The primary hydraulic power system for the combines includes multiple pumps that supply hydraulic fluid to various systems through a valve stack. The main components are the hydraulic pumps, oil tank, filters, valves, cylinders, and accumulators. Hydraulic flow is distributed to functions like the header, steering, and optional lateral flotation systems.
PERKINS 4.108M DIESEL ENGINE Service Repair Manual.pdfhmc151121
This workshop manual provides technical information for maintaining Perkins 4.108, 4.107, and 4.99 marine diesel engines. It includes sections on engine components, systems, fault diagnosis, and maintenance procedures. Perkins engines are customized for different applications, so the photos show general engine views rather than a specific specification.
PERKINS 4.107M DIESEL ENGINE Service Repair Manual.pdfhmc151121
This workshop manual provides technical information for maintaining Perkins 4.108, 4.107, and 4.99 marine diesel engines. It includes sections on engine components, systems, fault diagnosis, and maintenance procedures. Perkins engines are customized for different applications, so the manual does not depict any specific engine configuration but rather provides general guidance.
PERKINS 4.99M DIESEL ENGINE Service Repair Manual.pdfhmc151121
This workshop manual provides information for servicing Perkins 4.108, 4.107, and 4.99 marine diesel engines. It includes sections on technical data, operation and maintenance, fault diagnosis, and maintenance of engine components. The first pages provide an overview of the engine identification systems, contents of the manual, and a note regarding the use of genuine Perkins parts. Photographs of the engine components are also included.
Nissan Forklift Internal Combustion 1F4 Series Service Repair Manual.pdfhmc151121
The document provides information on servicing a Nissan forklift model 1F4 series, including:
- It is a service manual that contains maintenance and repair procedures to ensure safety and proper functioning.
- Any revisions will be announced in technical bulletins to supplement the manual.
- The manual consists of sections covering various systems, with the section symbols provided.
- Safety precautions for technicians are outlined, including proper jacking and lifting of the forklift.
Nissan Forklift Electric P02 Series Service Repair Manual.pdfhmc151121
This service manual provides maintenance and repair procedures for the NISSAN FORKLIFT P01 and P02 series. It consists of 14 sections covering general information, maintenance, control systems, batteries/chargers, electrical systems, motor mechanisms, differentials, axles, brakes, steering, hydraulics, loading mechanisms, and bodies/frames. The manual outlines how to use it, defines technical terms, and describes how to read wiring diagrams. Safety notices are included to ensure safe service procedures.
Nissan Forklift Electric P01 Series Service Repair Manual.pdfhmc151121
This service manual provides maintenance and repair procedures for the NISSAN FORKLIFT P01 and P02 series. It consists of 14 sections covering general information, maintenance, control systems, batteries/chargers, electrical systems, motor mechanisms, differentials, axles, brakes, steering, hydraulics, loading mechanisms, and bodies/frames. Any updates will be announced in technical bulletins to supplement the appropriate sections. Revised sections will replace applicable sections as needed. Precautions are outlined to ensure safety during procedures.
Nissan Forklift Electric 1N1 Series Service Repair Manual.pdfhmc151121
This document provides an introduction to a service manual for the NISSAN FORKLIFT 1N1 series. It explains that the manual contains maintenance and repair procedures and should be read thoroughly for safety. The manual consists of 14 sections covering general information, maintenance, control systems, batteries, electrical systems, motors, drive units, tires, brakes, rear axles, steering, hydraulics, loading mechanisms, bodies and frames, and options. Technical bulletins will announce any changes to models or sections. Proper service is important for safety and performance.
Nissan Forklift Electric 1B2 Series Service Repair Manual.pdfhmc151121
The document provides instructions for removing and installing a differential carrier. Key steps include draining the gear oil, removing the front wheels, brake components, and traction motor. The differential carrier is then removed from the axle housing or axle tubes are removed from the carrier. Installation involves cleaning mating surfaces, applying grease, and tightening bolts to the specified torques. Proper lifting techniques and plugging open lines are emphasized for safety.
PERKINS 4.108M DIESEL ENGINE Service Repair Manual.pdfhmc151121
This workshop manual provides technical information for maintaining Perkins 4.108, 4.107, and 4.99 marine diesel engines. It includes sections on engine components, systems, fault diagnosis, and maintenance procedures. Perkins engines are customized for different applications, so the photos show general engine views rather than a specific specification.
PERKINS 4.107M DIESEL ENGINE Service Repair Manual.pdfhmc151121
This workshop manual provides technical information for maintaining Perkins 4.108, 4.107, and 4.99 marine diesel engines. It includes sections on engine components, systems, fault diagnosis, and maintenance procedures. Perkins engines are customized for different applications, so the manual does not depict any specific engine configuration but rather provides general guidance.
PERKINS 4.99M DIESEL ENGINE Service Repair Manual.pdfhmc151121
This workshop manual provides information for servicing Perkins 4.108, 4.107, and 4.99 marine diesel engines. It includes sections on technical data, operation and maintenance, fault diagnosis, and maintenance of engine components. The first pages provide an overview of the engine identification systems, contents of the manual, and a note regarding the use of genuine Perkins parts. Photographs of the engine components are also included.
Nissan Forklift Internal Combustion 1F4 Series Service Repair Manual.pdfhmc151121
The document provides information on servicing a Nissan forklift model 1F4 series, including:
- It is a service manual that contains maintenance and repair procedures to ensure safety and proper functioning.
- Any revisions will be announced in technical bulletins to supplement the manual.
- The manual consists of sections covering various systems, with the section symbols provided.
- Safety precautions for technicians are outlined, including proper jacking and lifting of the forklift.
Nissan Forklift Electric P02 Series Service Repair Manual.pdfhmc151121
This service manual provides maintenance and repair procedures for the NISSAN FORKLIFT P01 and P02 series. It consists of 14 sections covering general information, maintenance, control systems, batteries/chargers, electrical systems, motor mechanisms, differentials, axles, brakes, steering, hydraulics, loading mechanisms, and bodies/frames. The manual outlines how to use it, defines technical terms, and describes how to read wiring diagrams. Safety notices are included to ensure safe service procedures.
Nissan Forklift Electric P01 Series Service Repair Manual.pdfhmc151121
This service manual provides maintenance and repair procedures for the NISSAN FORKLIFT P01 and P02 series. It consists of 14 sections covering general information, maintenance, control systems, batteries/chargers, electrical systems, motor mechanisms, differentials, axles, brakes, steering, hydraulics, loading mechanisms, and bodies/frames. Any updates will be announced in technical bulletins to supplement the appropriate sections. Revised sections will replace applicable sections as needed. Precautions are outlined to ensure safety during procedures.
Nissan Forklift Electric 1N1 Series Service Repair Manual.pdfhmc151121
This document provides an introduction to a service manual for the NISSAN FORKLIFT 1N1 series. It explains that the manual contains maintenance and repair procedures and should be read thoroughly for safety. The manual consists of 14 sections covering general information, maintenance, control systems, batteries, electrical systems, motors, drive units, tires, brakes, rear axles, steering, hydraulics, loading mechanisms, bodies and frames, and options. Technical bulletins will announce any changes to models or sections. Proper service is important for safety and performance.
Nissan Forklift Electric 1B2 Series Service Repair Manual.pdfhmc151121
The document provides instructions for removing and installing a differential carrier. Key steps include draining the gear oil, removing the front wheels, brake components, and traction motor. The differential carrier is then removed from the axle housing or axle tubes are removed from the carrier. Installation involves cleaning mating surfaces, applying grease, and tightening bolts to the specified torques. Proper lifting techniques and plugging open lines are emphasized for safety.
Nissan Forklift Electric 1B1 Series Service Repair Manual.pdfhmc151121
The document provides instructions for removing and installing a differential carrier. Key steps include draining the gear oil, removing the front wheels, brake components, and traction motor. The differential carrier is then removed from the axle housing or axle tubes are removed from the carrier. Installation involves cleaning mating surfaces, applying grease, and tightening bolts to the specified torques. Proper lifting techniques and plugging open lines are emphasized for safety.
Nissan Forklift A-frame - ATF Series Service Repair Manual.pdfhmc151121
The document is a service manual for the A-Ergo model of stand-on stacker trucks. It provides information on safety, technical specifications, dimensions, component details, and maintenance procedures. Key details include permitted lifting points, safety instructions for working on the truck, and specifications for components like the drive motor, gearbox, and hydraulic system. The manual is intended to enable quick and correct service of the A-Ergo truck models.
Nissan Forklift A-frame - ASN Series Service Repair Manual.pdfhmc151121
This document is the service manual for the A-Ergo model of stand-on stacker trucks made by ATLET. It provides information on the structure and contents of the manual, as well as safety instructions for working on the trucks. Technicians should take proper precautions such as locking out the mast, removing jewelry, and securing the truck before performing any service to avoid risk of injury. The manual also includes technical specifications and components of the A-Ergo trucks.
Nissan Forklift A-frame - AJN Series Service Repair Manual.pdfhmc151121
The document is a service manual for the A-Ergo model of stand-on stacker trucks. It provides information on safety, technical specifications, dimensions, component details, and maintenance procedures. Key details include permitted lifting points, safety instructions for working on the truck, and component specifications for items like the drive motor, gearbox, and hydraulic system. The manual is intended to enable quick and correct service of the A-Ergo truck models.
New Holland W300C Wheel Loader Service Repair Manual.pdfhmc151121
This document is a service manual for CNH Italia S.p.A. wheel loaders models W270C and W300C. It contains instructions and specifications for servicing and repairing components of the wheel loaders. The manual is divided into tabs covering general information, engines, fuel system, electrical systems, steering, powertrain, brakes, hydraulics, and mounted equipment. The document provided is the table of contents, which lists each section number and title. It does not contain any repair or service instructions.
New Holland W300C Tier 4 Wheel Loader Service Repair Manual.pdfhmc151121
This document is a service manual for a wheel loader that provides specifications and repair instructions. It contains sections on the engine, transmission, drivetrain, brakes, hydraulics, frames, steering, wheels, cab controls, electrical systems, attachments, and other components. Tables provide torque specifications for fasteners in decimal, metric, and hydraulic fitting sections.
New Holland W270C Wheel Loader Service Repair Manual.pdfhmc151121
This document is a service manual for CNH Italia S.p.A. wheel loaders models W270C and W300C. It contains instructions and specifications for servicing and repairing components of the wheel loaders. The manual is divided into tabs covering general information, engines, fuel system, electrical systems, steering, powertrain, brakes, hydraulics, and mounted equipment. The document provides an index of sections for each component system and instructions for tasks like removing and installing engines, radiators, transmissions, hydraulic pumps and more. Safety practices and torque specifications are also included.
New Holland W270C Tier 4 Wheel Loader Service Repair Manual.pdfhmc151121
This document is a service manual for a wheel loader that provides specifications and repair instructions. It contains sections on the engine, transmission, drivetrain, brakes, hydraulics, frames, steering, wheels, cab controls, electrical systems, attachments, and other components. Tables provide torque specifications for fasteners in decimal, metric, and hydraulic fitting sections.
New Holland W230C Wheel Loader Service Repair Manual.pdfhmc151121
This document provides instructions for removing the engine from a W230C Wheel Loader. It is a service manual section that outlines 16 steps for engine removal, including draining fluids, disconnecting wiring harnesses and hoses, removing mounting bolts, and lifting the engine out after the hood is raised. The overall process described provides the essential details to safely and properly remove the engine from the vehicle.
New Holland W230C Tier 4A (interim) Wheel Loader Service Repair Manual.pdfhmc151121
This service manual provides specifications and repair information for Tier 4A interim wheel loaders. It covers the engine, transmission, drivetrain, brakes, hydraulics, frames, steering, wheels, cab climate control, electrical systems, front loader, bucket, cab, and decals. The manual includes an introduction on safety rules, product identification, and general engine specifications for the W190C and W230C models.
New Holland W230C Tier 4 Wheel Loader Service Repair Manual.pdfhmc151121
This document provides instructions for removing the engine from a wheel loader. It involves marking components for reinstallation, draining fluids like coolant and oil, disconnecting batteries, and using lifting straps to remove the engine. Removal requires proper safety procedures and draining of hydraulic pressure before disconnecting hoses and electrical connections.
New Holland W190C Wheel Loader Service Repair Manual.pdfhmc151121
This section of the service manual provides instructions for removing and installing the engine and radiator on a W190C Wheel Loader. The engine removal process involves disconnecting battery cables, draining fluids, removing mounting brackets and the drive belt. Engine installation is the reverse of removal. Radiator removal involves draining coolant and disconnecting hoses, while installation reconnects all hoses and refills the coolant.
New Holland W190C Tier 4A (interim) Wheel Loader Service Repair Manual.pdfhmc151121
This service manual provides specifications and repair information for Tier 4A interim wheel loaders. It covers the engine, transmission, four-wheel drive system, front and rear axle systems, brakes, hydraulic systems, frames, steering, wheels, cab climate control, electrical systems, front loader, platform and safety features. The manual includes an introduction on safety procedures and product identification.
New Holland W190C Tier 4 Wheel Loader Service Repair Manual.pdfhmc151121
The document provides step-by-step instructions for removing the engine from a W190C Wheel Loader. Key steps include draining fluids, disconnecting wiring harnesses and hoses, removing the hood and mounting brackets, and then lifting the engine out of the machine. Specific components addressed include the radiator, air cleaner, muffler, belts, and hoses connecting the engine to other systems. Safety precautions are noted such as releasing pressure from hydraulic and cooling systems before disconnection.
New Holland W170C Wheel Loader Service Repair Manual.pdfhmc151121
This section provides instructions for removing and installing the engine and radiator on a W170C Wheel Loader. The engine removal process involves disconnecting battery cables, draining fluids, removing mounted components, and using an overhead hoist to lift the engine from the machine. Installation is largely the reverse process. Radiator removal involves draining coolant and removing mounting hardware, while installation reconnects hoses and refills the cooling system.
New Holland W170B Wheel Loader Service Repair Manual.pdfhmc151121
This document provides instructions for removing the engine from a wheel loader. It outlines 24 steps, including draining fluids, disconnecting hoses and wiring, and removing mounting hardware. The engine and radiator are removed together. Lifting straps are used to safely raise the hood for improved access during removal.
New Holland W130C Tier 4 Wheel Loader Service Repair Manual.pdfhmc151121
This section describes the removal and installation procedures for the engine and radiator on a W130C wheel loader. The key steps for engine removal include disconnecting batteries, draining fluids, removing mounting brackets and hoses. Installation is the reverse of removal. Radiator removal involves disconnecting hoses and electrical connections, and removing mounting bolts. Installation is also the reverse of removal. Torque specifications are provided for critical fasteners.
New Holland W110C Tier 4 Wheel Loader Service Repair Manual.pdfhmc151121
This document is a service manual that provides instructions for removing the engine from a W110C Wheel Loader. It is a 12-step process that includes parking the machine, discharging pressure from hydraulic and brake systems, draining coolant and oil, disconnecting batteries, and using lifting straps to remove the engine. Safety precautions like loosening the hydraulic reservoir cap and putting the master disconnect in the off position are emphasized. The document provides detailed photos and descriptions to guide the removal process.
New Holland W80BTC Wheel Loader Service Repair Manual.pdfhmc151121
This repair manual provides technical information for engineers to service wheel loaders models W50BTC, W60BTC, W70BTC, and W80BTC. It consists of two volumes, one covering the wheel loaders and one covering the engine. The manual contains information on repair procedures, necessary tools, and service standards. It is intended as a reference for maintenance and repair work on the machines and engines. Safety instructions are provided to prevent accidents during repair work.
New Holland W80 Compact Wheel Loader Parts Catalogue Manual.pdfhmc151121
This document contains a section index and parts listings for various components of an agricultural machine. The section index lists parts categories including the frame, axles, wheels, prop shaft, tanks, ballast, motor/drivetrain parts, and more. Specific part numbers, descriptions, quantities and references to related part figures are provided for items such as the front frame with mounting parts, joint parts for the frame, and rear frame with mounting parts.
Nissan Forklift Electric 1B1 Series Service Repair Manual.pdfhmc151121
The document provides instructions for removing and installing a differential carrier. Key steps include draining the gear oil, removing the front wheels, brake components, and traction motor. The differential carrier is then removed from the axle housing or axle tubes are removed from the carrier. Installation involves cleaning mating surfaces, applying grease, and tightening bolts to the specified torques. Proper lifting techniques and plugging open lines are emphasized for safety.
Nissan Forklift A-frame - ATF Series Service Repair Manual.pdfhmc151121
The document is a service manual for the A-Ergo model of stand-on stacker trucks. It provides information on safety, technical specifications, dimensions, component details, and maintenance procedures. Key details include permitted lifting points, safety instructions for working on the truck, and specifications for components like the drive motor, gearbox, and hydraulic system. The manual is intended to enable quick and correct service of the A-Ergo truck models.
Nissan Forklift A-frame - ASN Series Service Repair Manual.pdfhmc151121
This document is the service manual for the A-Ergo model of stand-on stacker trucks made by ATLET. It provides information on the structure and contents of the manual, as well as safety instructions for working on the trucks. Technicians should take proper precautions such as locking out the mast, removing jewelry, and securing the truck before performing any service to avoid risk of injury. The manual also includes technical specifications and components of the A-Ergo trucks.
Nissan Forklift A-frame - AJN Series Service Repair Manual.pdfhmc151121
The document is a service manual for the A-Ergo model of stand-on stacker trucks. It provides information on safety, technical specifications, dimensions, component details, and maintenance procedures. Key details include permitted lifting points, safety instructions for working on the truck, and component specifications for items like the drive motor, gearbox, and hydraulic system. The manual is intended to enable quick and correct service of the A-Ergo truck models.
New Holland W300C Wheel Loader Service Repair Manual.pdfhmc151121
This document is a service manual for CNH Italia S.p.A. wheel loaders models W270C and W300C. It contains instructions and specifications for servicing and repairing components of the wheel loaders. The manual is divided into tabs covering general information, engines, fuel system, electrical systems, steering, powertrain, brakes, hydraulics, and mounted equipment. The document provided is the table of contents, which lists each section number and title. It does not contain any repair or service instructions.
New Holland W300C Tier 4 Wheel Loader Service Repair Manual.pdfhmc151121
This document is a service manual for a wheel loader that provides specifications and repair instructions. It contains sections on the engine, transmission, drivetrain, brakes, hydraulics, frames, steering, wheels, cab controls, electrical systems, attachments, and other components. Tables provide torque specifications for fasteners in decimal, metric, and hydraulic fitting sections.
New Holland W270C Wheel Loader Service Repair Manual.pdfhmc151121
This document is a service manual for CNH Italia S.p.A. wheel loaders models W270C and W300C. It contains instructions and specifications for servicing and repairing components of the wheel loaders. The manual is divided into tabs covering general information, engines, fuel system, electrical systems, steering, powertrain, brakes, hydraulics, and mounted equipment. The document provides an index of sections for each component system and instructions for tasks like removing and installing engines, radiators, transmissions, hydraulic pumps and more. Safety practices and torque specifications are also included.
New Holland W270C Tier 4 Wheel Loader Service Repair Manual.pdfhmc151121
This document is a service manual for a wheel loader that provides specifications and repair instructions. It contains sections on the engine, transmission, drivetrain, brakes, hydraulics, frames, steering, wheels, cab controls, electrical systems, attachments, and other components. Tables provide torque specifications for fasteners in decimal, metric, and hydraulic fitting sections.
New Holland W230C Wheel Loader Service Repair Manual.pdfhmc151121
This document provides instructions for removing the engine from a W230C Wheel Loader. It is a service manual section that outlines 16 steps for engine removal, including draining fluids, disconnecting wiring harnesses and hoses, removing mounting bolts, and lifting the engine out after the hood is raised. The overall process described provides the essential details to safely and properly remove the engine from the vehicle.
New Holland W230C Tier 4A (interim) Wheel Loader Service Repair Manual.pdfhmc151121
This service manual provides specifications and repair information for Tier 4A interim wheel loaders. It covers the engine, transmission, drivetrain, brakes, hydraulics, frames, steering, wheels, cab climate control, electrical systems, front loader, bucket, cab, and decals. The manual includes an introduction on safety rules, product identification, and general engine specifications for the W190C and W230C models.
New Holland W230C Tier 4 Wheel Loader Service Repair Manual.pdfhmc151121
This document provides instructions for removing the engine from a wheel loader. It involves marking components for reinstallation, draining fluids like coolant and oil, disconnecting batteries, and using lifting straps to remove the engine. Removal requires proper safety procedures and draining of hydraulic pressure before disconnecting hoses and electrical connections.
New Holland W190C Wheel Loader Service Repair Manual.pdfhmc151121
This section of the service manual provides instructions for removing and installing the engine and radiator on a W190C Wheel Loader. The engine removal process involves disconnecting battery cables, draining fluids, removing mounting brackets and the drive belt. Engine installation is the reverse of removal. Radiator removal involves draining coolant and disconnecting hoses, while installation reconnects all hoses and refills the coolant.
New Holland W190C Tier 4A (interim) Wheel Loader Service Repair Manual.pdfhmc151121
This service manual provides specifications and repair information for Tier 4A interim wheel loaders. It covers the engine, transmission, four-wheel drive system, front and rear axle systems, brakes, hydraulic systems, frames, steering, wheels, cab climate control, electrical systems, front loader, platform and safety features. The manual includes an introduction on safety procedures and product identification.
New Holland W190C Tier 4 Wheel Loader Service Repair Manual.pdfhmc151121
The document provides step-by-step instructions for removing the engine from a W190C Wheel Loader. Key steps include draining fluids, disconnecting wiring harnesses and hoses, removing the hood and mounting brackets, and then lifting the engine out of the machine. Specific components addressed include the radiator, air cleaner, muffler, belts, and hoses connecting the engine to other systems. Safety precautions are noted such as releasing pressure from hydraulic and cooling systems before disconnection.
New Holland W170C Wheel Loader Service Repair Manual.pdfhmc151121
This section provides instructions for removing and installing the engine and radiator on a W170C Wheel Loader. The engine removal process involves disconnecting battery cables, draining fluids, removing mounted components, and using an overhead hoist to lift the engine from the machine. Installation is largely the reverse process. Radiator removal involves draining coolant and removing mounting hardware, while installation reconnects hoses and refills the cooling system.
New Holland W170B Wheel Loader Service Repair Manual.pdfhmc151121
This document provides instructions for removing the engine from a wheel loader. It outlines 24 steps, including draining fluids, disconnecting hoses and wiring, and removing mounting hardware. The engine and radiator are removed together. Lifting straps are used to safely raise the hood for improved access during removal.
New Holland W130C Tier 4 Wheel Loader Service Repair Manual.pdfhmc151121
This section describes the removal and installation procedures for the engine and radiator on a W130C wheel loader. The key steps for engine removal include disconnecting batteries, draining fluids, removing mounting brackets and hoses. Installation is the reverse of removal. Radiator removal involves disconnecting hoses and electrical connections, and removing mounting bolts. Installation is also the reverse of removal. Torque specifications are provided for critical fasteners.
New Holland W110C Tier 4 Wheel Loader Service Repair Manual.pdfhmc151121
This document is a service manual that provides instructions for removing the engine from a W110C Wheel Loader. It is a 12-step process that includes parking the machine, discharging pressure from hydraulic and brake systems, draining coolant and oil, disconnecting batteries, and using lifting straps to remove the engine. Safety precautions like loosening the hydraulic reservoir cap and putting the master disconnect in the off position are emphasized. The document provides detailed photos and descriptions to guide the removal process.
New Holland W80BTC Wheel Loader Service Repair Manual.pdfhmc151121
This repair manual provides technical information for engineers to service wheel loaders models W50BTC, W60BTC, W70BTC, and W80BTC. It consists of two volumes, one covering the wheel loaders and one covering the engine. The manual contains information on repair procedures, necessary tools, and service standards. It is intended as a reference for maintenance and repair work on the machines and engines. Safety instructions are provided to prevent accidents during repair work.
New Holland W80 Compact Wheel Loader Parts Catalogue Manual.pdfhmc151121
This document contains a section index and parts listings for various components of an agricultural machine. The section index lists parts categories including the frame, axles, wheels, prop shaft, tanks, ballast, motor/drivetrain parts, and more. Specific part numbers, descriptions, quantities and references to related part figures are provided for items such as the front frame with mounting parts, joint parts for the frame, and rear frame with mounting parts.
Ever been troubled by the blinking sign and didn’t know what to do?
Here’s a handy guide to dashboard symbols so that you’ll never be confused again!
Save them for later and save the trouble!
Welcome to ASP Cranes, your trusted partner for crane solutions in Raipur, Chhattisgarh! With years of experience and a commitment to excellence, we offer a comprehensive range of crane services tailored to meet your lifting and material handling needs.
At ASP Cranes, we understand the importance of reliable and efficient crane operations in various industries, from construction and manufacturing to logistics and infrastructure development. That's why we strive to deliver top-notch solutions that enhance productivity, safety, and cost-effectiveness for our clients.
Our services include:
Crane Rental: Whether you need a crawler crane for heavy lifting or a hydraulic crane for versatile operations, we have a diverse fleet of well-maintained cranes available for rent. Our rental options are flexible and can be customized to suit your project requirements.
Crane Sales: Looking to invest in a crane for your business? We offer a wide selection of new and used cranes from leading manufacturers, ensuring you find the perfect equipment to match your needs and budget.
Crane Maintenance and Repair: To ensure optimal performance and safety, regular maintenance and timely repairs are essential for cranes. Our team of skilled technicians provides comprehensive maintenance and repair services to keep your equipment running smoothly and minimize downtime.
Crane Operator Training: Proper training is crucial for safe and efficient crane operation. We offer specialized training programs conducted by certified instructors to equip operators with the skills and knowledge they need to handle cranes effectively.
Custom Solutions: We understand that every project is unique, which is why we offer custom crane solutions tailored to your specific requirements. Whether you need modifications, attachments, or specialized equipment, we can design and implement solutions that meet your needs.
At ASP Cranes, customer satisfaction is our top priority. We are dedicated to delivering reliable, cost-effective, and innovative crane solutions that exceed expectations. Contact us today to learn more about our services and how we can support your project in Raipur, Chhattisgarh, and beyond. Let ASP Cranes be your trusted partner for all your crane needs!
Implementing ELDs or Electronic Logging Devices is slowly but surely becoming the norm in fleet management. Why? Well, integrating ELDs and associated connected vehicle solutions like fleet tracking devices lets businesses and their in-house fleet managers reap several benefits. Check out the post below to learn more.
The Octavia range embodies the design trend of the Škoda brand: a fusion of
aesthetics, safety and practicality. Whether you see the car as a whole or step
closer and explore its unique features, the Octavia range radiates with the
harmony of functionality and emotion
Fleet management these days is next to impossible without connected vehicle solutions. Why? Well, fleet trackers and accompanying connected vehicle management solutions tend to offer quite a few hard-to-ignore benefits to fleet managers and businesses alike. Let’s check them out!
What Could Be Behind Your Mercedes Sprinter's Power Loss on Uphill RoadsSprinter Gurus
Unlock the secrets behind your Mercedes Sprinter's uphill power loss with our comprehensive presentation. From fuel filter blockages to turbocharger troubles, we uncover the culprits and empower you to reclaim your vehicle's peak performance. Conquer every ascent with confidence and ensure a thrilling journey every time.
6. INTRODUCTION
Foreword
TC5000
IMPORTANT INFORMATION
All repair and maintenance works listed in this manual must be carried out only by staff belonging to the NEW HOL-
LAND Service network, strictly complying with the instructions given and using, whenever required, the special tools.
Anyone who carries out the above operations without complying with the prescriptions shall be responsible for the
subsequent damages.
The manufacturer and all the organizations of its distribution chain, including - without limitation - national, regional or
local dealers, reject any responsibility for damages due to the anomalous behavior of parts and/or components not
approved by the manufacturer himself, including those used for the servicing or repair of the product manufactured
or marketed by the Manufacturer. In any case, no warranty is given or attributed on the product manufactured or
marketed by the Manufacturer in case of damages due to an anomalous behavior of parts and/or components not
approved by the Manufacturer.
No reproduction, though partial of text and illustrations allowed
87734472B 05/05/2009
3
7. INTRODUCTION
Foreword
TC5000
Technical Information
This manual has been produced by a new technical information system. This new system is designed to deliver
technical information electronically through CD-ROM and in paper manuals. A coding system called ICE has been
developed to link the technical information to other Product Support functions e.g. Warranty.
Technical information is written to support the maintenance and service of the functions or systems on a customers
machine. When a customer has a concern on his machine it is usually because a function or system on his machine
is not working at all, is not working efficiently, or is not responding correctly to his commands. When you refer to the
technical information in this manual to resolve that customers concern, you will find all the information classified using
the new ICE coding, according to the functions or systems on that machine. Once you have located the technical
information for that function or system then you will find all the mechanical, electrical or hydraulic devices, compo-
nents, assemblies and sub assemblies for that function or system. You will also find all the types of information that
have been written for that function or system, the technical data (specifications), the functional data (how it works),
the diagnostic data (fault codes and troubleshooting) and the service data (remove, install adjust, etc.).
By integrating this new ICE coding into technical information , you will be able to search and retrieve just the right
piece of technical information you need to resolve that customers concern on his machine. This is made possible by
attaching 3 categories to each piece of technical information during the authoring process.
The first category is the Location, the second category is the Information Type and the third category is the Product:
• LOCATION - is the component or function on the machine, that the piece of technical information is going to
describe e.g. Fuel tank.
• INFORMATION TYPE - is the piece of technical information that has been written for a particular component or
function on the machine e.g. Capacity would be a type of Technical Data that would describe the amount of fuel
held by the Fuel tank.
• PRODUCT - is the model that the piece of technical information is written for.
Every piece of technical information will have those 3 categories attached to it. You will be able to use any combination
of those categories to find the right piece of technical information you need to resolve that customers concern on his
machine.
That information could be:
• the description of how to remove the cylinder head
• a table of specifications for a hydraulic pump
• a fault code
• a troubleshooting table
• a special tool
87734472B 05/05/2009
4
8. INTRODUCTION
How to Use this Manual
This manual is divided into Sections. Each Section is then divided into Chapters. Contents pages are included at the
beginning of the manual, then inside every Section and inside every Chapter. An alphabetical Index is included at the
end of a Chapter. Page number references are included for every piece of technical information listed in the Chapter
Contents or Chapter Index.
Each Chapter is divided into four Information types:
• Technical Data (specifications) for all the mechanical, electrical or hydraulic devices, components and, assemblies.
• Functional Data (how it works) for all the mechanical, electrical or hydraulic devices, components and assemblies.
• Diagnostic Data (fault codes, electrical and hydraulic troubleshooting) for all the mechanical, electrical or hydraulic
devices, components and assemblies.
• Service data (remove disassembly, assemble, install) for all the mechanical, electrical or hydraulic devices, com-
ponents and assemblies.
Sections
Sections are grouped according to the main functions or a systems on the machine. Each Section is identified by
a letter A, B, C etc. The amount of Sections included in the manual will depend on the type and function of the
machine that the manual is written for. Each Section has a Contents page listed in alphabetic/numeric order. This
table illustrates which Sections could be included in a manual for a particular product.
SECTION
A - Distribution Systems
B - Power Production
C - Power Train
D - Travelling
E - Body and Structure
F - Frame Positioning
G - Tool Positioning
H - Working Arm
J - Tools and Couplers
K - Crop Processing
L - Field Processing
PRODUCT
Tractors X X X X X X X X
Vehicles with working arms: backhoes,
excavators, skid steers, .....
X X X X X X X X X
Combines, forage harvesters, balers, .... X X X X X X X X X X
Seeding, planting, floating, spraying
equipment, ....
X X X X X X X X X
Mounted equipment and tools, ..... X X X X
87734472B 05/05/2009
5
9. INTRODUCTION
This manual contains these Sections. The contents of each Section are explained over the following pages.
Contents
INTRODUCTION
DISTRIBUTION SYSTEMS A
POWER PRODUCTION B
POWER TRAIN C
TRAVELLING D
BODY AND STRUCTURE E
TOOL POSITIONING G
CROP PROCESSING K
Section Contents
SECTION A, DISTRIBUTION SYSTEMS
This Section covers the main systems that interact with most of the functions of the product. It includes the central
parts of the hydraulic, electrical, electronic, pneumatic, lighting and grease lubrication systems. The components that
are dedicated to a specific function are listed in the Chapter where all the technical information for that function is
included.
SECTION B, POWER PRODUCTION
This Section covers all the functions related to the production of power to move the machine and to drive various
devices.
SECTION C, POWER TRAIN
This Section covers all the functions related to the transmission of power from the engine to the axles and to internal
or external devices and additional Process Drive functions.
SECTION D, TRAVELLING
This Section covers all the functions related to moving the machine, including tracks, wheels, steering and braking. It
covers all the axles both driven axles and non-driven axles, including any axle suspension.
SECTION E, BODY AND STRUCTURE
This Section covers all the main functions and systems related to the structure and body of the machine. Including
the frame, the shields, the operator’s cab and the platform.
SECTION G, TOOL POSITIONING
This Section covers all the functions related to the final and/or automatic positioning of the tool once the tool is posi-
tioned using the Working Arm or the machine frame.
SECTION K, CROP PROCESSING
This Section covers all the functions related to crop processing.
87734472B 05/05/2009
6
11. DISTRIBUTION SYSTEMS - PRIMARY HYDRAULIC POWER SYSTEM
PRIMARY HYDRAULIC POWER SYSTEM - Torque
TC5000
Union nuts
55009 1
Ferrules
The ferrule must be pre-assembled on the tube. Tighten the union nut as specified in the table below. The ferrule and
screw thread are greased.
Torque Nm (lb.ft)
Tube outer diameter mm (inch)
Minimum Maximum
8 (0.32) 15 (11) 20 (15)
10 (0.4) 25 (18) 30 (22)
12 (0.47) 35 (26) 40 (29)
16 (0.63) 50 (37) 55 (40)
18 (0.71) 60 (44) 70 (51)
22 (0.87) 100 (74) 110 (81)
28 (1.10) 110 (81) 120 (88)
Metric fittings
Unions
Are suitable for use with union nuts and ferrules and ball-type nipples.
55011 2
87734472B 05/05/2009
A.10.A / 4
12. DISTRIBUTION SYSTEMS - PRIMARY HYDRAULIC POWER SYSTEM
Connections
Are screwed in ISO metric thread - tolerance class 6H - with a tightening torque as specified in the table below.
55012 3
Torque Nm (lb.ft)
Tube outer diameter mm (inch)
Minimum Maximum
8 (0,32) 40 (29) 45 (33)
10 (0,40) 65 (48) 70 (51)
12 (0,47) 80 (59) 85 (63)
16 (0,63) 100 (74) 120 (88)
18 (0,71) 120 (88) 140 (103)
22 (0,87) 200 (147) 220 (164)
28 (1,10) 350 (257) 380 (280)
Swivel nut with ball-type nipple
Are suitable for use with female unions
55013 4
D1 Torque Nm (lb.ft)
6H Minimum Maximum
M14 x 1.5 - -
M16 x 1.5 15 (11) 20 (15)
M18 x 1.5 20 (15) 25 (18)
M24 x 1.5 30 (22) 35 (26)
M26 x 1.5 - -
M30 x 2 - -
M36 x 2 - -
87734472B 05/05/2009
A.10.A / 5
13. DISTRIBUTION SYSTEMS - PRIMARY HYDRAULIC POWER SYSTEM
Hydraulic pump - General specification
TC5000
The hydraulic system is equipped with two pumps for
models without lateral flotation, and with three pumps for
models with lateral flotation.
RNIL08TC0014F0C 1
Main hydraulic pump (2)
Type Silence gear type
Direction of rotation Right -hand rotation
Maximum pressure 280 bar ( 4061 psi)
Maximum speed 3000 rpm
Output per revolution 16 cc/rev.
Maximum oil flow 48 l/min ( 10.5 gal/min)
Hydraulic pump (steering circuit) (3)
Type Silence gear type
Direction of rotation Right-hand rotation
Maximum pressure 280 bar ( 4061 psi)
Maximum speed 3000 rpm
Output per revolution 5.5 cc/rev.
Maximum oil flow 16.5 l/min ( 3.6 gal/min)
Hydraulic pump (lateral flotation circuit) (4)
Type: Gear type
Direction of rotation Right-hand rotation
Maximum pressure 230 bar ( 3336 psi)
Maximum speed 3000 rpm
Output per revolution 2 cc/rev.
Maximum oil flow 6 l/min ( 1.3 gal/min)
87734472B 05/05/2009
A.10.A / 6
14. DISTRIBUTION SYSTEMS - PRIMARY HYDRAULIC POWER SYSTEM
PRIMARY HYDRAULIC POWER SYSTEM - Overview
TC5000
RNIL08TC004G0B 1
87734472B 05/05/2009
A.10.A / 16
15. DISTRIBUTION SYSTEMS - PRIMARY HYDRAULIC POWER SYSTEM
RNIL08TC003G0B 2
87734472B 05/05/2009
A.10.A / 17
16. DISTRIBUTION SYSTEMS - PRIMARY HYDRAULIC POWER SYSTEM
PRIMARY HYDRAULIC POWER SYSTEM - Component localisation
TC5000
NOTE: To find the location of those components, refer to PRIMARY HYDRAULIC POWER SYSTEM - Overview
(A.10.A).
For units without lateral flotation:
Main hydraulic pump (2), steering circuit pump (3).
ZEIL08TC0006A0B 1
For units with lateral flotation (optional):
Main hydraulic pump (2), steering circuit pump (3), lateral
flotation pump (4).
ZEIL08TC0033A0C 2
Oil tank (5), filler cap with filter (6), breather with filter and
non−return valve (33), low pressure filter (32).
ZEIL08TC0004A0B 3
87734472B 05/05/2009
A.10.A / 18
17. DISTRIBUTION SYSTEMS - PRIMARY HYDRAULIC POWER SYSTEM
Valve stack
Hydrostatic drive unit without lateral flota-
tion:
Header height control valve (8), pilot valve (42), unloading
tube valve (13), reel vertical adjustment valve (15), reel
horizontal adjustment valve (17).
RNIL08TC0128A0A 4
Hydrostatic drive with lateral flotation:
Header height control valve (8), pilot valve (42), unload-
ing tube control valve (13), reel vertical adjustment valve
(15), reel horizontal adjustment valve (17), lateral flotation
control valve (28), load sensing valve (27).
RNIL08TC0127A0A 5
Mechanical drive unit without lateral flota-
tion:
Header height control valve (8), pilot valve (42), unloading
tube valve (13), reel vertical adjustment valve (15), reel
horizontal adjustment valve (17), drive variator valve (47).
ZEIL08TC0297A0B 6
Header lift cylinders (9).
ZEIL08TC0010A0B 7
87734472B 05/05/2009
A.10.A / 19
18. DISTRIBUTION SYSTEMS - PRIMARY HYDRAULIC POWER SYSTEM
Accumulator control valve (10), header suspension accu-
mulator (11), pressure sensor (12).
ZEIL08TC0005A0A 8
Unload tube cylinder (14).
ZEIL08TC0003A0B 9
Header quick release coupler (18) (or screw couplers).
ZEIL08TC0001A0B 10
Steering valve (24).
ZEIL08TC0002A0B 11
87734472B 05/05/2009
A.10.A / 20
19. DISTRIBUTION SYSTEMS - PRIMARY HYDRAULIC POWER SYSTEM
Steering cylinder(s) (25).
ZEIL08TC0011A0B 12
Lateral float cylinder (29) (optional).
ZEIL08TC0018A0B 13
Drain hose (31).
ZEIL08TC0008A0B 14
Rotary union (34), straw chopper clutch (35).
ZEIL08TC0012A0B 15
87734472B 05/05/2009
A.10.A / 21
20. DISTRIBUTION SYSTEMS - PRIMARY HYDRAULIC POWER SYSTEM
Header engaging cylinder (37).
ZEIL08TC0298A0B 16
Hydraulic remote control valves:
Straw elevator and header engaging control valve (38),
threshing engaging control valve (39), unloading engag-
ing control valve (40).
ZEIL08TC0032A0B 17
Unloading engaging cylinder (41), threshing engagement
cylinder (46).
ZEIL08TC0299A0B 18
Lateral float accumulator ( 120 bar (1740.0 psi)) (43),
lateral float accumulator ( 85 bar (1232.5 psi)) (44) (op-
tional).
ZEIL08TC0019A0B 19
87734472B 05/05/2009
A.10.A / 22
21. DISTRIBUTION SYSTEMS - PRIMARY HYDRAULIC POWER SYSTEM
Straw chopper clutch valve (45).
ZEIL08TC0300A0B 20
87734472B 05/05/2009
A.10.A / 23
22. DISTRIBUTION SYSTEMS - PRIMARY HYDRAULIC POWER SYSTEM
Stack valve - Dynamic description
TC5000
If all valves are in the "0" position, then:
The valves (13), (15), (17) and (47), (Refer to Stack valve - Static description (A.10.A)) are closed, which means
that the oil can not flow through these valves.
The pressure raises at (7b), (27b), (Refer to Remote valve - Hydraulic schema (A.10.A)), until the load sensing
spool is pushed open against spring pressure (delta P= 3 bar (43.5 psi)) and the return pressure in the pilot line (7a),
(27a). Now pump oil flows into the return line at standby pressure.
When activating the lateral float control spools (optional), the hydraulic cylinder pressure (pump pressure measured
after the spool restriction) is present in the pilot line (7a), (27a) and closes the load sensing spool. The oil pressure is
available for the activated control spool(s).
When the pump pressure reaches the cylinder pressure (+ 3 bar (43.500 psi)), the load sensing spool is pushed
open. The necessary amount of oil will flow to the control spool at the needed pressure. Excess oil is dumped into the
return line. When activating valves without direct load sensing, (13), (15) and (17), the pilot valve (42) is activated to
connect the pressure line with the load sensing line. This closes the load spooling line. Because the pilot valve (42)
connects the pressure line directly with the load sensing line, the pressure rises up to relief pressure. Then the relief
valve is pushed open and system pressure is limited to 210 bar (3045.0 psi) ( 207+3 bar). The load sense shuttle
valve ensures the pilot pressure cannot escape into the return line.
ZEIL08TC0297A0B 1
Operation of the reel vertical adjustment valve (15)
When switching the valve, the pilot valve (42) (refer to Hydraulic schema − Models with lateral flotation and Hydraulic
schema − Models without lateral flotation − A.10.A) is activated as well to connect the pressure line with the load
sensing line and closes the load sensing spool. Full oil flow is available towards the hydraulic cylinder. Only the
lockout valve is provided in the connection towards the cylinder.
87734472B 05/05/2009
A.10.A / 29
23. Thank you very much for
your reading. Please Click
Here. Then Get COMPLETE
MANUAL. NO WAITING
NOTE:
If there is no response to
click on the link above,
please download the PDF
document first and then
click on it.
24. DISTRIBUTION SYSTEMS - PRIMARY HYDRAULIC POWER SYSTEM
Operation of the unloading tube valve (13) and the reel horizontal adjustment valve (17)
When switching one of these valves, the pilot valve is activated as well to connect the pressure line with the load
sensing line and close the load sensing spool. Full oil flow is available towards the hydraulic cylinder.
Lockout valves are installed in the connections towards the cylinder.
ZEIL08TC0297A0B 2
87734472B 05/05/2009
A.10.A / 30
25. DISTRIBUTION SYSTEMS - PRIMARY HYDRAULIC POWER SYSTEM
Stack valve - Static description
TC5000
See also the hydraulic schemes.
The main hydraulic system will be an open centre load sensing system that controls all high pressure functions of the
header and unloading auger swing.
The hydraulic system contains one main stack valve.
ZEIL08TC0297A0B 1
The stack valve consists of:
• Control valves for oil supply and load sensing. Refer to PRIMARY HYDRAULIC POWER SYSTEM - Hydraulic
schema (A.10.A).
Load sensing is a system which avoids high pressure when the valves are in neutral position and consequently,
less heating up of oil and creating load-independent flow rate control.
• Control valves with load sensing and optional lateral flotation valve - not shown.
• Control valves which need the activation through the pilot valve (42), (13), (15), (17).
87734472B 05/05/2009
A.10.A / 31
26. DISTRIBUTION SYSTEMS - PRIMARY HYDRAULIC POWER SYSTEM
Hydraulic pump - Exploded view
TC5000
RNIL08TC0017F0B 1
1. Pump housing 10. Bushing
2. Housing cover 11. Straight pin
3. Bearing end plate 12. Protective cap
4. Radial-lip-type oil seal 13. Protective cap
5. Retaining ring 14. Screw
6. Spring lock washer 15. Radial-lip-type of seal
7. Hexagon nut 16. Toothed washer
8. Set of seals 17. Toothed gear
9. Bushing 18. Toothed gear
NOTE: Tighten the screw (5) with a torque of 12 - 16 Nm ( 9 - 12 lb ft).
87734472B 05/05/2009
A.10.A / 32
27. DISTRIBUTION SYSTEMS - PRIMARY HYDRAULIC POWER SYSTEM
Filter - Static description
TC5040, TC5050, TC5060, TC5070, TC5080
The low pressure filter (32) are installed on top of the hy-
draulic tank (5) and has a bypass (non-return) valve set
to 1.15 bar ( 17 psi). The return oil from the hydraulics
system is flowing through the low pressure filter before
entering the hydraulic oil tank.
ZEIL08TC0004A0B 1
87734472B 05/05/2009
A.10.A / 33
28. DISTRIBUTION SYSTEMS - PRIMARY HYDRAULIC POWER SYSTEM
Filter - Static description
TC5080 Hillside
The low pressure filters (32) are installed on top of the
hydraulic tank (5) and has a bypass (non-return) valve set
to 1.15 bar ( 17 psi).
The return oil from the hydraulics system is flowing
through the low pressure filter before entering the hy-
draulic oil tank.
ZEIL08TC0004A0B 1
87734472B 05/05/2009
A.10.A / 34