This document is a service manual for tractor models TD5.65, TD5.75, TD5.85, TD5.95, TD5.105, and TD5.115. It contains sections on the engine, clutch, transmission, four-wheel drive system, front and rear axle systems, power take-off, brakes and controls, hydraulic systems, steering, wheels, cab climate control, electrical systems, and platform, cab, bodywork, and decals. The manual provides maintenance and repair instructions and notes the importance of using only genuine spare parts.
New holland td5.105 tractor service repair manualujdfjjjdfkkskemm
This document is a service manual for tractor models TD5.65, TD5.75, TD5.85, TD5.95, TD5.105, and TD5.115. It contains an introduction and safety rules section, followed by detailed sections on the engine, clutch, transmission, four-wheel drive system, front and rear axle systems, power take-off, brakes and controls, hydraulic systems, steering, wheels, cab climate control, electrical systems, and platform, cab, bodywork, and decals. The manual provides maintenance and repair instructions for authorized workshops and notes the importance of using only genuine spare parts.
New holland td5.115 tractor service repair manualujdjjkkskmme
This document is a service manual that provides instructions and component information for TD5.85, TD5.95, TD5.105, and TD5.115 tractor models. It covers various systems of the tractors including the engine, transmission, brakes, hydraulics, steering, wheels, cab climate control, and electrical systems. The introduction section provides general notes to owners on carrying out maintenance and repairs, instructions for installing rotating seals and O-rings, and safety guidelines.
New Holland TD5.115 Tractor Service Repair Manual 1.pdffusedkdm9id
This service manual section provides specifications and exploded views of engine components for various tractor models. Technical data includes engine torque values and required special tools. The manual covers general engine overview and components such as the crankcase, valve drive, and fuel injection systems.
New Holland TD5.95 Tractor Service Repair Manual 1.pdffusedkdm9id
This service manual section provides specifications and exploded views of engine components for various TD5 tractor models. Technical data includes engine torque values and required special tools. The overview diagram shows the main components of the TD5.95, TD5.105 and TD5.115 engines, including the cylinder block, crankshaft and other internal parts. Exploded views provide further details on engine assembly.
New Holland TD5.105 Tractor Service Repair Manual 1.pdffusedkdm9id
This service manual section provides specifications and exploded views of engine components for various tractor models. Technical data includes engine torque values and required special tools. The manual covers general engine overviews and components such as the crankcase, valve drive, crankshaft, fuel injection system, cooling system, and fan drive.
New Holland TD5.85 Tractor Service Repair Manual 1.pdffusedkdm9id
This service manual section provides specifications and exploded views of engine components for various tractor models. Technical data includes engine torque values and required special tools. The manual covers general engine overviews and components such as the crankcase, valve drive, and fuel injection systems.
New Holland TD5.75 Tractor Service Repair Manual.pdffusedkdm9id
This service manual section provides specifications and exploded views of engine components for various tractor models. Technical data includes engine torque values and required special tools. The manual covers general engine overviews and components such as the crankcase, valve drive, crankshaft, and fuel injection system.
New Holland TD5.65 Tractor Service Repair Manual.pdffusedkdm9id
This service manual section provides specifications and exploded views of engine components for various tractor models. Technical data includes engine torque values and required special tools. The manual covers general engine overviews and components such as the crankcase, valve drive, crankshaft, and fuel injection system.
New holland td5.105 tractor service repair manualujdfjjjdfkkskemm
This document is a service manual for tractor models TD5.65, TD5.75, TD5.85, TD5.95, TD5.105, and TD5.115. It contains an introduction and safety rules section, followed by detailed sections on the engine, clutch, transmission, four-wheel drive system, front and rear axle systems, power take-off, brakes and controls, hydraulic systems, steering, wheels, cab climate control, electrical systems, and platform, cab, bodywork, and decals. The manual provides maintenance and repair instructions for authorized workshops and notes the importance of using only genuine spare parts.
New holland td5.115 tractor service repair manualujdjjkkskmme
This document is a service manual that provides instructions and component information for TD5.85, TD5.95, TD5.105, and TD5.115 tractor models. It covers various systems of the tractors including the engine, transmission, brakes, hydraulics, steering, wheels, cab climate control, and electrical systems. The introduction section provides general notes to owners on carrying out maintenance and repairs, instructions for installing rotating seals and O-rings, and safety guidelines.
New Holland TD5.115 Tractor Service Repair Manual 1.pdffusedkdm9id
This service manual section provides specifications and exploded views of engine components for various tractor models. Technical data includes engine torque values and required special tools. The manual covers general engine overview and components such as the crankcase, valve drive, and fuel injection systems.
New Holland TD5.95 Tractor Service Repair Manual 1.pdffusedkdm9id
This service manual section provides specifications and exploded views of engine components for various TD5 tractor models. Technical data includes engine torque values and required special tools. The overview diagram shows the main components of the TD5.95, TD5.105 and TD5.115 engines, including the cylinder block, crankshaft and other internal parts. Exploded views provide further details on engine assembly.
New Holland TD5.105 Tractor Service Repair Manual 1.pdffusedkdm9id
This service manual section provides specifications and exploded views of engine components for various tractor models. Technical data includes engine torque values and required special tools. The manual covers general engine overviews and components such as the crankcase, valve drive, crankshaft, fuel injection system, cooling system, and fan drive.
New Holland TD5.85 Tractor Service Repair Manual 1.pdffusedkdm9id
This service manual section provides specifications and exploded views of engine components for various tractor models. Technical data includes engine torque values and required special tools. The manual covers general engine overviews and components such as the crankcase, valve drive, and fuel injection systems.
New Holland TD5.75 Tractor Service Repair Manual.pdffusedkdm9id
This service manual section provides specifications and exploded views of engine components for various tractor models. Technical data includes engine torque values and required special tools. The manual covers general engine overviews and components such as the crankcase, valve drive, crankshaft, and fuel injection system.
New Holland TD5.65 Tractor Service Repair Manual.pdffusedkdm9id
This service manual section provides specifications and exploded views of engine components for various tractor models. Technical data includes engine torque values and required special tools. The manual covers general engine overviews and components such as the crankcase, valve drive, crankshaft, and fuel injection system.
New holland td5.75 tractor service repair manualujdjfjkskmdm
This document is a service manual for tractor models TD5.65, TD5.75, TD5.85, TD5.95, TD5.105, and TD5.115. It contains an introduction and safety rules section, as well as sections covering the engine, clutch, transmission, four-wheel drive system, front and rear axle systems, power take-off, brakes and controls, hydraulic systems, steering, wheels, cab climate control, electrical systems, and platform, cab, bodywork, and decals. The manual provides maintenance and repair instructions for authorized workshops and technicians.
New holland td5.85 tractor service repair manualuufdjjjskkemm
This document is a service manual for tractor models TD5.65, TD5.75, TD5.85, TD5.95, TD5.105, and TD5.115. It contains an introduction, safety rules, consumables information, and sections covering the engine, clutch, transmission, four-wheel drive system, front and rear axle systems, power take-off, brakes and controls, hydraulic systems, steering, wheels, cab climate control, electrical systems, and platform, cab, bodywork, and decals. The manual provides maintenance and repair instructions and should only be used by authorized New Holland workshops.
New holland td5.75 tractor service repair manualujfdjjkskkdme
This document is a service manual for tractor models TD5.65, TD5.75, TD5.85, TD5.95, TD5.105, and TD5.115. It contains an introduction and safety rules section, as well as sections covering the engine, clutch, transmission, four-wheel drive system, front and rear axle systems, power take-off, brakes and controls, hydraulic systems, steering, wheels, cab climate control, electrical systems, and platform, cab, bodywork, and decals. The manual provides maintenance and repair instructions for authorized workshops and technicians.
New holland td5.65 tractor service repair manualudjjsjkkddkmme
This service manual provides information on servicing the engine for TD5.65, TD5.75, TD5.85, TD5.95, TD5.105 and TD5.115 tractors. It includes technical specifications, torque specifications, lists of required special tools, and exploded views of engine components. The manual covers the engine and crankcase, valve drive and gears, crankshaft and flywheel, fuel injection system, engine cooling system, and fan and drive.
New holland td5.115 tractor service repair manualujdfjjjdfkkskemm
This document is a service manual for tractor models TD5.65, TD5.75, TD5.85, TD5.95, TD5.105, and TD5.115. It contains an introduction and safety rules section, as well as sections covering the engine, clutch, transmission, four-wheel drive system, front and rear axle systems, power take-off, brakes and controls, hydraulic systems, steering, wheels, cab climate control, electrical systems, and the platform, cab, bodywork, and decals. The manual provides maintenance and repair instructions for authorized workshops and technicians working on these tractor models.
New holland td5.95 tractor service repair manualfujsjefwekskemm
This service manual provides information on servicing the engine for TD5.65 - TD5.115 tractors. It includes technical specifications, torque specifications, and exploded views of the engine and its components. Special tools are also listed for working on different engine models. The manual covers general engine overhaul and repair.
New holland td5.95 tractor service repair manualuujfjjskkdme
This document is a service manual for tractor models TD5.65, TD5.75, TD5.85, TD5.95, TD5.105, and TD5.115. It contains an introduction and safety rules section, followed by detailed sections on the engine, clutch, transmission, four-wheel drive system, front and rear axle systems, power take-off, brakes and controls, hydraulic systems, steering, wheels, cab climate control, electrical systems, and platform, cab, bodywork, and decals. The manual provides maintenance and repair instructions for authorized workshops and technicians.
New holland td5.75 tractor service repair manualfusjefjskefkksem
This document is a service manual for tractor models TD5.65, TD5.75, TD5.85, TD5.95, TD5.105, and TD5.115. It contains an introduction and safety rules section, as well as sections covering the engine, clutch, transmission, four-wheel drive system, front and rear axle systems, power take-off, brakes and controls, hydraulic systems, steering, wheels, cab climate control, electrical systems, and the platform, cab, bodywork, and decals. The manual provides maintenance and repair instructions for authorized workshops and technicians working on these tractor models.
New holland td5.85 tractor service repair manualujfjjkskkmdme
This document is a service manual for tractor models TD5.65, TD5.75, TD5.85, TD5.95, TD5.105, and TD5.115. It contains sections on the engine, clutch, transmission, four-wheel drive system, front and rear axle systems, power take-off, brakes and controls, hydraulic systems, steering, wheels, cab climate control, electrical systems, and platform, cab, bodywork, and decals. The manual provides instructions for maintenance and repair work to be performed exclusively by authorized New Holland workshops.
New holland td5.85 tractor service repair manualfujsjefkskem
This document is a service manual for tractor models TD5.65, TD5.75, TD5.85, TD5.95, TD5.105, and TD5.115. It contains an introduction and safety rules section, as well as sections covering the engine, clutch, transmission, four-wheel drive system, front and rear axle systems, power take-off, brakes and controls, hydraulic systems, steering, wheels, cab climate control, electrical systems, and platform, cab, bodywork, and decals. The manual provides maintenance and repair instructions for authorized workshops and technicians.
New holland td5.105 tractor service repair manualfusefjsekkemm
This service manual provides information on servicing engines for TD5.65, TD5.75, TD5.85, TD5.95, TD5.105 and TD5.115 tractors. It covers the engine and crankcase, valve drive and gears, crankshaft and flywheel, fuel injection system, engine cooling system, and fan and drive. Technical data, torque specifications, and required special tools are included for each engine model.
New holland td5.65 tractor service repair manualfijsfjskekmme
This document is a service manual for tractor models TD5.65, TD5.75, TD5.85, TD5.95, TD5.105, and TD5.115. It contains an introduction and safety rules section, followed by detailed sections on the engine, clutch, transmission, four-wheel drive system, front and rear axle systems, power take-off, brakes and controls, hydraulic systems, steering, wheels, cab climate control, electrical systems, and platform, cab, bodywork, and decals. The manual provides maintenance and repair instructions for authorized workshops and technicians.
New holland td5.115 tractor service repair manualfusjjfkskemem
This service manual provides information on servicing the engine for TD5.65 - TD5.115 tractors. It includes technical specifications, torque specifications, and exploded views of the engine and its components. Special tools are also listed for working on different engine models. The manual covers general engine overhaul and repair.
New holland td5.75 tractor service repair manualfujsjfskekmm
This service manual provides information on servicing the engine for TD5.65, TD5.75, TD5.85, TD5.95, TD5.105 and TD5.115 tractors. It includes technical specifications, torque specifications, lists of required special tools, and exploded views of engine components. The manual is intended to be used by authorized service technicians when performing maintenance and repairs.
New holland td5.85 tractor service repair manualfikskefjsekfsem
This service manual provides information on servicing engines for TD5.65, TD5.75, TD5.85, TD5.95, TD5.105 and TD5.115 tractors. It covers the engine and crankcase, valve drive and gears, crankshaft and flywheel, fuel injection system, engine cooling system, and fan and drive. Technical data, torque specifications, and required special tools are included for each engine model.
New holland td5.105 tractor service repair manualfusjjfkskemem
This document is a service manual for tractor models TD5.65, TD5.75, TD5.85, TD5.95, TD5.105, and TD5.115. It contains an introduction and safety rules section, followed by detailed sections on the engine, clutch, transmission, four-wheel drive system, front and rear axle systems, power take-off, brakes and controls, hydraulic systems, steering, wheels, cab climate control, electrical systems, and platform, cab, bodywork, and decals. The manual provides maintenance and repair instructions for authorized workshops and notes the importance of using only genuine spare parts.
New holland td5.115 tractor service repair manualfusefjsekkemm
This service manual provides information on servicing engines for TD5.65, TD5.75, TD5.85, TD5.95, TD5.105 and TD5.115 tractors. It covers the engine and crankcase, valve drive and gears, crankshaft and flywheel, fuel injection system, engine cooling system, and fan and drive. Technical data, torque specifications, and required special tools are included for each engine model.
New Holland TD5.105 Tractor Service Repair Manual.pdffusedkdm9id
The document provides service information for exhaust gas recirculation systems on various tractor models. It includes technical specifications, descriptions of component operation, instructions for removing and installing diesel particulate filters, and diagnostic procedures for exhaust gas recirculation and particulate filter faults.
New Holland TD5.115 Tractor Service Repair Manual.pdffusedkdm9id
The document provides service information for exhaust gas recirculation systems on various tractor models. It includes technical specifications, descriptions of component operation, instructions for removing and installing diesel particulate filters, and diagnostic procedures for exhaust gas recirculation and particulate filter faults.
New Holland TD5.95 Tractor Service Repair Manual.pdffusedkdm9id
The document provides service information for exhaust gas recirculation systems on various tractor models. It includes technical specifications, descriptions of component operation, instructions for removing and installing diesel particulate filters, and diagnostic procedures for exhaust gas recirculation and particulate filter faults.
Caterpillar cat 330 l excavator (prefix 8fk) service repair manual (8fk00001 ...fjsjekdmmeme
This document provides instructions for removing and installing a cylinder head on a 330L excavator with a 3306 engine. The key steps are:
1. Remove components attached to the cylinder head like the exhaust manifold, fuel lines, and rocker shaft.
2. Remove the cylinder head bolts and lifting the heavy cylinder head off the engine.
3. Clean the mating surfaces and install a new gasket before reinstalling the cylinder head and torquing the bolts in the specified sequence.
4. Reinstall the removed components like the rocker shaft after installing the new cylinder head.
Caterpillar cat 330 l excavator (prefix 5ym) service repair manual (5ym00001 ...fjsjekdmmeme
The document provides instructions for installing a cylinder head on a Caterpillar 330 excavator engine. It describes:
1. Removing the fuel injection lines, exhaust manifold, and rocker shaft/pushrods before removing the cylinder head.
2. Removing the water pump elbow, inlet manifold, and air inlet pipe to access the cylinder head bolts.
3. Using a lifting device to safely remove the 95 kg cylinder head from the engine block.
4. Cleaning all parts to prevent contamination before reinstallation.
More Related Content
Similar to New holland td5.85 tractor service repair manual
New holland td5.75 tractor service repair manualujdjfjkskmdm
This document is a service manual for tractor models TD5.65, TD5.75, TD5.85, TD5.95, TD5.105, and TD5.115. It contains an introduction and safety rules section, as well as sections covering the engine, clutch, transmission, four-wheel drive system, front and rear axle systems, power take-off, brakes and controls, hydraulic systems, steering, wheels, cab climate control, electrical systems, and platform, cab, bodywork, and decals. The manual provides maintenance and repair instructions for authorized workshops and technicians.
New holland td5.85 tractor service repair manualuufdjjjskkemm
This document is a service manual for tractor models TD5.65, TD5.75, TD5.85, TD5.95, TD5.105, and TD5.115. It contains an introduction, safety rules, consumables information, and sections covering the engine, clutch, transmission, four-wheel drive system, front and rear axle systems, power take-off, brakes and controls, hydraulic systems, steering, wheels, cab climate control, electrical systems, and platform, cab, bodywork, and decals. The manual provides maintenance and repair instructions and should only be used by authorized New Holland workshops.
New holland td5.75 tractor service repair manualujfdjjkskkdme
This document is a service manual for tractor models TD5.65, TD5.75, TD5.85, TD5.95, TD5.105, and TD5.115. It contains an introduction and safety rules section, as well as sections covering the engine, clutch, transmission, four-wheel drive system, front and rear axle systems, power take-off, brakes and controls, hydraulic systems, steering, wheels, cab climate control, electrical systems, and platform, cab, bodywork, and decals. The manual provides maintenance and repair instructions for authorized workshops and technicians.
New holland td5.65 tractor service repair manualudjjsjkkddkmme
This service manual provides information on servicing the engine for TD5.65, TD5.75, TD5.85, TD5.95, TD5.105 and TD5.115 tractors. It includes technical specifications, torque specifications, lists of required special tools, and exploded views of engine components. The manual covers the engine and crankcase, valve drive and gears, crankshaft and flywheel, fuel injection system, engine cooling system, and fan and drive.
New holland td5.115 tractor service repair manualujdfjjjdfkkskemm
This document is a service manual for tractor models TD5.65, TD5.75, TD5.85, TD5.95, TD5.105, and TD5.115. It contains an introduction and safety rules section, as well as sections covering the engine, clutch, transmission, four-wheel drive system, front and rear axle systems, power take-off, brakes and controls, hydraulic systems, steering, wheels, cab climate control, electrical systems, and the platform, cab, bodywork, and decals. The manual provides maintenance and repair instructions for authorized workshops and technicians working on these tractor models.
New holland td5.95 tractor service repair manualfujsjefwekskemm
This service manual provides information on servicing the engine for TD5.65 - TD5.115 tractors. It includes technical specifications, torque specifications, and exploded views of the engine and its components. Special tools are also listed for working on different engine models. The manual covers general engine overhaul and repair.
New holland td5.95 tractor service repair manualuujfjjskkdme
This document is a service manual for tractor models TD5.65, TD5.75, TD5.85, TD5.95, TD5.105, and TD5.115. It contains an introduction and safety rules section, followed by detailed sections on the engine, clutch, transmission, four-wheel drive system, front and rear axle systems, power take-off, brakes and controls, hydraulic systems, steering, wheels, cab climate control, electrical systems, and platform, cab, bodywork, and decals. The manual provides maintenance and repair instructions for authorized workshops and technicians.
New holland td5.75 tractor service repair manualfusjefjskefkksem
This document is a service manual for tractor models TD5.65, TD5.75, TD5.85, TD5.95, TD5.105, and TD5.115. It contains an introduction and safety rules section, as well as sections covering the engine, clutch, transmission, four-wheel drive system, front and rear axle systems, power take-off, brakes and controls, hydraulic systems, steering, wheels, cab climate control, electrical systems, and the platform, cab, bodywork, and decals. The manual provides maintenance and repair instructions for authorized workshops and technicians working on these tractor models.
New holland td5.85 tractor service repair manualujfjjkskkmdme
This document is a service manual for tractor models TD5.65, TD5.75, TD5.85, TD5.95, TD5.105, and TD5.115. It contains sections on the engine, clutch, transmission, four-wheel drive system, front and rear axle systems, power take-off, brakes and controls, hydraulic systems, steering, wheels, cab climate control, electrical systems, and platform, cab, bodywork, and decals. The manual provides instructions for maintenance and repair work to be performed exclusively by authorized New Holland workshops.
New holland td5.85 tractor service repair manualfujsjefkskem
This document is a service manual for tractor models TD5.65, TD5.75, TD5.85, TD5.95, TD5.105, and TD5.115. It contains an introduction and safety rules section, as well as sections covering the engine, clutch, transmission, four-wheel drive system, front and rear axle systems, power take-off, brakes and controls, hydraulic systems, steering, wheels, cab climate control, electrical systems, and platform, cab, bodywork, and decals. The manual provides maintenance and repair instructions for authorized workshops and technicians.
New holland td5.105 tractor service repair manualfusefjsekkemm
This service manual provides information on servicing engines for TD5.65, TD5.75, TD5.85, TD5.95, TD5.105 and TD5.115 tractors. It covers the engine and crankcase, valve drive and gears, crankshaft and flywheel, fuel injection system, engine cooling system, and fan and drive. Technical data, torque specifications, and required special tools are included for each engine model.
New holland td5.65 tractor service repair manualfijsfjskekmme
This document is a service manual for tractor models TD5.65, TD5.75, TD5.85, TD5.95, TD5.105, and TD5.115. It contains an introduction and safety rules section, followed by detailed sections on the engine, clutch, transmission, four-wheel drive system, front and rear axle systems, power take-off, brakes and controls, hydraulic systems, steering, wheels, cab climate control, electrical systems, and platform, cab, bodywork, and decals. The manual provides maintenance and repair instructions for authorized workshops and technicians.
New holland td5.115 tractor service repair manualfusjjfkskemem
This service manual provides information on servicing the engine for TD5.65 - TD5.115 tractors. It includes technical specifications, torque specifications, and exploded views of the engine and its components. Special tools are also listed for working on different engine models. The manual covers general engine overhaul and repair.
New holland td5.75 tractor service repair manualfujsjfskekmm
This service manual provides information on servicing the engine for TD5.65, TD5.75, TD5.85, TD5.95, TD5.105 and TD5.115 tractors. It includes technical specifications, torque specifications, lists of required special tools, and exploded views of engine components. The manual is intended to be used by authorized service technicians when performing maintenance and repairs.
New holland td5.85 tractor service repair manualfikskefjsekfsem
This service manual provides information on servicing engines for TD5.65, TD5.75, TD5.85, TD5.95, TD5.105 and TD5.115 tractors. It covers the engine and crankcase, valve drive and gears, crankshaft and flywheel, fuel injection system, engine cooling system, and fan and drive. Technical data, torque specifications, and required special tools are included for each engine model.
New holland td5.105 tractor service repair manualfusjjfkskemem
This document is a service manual for tractor models TD5.65, TD5.75, TD5.85, TD5.95, TD5.105, and TD5.115. It contains an introduction and safety rules section, followed by detailed sections on the engine, clutch, transmission, four-wheel drive system, front and rear axle systems, power take-off, brakes and controls, hydraulic systems, steering, wheels, cab climate control, electrical systems, and platform, cab, bodywork, and decals. The manual provides maintenance and repair instructions for authorized workshops and notes the importance of using only genuine spare parts.
New holland td5.115 tractor service repair manualfusefjsekkemm
This service manual provides information on servicing engines for TD5.65, TD5.75, TD5.85, TD5.95, TD5.105 and TD5.115 tractors. It covers the engine and crankcase, valve drive and gears, crankshaft and flywheel, fuel injection system, engine cooling system, and fan and drive. Technical data, torque specifications, and required special tools are included for each engine model.
New Holland TD5.105 Tractor Service Repair Manual.pdffusedkdm9id
The document provides service information for exhaust gas recirculation systems on various tractor models. It includes technical specifications, descriptions of component operation, instructions for removing and installing diesel particulate filters, and diagnostic procedures for exhaust gas recirculation and particulate filter faults.
New Holland TD5.115 Tractor Service Repair Manual.pdffusedkdm9id
The document provides service information for exhaust gas recirculation systems on various tractor models. It includes technical specifications, descriptions of component operation, instructions for removing and installing diesel particulate filters, and diagnostic procedures for exhaust gas recirculation and particulate filter faults.
New Holland TD5.95 Tractor Service Repair Manual.pdffusedkdm9id
The document provides service information for exhaust gas recirculation systems on various tractor models. It includes technical specifications, descriptions of component operation, instructions for removing and installing diesel particulate filters, and diagnostic procedures for exhaust gas recirculation and particulate filter faults.
Similar to New holland td5.85 tractor service repair manual (20)
Caterpillar cat 330 l excavator (prefix 8fk) service repair manual (8fk00001 ...fjsjekdmmeme
This document provides instructions for removing and installing a cylinder head on a 330L excavator with a 3306 engine. The key steps are:
1. Remove components attached to the cylinder head like the exhaust manifold, fuel lines, and rocker shaft.
2. Remove the cylinder head bolts and lifting the heavy cylinder head off the engine.
3. Clean the mating surfaces and install a new gasket before reinstalling the cylinder head and torquing the bolts in the specified sequence.
4. Reinstall the removed components like the rocker shaft after installing the new cylinder head.
Caterpillar cat 330 l excavator (prefix 5ym) service repair manual (5ym00001 ...fjsjekdmmeme
The document provides instructions for installing a cylinder head on a Caterpillar 330 excavator engine. It describes:
1. Removing the fuel injection lines, exhaust manifold, and rocker shaft/pushrods before removing the cylinder head.
2. Removing the water pump elbow, inlet manifold, and air inlet pipe to access the cylinder head bolts.
3. Using a lifting device to safely remove the 95 kg cylinder head from the engine block.
4. Cleaning all parts to prevent contamination before reinstallation.
Caterpillar cat 330 c fm excavator (prefix b4n) service repair manual (b4n000...fjsjekdmmeme
This document provides instructions for servicing components of a Caterpillar 330C FM Excavator engine, including:
- Installing the cylinder head, which involves positioning a new gasket, attaching lifting tools to the head, applying anti-seize compound, and tightening bolts in a specific sequence.
- Removing and installing the camshaft, which requires removing other parts first like the rocker arm and front cover, then using hooks to position lifters and removing/installing the camshaft.
- Removing and installing the camshaft gear by first removing the camshaft, pressing it off the gear, heating the gear, and pressing it back onto the camshaft
Caterpillar cat 330 c fm excavator (prefix b2l) service repair manual (b2l000...fjsjekdmmeme
This document provides instructions for removing and installing the cylinder head and camshaft on a Caterpillar 330C FM excavator equipped with a C-9 engine. The removal procedure involves draining coolant, removing various components attached to the cylinder head like the alternator and valve cover, then using lifting tools to remove the cylinder head and gasket. The installation procedure outlines reinstalling the gasket and cylinder head, reattaching all components and refilling the cooling system. Similarly, the camshaft removal involves setting piston timing, removing gears and thrust plate, while installation requires lubricating and inserting the camshaft ensuring proper timing of gears.
Caterpillar cat 330 b ln excavator (prefix 5lr) service repair manual (5lr000...fjsjekdmmeme
This document provides instructions for removing and installing various engine components on Caterpillar 330B L and 330B LN excavator models, including the cylinder head, spacer plate, water directors, lifter group, and camshaft. The procedures describe cleaning parts, applying lubricants, and tightening bolts to specified torques. Detailed illustrations show the component locations and assembly sequences.
Caterpillar cat 330 b ln excavator (prefix 3yr) service repair manual (3yr000...fjsjekdmmeme
The document provides instructions for servicing components of a 330B L excavator including:
1. Installing a compression brake on the engine and connecting wires.
2. Removing and assembling the rocker shaft and pushrods, including disassembling the rocker shaft into individual components.
3. Removing the cylinder head from the engine which involves removing manifold, pushrods, and bolts holding the head in place. Proper lifting equipment is needed due to the head's weight.
Caterpillar cat 330 b l excavator (prefix 6dr) service repair manual (6dr0000...fjsjekdmmeme
The documents provide instructions for servicing the valve train components of a Caterpillar 3306 engine. The documents describe how to remove and install the rocker shaft and pushrods, disassemble and assemble the rocker shaft, and remove and install the cylinder head. The procedures note to keep parts clean, identify pushrod locations, torque fasteners correctly, and lift the cylinder head carefully due to its weight.
Caterpillar cat 330 b l excavator (prefix 5lr) service repair manual (5lr0000...fjsjekdmmeme
This document provides instructions for removing and installing various engine components on Caterpillar 330B L and 330B LN excavator models, including the cylinder head, spacer plate, water directors, lifter group, and camshaft. The procedures describe cleaning parts, applying lubricants, and tightening bolts to specified torques. Detailed illustrations show the components and steps in the process.
Caterpillar cat 330 b l excavator (prefix 3yr) service repair manual (3yr0000...fjsjekdmmeme
The document provides instructions for servicing components of a 330B L excavator including:
1. Installing a compression brake on the engine and connecting wires.
2. Removing and assembling the rocker shaft and pushrods, including disassembling the rocker shaft into individual components.
3. Removing the cylinder head from the engine which involves removing manifold, pushrods, bolts, and using a lifting device due to the head's weight of 95 kg.
Caterpillar cat 318 b n excavator (prefix 7kz) service repair manual (7kz0000...fjsjekdmmeme
The document provides instructions for removing and installing various engine components on a Caterpillar 3046 engine, including:
- Removing the flywheel by drilling holes in it and using a lifting strap and tool.
- Installing a new crankshaft rear seal using sealing tools and bolts.
- Removing the flywheel housing by loosening bolts while supported by a lifting tool.
- Removing the vibration damper and pulley by loosening bolts and nuts using sockets and pullers.
Caterpillar cat 318 b ln excavator (prefix 7kz) service repair manual (7kz000...fjsjekdmmeme
The document provides instructions for removing and installing various engine components on a Caterpillar 3046 engine, including:
- Removing the flywheel by drilling holes in it and using a lifting strap and tool.
- Installing a new crankshaft rear seal using sealing tools and bolts.
- Removing the flywheel housing by loosening bolts while supported by a lifting tool.
- Removing the vibration damper and pulley by loosening bolts and nuts using sockets and pullers.
Caterpillar cat 318 b l excavator (prefix 7kz) service repair manual (7kz0000...fjsjekdmmeme
The document provides instructions for removing and installing various engine components on a Caterpillar 3046 engine, including:
- Removing the flywheel by drilling holes in it and using a lifting strap and tool.
- Installing a new crankshaft rear seal using sealing tools and installing the flywheel back on with bolts.
- Removing the flywheel housing by removing bolts with a lifting strap and tool, and installing a new gasket and housing.
- Removing the vibration damper and pulley by removing bolts and nuts with sockets and a puller tool if needed.
Caterpillar cat 315 d l excavator (prefix kbd) service repair manual (kbd0000...fjsjekdmmeme
This document provides instructions for disassembling and assembling the final drive of a 315D L excavator. The disassembly process involves using various tools to remove over 30 individual components from the final drive housing. The assembly process reverses the disassembly steps and provides details on installing bearings, seals, gears, and other components back into the housing using presses, lifting devices, and installation tools. Precise measurements are taken to determine the correct shim thickness for preloading the bearings. Cleanliness and lubrication of parts is emphasized throughout.
Caterpillar cat 315 c excavator (prefix cfl) service repair manual (cfl00001 ...fjsjekdmmeme
1) The document provides step-by-step instructions for disassembling and assembling the final drive of a 315C excavator.
2) It details 21 steps for disassembly, including removing gears, shafts, seals, and housing components.
3) The 19 steps for assembly describe installing these same parts in reverse order, with notes on cleaning, lubricating, and using various tools to set proper torque and clearance.
Caterpillar cat 311 c u excavator (prefix pad) service repair manual (pad0000...fjsjekdmmeme
The document provides disassembly instructions for the final drive, travel motor, travel brake valve, and traction control valve of an excavator model 311C. It lists the required tools and parts and provides step-by-step instructions and illustrations for removing components like gears, plates, pistons, springs, and seals from each assembly. Safety warnings are included to take precautions for released spring forces during disassembly.
Caterpillar cat 311 c u excavator (prefix cke) service repair manual (cke0000...fjsjekdmmeme
This service repair manual provides instructions for removing and installing inlet and exhaust valve seals on models 311C and 311C U excavators. The document describes the required tools and provides a step-by-step procedure for removing the old seals and installing new seals. It also includes instructions for removing and installing the engine oil filter base and engine oil cooler.
Caterpillar cat 311 c excavator (prefix pad) service repair manual (pad00001 ...fjsjekdmmeme
The document provides disassembly instructions for the final drive, travel motor, travel brake valve, and traction control valve of an excavator model 311C. It lists the required tools and parts and provides step-by-step instructions and illustrations for removing components like gears, plates, pistons, springs, and seals from each assembly. Safety warnings are included to take precautions for released spring forces during disassembly.
Caterpillar cat 311 c excavator (prefix cke) service repair manual (cke00001 ...fjsjekdmmeme
This service repair manual provides instructions for removing and installing inlet and exhaust valve seals on models 311C and 311C U excavators. The document describes the required tools and provides a step-by-step procedure for removing the old seals and installing new seals. It also includes instructions for removing and installing the engine oil filter base and engine oil cooler.
Caterpillar cat 311 b track type excavator (prefix 2ls) service repair manual...fjsjekdmmeme
This document provides instructions for servicing components of a 311B excavator engine, including:
1) Instructions for assembling the rocker shaft, including the components and installation steps.
2) Instructions for installing the rocker shaft and pushrods, including torque specifications.
3) Instructions for removing the cylinder head, including removal steps and safety notices.
Caterpillar cat 16 h na motor grader (prefix 6zj) service repair manual (6zj0...fjsjekdmmeme
This document provides instructions for removing and installing various engine components on a 16H NA Motor Grader with a 3406C engine, including:
1. Timing gears and plate
2. Camshaft
3. Camshaft bearings
4. Connecting rod bearings
5. Crankshaft main bearings
The instructions describe each removal and installation step in detail and include notes about proper procedure, tool usage, torque specifications and checks to perform.
car rentals in nassau bahamas | atv rental nassau bahamasjustinwilson0857
At Dash Auto Sales & Car Rentals, we take pride in providing top-notch automotive services to residents and visitors alike in Nassau, Bahamas. Whether you're looking to purchase a vehicle, rent a car for your vacation, or embark on an exciting ATV adventure, we have you covered with our wide range of options and exceptional customer service.
Website: www.dashrentacarbah.com
Top-Quality AC Service for Mini Cooper Optimal Cooling PerformanceMotor Haus
Ensure your Mini Cooper stays cool and comfortable with our top-quality AC service. Our expert technicians provide comprehensive maintenance, repairs, and performance optimization, guaranteeing reliable cooling and peak efficiency. Trust us for quick, professional service that keeps your Mini Cooper's air conditioning system in top condition, ensuring a pleasant driving experience year-round.
Kalyan chart DP boss guessing matka results➑➌➋➑➒➎➑➑➊➍
8328958814Satta Matka is a number-based game. There are several markets, each with its owner responsible for releasing the lottery satta Matka market results on time. Kalyan market, Worli market, main Mumbai market, Rajdhani market, and Milan market are some of the main markets or bazaars involved in the satta Matka game. The oldest and most legitimate markets are in Kalyan and Main Mumbai. Every Satta Market has an open and close time. The satta results for these markets are published on or shortly after the open and close times. During the open result, two numbers are decoded, one of which is a three-digit number and the other a single-digit number. Similarly, three-digit and single-digit numbers are declared during the satta market's close. The last digit after adding the three digits of the open or close result is usually the single digit declared during the open and close results.KALYAN MATKA | MATKA RESULT | KALYAN MATKA TIPS | SATTA MATKA | MATKA.COM | MATKA PANA JODI TODAY | BATTA SATKA | MATKA PATTI JODI NUMBER | MATKA RESULTS | MATKA CHART | MATKA JODI | SATTA COM | FULL RATE GAME | MATKA GAME | MATKA WAPKA | ALL MATKA RESULT LIVE ONLINE | MATKA RESULT | KALYAN MATKA RESULT | DPBOSS MATKA 143 | MAINSATTA MATKA SATTA FAST RESULT KALYAN TOP MATKA RESULT KALYAN SATTA MATKA FAST RESULT MILAN RATAN RAJDHANI MAIN BAZAR MATKA FAST TIPS RESULT MATKA CHART JODI CHART PANEL CHART FREE FIX GAME SATTAMATKA ! MATKA MOBI SATTA 143 spboss.in TOP NO1 RESULT FULL RATE MATKA ONLINE GAME PLAY BY APP SPBOSSdp boss net, dp satta, dpboss dpboss, indian satta matka, kalyan matkà result today , matka boss, matka result live, matka satta result today, satamatka com, satta boss, satta matka king, sattamatkà, sattamatkà result, sattamatta com, sattmatka sattmatka, star matka, tara matka, tara satta matka, worli matka, indian matka, matka live, kalyan guessing, satta fix, kalyan final ank, dp matka, dpboss net, sata mata com, सट्टा मटका, sattamatkà 143, golden matka, satta matta matka 143, satta fast, kalyan open, satta 143, dpboss 143 guessing, dpboss satta, golden satta matka, satta bajar
Satta Matka Market is India's leading website providing the quickest sattamatka outcome, experienced in Satta Matka game. Our services include free Satta Matka Trick and Tips for Kalyan Matka and Disawar Satta King, as well as satta matka graphs, online play, tips and more. Our team of experts strive to help you recoup your losses quickly through our proposals such as Free Satta Matka Tips and Kalyan Bazar Tips. We are known as India's best Matka DpBoss portal site, here to deliver updates on all sorts of Satta Market like Kalyan Bazar, Milan, Rajdhani, Time Bazaar, Main and the most current charts. Stay tuned with us for more live updates on the Satta market
Automotive Engine Valve Manufacturing Plant Project Report.pptxSmith Anderson
The report provides a complete roadmap for setting up an Automotive Engine Valve. It covers a comprehensive market overview to micro-level information such as unit operations involved, raw material requirements, utility requirements, infrastructure requirements, machinery and technology requirements, manpower requirements, packaging requirements, transportation requirements, etc.
8. INTRODUCTION
Note to the Owner
General instructions
Important notice
All maintenance and repair operations described in this manual should be carried out exclusively by the NEW HOL-
LAND authorised workshops. All instructions detailed should be carefully observed and special equipment indicated
should be used if necessary.
Everyone who carries out service operations described without carefully observing these prescriptions will be directly
responsible of deriving damages.
Shimming
At each adjustment, select adjusting shims, measure them individually using a micrometer and then sum up recorded
values. Do not rely on measuring the whole shimming set, which may be incorrect, or on rated value indicated for
each shim.
Rotating shaft seals
To correctly install rotating shaft seals, observe the following instructions:
• Let the seal soak into the same oil as it will seal for at least half an hour before mounting.
• Thoroughly clean the shaft and ensure that the shaft working surface is not damaged.
• Place the sealing lip towards the fluid. In case of a hydrodynamic lip, consider the shaft rotation direction and orient
grooves in order that they deviate the fluid towards the inner side of the seal.
• Coat the sealing lip with a thin layer of lubricant (oil rather than grease) and fill with grease the gap between the
sealing lip and the dust lip of double lip seals.
• Insert the seal into its seat and press it down using a flat punch. Do no tap the seal with a hammer or a drift.
• Take care to insert the seal perpendicularly to its seat while you are pressing it. Once the seal is settled, ensure
that it contacts the thrust element if required.
• To prevent damaging the sealing lip against the shaft, place a suitable protection during installation.
O-rings
Lubricate the O-rings before inserting them into their seats. This will prevent the O-rings from rolling over and twine
during mounting which will jeopardise sealing.
Sealers
Apply one of the following sealers: RTV SILMATE, RHODORSIL CAF 1, or LOCTITE PLASTIC GASKET over the
mating surfaces marked with an X.
Before applying the sealer, prepare the surface as follows:
• Remove possible scales using a metal brush.
• Thoroughly degrease the surfaces using one of the following cleaning agent: trichlorethylene, petrol or a water and
soda solution.
Bearings
It is advisable to heat the bearings to 80 - 90
°C (176 - 194
°F) before mounting them on their shafts and cool them
down before inserting them into their seats with external tapping.
Roll pins
When fitting straight roll pins, ensure that the pin notch is oriented in the direction of the effort to stress the pin. Coil
roll pins can be installed in any position.
47445474 30/08/2013
3
9. INTRODUCTION
Notes for spare parts
Use exclusively genuine NEW HOLLAND spare parts.
Only genuine parts guarantee same quality, life, safety as original components as they are the same as mounted in
production.
Only the NEW HOLLAND genuine spare parts can offer this guarantee.
All spare parts orders should be complete with the following data:
• Tractor model (commercial name) and frame number.
• Engine type and number.
• Part number of the ordered part, which can be found on the “Microfiches” or the “Spare parts catalogue”, which is
the base for order processing.
Notes for equipment
Equipment which NEW HOLLAND proposes and shows in this manual are as follows:
• Studied and designed expressly for use on NEW HOLLAND tractors.
• Necessary to make a reliable repair.
• Accurately built and strictly tested to offer efficient and long-lasting working means.
We also remind the repair personnel that having these equipment means:
• Work in optimal technical conditions.
• Obtain best results.
• Save time and effort.
• Work more safely.
Notices
Wear limits indicated for some details should be intended as advised, but not binding values. The words “front”, “rear”,
“right hand”, and “left hand” referred to the different parts should be intended as seen from the operator’s seat oriented
to the normal sense of movement of the tractor.
How to move the tractor with the battery removed
Cables from the external power supply should be connected exclusively to the respective terminals of the tractor
positive and negative cables using pliers in good condition which allow proper and steady contact.
Disconnect all services (lights, wind-shield wipers, etc.) before starting the tractor
If it is necessary to check the tractor electrical system, check it only with the power supply connected. At check end,
disconnect all services and switch the power supply Off before disconnecting the cables.
47445474 30/08/2013
4
10. INTRODUCTION
Safety rules
Pay attention to this symbol
This warning symbol points out important messages involving personal safety. Carefully read the safety
rules contained herein and follow advised precautions to avoid potential hazards and safeguard your
safety and personal integrity. In this manual you will find this symbol together with the following key-
words:
WARNING – It gives warning about improper repair operations and deriving potential consequences af-
fecting the service technician’s personal safety.
DANGER – It gives specific warning about potential dangers for personal safety of the operator or other
persons directly or indirectly involved.
To prevent accidents
Most accidents and personal injuries taking place in workshops are due from non-observance of some simple and
essential prudential rule and safety precautions. For this reason, IN MOST CASES THEY CAN BE AVOIDED. It
suffices to foresee possible causes and act consequently with necessary caution and care.
The possibility that an accident might occur with any type of machines should not be disregarded, no matter how well
the machine in question was designed and built.
A wise and careful service technician is the best precautions against accidents.
Careful observance of this only basic precaution would be enough to avoid many severe accidents.
DANGER: Never carry out any cleaning, lubrication or maintenance operations when the engine is running.
Safety rules
Generalities
• Carefully follow specified repair and maintenance procedures.
• Do not wear rings, wristwatches, jewels, unbuttoned or flapping clothing such as ties, torn clothes, scarves, open
jackets or shirts with open zips which could get hold into moving parts. We advise to use approved safety clothing
such as anti-slipping footwear, gloves, safety goggles, helmets, etc.
• Never carry out any repair on the machine if someone is sitting on the operator’s seat, except if they are certified
operators to assist in the operation to be carried out.
• Never operate the machine or use attachments from a place other than sitting at the operator’s seat.
• Never carry out any operation on the machine when the engine is running, except when specifically indicated.
• Stop the engine and ensure that all pressure is relieved from hydraulic circuits before removing caps, covers, valves,
etc.
• All repair and maintenance operations should be carried out with the greatest care and attention.
• Service stairs and platforms used in a workshop or in the field should be built in compliance with the safety rules in
force.
• Disconnect the batteries and label all controls to warn that the tractor is being serviced. Block the machine and all
equipment which should be raised.
• Never check or fill fuel tanks and accumulator batteries, nor use starting liquid if you are smoking or near open
flames as such fluids are flammable.
• Brakes are inoperative when they are manually released for maintenance purposes. In such cases, the machine
should be kept constantly under control using blocks or similar devices.
• The fuel filling gun should remain always in contact with the filler neck. Maintain this contact until the fuel stops
flowing into the tank to avoid possible sparks due to static electricity buildup.
• Use exclusively specified towing points for towing the tractor. Connect parts carefully. Ensure that foreseen pins
and/or locks are steadily fixed before applying traction. Do not stop near towing bars, cables or chains working
under load.
47445474 30/08/2013
5
16. Engine - Engine and crankcase
Engine - General specification
TD5.
Table 1
General specification 4 Cylinders
Engine, technical type:
TD5.95 model - type F4CE9487N*J (BOSCH pump)
TD5.105 model - type F4CE9484L*J (BOSCH pump)
TD5.115 model - type F4CE9484C*J (BOSCH pump)
Cycle Diesel, 4-stroke
Fuel injection Direct
Number of cylinders in line 4
Piston diameter:
Model TD5.95, TD5.105, TD5.115 104
mm (4.0945
in)
Piston stroke 132
mm (5.1969
in)
Total displacement:
Model TD5.95, TD5.105, TD5.115 4485
cm³ (273.69
in³)
Compression ratio for models TD5.95, TD5.105, TD5.115 17.5:1
Maximum power:
Model TD5.95 - type F4CE9487N*J 70
kW (95
Hp)
Model TD5.105 - type F4CE9484L*J 78
kW (106
Hp)
Model TD5.115 - type F4CE9484C*J 83
kW (113
Hp)
Maximum torque: : TD5.95 - type F4CE9487N*J 390
N·m (3452
lb in)
Maximum torque: TD5.105 - type F4CE9484L*J 425
N·m (3762
lb in)
Maximum torque: TD5.115 - type F4CE9484C*J 450
N·m (3983
lb in)
Maximum torque speed 1300
RPM
Number of main bearings 5
Sump Structural, cast iron
Lubrication Forced, with lobe pump
Pump drive Camshaft
Engine speed/oil pump speed ratio 1:1
Oil cleaning
Mesh filter on oil intake and filtering cartridge
on delivery line
Normal oil pressure with motor warmed-up
At slow idling speed 1.2
bar (17.4
psi)
At fast idling speed 3.8
bar (55.1
psi)
Cooling system Coolant circulation
Radiator on models TD5.95, TD5.105, TD5.115 4 lines of vertical pipes with copper fins
Fan, attached to the pulley Intake, in plastic with 10 blades
Coolant pump Centrifugal vane-type
Engine speed/coolant pump speed ratio 1:1.977
Coolant thermometer Coloured scale divided into 3 sections
Temperature ranges corresponding to each section:
Initial blue section 40 - 60
°C (104 - 140
°F)
Middle green section (normal working conditions) 60 - 110
°C (140 - 230
°F)
Final red section 110 - 120
°C (230 - 248
°F)
Temperature control Via thermostat valve
Initial opening 81 - 85
°C (178 - 185
°F)
Timing system Overhead valves operated by tappets, rods
and rocker arms via the camshaft located in
the engine block; the camshaft is driven by
the crankshaft using straight-tooth gears
Intake:
Start: before T.D.C. 10°± 30’
End: after B.D.C. 10°± 30’
Exhaust:
47445474 30/08/2013
10.1 [10.001] / 4
17. Engine - Engine and crankcase
General specification 4 Cylinders
Start: before B.D.C. 64°
End: after B.D.C. 26°
Valve-rocker arm clearance (with engine cold)
Intake 0.20 - 0.30
mm (0.0079 - 0.0118
in)
Exhaust 0.45 - 0.55
mm (0.0177 - 0.0217
in)
For further timing system technical data see 8
Fuel system
Air cleaning
Dual cartridge dry air filter, with clogged
filter indicator with centrifugal pre-filter and
automatic dust ejector
Fuel pump With double diaphragm
Fuel filtering
Through wire filter in fuel supply pump, and
replaceable cartridge on delivery line to
injection pump
Minimum fuel flow rate with pump shaft rotating at 1800
RPM 127.6
l/hour (34
US gal/hour)
Cam operated Engine timing
BOSCH injection pump Rotating distributor type
All-speed governor, incorporated in pump:
BOSCH Centrifugal counterweights
Automatic advance regulator, incorporated in pump:
BOSCH Hydraulic
For further fuel system technical data:
Fixed advance (pump setting for start of delivery before TDC) -
Pressure setting - Injection order, and other information regarding
the BOSCH pump
Refer to the data for the relevant engine type
in the table 1
Table 2
Turbo charger:
For versions F4CE9487N*J:
Type HOLSET HX25W TB11H/A085BXL
For versions F4CE9484L*J:
Type HOLSET HX25W TB11K/A11CXL
For versions F4CE9484L*J:
Type HOLSET HX25W TB11K/A11CXL
Injection pump Rotating distributor with speed governor and
advance regulator incorporated
BOSCH pump:
TD5.95 model - type F4CE9487N*J VE 4/12 F1250 L2023 (S/N 504218827)
TD5.105 model - type F4CE9484L*J E 4/12 F
TD5.115 model - type F4CE9484C*J E 4/12 F
Direction of rotation Anticlockwise
Injection order 1-3-4-2 (For all models)
Table 3
TD5.95 TD5.105 TD5.115
BOSCH - type injectors:
F4CE9487N*J
504254390 DSLA
145 P 1441
- -
F4CE9484L*J -
504254390 DSLA
145 P 1441
-
F4CE9484C*J - -
504254390 DSLA
145 P 1441
Number of nozzle holes 7 7 7
Nozzle hole diameter mm:
F4CE9487N*J 0 192 - -
F4CE9484L*J - 0 192 -
47445474 30/08/2013
10.1 [10.001] / 5
18. Engine - Engine and crankcase
Engine - Overview
TD5.95, TD5.105, TD5.115
View of TD5.95 tractor engines of 70
kW (95
Hp), TD5.105 of 78
kW (106
Hp) and TD5.115
tractor engines of 83
kW (113
Hp)
ANIL12TR00052GA 1
47445474 30/08/2013
10.1 [10.001] / 21
19. Engine - Engine and crankcase
Lubrication diagram for engines model. TD5.95, TD5.105 and TD5.115
ANIL12TR00053GA 2
Oil path under pressure
Oil return path under gravity
Forced-circulation lubrication is accomplished by the following components:
• Oil pump, housed at the front of the crankcase, driven by the grooved bushing keyed onto the shank of the crank-
shaft
• Water/oil cooler, housed in the crankcase
• Oil pressure control valve incorporated in the cooler assembly
• By pass valve to cut-off clogged oil filter, incorporated in the cooler assembly
• Cartridge oil filter
47445474 30/08/2013
10.1 [10.001] / 22
20. Engine - Engine and crankcase
Cooling system diagram
ANIL12TR00054GA 3
The forced circulation, closed-circuit engine cooling system is composed of the following components:
• A lubricating oil cooler
• A centrifugal coolant pump housed at the front of the crankcase
• A thermostat valve governing coolant circulation
47445474 30/08/2013
10.1 [10.001] / 23
21. Engine - Engine and crankcase
Engine - Exploded view
TD5.95, TD5.105, TD5.115
Details of cylinder head with valve seats fitted in engines model. TD5.95, TD5.105, TD5.115
ANIL12TR00055GB 1
1. Exhaust manifold 4. Fitted valve seats
2. Intake manifold 5. Thermostat valve
3. Air heater 6. Injector
47445474 30/08/2013
10.1 [10.001] / 24
23. Engine - Engine and crankcase
Engine - Overview (8000 Engine)
TD5.65, TD5.75
ANIL12TR01252GB 1
Longitudinal section of 3-cylinder TD5. 65 and TD5. 75 Models
1. Rocker shaft pedestal bolts 5. Big-end cap bolts
2. Cylinder head bolts 6. Fan and alternator pulley bolts
3. Flywheel bolts 7. Crankshaft hub bolts
4. Main bearing cap bolts
47445474 30/08/2013
10.1 [10.001] / 26
24. Engine - Engine and crankcase
ANIL12TR01253GA 2
Cross-section of 3-cylinder TD5. 65 and TD5. 75 Models
47445474 30/08/2013
10.1 [10.001] / 27
25. Engine - Engine and crankcase
ANIL12TR01254H 3
Lubrication system of normally aspirated 3-cylinder engines
47445474 30/08/2013
10.1 [10.001] / 28
26. Engine - Engine and crankcase
1. Oil filler cap 5. Dipstick
2. Filter safety valve (opens when oil pressure at filter
inlet exceeds the outlet pressure by 1.5
bar/cm2 –
1.7
bar/cm2 ( 140.355
psi/in2 – 140.355
psi/in2)
6. Pump
3. Filter 7. Oil pressure limiting valve
4. Switch for low engine oil pressure warning (on
dashboard)
8. Screen filter on pick-up pipe
47445474 30/08/2013
10.1 [10.001] / 29
27. Engine - Engine and crankcase
Engine - Remove (NEF Engine)
TD5.
1. Disconnect the battery negative lead (1).
2. Drain the oil from the transmission-gearbox housing.
3. Drain the cooling system.
ANIL12TR00057AB 1
4. Remove the exhaust pipe, attach lifting chains (2) to
the bonnet (1) and attach the chain to the hoist.
ANIL12TR00058AB 2
5. Disconnect the electrical connection (1) of bonnet.
ANIL12TR00059AB 3
6. Detach the gas struts (1) from the bonnet.
ANIL12TR00060AB 4
47445474 30/08/2013
10.1 [10.001] / 30
28. Engine - Engine and crankcase
7. Remove the four bonnet hinge bolts (1) and lift the bon-
net clear.
ANIL12TR00061AB 5
8. Remove the two retaining bolts (1) and the guard (2)
on the right-left hand side of the fan.
ANIL12TR00062AB 6
9. Unscrew the nut (1) from the weight retaining pin. Re-
move the weights from the front support.
ANIL12TR00063AB 7
10. Unscrew the front central and rear retaining bolts on
the front axle shaft guard, then remove the guard (1).
ANIL12TR00065AB 8
47445474 30/08/2013
10.1 [10.001] / 31
29. Engine - Engine and crankcase
11. Remove the circlip (2) and move the front sleeve (1) in
the direction indicated by the arrow until it is released
from the groove on the front axle.
ANIL12TR00066AB 9
12. Remove the circlip (2) and move the rear sleeve (1) in
the direction indicated by the arrow until it is released
from the groove on the drive.
ANIL12TR00067AB 10
13. Remove the propeller shaft central support (1) retain-
ing bolts and extract the shaft together with the sup-
port.
ANIL12TR00068AB 11
14. Remove the retaining bolts (1) of the suction pipe (2)
of the lift pump.
ANIL12TR00069AB 12
47445474 30/08/2013
10.1 [10.001] / 32
30. Engine - Engine and crankcase
15. Disconnect the delivery and return lines from the hy-
draulic lift pump.
ANIL12TR00070AB 13
16. Detach the cab heating pipes (1) and (2).
ANIL12TR00071AB 14
17. Detach the cab air-conditioning pipes (1) and (2).
ANIL12TR00072AB 15
18. Extract the plastic fasteners (2) and detach the diesel
recovery pipe (3) and delivery pipe (4) to the diesel
pump (1).
ANIL12TR00073AB 16
47445474 30/08/2013
10.1 [10.001] / 33
31. Thank you very much for
your reading. Please Click
Here. Then Get COMPLETE
MANUAL. NO WAITING
NOTE:
If there is no response to
click on the link above,
please download the PDF
document first and then
click on it.
32. Engine - Engine and crankcase
19. Remove two metal clamps (2) and the rigid pipe of
drawing oil from the transmission housing via lift pump
(1) and power steering pump. Remove the fitting of
the delivery pipe.
ANIL12TR00074AB 17
20. Remove the electrical connection from the brake fluid
reservoir and take the brake fluid reservoir (1) from the
bracket.
ANIL12TR00075AB 18
21. Disconnect the steering oil delivery and return hoses
(1) and (2).
ANIL12TR00076AB 19
22. Disconnect A/C compressor inlet (2) and outlet (1)
hoses.
ANIL12TR00077AB 20
47445474 30/08/2013
10.1 [10.001] / 34
33. Engine - Engine and crankcase
23. Disconnect the connector (1) of the harness between
engine side and cab side.
ANIL12TR00078AB 21
24. Remove the retaining clips (1) and detach the flexible
cables governing the hand throttle and pedal throttle.
25. Remove the retaining clip (2) and detach the throttle
control tie-rod connected to the injection pump.
ANIL12TR00079AB 22
26. Disconnect the electrical connections from alternator
(1) and starter motor (2).
ANIL12TR00080AB 23
27. Disconnect the electrical connections of dryer filter
sensor (1) and water in fuel sensor (2).
ANIL12TR00081AB 24
47445474 30/08/2013
10.1 [10.001] / 35
34. Engine - Engine and crankcase
28. Remove the electrical connection (1) and air filter clog-
ging sensor (2).
ANIL12TR00082AB 25
29. Remove the two retaining bolts and the support to-
gether with relays protecting system (1).
ANIL12TR00083AB 26
30. Loosen the corresponding retaining clamps and ex-
tract the pipes (1), (2) and (3).
ANIL12TR00084AB 27
31. Hitch the engine to the hoist with the chains anchour-
ing it to the attachments on the engine.
ANIL12TR00085AB 28
47445474 30/08/2013
10.1 [10.001] / 36
35. Engine - Engine and crankcase
32. Position a fixed stand under the over drive clutch
housing near the engine attachment flanging and
apply the hand brake.
ANIL12TR00086AB 29
33. Position the movable tool for dismantling tractors
380000569 with the bracket 380000500 and adapter
plate 380000844 under the engine and place a
wooden block in between the points of contact be-
tween the tool and tractor.
ANIL12TR00087AB 30
34. Remove tightening bolts (1) of floor mat fixing bracket
(2) and take the brackets from both sides. Than re-
move floor mat (3).
ANIL12TR00088AB 31
35. Remove four fixing bolts (1) of small cover (2) front
side of the floor. Than remove the cover (2) and re-
lease two top transmission fixing bolts using that gap.
ANIL12TR00089AB 32
47445474 30/08/2013
10.1 [10.001] / 37
36. Engine - Engine and crankcase
36. Remove the remaining six retaining bolts at the bottom
and side.
ANIL12TR00090AB 33
37. Separate the engine from the transmission with the
tool 380000569.
ANIL12TR00091AB 34
38. Remove the spacer located between the engine and
the transmission.
ANIL12TR00092AB 35
39. Insert the fixed under the balast support and secure
the front wheels with wooden blocks.
ANIL12TR00093AB 36
47445474 30/08/2013
10.1 [10.001] / 38