gamut
of practical uses, it’s no surprise that The Original is the most
recognized and most frequently worn work glove by anyone
with a toolbox.
FEATURES:
MECHANIX 0.5
Flex inserts improve finger mobility.
High-dexterity 0.5mm AX-Suede™ palm material provides
precision feel
When you need the control of bare hands while still wearing
gloves, reach for the Specialty 0.5mm. Our most dexterous work
glove features a high-dexterity 0.5mm AXSuede™ palm that
forms to your hand for precision work. The Specialty 0.5mm is
anatomically designed to the natural curvatures of the hand
using three-dimensional patterning to improve overall dexterity.
Breathable TrekDry® protects the back of the hand and allows
cool air in when the heat is on.
FEATURES:
MECHANIX IMPACT
Thermoplastic Rubber (TPR) impact protection meets EN
13594 impact standard.
D3O® palm padding absorbs and dissipates high-impact
energy through the palm.
Machine washable.
Make an M-Pact® on the job. The M-Pact protects working hands
with Thermoplastic Rubber (TPR) knuckle protection that
absorbs blunt force impact and meets EN 13594 impact
standard. The M-Pact features D3O® palm padding to dissipate
high-impact energy and reduce hand fatigue as the day goes on.
FEATURES:

MECHANIX M-PACT 2
Durable Armortex® fingertips improve your gripping
power in dry, oily and wet conditions.
Extended Neoprene cuff provides added protection.
From racing to industrial safety, the M-Pact® 2 knows no
bounds when it comes to protecting your hands from
impact, abrasion and hand fatigue. Anatomically designed
for an unbelievable fit, the M-Pact® 2 features an accordion
knuckle with EVA foam padding and Thermoplastic Rubber
(TPR) finger guards to protect against blunt force impact.
Your palm is protected with D3O® technology to reduce
impact and vibration from hand tools.
FEATURES:
MECHANIX FASTFIT CONVERT
Breathable TrekDry® keeps your hands cool and
comfortable.
Stretch-elastic cuffs create a secure fit.
Anatomically designed two-piece palm eliminates
material bunching.
Pinched fingertip construction improves fingertip strength
and durability.
High-dexterity 0.6mm synthetic leather infused with
touchscreen technology.
Nylon carrier loops for storage.
Machine washable.
The next generation of FastFit® tactical gloves are here. Take
control with high-dexterity 0.6mm synthetic leather and
stay connected with full touchscreen technology in the palm
of your hands. The FastFit delivers an unmatched fit with
TrekDry™ evaporative cooling, and rugged carrier loops for
storage in the field.
FEATURES:

Crushing, pinching, cut and puncture hazards make up most of
the serious injuries sustained by workers, so the kind of gloves
needed to protect workers are highly specific.
Superior’s impact resistant gloves feature dense thermo-plastic
pads, strategically placed along the back of the hand to provide
maximum cushioning while not impeding hand functioning.
IMPACT RESISTANT GLOVES
Superior Dexterity Impact Resistant Foam
Nitrile-Dipped Work Gloves
Excellent grip in light oil
100% nylon seamless-knit shell is fast-drying
and moisture-wicking;
TPR on back of hands protects from knocks
and bumps.
Unsurpassed comfort and dexterity
FEATURES:
Part Number #S13BFNVB

Superior Black Widow TenActiv Anti-Impact
Hi-Viz Micropore Nitrile Grip
Made with 13-gauge TenActiv™ for excellent cut protection
Hi-viz knit shell increases worker visibility on the job
TPR backing protects hands from knocks and bumps
PSC introduced the Black Widow glove from Superior
Canada in 2015 for applications that required mechanical
tasks to be performed in the presence of oils and greases.
FEATURES:
Part Number #STAGYPNVB
PSC introduced Dexterity TenActivTM Cut A4 glove from
Superior Canada in 2015 as there was a need for an impact
glove that would enable compliance at a lower cost. A variety
of composite-knit yarns are blended together to create this
glove, including high-strength composite filament fiber for
unbeatable cut resistance and dexterity. TenActiv™ Foam
nitrile palm coating increases grip in wet and oily conditions.
Part Number #STAFGFNVB
Superior TenActiv Anti Impact Cut-
Resistant Black Foam Nitrile Palm Glove
TenActiv™
Made with hi-viz TenActiv™ yarn for excellent cut protection
Hi-viz TPR on back of hand increases visibility and protects
from knocks and bumps
¾ back micropore nitrile coating provides excellent grip by
displacing oil on slippery surfaces
Padding in the palm for comfort and vibration dampening •
Reinforced, extended and double stitched PVC patch to
reduce wear in thumbcrotch and index finger area
ID label personalizes your gloves and reduces loss
Cut-Resistant Anti-Impact Hi-Viz Glove made with Micropore
Grip Nitrile
Features:
Part Number #SHVPNFBVB

Clutch Gear®
Anti-Impact Mechanics Gloves
Specially placed thermoplastic rubber pads on back of
hand protect against knocks without creating stiffness
PVC Sure Grip® palm patches provide excellent grip with
improved fingertip protection
Kevlar® thumb patch prevents wear-through in
highstress area
Adjustable Velcro cuffs for added protection and comfort.
Features:
Part Number #MXVSB
Clutch Gear®
Impact Protection Mechanics Glove Lined with Punkban™
Specially placed thermo-plastic rubber pads at back of
hand protect against knocks without creating stiffness
PVC Sure Grip® palm patches provide excellent grip, and
are cushioned for comfort
Lined with Punkban™
ANSI F2878 4.62 newtons of puncture protection
2050 grams of cut protection
Clutch Gear® impact protection mechanics glove features
dense, thermo-plastic foam rubber patches at the back of
the hand to protect only in the places where impact occurs,
so glove stays fully flexible.
Features
Part Number #MXVSBPB
Clutch Gear®
Hi-Viz Mechanics Gloves with Anti-Impact D3O® Backing
D3O ® elastomer protects vulnerable areas from knocks by
absorbing and displacing energy
45% improvement in impact protection over competitor styles
Good flexibility in cold weather with only an 8% loss in impact
protection in -15° F (-26° C)
PVC Sure Grip® palm and fingertip patches provide excellent
grip with improved abrasion
Kevlar® thumb patch prevents wear-through in high-stress area
Adjustable Velcro® cuffs for added protection and comfort
Features:

Protect your workers' hands when performing tasks that
necessitate the use of cutting tools with Kevlar gloves and cut-
resistant gloves.
These types of work gloves are designed to help protect the
hands against cuts from grinders, utility knives, hatchets and
other sharp-edged tools, as well as sharp edges of glass,
ceramics and cut metal sheets.
Both Kevlar® gloves and cut-resistant gloves are also designed
to allow hand and finger flexibility.
CUT RESISTANT
Lint-free, continuous filament yarn that is stronger than
steel on an equal-weight basis
High-strength composite filament fiber prevents yarn
from poking through the hand or causing itchiness
Non-shedding polyurethane palm coating enhances
grip and provides great tactile sensitivity
The black glove body is designed to hide dirt to save
you money on laundering costs over time
Rated new ANSI cut level A4 for excellent protection
against cut hazards
Features:
Part Number #STAGBPU
TenActiv™
Composite Filament Fiber Cut-Resistant Knit with Black PU Palms

TenActiv™
13-Gauge Salt-And-Pepper High Cut-Resistant Glove With PU Palms
Knit with a blend of steel, HPPE, composite
filament fiber for ANSI level A5 cut protection
Blend incorporates spandex for added comfort
and better fit
TenActiv™ yarn feels cool against the skin and is
more breathable than other fabrics
Polyurethane (PU) palm is non-shedding – ideal for
applications where contamination is a concern
Polyurethane is the best palm coating for high
tactile feel
Features:
Part Number #STAGXPU
Superior®
Extreme Cut Stainless-Steel Chain Mesh Glove
Seamless-knit steel mesh conforms to hand better
than chainmail competitors
Tapered fit design
Ambidextrous design
Elasticized wrist for comfortable, snug fit
Washable using the 3-sink method
Sold per piece
For added comfort a nylon polyester glove liner
(STNP) is included free-of-charge to wear
underneath
FDA and CFIA compliant
6021 GRAMS ANSI of cut protection
Features:
Part Number #SSW

Superior®
Universal Five-Finger Chain Mail Glove
Constructed of welded stainless-steel mesh
Tapered fit design
Ambidextrous – patented system which makes
changing a left-hand glove into a right-hand glove
fast and easy
Washable using 3 sink method
Stainless-steel mesh glove provides excellent cut and
puncture protection for meat and poultry workers and
for other applications where maximum protection is
required. Constructed with individual rings. Color
coded wrist straps for easy size identification. USDA
approved.
Features:
Part Number #GU-500
Superior®
Puncture and Cut-Resistant Sleeve made with Punkban™
Our unique Punkban™ material is highly durable for
superb forearm protection
Protects against cut, abrasion and puncture hazards •
Adjustable Velcro® closure
Features:
Part Number #SLPB9TH

When choosing heat-resistant gloves, one first has to
determine whether the heat is dry or moist; whether the
exposure is thermal or atmospheric; if open flame or
spark is present; and of course, what the temperature is
in any of these conditions.
Terry gloves trap air for good insulation, and are great for
handling rough, sharp metal parts because terry is also
cut resistant. When made with Kevlar® , cut resistance is
increased while also withstanding direct flame. Superior
has wide range of heat resistant gloves to protect your
hands from fire heat.
HEAT RESISTANT GLOVES

Sure Knit™
Flame Resistant Rhovyl® Anti-Static String-Knit Gloves
Flame resistant, Rhovyl® gloves will not drip, melt or
adhere to the skin if exposed to heat or direct flame
Light as nylon and exceptionally non-absorbent, thin,
seamless and soft, they provide great insulation
Rhovyl is hypo-allergenic
Knit shells are made using THT™ (True Hand
Technology) for a great fit and reduced hand fatigue
Resists mildew and other destructive biological
agents
Machine washable and quick drying
Surface-resistance rating between 10 to the 10th
Ohms, to 10 to the 7th Ohms
Features:
Part Number #S13FRT
Dexterity®
Flame-Resistant Arc Flash Glove with Neoprene Palm
13-gauge knit shell increases dexterity and hand
movement
Arc flash testing placed these gloves at level 2, with an
Arc Thermal Performance Value (ATPV) of 9.2 cal/cm2
Flame-resistant neoprene palm coating for better grip
ESD (electrostatic dissipating) carbon filament to
impart anti-static properties.
These gloves are treated with Ultra-Fresh to achieve
99.9% antimicrobial status.
This glove’s scientifically engineered body blends
Kevlar® with a variety of strong and inherently
flameresistant fibers for arc flash and cut.
Features:
Part Number ##S13FRNE

Work Gloves General Purpose Gloves are important work safety
gear in the oil gas industry.
The Inspection Glove range enables supervisors to wear protection
during routine inspection activities.
The Chemical Protection Range protects workers against harsh
chemicals like working with drilling based muds.
INSPECTION CHEMICAL
RESISTANT GLOVES
Chemstop™
Supported 14 PVC Gauntlet
Thick PVC coating over 100% cotton interlock liner
Resists many substances plus great abrasion
resistance and tensile strength
Cotton interlock lining is absorbent for cooler
comfort
14” gauntlet cuff
These PVC gloves are coated over a two piece cotton
interlock liner. PVC has good resistance to aqueous
solutions, detergents, oils, acids and bases. PVC also
has good abrasion resistance.
Features:
Part Number #J236

North Sea™
Orange Oil and Cold Resistant PVC Gloves with Safety Cuff
High-grade PVC formulation for superior flexibility
and crack-resistance in cold temperature
Good chemical and oil resistance • Rough finish on
palm for increased wet/dry grip
CFIA approved for food handling
North Sea Sanitized orange PVC double-dipped
roughened finish on palm, foam laminated insulated
lining, oil and cold resistant, safety cuff.
Features:
Part Number #NS300B
Chemstop®
Supported Neoprene Glove
Heavy-duty neoprene resists a broad range of oils and
chemicals that attack natural rubber gloves.
Excellent protection from acids, caustics, oils, greases,
and many solvents.
The cotton shell absorbs perspiration and cushions
hands.
This liquid, vapor and heat resistant thermal lined
neoprene glove is suitable for many jobs as it protects
against intermittent contact with hot objects up to
392°F (200°C).
The extra-long 18 length gives you added protection.
It also withstands detergents and cleaning solutions
and yet is easily sanitized using a three-sink wash
method.
CFIA Approved for Food Handling.
Features:
Part Number #NE246FFL

Jobs involving repetitive impact and vibration can lead to
carpal tunnel syndrome and other debilitating injuries.
The Superior line of vibration-dampening gloves offered
through PSC are impact resistance and provide metacarpal
protection to help reduce risk of injury.
These gloves are padded with a layer of vibration
dampening polymer. Specially compounded, formed-
chloroprene coated, seamless-lined gloves. Good for
protection from repetitive impact and work with pneumatic
vibrating tools. Ergonomic design offers both comfort and
flexibility.
ANTI-VIBRATION GLOVES

Vibrastop™
Anti-Vibration, Fitters Glove
Padded with a layer of vibration dampening polymer
Sturdy split-leather fitter features a safety cuff for
easier donning and doffing
Double thumb patch, with red cotton-back cuff
Universal size
Features:
Part Number #66BRVIB
Vibrastop™
Goatskin Leather Palm Full-Finger Vibration-Dampening Gloves
Padded with 60 gram layer of vibration dampening
polymer
Good for protection from repetitive impact and work
with pneumatic vibrating tools
Vibration protection in palm
2.5” long adjustable padded wrist strap
Vibrastop™ gloves are padded with vibration-dampening
polymer for protection from the effects of repetitive
impact when using pneumatic vibrating tools. Vibrastop™
goat-grain leather anti-vibration palm, thumb and wrist,
2.5” long adjustable padded wrist strap for excellent wrist
support, stretch-nylon mesh backs.
Features;
Part Number #VIBGV
Also available in half finger style with Part Number
#VIBGHFV

Assembly gloves have three main characteristics: good fit, cut resistance
and good grip. They have to fit well enough to feel fine parts and must not
get in the way of productivity. Cut resistance is critical due to the exposure
to sharp metal edges. Grip is important to prevent hands from slipping
when handling oily metal or glass.
Mechanic's style, work gloves, with ergonomic design, durable grip palm
patches, and some with anti-impact padding or high-visibility backing.
ASSEMBLY MECHANICS GLOVES
Dexterity®
13-gauge Nylon Glove with Micropore Nitrile Palms - Black Widow
Micropore technology provides spider-like grip in
wet/oily conditions
Nitrile coating keeps hands dry; oils and liquids will
not soak through to palm
Black color on palms hides dirt and stains
The Black Widow™ Dexterity Grip S13PNT design
utilizes the latest developments in ‘micropore’
technology by infusing the nitrile coating with millions
of tiny pores. In simple terms, these pores displace oils
and liquids when pressed against smooth surfaces,
and create a kind of suction that further increases grip.
Best of all, the pores do not allow oil to saturate the
nitrile coating as with a foam nitrile glove, keeping
hands dry. Great comfort, dexterity and grip, and
perfect choice for work around CNC machines,
handling oily metal parts and more.
Features:
Part Number #S13PNT

Cold grip handling gloves are used for damp, oily, wet or greasy conditions.
They also give protection against thermal hazards and extreme
temperatures.
Cryogen gloves also come under cold handling gloves for applications
involving extreme temperatures such as handling liquid nitrogen,
autoclaves, freezers and cryogenic atmospheres as well as glove liners and
gloves manufactured from unusual materials offering protection against
more unusual chemicals. These gloves conform to EN 388.
Cryogenic gloves have been developed to give contact protection down to
-125°C against freezer burn and frostbite. When retrieving or placing
products in liquid nitrogen atmospheres, we recommend waterproof
cryogenic gloves as these are less porous to the cold gas.
COLD HANDLING GLOVES
Endura®
Adjustable 36-Inch Leather Welding Apron
Tri-tan grade A side-split cowhide
Adjustable neck strap for comfort
Quick release waist strap for speedy removal
Leather resists spark and flame
Sewn with Kevlar® thread for seam integrity
36-inches long, 24-inches wide
Features:
Part Number #AL3624

Product Support
shivani@projectsalescorp.com
info@projectsalescorp.com
Visit our website:
www.pschandsfree.com
Contact Us
Project Sales Corp
28, Founta Plaza, Suryabagh
Visakhapatnam - 530020
Andhra Pradesh, INDIA.
Shivani - +91- 9603166448
Satish - +91-988 5149 412
Customer Support Rep
Ranga - +91-891 2564 393

PSC TASK SPECIFIC GLOVE GUIDE-BOOK (3).pdf

More Related Content

Similar to PSC TASK SPECIFIC GLOVE GUIDE-BOOK (3).pdf

More from Project Sales Corp

Recently uploaded

PSC TASK SPECIFIC GLOVE GUIDE-BOOK (3).pdf