5 Warning Signs Your BMW's Intelligent Battery Sensor Needs AttentionBertini's German Motors
IBS monitors and manages your BMW’s battery performance. If it malfunctions, you will have to deal with an array of electrical issues in your vehicle. Recognize warning signs like dimming headlights, frequent battery replacements, and electrical malfunctions to address potential IBS issues promptly.
Comprehensive program for Agricultural Finance, the Automotive Sector, and Empowerment . We will define the full scope and provide a detailed two-week plan for identifying strategic partners in each area within Limpopo, including target areas.:
1. Agricultural : Supporting Primary and Secondary Agriculture
• Scope: Provide support solutions to enhance agricultural productivity and sustainability.
• Target Areas: Polokwane, Tzaneen, Thohoyandou, Makhado, and Giyani.
2. Automotive Sector: Partnerships with Mechanics and Panel Beater Shops
• Scope: Develop collaborations with automotive service providers to improve service quality and business operations.
• Target Areas: Polokwane, Lephalale, Mokopane, Phalaborwa, and Bela-Bela.
3. Empowerment : Focusing on Women Empowerment
• Scope: Provide business support support and training to women-owned businesses, promoting economic inclusion.
• Target Areas: Polokwane, Thohoyandou, Musina, Burgersfort, and Louis Trichardt.
We will also prioritize Industrial Economic Zone areas and their priorities.
Sign up on https://profilesmes.online/welcome/
To be eligible:
1. You must have a registered business and operate in Limpopo
2. Generate revenue
3. Sectors : Agriculture ( primary and secondary) and Automative
Women and Youth are encouraged to apply even if you don't fall in those sectors.
Ever been troubled by the blinking sign and didn’t know what to do?
Here’s a handy guide to dashboard symbols so that you’ll never be confused again!
Save them for later and save the trouble!
Fleet management these days is next to impossible without connected vehicle solutions. Why? Well, fleet trackers and accompanying connected vehicle management solutions tend to offer quite a few hard-to-ignore benefits to fleet managers and businesses alike. Let’s check them out!
The Octavia range embodies the design trend of the Škoda brand: a fusion of
aesthetics, safety and practicality. Whether you see the car as a whole or step
closer and explore its unique features, the Octavia range radiates with the
harmony of functionality and emotion
𝘼𝙣𝙩𝙞𝙦𝙪𝙚 𝙋𝙡𝙖𝙨𝙩𝙞𝙘 𝙏𝙧𝙖𝙙𝙚𝙧𝙨 𝙞𝙨 𝙫𝙚𝙧𝙮 𝙛𝙖𝙢𝙤𝙪𝙨 𝙛𝙤𝙧 𝙢𝙖𝙣𝙪𝙛𝙖𝙘𝙩𝙪𝙧𝙞𝙣𝙜 𝙩𝙝𝙚𝙞𝙧 𝙥𝙧𝙤𝙙𝙪𝙘𝙩𝙨. 𝙒𝙚 𝙝𝙖𝙫𝙚 𝙖𝙡𝙡 𝙩𝙝𝙚 𝙥𝙡𝙖𝙨𝙩𝙞𝙘 𝙜𝙧𝙖𝙣𝙪𝙡𝙚𝙨 𝙪𝙨𝙚𝙙 𝙞𝙣 𝙖𝙪𝙩𝙤𝙢𝙤𝙩𝙞𝙫𝙚 𝙖𝙣𝙙 𝙖𝙪𝙩𝙤 𝙥𝙖𝙧𝙩𝙨 𝙖𝙣𝙙 𝙖𝙡𝙡 𝙩𝙝𝙚 𝙛𝙖𝙢𝙤𝙪𝙨 𝙘𝙤𝙢𝙥𝙖𝙣𝙞𝙚𝙨 𝙗𝙪𝙮 𝙩𝙝𝙚 𝙜𝙧𝙖𝙣𝙪𝙡𝙚𝙨 𝙛𝙧𝙤𝙢 𝙪𝙨.
Over the 10 years, we have gained a strong foothold in the market due to our range's high quality, competitive prices, and time-lined delivery schedules.
"Trans Failsafe Prog" on your BMW X5 indicates potential transmission issues requiring immediate action. This safety feature activates in response to abnormalities like low fluid levels, leaks, faulty sensors, electrical or mechanical failures, and overheating.
Symptoms like intermittent starting and key recognition errors signal potential problems with your Mercedes’ EIS. Use diagnostic steps like error code checks and spare key tests. Professional diagnosis and solutions like EIS replacement ensure safe driving. Consult a qualified technician for accurate diagnosis and repair.
What Could Cause The Headlights On Your Porsche 911 To Stop WorkingLancer Service
Discover why your Porsche 911 headlights might flicker out unexpectedly. From aging bulbs to electrical gremlins and moisture mishaps, we're delving into the reasons behind the blackout. Stay tuned to illuminate the road ahead and ensure your lights shine bright for safer journeys.
In this presentation, we have discussed a very important feature of BMW X5 cars… the Comfort Access. Things that can significantly limit its functionality. And things that you can try to restore the functionality of such a convenient feature of your vehicle.
Things to remember while upgrading the brakes of your carjennifermiller8137
Upgrading the brakes of your car? Keep these things in mind before doing so. Additionally, start using an OBD 2 GPS tracker so that you never miss a vehicle maintenance appointment. On top of this, a car GPS tracker will also let you master good driving habits that will let you increase the operational life of your car’s brakes.
3. Link Product / Engine
Product Market Product Engine
9090X Olive TIER 3 Australia New Zealand F4HE9687
9090X Side Conveyor TIER 3 Australia New Zealand F4HE9687
9090X TIER 3 Australia New Zealand F4HE9687
9090X Olive Side Conveyor TIER 3 Australia New Zealand F4HE9687
51697772 08/01/2020
4. Contents
INTRODUCTION
Engine....................................................................................... 10
[10.001] Engine and crankcase ............................................................. 10.1
[10.216] Fuel tanks .......................................................................... 10.2
[10.206] Fuel filters .......................................................................... 10.3
[10.218] Fuel injection system............................................................... 10.4
[10.202] Air cleaners and lines .............................................................. 10.5
[10.254] Intake and exhaust manifolds and muffler ......................................... 10.6
[10.400] Engine cooling system ............................................................. 10.7
[10.414] Fan and drive ...................................................................... 10.8
[10.310] Aftercooler.......................................................................... 10.9
[10.304] Engine lubrication system........................................................ 10.10
Hydrostatic drive......................................................................... 29
[29.204] Reservoir, cooler, and lines ........................................................ 29.1
[29.218] Pump and motor components...................................................... 29.2
[29.202] Hydrostatic transmission ........................................................... 29.3
Brakes and controls .................................................................... 33
[33.202] Hydraulic service brakes ........................................................... 33.1
Hydraulic systems....................................................................... 35
[35.000] Hydraulic systems.................................................................. 35.1
[35.300] Reservoir, cooler, and filters........................................................ 35.2
[35.104] Fixed displacement pump.......................................................... 35.3
[35.106] Variable displacement pump ....................................................... 35.4
[35.204] Remote control valves ............................................................. 35.5
[35.610] Machine leveling control system ................................................... 35.6
[35.946] Frame positioning lifting............................................................ 35.7
51697772 08/01/2020
5. [35.948] Frame positioning extending ....................................................... 35.8
[35.903] Shaking hydraulic system .......................................................... 35.9
[35.904] Cleaning hydraulic system ....................................................... 35.10
[35.902] Harvesting hopper hydraulic system ............................................. 35.11
[35.706] Fruit repartition system........................................................... 35.12
[35.310] Distributor and lines .............................................................. 35.13
Frames and ballasting ................................................................. 39
[39.100] Frame .............................................................................. 39.1
[39.110] Drawbar and hitch assembly ....................................................... 39.2
Steering..................................................................................... 41
[41.101] Steering control .................................................................... 41.1
Wheels...................................................................................... 44
[44.511] Front wheels........................................................................ 44.1
[44.520] Rear wheels........................................................................ 44.2
[44.000] Wheels ............................................................................. 44.3
Cab climate control ..................................................................... 50
[50.200] Air conditioning..................................................................... 50.1
[50.300] Cab pressurizing system ........................................................... 50.2
Electrical systems....................................................................... 55
[55.000] Electrical system ................................................................... 55.1
[55.100] Harnesses and connectors......................................................... 55.2
[55.101] Chassis harness ................................................................... 55.3
[55.988] Selective Catalytic Reduction (SCR) electrical system ............................ 55.4
[55.640] Electronic modules ................................................................. 55.5
[55.019] Hydrostatic drive control system ................................................... 55.6
[55.512] Cab controls........................................................................ 55.7
[55.924] Cab fruit harvesting controls ....................................................... 55.8
[55.408] Warning indicators, alarms, and instruments ...................................... 55.9
51697772 08/01/2020
8. INTRODUCTION
Foreword - Important notice regarding equipment servicing
All repair and maintenance work listed in this manual must be carried out only by qualified dealership personnel,
strictly complying with the instructions given, and using, whenever possible, the special tools.
Anyone who performs repair and maintenance operations without complying with the procedures provided herein
shall be responsible for any subsequent damages.
The manufacturer and all the organizations of its distribution chain, including - without limitation - national, regional, or
local dealers, reject any responsibility for damages caused by parts and/or components not approved by the manu-
facturer, including those used for the servicing or repair of the product manufactured or marketed by the manufacturer.
In any case, no warranty is given or attributed on the product manufactured or marketed by the manufacturer in case
of damages caused by parts and/or components not approved by the manufacturer.
The manufacturer reserves the right to make improvements in design and changes in specifications at any time without
notice and without incurring any obligation to install them on units previously sold. Specifications, descriptions, and
illustrative material herein are as accurate as known at time of publication but are subject to change without notice.
In case of questions, refer to your NEW HOLLAND Sales and Service Networks.
51697772 08/01/2020
4
9. INTRODUCTION
Safety rules
Personal safety
This is the safety alert symbol. It is used to alert you to potential personal injury hazards. Obey all
safety messages that follow this symbol to avoid possible death or injury.
Throughout this manual you will find the signal words DANGER, WARNING, and CAUTION followed by special in-
structions. These precautions are intended for the personal safety of you and those working with you.
Read and understand all the safety messages in this manual before you operate or service the machine.
DANGER indicates a hazardous situation that, if not avoided, will result in death or serious injury.
WARNING indicates a hazardous situation that, if not avoided, could result in death or serious injury.
CAUTION indicates a hazardous situation that, if not avoided, could result in minor or moderate injury.
FAILURE TO FOLLOW DANGER, WARNING, AND CAUTION MESSAGES COULD RESULT
IN DEATH OR SERIOUS INJURY.
Machine safety
NOTICE: Notice indicates a situation that, if not avoided, could result in machine or property damage.
Throughout this manual you will find the signal word Notice followed by special instructions to prevent machine or
property damage. The word Notice is used to address practices not related to personal safety.
Information
NOTE: Note indicates additional information that clarifies steps, procedures, or other information in this manual.
Throughout this manual you will find the word Note followed by additional information about a step, procedure, or
other information in the manual. The word Note is not intended to address personal safety or property damage.
51697772 08/01/2020
8
10. INTRODUCTION
Safety rules - Ecology and the environment
Soil, air, and water quality is important for all industries and life in general. When legislation does not yet rule the
treatment of some of the substances that advanced technology requires, sound judgment should govern the use and
disposal of products of a chemical and petrochemical nature.
Familiarize yourself with the relative legislation applicable to your country, and make sure that you understand this
legislation. Where no legislation exists, obtain information from suppliers of oils, filters, batteries, fuels, anti-freeze,
cleaning agents, etc., with regard to the effect of these substances on man and nature and how to safely store, use,
and dispose of these substances.
Helpful hints
• Avoid the use of cans or other inappropriate pressurized fuel delivery systems to fill tanks. Such delivery systems
may cause considerable spillage.
• In general, avoid skin contact with all fuels, oils, acids, solvents, etc. Most of these products contain substances
that may be harmful to your health.
• Modern oils contain additives. Do not burn contaminated fuels and or waste oils in ordinary heating systems.
• Avoid spillage when you drain fluids such as used engine coolant mixtures, engine oil, hydraulic fluid, brake fluid,
etc. Do not mix drained brake fluids or fuels with lubricants. Store all drained fluids safely until you can dispose of
the fluids in a proper way that complies with all local legislation and available resources.
• Do not allow coolant mixtures to get into the soil. Collect and dispose of coolant mixtures properly.
• The air-conditioning system contains gases that should not be released into the atmosphere. Consult an air-condi-
tioning specialist or use a special extractor to recharge the system properly.
• Repair any leaks or defects in the engine cooling system or hydraulic system immediately.
• Do not increase the pressure in a pressurized circuit as this may lead to a component failure.
• Protect hoses during welding. Penetrating weld splatter may burn a hole or weaken hoses, allowing the loss of oils,
coolant, etc.
Battery recycling
Batteries and electric accumulators contain several substances that can have a harmful
effect on the environment if the batteries are not properly recycled after use. Improper
disposal of batteries can contaminate the soil, groundwater, and waterways. NEW
HOLLAND strongly recommends that you return all used batteries to a NEW HOLLAND
dealer, who will dispose of the used batteries or recycle the used batteries properly. In
some countries, this is a legal requirement.
Mandatory battery recycling
NOTE: The following requirements are mandatory in Brazil.
Batteries are made of lead plates and a sulfuric acid solution. Because batteries contain heavy metals such as lead,
CONAMA Resolution 401/2008 requires you to return all used batteries to the battery dealer when you replace any
batteries. Do not dispose of batteries in your household garbage.
Points of sale are obliged to:
• Accept the return of your used batteries
• Store the returned batteries in a suitable location
• Send the returned batteries to the battery manufacturer for recycling
51697772 08/01/2020
9
11. INTRODUCTION
Safety rules
PRECAUTIONARY STATEMENTS
Personal Safety
This is the safety alert symbol. It is used to alert you to potential personal injury hazards. Obey all
safety messages that follow this symbol to avoid possible injury or death.
Throughout this manual , you will find the signal words DANGER, WARNING, and CAUTION followed by special
instructions. These precautions are intended for the personal safety of you and those working with you.
Read and understand all the safety messages in this manual before you operate or service the machine.
CAUTION, used with the safety alert symbol, indicates a hazardous situation which, if not avoided, could result
in minor or moderate injury. The color associated with CAUTION is YELLOW.
FAILURE TO FOLLOW DANGER, WARNING, AND CAUTION MESSAGES COULD RESULT
IN DEATH OR SERIOUS INJURY.
NOTICE: Install new decals if the old decals are destroyed, lost painted over or cannot be read. When parts are
replaced that have decals make sure you install a new decal with each new part.
MACHINE SAFETY
NOTICE: Notice indicates a situation which, if not avoided, could result in machine or property damage.
Throughout this manual you will find the signal word Notice followed by special instructions to prevent machine or
property damage. The word Notice is used to address practices not related to personal safety.
INFORMATION
NOTE: Note indicates additional information which clarifies steps, procedures, or other information in this manual.
Throughout this manual you will find the word Note followed by additional information about a step, procedure, or
other information in the manual. The word Note is not intended to address personal safety or property damage.
ACCIDENT PREVENTION
WARNING
Avoid injury! Always do the following before lubricating, maintaining, or servicing the machine.
1. Disengage all drives.
2. Engage parking brake.
3. Lower all attachments to the ground, or raise and engage all safety locks.
4. Shut off engine.
5. Remove key from key switch.
6. Switch off battery key, if installed.
7. Wait for all machine movement to stop.
Failure to comply could result in death or serious injury.
W0047A
51697772 08/01/2020
10
12. INTRODUCTION
Most accidents or injuries that occur in workshops are the result of non compliance to simple and fundamental safety
principles. For this reason, IN MOST CASES THESE ACCIDENTS CAN BE AVOIDED by applying the fundamental
safety principles, acting with the necessary caution and care.
Accidents may occur with all types of machine, regardless of how well the machine in question was designed and
built.
SAFETY REQUIREMENTS FOR FLUID POWER SYSTEMS AND COMPONENTS - HY-
DRAULICS (EUROPEAN STANDARD EN982)
• Flexible hose assemblies must not be constructed from hoses which have been previously used as part of a hose
assembly.
• Do not weld hydraulic pipes: when flexible hoses or piping are damaged, replace them immediately.
• It is forbidden to modify a hydraulic accumulator by machining, welding or any other way.
• Before removing hydraulic accumulators for servicing, the liquid pressure in the accumulators must be reduced to
zero.
• Pressure check on hydraulic accumulators must be carried out by a method recommended by the accumulator
manufacturer.
• Take care not to exceed the maximum allowed pressure of the accumulator. After any check or adjustment, check
for leakages or gas in the hoses or pipes.
SAFETY RULES
General guidelines
• Carefully follow specified repair and maintenance procedures.
• When appropriate, use P.P.E (Personal Protective Equipment)
• Do not wear rings, wristwatches, jewellery, unbuttoned or loose articles of clothing such as: ties, torn clothing,
scarves, open jackets or shirts with open zips that may remain entangled in moving parts. It is advised to wear
approved safety clothing, e.g.: non-slip footwear, gloves, safety goggles, helmets, etc.
• Do not carry out repair operations with someone sitting in the driver's seat, unless the person is a trained technician
who is assisting with the operation in question.
• Do not operate the machine or use any of the implements from different positions, other than the driver's seat.
• Do not carry out operations on the machine with the engine running, unless specifically indicated.
• Bring all hydraulic cylinders to the home positions (down, retracted, etc.) before engine shut down.
• Stop the engine and check that the hydraulic circuits are pressure-free before removing caps, covers, valves, etc.
• All repair and maintenance operations must be carried out using extreme care and attention.
• Service steps and platforms used in the workshop or elsewhere should be built according to the applicable stan-
dards and legislation.
• Disconnect the power take off (p.t.o). and label the controls to indicate that the machine is being serviced. Any
parts that are to be raises must be locked in position.
• Brakes are inoperative when manually released for repair or maintenance purposes. Use blocks or similar devices
to secure the machine in these conditions.
• Only use specified towing points for towing the machine. Connect parts carefully. Make sure that all pins and/or
locks are secured in position before applying traction. Never remain near the towing bars, cables or chains that are
operating under load.
• When loading or unloading the machine from the trailer (or other means of transport), select a flat area capable of
sustaining the trailer or truck wheels. Firmly secure the machine to the truck or trailer and lock the wheels in the
position used by the carrier.
• Electric heaters, battery-chargers and similar equipment must only be powered by auxiliary power supplies with
efficient ground insulation to avoid electrical shock hazards.
• Always use suitable hoisting or lifting devices when raising or moving heavy parts.
51697772 08/01/2020
11
14. Engine - Fuel tanks
Fuel tanks - Detailed view - Fuel System
The fuel tank is on the left-hand side of the machine.
The tank capacity is 270.0 L (71.3 US gal). The fuel tank has a fuel gauge.
An anti-theft cap is available in a kit.
COIL18GR00734UA 1
1 Fuel return
2 Manual priming pump
3 Pre-filter + water separator
4 Fuel Gauge
5 Tank
51697772 08/01/2020
10.2 [10.216] / 3
15. Engine - Fuel tanks
COIL18GR01096TA 2
1 Tank
2 Filler cap
The fuel gauge
The gauge comprises three tubes: a suction tube, a return tube, and a third tube with a float that contains a magnet,
which indicates the fuel level.
The gauge also contains a resistor with values that vary based on the amount of fuel.
To check the operation of the sensor (stuck float), add fuel and observe whether the value of the resistor changes.
51697772 08/01/2020
10.2 [10.216] / 4
17. Engine - Fuel tanks
4 Spring
Voltage Effective volume Alarm Level indicated on the
IntelliView™ IV
1,57 V 0.0 L (0.0 US gal) Alarm 1102 0%
1,52 V 20.0 L (5.3 US gal) Alarm 1102 0%
1,47 V 28.3 L (7.5 US gal) Alarm 1102 0%
1,44 V 34.0 L (9.0 US gal) 2%
1,41 V 39.0 L (10.3 US gal) 4%
1,38 V 43.6 L (11.5 US gal) 6%
1,35 V 48.3 L (12.8 US gal) 8%
1,32 V 52.9 L (14.0 US gal) 10%
1,29 V 58.0 L (15.3 US gal) 12%
1,26 V 62.8 L (16.6 US gal) 14%
1,23 V 68.3 L (18.0 US gal) 17%
1,15 V 82.8 L (21.9 US gal) 23%
1,07 V 98.6 L (26.0 US gal) 29%
0,99 V 113.0 L (29.9 US gal) 35%
0,91 V 131.5 L (34.7 US gal) 43%
0,82 V 146.2 L (38.6 US gal) 49%
0,74 V 150.7 L (39.8 US gal) 51%
0,66 V 170.2 L (45.0 US gal) 59%
0,57 V 189.6 L (50.1 US gal) 67%
0,50 V 213.0 L (56.3 US gal) 76%
0,43 V 237.0 L (62.6 US gal) 86%
0,35 V 251.7 L (66.5 US gal) 92%
0,27 V 264.9 L (70.0 US gal) 98%
0,22 V 270.0 L (71.3 US gal) 100%
The circuit and the fuel filter
The fuel is drawn in at the base of the tank. It is initially filtered by the diesel pre-filter on the left-hand side of the
machine under the cab. The prefilter is also the water separator. It has a water-in-fuel sensor (if water is present =
0 V and if no water is present = 12 V) and a hand pump to prime the fuel supply.
The fuel then travels to the right-hand side of the machine. It is filtered again by the main diesel filter. The fuel then
passes into the ECU to be cooled. Finally, the fuel flows under pressure to the injectors for the engine.
51697772 08/01/2020
10.2 [10.216] / 6
19. Engine - Fuel tanks
4 Pre-filter + water separator
5 High-pressure pump
6 Fuel filter
7 Fuel gauge
8 Tank
COIL16GR00709TA 7
1 Power supply
2 Main fuel filter
3 Return
Fill the fuel tank Filling the fuel tank (10.216)
Replace the fuel filters Fuel filters - Replace - 9090X models (10.206)
Draining water from the water separator Fuel filters - Drain fluid - 9090X models (10.206)
51697772 08/01/2020
10.2 [10.216] / 8
20. Engine - Fuel tanks
Fuel tank - Remove
WARNING
Fuel vapors are explosive and flammable.
Do not smoke while handling fuel. Keep fuel away from flames or sparks. Shut off engine and remove
key before servicing. Always work in a well-ventilated area. Clean up spilled fuel immediately.
Failure to comply could result in death or serious injury.
W0904A
1. Drain the fuel tank:
A. Remove the fuel tank drain plug.
B. Drain the fuel into a suitable container.
C. Install the drain plug.
COIL16GR01524AA 1
2. Remove the cab lower right-hand side panel.
COIL15GR00867AA 2
3. Disconnect the cab access platform switch electrical
connector.
COIL16GR01459AA 3
51697772 08/01/2020
10.2 [10.216] / 9
21. Engine - Fuel tanks
4. Disconnect the lighting harness electrical connector.
COIL16GR01458AA 4
5. Remove the cab lower front panel left-hand retaining
bolts.
COIL15GR00986AA 5
6. 1. Remove the cab lower front panel right-hand re-
taining bolts (2).
2. With the aid of another person remove the cab
lower front panel (1).
COIL15GR00987AA 6
7. Remove the left-hand inner shield.
COIL16GR01311AA 7
51697772 08/01/2020
10.2 [10.216] / 10
22. Engine - Fuel tanks
8. WARNING
Heavy object!
ALWAYS use a hoist or get assistance to lift the
component.
Failure to comply could result in death or seri-
ous injury.
W0086A
Remove the access ladder.
COIL16GR01504AA 8
9. Detach the cab access platform safety cable.
COIL16GR01503AA 9
10. Remove the cab lower front panel retaining bracket.
COIL16GR01502AA 10
11. Detach the cab access platform inner bracket.
COIL16GR01501AA 11
51697772 08/01/2020
10.2 [10.216] / 11
23. Engine - Fuel tanks
12. WARNING
Heavy object!
ALWAYS use a hoist or get assistance to lift
the component.
Failure to comply could result in death or seri-
ous injury.
W0086A
Remove the cab access platform.
COIL16GR01500AA 12
13. Detach the windscreen washer reservoir.
COIL16GR01499AA 13
14. 1. Disconnect the windscreen washer pump electri-
cal connector (1).
2. Disconnect the windscreen washer hose (2).
COIL16GR01498AA 14
15. Detach the hand washing tank filler hose.
COIL16GR01497AA 15
51697772 08/01/2020
10.2 [10.216] / 12
24. Engine - Fuel tanks
16. Disconnect the fuel level sender electrical connector.
COIL16GR01496AA 16
17. Remove the fuel tank top cover rear support bracket.
COIL16GR01494AA 17
18. Remove the fuel tank top cover inner support bracket.
COIL16GR01495AA 18
19. Remove the fuel tank top bracket front retaining bolts.
COIL16GR01493AA 19
51697772 08/01/2020
10.2 [10.216] / 13
25. Engine - Fuel tanks
20. Remove the fuel tank top bracket.
COIL16GR01492AA 20
21. Cut the side marker wiring harness cable ties.
COIL16GR01491AA 21
22. 1. Disconnect the side marker electrical connector
(2).
2. Remove the side marker (1).
COIL16GR01490AA 22
23. Remove the fuel tank front retaining bracket:
A. Loosen the upper retaining bolts (1).
B. Remove the lower retaining bolts (2).
COIL16GR01489AA 23
51697772 08/01/2020
10.2 [10.216] / 14
26. Thank you very much for
your reading. Please Click
Here. Then Get COMPLETE
MANUAL. NO WAITING
NOTE:
If there is no response to
click on the link above,
please download the PDF
document first and then
click on it.
27. Engine - Fuel tanks
24. Remove the fuel tank inner protective shield.
COIL16GR01519AA 24
25. Remove the fuel tank supporting brackets.
COIL16GR01488AA 25
26. Support the fuel tank with suitable lifting equipment.
COIL16GR01487AA 26
27. 1. Remove the fuel tank retaining bracket (1).
2. Remove the fuel tank (2).
COIL16GR01486AA 27
51697772 08/01/2020
10.2 [10.216] / 15
28. Engine - Fuel tanks
Fuel tank - Install
WARNING
Fuel vapors are explosive and flammable.
Do not smoke while handling fuel. Keep fuel away from flames or sparks. Shut off engine and remove
key before servicing. Always work in a well-ventilated area. Clean up spilled fuel immediately.
Failure to comply could result in death or serious injury.
W0904A
1. 1. Using suitable lifting equipment install the fuel tank
(1).
2. Install the fuel tank retaining bracket (2).
COIL16GR01486AA 1
2. Remove the lifting equipment.
COIL16GR01487AA 2
3. Install the fuel tank supporting brackets.
COIL16GR01488AA 3
51697772 08/01/2020
10.2 [10.216] / 16