National Weighing and Instruments is an Australian company with over 21 years of experience selling, repairing, and calibrating various types of measuring equipment. They offer a wide range of products across Australia, including balances, scales, medical weighing equipment, indicators, weighbridges, load cells, check weighers, and software. The document provides details on the different product types and applications.

1. National Weighing and Instruments: Maintaining
Quality since 1994
National Weighing and Instruments is a well known Australian company with 21 years of
experience in sales, repair and calibration of measuring equipment. Our equipments are used in
laboratories and manufacturing companies for various purposes. There is a wide range of
products which we sell from our offices across Australia like Balances, Scales, Medical Weighing,
Indicators, Weighbridges, Load cells and Mount Kits, In line Check Weighers, Software’s and
many more.
Our Products
1. Balances: A balance is equipment which is used in the laboratory to measure the weight of
a substance like chemical. Before we use this equipment it is required to check whether it
reads 0.0000g or not. In case it reads anything else than 0.0000g, press the tare button to
recalibrate the device.

2. There are various kinds of balances available like:
 Analytical Balances
 Precision Balances
 High Capacity Precision Balances
 Compact Balances
 Value weighing Balances
 Moisture Balances
2. Scales: These are also used to measure weight as that of balances but there is a difference
between the two. It works on the basis of Hooke’s law which says:
F= kx
Where F is the Force
K is the spring constant
X is the distance the spring is flexed
There are different types of scales available like Counting, Bench Platform, Floor, Crane,
Pallet, Forklift and Dial.
3. Indicators: This device is used to display the weight measured by scales in laboratories. It
is capable of handling complex calculations and can transfer the data to other devices to
support back office management.

3. Types of indicators available:
 Programmable
 Basic Weighing
 Check Weighing
 Batch Control
 Process Control
 Calibration and Service
4. Weighbridges: It’s a large set of scales, generally used in industries to measure the weight
of huge machines, vehicles like trucks or rail.

4. Various types of Weighbridges used are:
 Steel Weighbridges
 Cement Weighbridges
 Portable Weighbridges
5. Load cell and Mount Kits: The load cell is a type of transducer used to create an electrical
signal whose magnitude is directly proportional to the force being measured.
Various types of Load cell used are:
 Hygienic Weighing module
 Shear Beams
 Single Point
 Button Load Cells
6. Retail Shop Scales: These types of scales are used in retail shops to weigh grocery.

5. Various types of retail shop scales used are:
 Simple Shop Scales
 Multi Scale System
 Hanging Dial Scale
7. Wine Analysis Equipments: As the name says, these are the equipments used to analyze
the quality of the wine produced. Right amount of glycerol tells us about the smoothness
of the wine.
Various types of Wine analysis equipments used are:
 Electronic Distilling Units
 Digital Density Meters
 Automated Enzyme Analysis
 Oenological Analysers
 Neucleo Yeast Analyser
8. Production Equipments: These equipments come to use while testing various
manufactured products, labs and factories.

6. Various types of production equipments used are:
 Cap Torque Tester
 Pipettes
 Pipette Calibrator
 Densimat
9. Softwares: These are the softwares used in plants by the engineers for efficient
production. Various types of softwares used are:
 TABSOFT
 Winweigh 4
 Batch Mate
Use our products at your lab or factory for various purposes and give a feedback to us.
Feedback always helps in improving the efficiency of any product.
Presented By
NATIONAL WEIGHING & INSTRUMENTS
www.nationalweighing.com.au