The document discusses products from the Korea Fire Fighting Corporation including nude fire extinguishers made of polycarbonate. Key points include:
1. The Korea Fire Fighting Corporation produces international patented products using polycarbonate including nude fire extinguishers, butane gas cans, and plastic fuel tanks.
2. Polycarbonate material has properties making it suitable for these products like a temperature range of -60 to 145 degrees Celsius and impact resistance of 650 kgf/cm2.
3. Nude fire extinguishers are made of polycarbonate cylinders containing dry chemical powder or foam under 10 kgf/cm2 of nitrogen gas pressure.
The document discusses products from the Korea Fire Fighting Corporation including nude fire extinguishers made of polycarbonate. Key points:
1. The Korea Fire Fighting Corporation produces international patented products using polycarbonate including nude fire extinguishers, butane gas cans, and fuel tanks.
2. Polycarbonate material has properties that make it suitable for these products like temperature resistance, impact strength, and chemical resistance to butane.
3. Nude fire extinguishers are made of polycarbonate cylinders containing dry chemical powder or foam under pressure for fire suppression.
This document describes a new copolyester material called Eastman Tritan. Tritan offers a unique balance of properties including clarity, toughness, heat resistance, chemical resistance, and ease of processing. It can replace polycarbonate in many applications and offers advantages over other materials. Tritan allows for innovative product designs and differentiated performance.
The document discusses products from the Korea Fire Fighting Corporation including nude fire extinguishers made of polycarbonate. Key points:
1. The Korea Fire Fighting Corporation produces international patented products using polycarbonate including nude fire extinguishers, butane gas cans, and fuel tanks.
2. Polycarbonate material has properties that make it suitable for these products like temperature resistance, impact strength, and chemical resistance to butane.
3. Nude fire extinguishers are made of polycarbonate cylinders containing dry chemical powder or foam under pressure for fire suppression.
This document describes a new copolyester material called Eastman Tritan. Tritan offers a unique balance of properties including clarity, toughness, heat resistance, chemical resistance, and ease of processing. It can replace polycarbonate in many applications and offers advantages over other materials. Tritan allows for innovative product designs and differentiated performance.
This document provides guidelines for product and mold design for plastic parts made through injection molding.
It discusses key considerations for product design such as nominal wall thickness, transitions in wall thickness, corner radii, draft angles, ribs/gussets, bosses, threads, and undercuts. Guidelines are provided for dimensional proportions and design recommendations.
It also covers important aspects of mold design like sprue bushings, runner geometry and size, runner layout including balanced H runners, cold slug wells, and runnerless mold systems including insulated and heated runners. The document emphasizes designing for efficient filling, minimizing cycle times and regrind, and improving part quality.
서류명】특허출원서
【출원구분】특허출원
【출원인】
【성명】김성수
【출원인코드】4-1998-612634-8
【발 명의 국문명칭】투명 누드 폴리카보네이트 압력 내장 용기
【발명의 영문명칭】Transparent polycarbonate pressure container
【발 명자】
【성명】김성수
2009-07-02
【요 약서】
【요약】
[발명이 속한 기술분야] 폴리카보네이트 혼합 수지의 적절한 성분 사용과 인
젝션 및 불로우 사출 성형으로 압력 내장 용기를 제작.
[발명의 목적] 용기의 투명으로 내용물을 용이하게 확인 시키고, 용기의 경
량화로 기존 용기를 대체하며, 일정한 압력이나 온도 이상의 상태에 이르면 용기
자체가 변형 또는 균열이 생겨 내장 압력을 분출 시켜 폭팔을 사전에 방지토록 함.
[발명의 구성] 폴리카보네이트 플라스틱의 혼합물의 적절한 성분을 사용하여
투명 용기를 제작하고, 각종 압력원(질소,부탄, 휘발유, 디젤, 가스계 소화 약제
혹 은 일반 공기)을 사용하는 용기에 사용 목적에 맞는 화학 약제, 연료 또는 내용
물에 본 압력원을 충진 시키고, 이에 각종 밸브, 게이지, 카플링, 노즐 등을 체결
하여 일정한 수준의 방출량을 조절하도록 하면서, 돌발 상황으로 주위의 압력 내지
온 도의 급작스러운 변화에 반응하여 용기 자체가 변형 또는 균열이 나면서 내용물
이 용기가 폭팔하기 전에 사전에 방출 될 수 있도록 조절하여 제작하며 용기의 투
명성을 영원히 유지 하도록 함.
[발명의 효과] 용기의 투명으로 내용물을 별도 게이지 없이도 육안으로 확인
하며, 용기의 외관상 전혀 변화 없이 수십년간 내용물을 사용 목적에 맞게 유지.
【색인어】
투명, 폴리카보네이트, 용기, 압력, 질소, 가스, 부탄, 프로판, 연료, 탱크
9-2
2009-07-02
【명세서】
【발명의 명칭】
투명 누드 폴리카보네이트 압력 내장 용기{Transparent polycarbonate
pressure container}
【발명의 상세한 설명】
【기 술분야】
<1> 폴리카보네이트 혼합 수지의 적절한 성분 사용과 인젝션 및 불로우 사출 성
형으로 압력 내장 용기를 제작.
【배경기술】
<2> 폴리카보네이트 생산업체들의 기술 자료(Technical and Chemical
Characteristics-기술및화학 물성자료), 미국 스포츠 물병 제조업체인 Nalgene사의
500 미리 및 1000미리 물병(인젝션 및 불로우 사출 성형된 세계 최초의 압력 용기)
및 대륙제관에서 만든 폭팔 방지 부탄가스통(CRV 기술 적용된), 진영 논공단지에
있는 "대우화학에서 제작하여 생산 중단된 7.5리터 퓨리스 생수 물통, 전북 무안에
있었던 부경 플라스틱이 제작하였던 단순 불로우로 제작된 바 있던 4.5리터 연수기
물통.
【발명의 내용】
【해결하고자 하는 과제】
<3> 내용물을 쉽게 확인하도록 투명하게 제작하고, 기존 제품 보다 경량화시켜서
9-3
2009-07-02
이동 및 설치를 용이하게 하며, 연료를 절감시키면서, 폭팔 방지 기능을 도입하여
돌발 상황에 적절하게 대응하도록 함.
【과제 해결 수단】
<4> 폴리카보네이트 플라스틱의 혼합물의 적절한 성분을 사용하여 투명 용기를
제작하고, 각종 압력원(질소,부탄, 휘발유, 디젤, 가스계 소화 약제 혹은 일반 공
기)을 사용하는 용기에 사용 목적에 맞는 화학 약제, 연료 또는 내용물에 본 압력
원을 충진 시키고, 이에 각종 밸브, 게이지, 카플링, 노즐 등을 체결하여 일정한
수준의 방출량을 조절하도록 하면서, 돌발 상황으로 주위의 압력 내지 온도의 급작
스러운 변화에 반응하여 용기
This document provides guidelines for product and mold design for plastic parts made through injection molding.
It discusses key considerations for product design such as nominal wall thickness, transitions in wall thickness, corner radii, draft angles, ribs/gussets, bosses, threads, and undercuts. Guidelines are provided for dimensional proportions and design recommendations.
It also covers important aspects of mold design like sprue bushings, runner geometry and size, runner layout including balanced H runners, cold slug wells, and runnerless mold systems including insulated runners and hot runner systems. The document emphasizes designing for efficient filling, minimizing cycle times and regrind, and improving part quality.
This document provides guidelines for product and mold design for plastic parts made through injection molding.
It discusses key considerations for product design such as nominal wall thickness, transitions in wall thickness, corner radii, draft angles, ribs/gussets, bosses, threads, and undercuts. Guidelines are provided for dimensional proportions and design recommendations.
It also covers important aspects of mold design like sprue bushings, runner geometry and size, runner layout including balanced H runners, cold slug wells, and runnerless mold systems including insulated runners and hot runner systems. The document emphasizes designing for efficient filling, minimizing cycle times and regrind, and improving part quality.
The document contains a list of names, emails, and in some cases companies associated with them. There are over 30 entries in the list with first names or aliases that contain terms like "Fire", "Sex", "Sucx", "Nude", and "Zephyr" paired with the last name "Archangel". Many of the emails are from free webmail providers and contain similar naming patterns matching the first and last names.
This document provides guidelines for product and mold design for plastic parts made through injection molding.
It discusses key considerations for product design such as nominal wall thickness, transitions in wall thickness, corner radii, draft angles, ribs/gussets, bosses, threads, and undercuts. Guidelines are provided for dimensional proportions and design recommendations.
It also covers important aspects of mold design like sprue bushings, runner geometry and size, runner layout including balanced H runners, cold slug wells, and runnerless mold systems including insulated and heated runners. The document emphasizes designing for efficient filling, minimizing cycle times and regrind, and improving part quality.
서류명】특허출원서
【출원구분】특허출원
【출원인】
【성명】김성수
【출원인코드】4-1998-612634-8
【발 명의 국문명칭】투명 누드 폴리카보네이트 압력 내장 용기
【발명의 영문명칭】Transparent polycarbonate pressure container
【발 명자】
【성명】김성수
2009-07-02
【요 약서】
【요약】
[발명이 속한 기술분야] 폴리카보네이트 혼합 수지의 적절한 성분 사용과 인
젝션 및 불로우 사출 성형으로 압력 내장 용기를 제작.
[발명의 목적] 용기의 투명으로 내용물을 용이하게 확인 시키고, 용기의 경
량화로 기존 용기를 대체하며, 일정한 압력이나 온도 이상의 상태에 이르면 용기
자체가 변형 또는 균열이 생겨 내장 압력을 분출 시켜 폭팔을 사전에 방지토록 함.
[발명의 구성] 폴리카보네이트 플라스틱의 혼합물의 적절한 성분을 사용하여
투명 용기를 제작하고, 각종 압력원(질소,부탄, 휘발유, 디젤, 가스계 소화 약제
혹 은 일반 공기)을 사용하는 용기에 사용 목적에 맞는 화학 약제, 연료 또는 내용
물에 본 압력원을 충진 시키고, 이에 각종 밸브, 게이지, 카플링, 노즐 등을 체결
하여 일정한 수준의 방출량을 조절하도록 하면서, 돌발 상황으로 주위의 압력 내지
온 도의 급작스러운 변화에 반응하여 용기 자체가 변형 또는 균열이 나면서 내용물
이 용기가 폭팔하기 전에 사전에 방출 될 수 있도록 조절하여 제작하며 용기의 투
명성을 영원히 유지 하도록 함.
[발명의 효과] 용기의 투명으로 내용물을 별도 게이지 없이도 육안으로 확인
하며, 용기의 외관상 전혀 변화 없이 수십년간 내용물을 사용 목적에 맞게 유지.
【색인어】
투명, 폴리카보네이트, 용기, 압력, 질소, 가스, 부탄, 프로판, 연료, 탱크
9-2
2009-07-02
【명세서】
【발명의 명칭】
투명 누드 폴리카보네이트 압력 내장 용기{Transparent polycarbonate
pressure container}
【발명의 상세한 설명】
【기 술분야】
<1> 폴리카보네이트 혼합 수지의 적절한 성분 사용과 인젝션 및 불로우 사출 성
형으로 압력 내장 용기를 제작.
【배경기술】
<2> 폴리카보네이트 생산업체들의 기술 자료(Technical and Chemical
Characteristics-기술및화학 물성자료), 미국 스포츠 물병 제조업체인 Nalgene사의
500 미리 및 1000미리 물병(인젝션 및 불로우 사출 성형된 세계 최초의 압력 용기)
및 대륙제관에서 만든 폭팔 방지 부탄가스통(CRV 기술 적용된), 진영 논공단지에
있는 "대우화학에서 제작하여 생산 중단된 7.5리터 퓨리스 생수 물통, 전북 무안에
있었던 부경 플라스틱이 제작하였던 단순 불로우로 제작된 바 있던 4.5리터 연수기
물통.
【발명의 내용】
【해결하고자 하는 과제】
<3> 내용물을 쉽게 확인하도록 투명하게 제작하고, 기존 제품 보다 경량화시켜서
9-3
2009-07-02
이동 및 설치를 용이하게 하며, 연료를 절감시키면서, 폭팔 방지 기능을 도입하여
돌발 상황에 적절하게 대응하도록 함.
【과제 해결 수단】
<4> 폴리카보네이트 플라스틱의 혼합물의 적절한 성분을 사용하여 투명 용기를
제작하고, 각종 압력원(질소,부탄, 휘발유, 디젤, 가스계 소화 약제 혹은 일반 공
기)을 사용하는 용기에 사용 목적에 맞는 화학 약제, 연료 또는 내용물에 본 압력
원을 충진 시키고, 이에 각종 밸브, 게이지, 카플링, 노즐 등을 체결하여 일정한
수준의 방출량을 조절하도록 하면서, 돌발 상황으로 주위의 압력 내지 온도의 급작
스러운 변화에 반응하여 용기
This document provides guidelines for product and mold design for plastic parts made through injection molding.
It discusses key considerations for product design such as nominal wall thickness, transitions in wall thickness, corner radii, draft angles, ribs/gussets, bosses, threads, and undercuts. Guidelines are provided for dimensional proportions and design recommendations.
It also covers important aspects of mold design like sprue bushings, runner geometry and size, runner layout including balanced H runners, cold slug wells, and runnerless mold systems including insulated runners and hot runner systems. The document emphasizes designing for efficient filling, minimizing cycle times and regrind, and improving part quality.
This document provides guidelines for product and mold design for plastic parts made through injection molding.
It discusses key considerations for product design such as nominal wall thickness, transitions in wall thickness, corner radii, draft angles, ribs/gussets, bosses, threads, and undercuts. Guidelines are provided for dimensional proportions and design recommendations.
It also covers important aspects of mold design like sprue bushings, runner geometry and size, runner layout including balanced H runners, cold slug wells, and runnerless mold systems including insulated runners and hot runner systems. The document emphasizes designing for efficient filling, minimizing cycle times and regrind, and improving part quality.
The document contains a list of names, emails, and in some cases companies associated with them. There are over 30 entries in the list with first names or aliases that contain terms like "Fire", "Sex", "Sucx", "Nude", and "Zephyr" paired with the last name "Archangel". Many of the emails are from free webmail providers and contain similar naming patterns matching the first and last names.
10. 국제 특허 제품 (Polycarbonate)
1. Nude Fire Extinguisher
2. 재 충전용 부탄 가스 통
3. LPG Cylinder(소형 및 대형)
4. Plastic Valves
5. 플라스틱 Sprinklers
6. Nude Butane Gas Cans
7. LED Bulb with 消火器
8. Polycarbonate 휘발유/디젤 연료 탱크
9. 기타 압력 내장 용기 약 10가지등등
11. Polycarbonate 기술 특성
- 내열 온도 -60 ~ + 145도
- 인장 강도 65 Mpa
- 충격 강도 650 kgf/cm2
- 가격 : 4,000원/kg(알갱이)
- 특징 : 투명/Nude
- 화학적 특성 : 부탄 등에 優秀
- 자외선 차단
- 대표 제품 : 일반 생수 물통15L
12. Nude Fire Extinguisher, 누드 소화기
제품에 대한 영문 설명(조선 댄장에게는 안판다)
Polycarbonate Cylinder(Bottle Shape) contains the abc Dry
Chemical Powder(Nh4h2Po4 with Silicone Oil coated) or
West Chemicals, Foam (AFFF or other Liquids), containing
the Pressure inside about10 Kgf/cm2 Nitrogen(N2) gas.
1. Sizes : Normally, 3.0Kgs(3.75L), 2.0Kgs, 1.0kgs, 4.0Kgs, 20Kgs
2. Fire Suppression Chemical Materials : abc Dry Powder or Wet
3. Valves : Engineering Plastic(Not Metals)
4. Colors : Normally, Hot Pink, Transparent, Nude, Visible inside
5. Shapes : Normally, Plain Cylinder type, but Venus type optional
6. Gross Weights : Plus 1.3 times on the each Sizes
7. Patent Pending for this Plastic, Polycarbonate Cylinder & Valve
8. Remarks : No Pressure gauges or No Nose Hoses upto 4.0Kgs without
Carton Box,
9. Packing : Clear Wrap Packing without any Carton Box with MultiHolder
Grip
13. 1605 Bookmarks for 대한 소방 공사 Front Pagedel.icios,dell,shadow
copy,upload,photos,picture,digital,nude,fire,fighting,corporation,Kore
south,nuclear,atlanta,Japan,China,volcano,earthquake,typoon,hurric
mould,plastic,poly,carbonate Nude Fire Extinguisher Group in
Vox??,???????,??,??,???,??,??,??,????,pc,polymer,diigo,mister,wo
shutterfly,naked,
faves,?,??,??,???,??,??,??,???,??,???,??????,???,??,??,???,
shuttle,??,EntertainmentBookMarks 1,402 of SimPy "Shinbiro" ID???
bookmarks,??,??,???????,??,???,??,polycarbonatePolycarbonate
Cylinder**(PC) Polycarbonate Cylinder*TM* for Pressure-Containers
be used fonude,fire,extinguisher,polycarbonate,
plastic,??,???,??,??,???????,????,??,??,??My NetvouzBookmarks
Imported_From_IE,??Omnexus.comBookmarks,IE??_???_???_(1)
Simpy Browser IntegrationBookmarks,Bookmark_BarMy
DeliciousBookmarks,IE??_???_???_(1)Ugly Korean Fire Organizatio
Zephyr Archangel is Gate-Jockey in Heaven - FotologBookmarks,
Imported_From_IE,Photos,FotoLog» Add to Technorati
FavoritesBookmarks,Bookmark_Barzephyrakim - Zorpia - Share Pho
Make FriendsBookmarks,IE??_???_???_(1),ZorpiaBookmark on