The document provides specifications for the multipurpose supply vessel Southern Ocean. It is a 136.6 meter long, 10,000 ton deadweight vessel built in 2010 in Spain. It can accommodate 120 people and is equipped for construction, installation, survey, and ROV operations through its two cranes with 250 and 90 ton capacities. The vessel has dynamic positioning systems, accommodation spaces, workshop areas, and is powered by four diesel engines for its propulsion and generator needs.
Jt 50 t screw jack instruction manual,50 ton keyed screw jack,500kn screw jack load calculation, 50 tonnes screw jack load capacity,50000kg screw jack mechanism,100000lbs jack screw acme nut static lifting force 50000 kg, dynamic lifting force 11000 kg. lifting screw (spindle) Tr90x14. high speed gear ratio 1/7, medium speed gear ratio 1/14, low speed gear ratio 1/28. upright or inverted translating screw, rotating screw and keyed screw configurations. precision positioning, self locking lead screw which support the loads and hold position without brake mechamism. single phase or three phases electric motor driven, gear motor driven or dc 24v gear reduction motor drives. thread end, clevis end, plain end and top plate (flange type) for lead screw (spindle) end types. customized various length stroke, when maximum compression load, 850 mm stroke without guidances, 1700 mm stroke with guidances. when tension load, 4000 mm stroke. single screw jack or multiple screw jacks system arrangements.
Jt 30 t screw geared hoist,30 ton screw jack assembly drawing,30 tonnes screw jack autocad drawing,300kn screw jack bellows boot,30000kg screw jack cad drawing static lifting force 30000 kg, dynamic lifting force 9600 kg. lifting screw (spindle) Tr75x12. high speed gear ratio 1/12, medium speed gear ratio 1/18, low speed gear ratio 1/36. upright or inverted translating screw, rotating screw and keyed screw configurations. precision positioning, self locking lead screw which support the loads and hold position without brake mechamism. hand wheel or hand crank manual operation, or single phase or three phases electric motor driven, gear motor driven or dc 24v gear reduction motor drives. thread end, clevis end, plain end and top plate (flange type) for lead screw (spindle) end types. customized various length stroke, when maximum compression load, 750 mm stroke without guidances, 1500 mm stroke with guidances. when tension load, 3500 mm stroke. single screw jack or multiple screw jacks system arrangements.
Jt 20 t amce screw lift,20 ton screw lift elevator,20 tonnes lead screw lift,200kn screw lift mechanism,20000kg worm gear screw lifter,40000lb screw jack hoist,3000 mm stroke hoist lift jack static lifting force 20000 kg, dynamic lifting force 8400 kg. lifting screw (spindle) Tr64x10. high speed gear ratio 1/10, medium speed gear ratio 1/20, low speed gear ratio 1/40. upright or inverted translating screw, rotating screw and keyed screw configurations. precision positioning, self locking lead screw which support the loads and hold position without brake mechamism. hand wheel or hand crank manual operation, or single phase or three phases electric motor driven, gear motor driven or dc 24v gear reduction motor drives. thread end, clevis end, plain end and top plate (flange type) for lead screw (spindle) end types. customized various length stroke, when maximum compression load, 600 mm stroke without guidances, 1200 mm stroke with guidances. when tension load, 3000 mm stroke. single screw jack or multiple screw jacks system arrangements.
Jt 15 t load lifting screw jacks,15 ton locking screw jack,15 tonnes jackscrew and self locking,150kn self locking gear jack,15000kg self locking jack, 30000lbs machine screw lift static lifting force 15000 kg, dynamic lifting force 6400 kg. lifting screw (spindle) Tr50x8. high speed gear ratio 1/8, medium speed gear ratio 1/16, low speed gear ratio 1/32. upright or inverted translating screw, rotating screw and keyed screw configurations. precision positioning, self locking lead screw which support the loads and hold position without brake mechamism. hand wheel or hand crank manual operation, or single phase or three phases electric motor driven, gear motor driven or dc 24v gear reduction motor drives. thread end, clevis end, plain end and top plate (flange type) for lead screw (spindle) end types. customized various length stroke, when maximum compression load, 500 mm stroke without guidances, 1000 mm stroke with guidances. when tension load, 2500 mm stroke. single screw jack or multiple screw jacks system arrangements.
Jt 2 t anti backlash screw jack,2 ton lifting gear box,20 kn actuator lift,2000kg lifting jacks,2 tonnes lifting jacks screw,4000lb screw jack actuator, jack lift, bearing for screw jacks static lifting force 2000 kg, dynamic lifting force 1350 kg. lifting screw (spindle) Tr25x5. high speed gear ratio 1/5, medium speed gear ratio 1/10, low speed gear ratio 1/20. upright or inverted translating screw, rotating screw and keyed screw configurations. precision positioning, self locking lead screw which support the loads and hold position without brake mechamism. hand wheel or hand crank manual operation, or single phase or three phases electric motor driven, gear motor driven or dc 24v gear reduction motor drives. thread end, clevis end, plain end and top plate (flange type) for lead screw (spindle) end types. customized various length stroke, when maximum compression load, 200 mm stroke without guidances, 400 mm stroke with guidances. when tension load, 1200 mm stroke. single screw jack or multiple screw jacks system arrangements
Jt 100 t screw jack threaded rod,100 ton screw jack torque calculation,100 tonnes screw jack thread type,1000kn screw jack actuator,100000kg linear actuator jack,actuator jack screw, linear actuator screw jack static lifting force 100000 kg, dynamic lifting force 26000 kg. lifting screw (spindle) Tr100x16. high speed gear ratio 1/8, medium speed gear ratio 1/16, low speed gear ratio 1/32. upright or inverted translating screw, rotating screw and keyed screw configurations. precision positioning, self locking lead screw which support the loads and hold position without brake mechamism. single phase or three phases electric motor driven, gear motor driven or dc 24v gear reduction motor drives. thread end, clevis end, plain end and top plate (flange type) for lead screw (spindle) end types. customized various length stroke, when maximum compression load, 900 mm stroke without guidances, 1800 mm stroke with guidances. when tension load, 4500 mm stroke. single screw jack or multiple screw jacks system arrangements.
Jt 40 t screw jack efficiency, 40 ton screw jack engineering drawing, 40 tonnes screw jack force calculation, 400 kn screw jack grease,40000kg screw jack gear ratio,80000lbs screw jack worm gear
Jt 50 t screw jack instruction manual,50 ton keyed screw jack,500kn screw jack load calculation, 50 tonnes screw jack load capacity,50000kg screw jack mechanism,100000lbs jack screw acme nut static lifting force 50000 kg, dynamic lifting force 11000 kg. lifting screw (spindle) Tr90x14. high speed gear ratio 1/7, medium speed gear ratio 1/14, low speed gear ratio 1/28. upright or inverted translating screw, rotating screw and keyed screw configurations. precision positioning, self locking lead screw which support the loads and hold position without brake mechamism. single phase or three phases electric motor driven, gear motor driven or dc 24v gear reduction motor drives. thread end, clevis end, plain end and top plate (flange type) for lead screw (spindle) end types. customized various length stroke, when maximum compression load, 850 mm stroke without guidances, 1700 mm stroke with guidances. when tension load, 4000 mm stroke. single screw jack or multiple screw jacks system arrangements.
Jt 30 t screw geared hoist,30 ton screw jack assembly drawing,30 tonnes screw jack autocad drawing,300kn screw jack bellows boot,30000kg screw jack cad drawing static lifting force 30000 kg, dynamic lifting force 9600 kg. lifting screw (spindle) Tr75x12. high speed gear ratio 1/12, medium speed gear ratio 1/18, low speed gear ratio 1/36. upright or inverted translating screw, rotating screw and keyed screw configurations. precision positioning, self locking lead screw which support the loads and hold position without brake mechamism. hand wheel or hand crank manual operation, or single phase or three phases electric motor driven, gear motor driven or dc 24v gear reduction motor drives. thread end, clevis end, plain end and top plate (flange type) for lead screw (spindle) end types. customized various length stroke, when maximum compression load, 750 mm stroke without guidances, 1500 mm stroke with guidances. when tension load, 3500 mm stroke. single screw jack or multiple screw jacks system arrangements.
Jt 20 t amce screw lift,20 ton screw lift elevator,20 tonnes lead screw lift,200kn screw lift mechanism,20000kg worm gear screw lifter,40000lb screw jack hoist,3000 mm stroke hoist lift jack static lifting force 20000 kg, dynamic lifting force 8400 kg. lifting screw (spindle) Tr64x10. high speed gear ratio 1/10, medium speed gear ratio 1/20, low speed gear ratio 1/40. upright or inverted translating screw, rotating screw and keyed screw configurations. precision positioning, self locking lead screw which support the loads and hold position without brake mechamism. hand wheel or hand crank manual operation, or single phase or three phases electric motor driven, gear motor driven or dc 24v gear reduction motor drives. thread end, clevis end, plain end and top plate (flange type) for lead screw (spindle) end types. customized various length stroke, when maximum compression load, 600 mm stroke without guidances, 1200 mm stroke with guidances. when tension load, 3000 mm stroke. single screw jack or multiple screw jacks system arrangements.
Jt 15 t load lifting screw jacks,15 ton locking screw jack,15 tonnes jackscrew and self locking,150kn self locking gear jack,15000kg self locking jack, 30000lbs machine screw lift static lifting force 15000 kg, dynamic lifting force 6400 kg. lifting screw (spindle) Tr50x8. high speed gear ratio 1/8, medium speed gear ratio 1/16, low speed gear ratio 1/32. upright or inverted translating screw, rotating screw and keyed screw configurations. precision positioning, self locking lead screw which support the loads and hold position without brake mechamism. hand wheel or hand crank manual operation, or single phase or three phases electric motor driven, gear motor driven or dc 24v gear reduction motor drives. thread end, clevis end, plain end and top plate (flange type) for lead screw (spindle) end types. customized various length stroke, when maximum compression load, 500 mm stroke without guidances, 1000 mm stroke with guidances. when tension load, 2500 mm stroke. single screw jack or multiple screw jacks system arrangements.
Jt 2 t anti backlash screw jack,2 ton lifting gear box,20 kn actuator lift,2000kg lifting jacks,2 tonnes lifting jacks screw,4000lb screw jack actuator, jack lift, bearing for screw jacks static lifting force 2000 kg, dynamic lifting force 1350 kg. lifting screw (spindle) Tr25x5. high speed gear ratio 1/5, medium speed gear ratio 1/10, low speed gear ratio 1/20. upright or inverted translating screw, rotating screw and keyed screw configurations. precision positioning, self locking lead screw which support the loads and hold position without brake mechamism. hand wheel or hand crank manual operation, or single phase or three phases electric motor driven, gear motor driven or dc 24v gear reduction motor drives. thread end, clevis end, plain end and top plate (flange type) for lead screw (spindle) end types. customized various length stroke, when maximum compression load, 200 mm stroke without guidances, 400 mm stroke with guidances. when tension load, 1200 mm stroke. single screw jack or multiple screw jacks system arrangements
Jt 100 t screw jack threaded rod,100 ton screw jack torque calculation,100 tonnes screw jack thread type,1000kn screw jack actuator,100000kg linear actuator jack,actuator jack screw, linear actuator screw jack static lifting force 100000 kg, dynamic lifting force 26000 kg. lifting screw (spindle) Tr100x16. high speed gear ratio 1/8, medium speed gear ratio 1/16, low speed gear ratio 1/32. upright or inverted translating screw, rotating screw and keyed screw configurations. precision positioning, self locking lead screw which support the loads and hold position without brake mechamism. single phase or three phases electric motor driven, gear motor driven or dc 24v gear reduction motor drives. thread end, clevis end, plain end and top plate (flange type) for lead screw (spindle) end types. customized various length stroke, when maximum compression load, 900 mm stroke without guidances, 1800 mm stroke with guidances. when tension load, 4500 mm stroke. single screw jack or multiple screw jacks system arrangements.
Jt 40 t screw jack efficiency, 40 ton screw jack engineering drawing, 40 tonnes screw jack force calculation, 400 kn screw jack grease,40000kg screw jack gear ratio,80000lbs screw jack worm gear
This report on Heavy Vehicle Service Center Department of HZL,Bhilwara with all Technical data.It will beneficent for those who wanted to know about the HZL.
BOURBON offers a wide range of Marine and Subsea services for the most demanding clients: super majors, national companies, independents, contractors. Fully aligned on OCIMF standards, the Group relies on strong local partnerships, training and support to ensure the highest quality of service worldwide.
MANGUSTA OVERMARINE105, 2005, 4.250.000 € For Sale Brochure. Presented By lon...Longitude 64 Isle Of Man
Category: Motoryacht with cockpit, Condition: Pre-owned, Seller Type: Yacht Broker, MANGUSTA, Overmarine105, Year: 2005, LOA: 105ft , Beam: 22ft 6, Draft: 3ft 6, Engine: Mtu, Diesel
Palma, Baleares, Spain
Mangusta 105 Overmarine (2005 Model) With Twin Mtu 12 Cylinder 396 Te94(2250 Hp) Diesel Jet Engines. Charismatic, Impressive, Stylish, These Are Some Of The Few Adjectives That Can Describe The Flow Of Emotions One Is Filled With When Looking At A Magusta 105. The Unique Concept, Both As An Open And Classic Motoryacht, Is An Invitation To Fast Cruising.
At Over 30 Knots, You Will Be Amazed By The Utmost Silence Of Her Engines And A Level Of Comfort You Would Not Have Expected At Such Speed. This Particular Model Has Matriculation Tax Paid, Ready For Immediate Delivery And Is In Superb Condition, Benefitting From Recent Maintenance. In Superb Condition With Low Hours, This Really Is An Opportunity Not To Be Missed. Please Call Our Team At Carine Yachts For Further Information Or Indeed To Arrange A Viewing.
For Sale Brochure. Presented By longitude64.im. Visit our site for more information http://www.longitude64.im
This report on Heavy Vehicle Service Center Department of HZL,Bhilwara with all Technical data.It will beneficent for those who wanted to know about the HZL.
BOURBON offers a wide range of Marine and Subsea services for the most demanding clients: super majors, national companies, independents, contractors. Fully aligned on OCIMF standards, the Group relies on strong local partnerships, training and support to ensure the highest quality of service worldwide.
MANGUSTA OVERMARINE105, 2005, 4.250.000 € For Sale Brochure. Presented By lon...Longitude 64 Isle Of Man
Category: Motoryacht with cockpit, Condition: Pre-owned, Seller Type: Yacht Broker, MANGUSTA, Overmarine105, Year: 2005, LOA: 105ft , Beam: 22ft 6, Draft: 3ft 6, Engine: Mtu, Diesel
Palma, Baleares, Spain
Mangusta 105 Overmarine (2005 Model) With Twin Mtu 12 Cylinder 396 Te94(2250 Hp) Diesel Jet Engines. Charismatic, Impressive, Stylish, These Are Some Of The Few Adjectives That Can Describe The Flow Of Emotions One Is Filled With When Looking At A Magusta 105. The Unique Concept, Both As An Open And Classic Motoryacht, Is An Invitation To Fast Cruising.
At Over 30 Knots, You Will Be Amazed By The Utmost Silence Of Her Engines And A Level Of Comfort You Would Not Have Expected At Such Speed. This Particular Model Has Matriculation Tax Paid, Ready For Immediate Delivery And Is In Superb Condition, Benefitting From Recent Maintenance. In Superb Condition With Low Hours, This Really Is An Opportunity Not To Be Missed. Please Call Our Team At Carine Yachts For Further Information Or Indeed To Arrange A Viewing.
For Sale Brochure. Presented By longitude64.im. Visit our site for more information http://www.longitude64.im
1. MULTIPURPOSESUPPLYVESSEL
SOUTHERN OCEAN MPSV
DP2 Construction & Maintenance Vessel
10,000 t deadweight
Updated: 21-09-2011
Owner: Oceanteam BOURBON 4 AS Flag: Malta.
Vessel Name: SOUTHERN OCEAN Builder: Metalships and dock , Vigo (Spain)
Type: Construction support vessel Class: DNV + 1A1, DYNPOS-AUTR, EO, DK (+) ,CLEAN DESIGN
Year: 2010 COMF-(V3), CARGO SHIP, NAUT-OSV , HELIDECK.
SOUTHERN OCEAN is a Sawi-
con design, diesel electric, DP2,
multipurpose subsea services
support vessel with 2 deep
AHC water crane.
The vessel is designed for
world-wide, deep water operations
to fulfill the following duties.
Construction work.
Subsea installation.
Umbilical laying.
ROV Operations.
Survey.
REGISTRATION
2. DIMENSIONS
Length overall: ........................................................................136.60 m
Breadth moulded: ....................................................................27.00 m
Depth: ............................................................................................9.70 m
Draft max:......................................................................................6.85 m
Dead weight @ 6.85 m draft: ..…………...…………10,000 t
ACCOMMODATIONS
Accommodations for: ....................................................................120 pers.
Single cabins: ..............................................................................................50
2 man cabins: .............................................................................................35
Hospital (with 2 beds): ...............................................................................1
1 Mess room (60 seats), 1 recreation room (50 seats), 1 conference
room (12 seats), laundry, galley, stores, offices, reception room
for helideck, gymnasium, sauna, cinema.
Fully air conditonned.
Work shop.CAPACITIES
Main deck area: ..................................................2,400 m² @ 10 t/m²
Fuel oil: ......................................................................................1,700 m3
Ballast water: ............................................................................7,400 m3
Fresh water ...............................................................................1,000 m3
Fuel pump delivery: ……….…………..2 x 50 m3
/hr at 2 bars
Fresh water pump: (4’’ Weco)……………50 m3
/hr at 2.5 bars
Water maker: ….……………………………..2 x 25 m3
/day
PROPULSION - MACHINERY
Main Diesel engines: ......................................................4 x 3,360 kW.
Generators: .......................................................................4 x 3,230 kW.
Propulsion: .........................................2 x 3,500 kW, azipull thrusters.
Bow thrusters: ………………..1 swing-up thruster 1,500 kW.
2 x 1,500 kW Tunnel thruster.
Harbourg generator: .................................................................580 kW.
SPEED / CONSUMPTION
Maximum speed (100%): .........................................................15 knots
Service speed (80%): .................................................................12 knots
DYNAMIC POSITIONING SYSTEM
Comply with DNV notation NMD class 2, DYNPOS-AUTR.
Kongsberg K-Pos 21, with references:
- 2 Simrad HIPAP 500
- 2 DGPS 116/132
- LTW Taut Wire Mk 15
- Fan Beam.
NAVIGATION
1 radar S-band-1 radar X-band–1 radar slave.
COMMUNICATION
UHF, VHF, Sat C, Fleet 77.
KU band 128 kbit.
Cat 5 network, Video network, telephone/video in all cabins.
MAIN PARTICULARS
MACHINERY / PERFORMANCE
EQUIPMENT & ELECTRONICS
DECK EQUIPMENT
Main crane (midship PS): AHC MACGREGOR 250t
- Harbour capacity………..DAF1.2 - 250t @10m - 70t @ 35m
- Offshore capacity……….DAF1.5 - 217t @10m - 65t @ 35m
2500m wire
Secondary crane on starboard side forward: AHC NATOIL 90t
- Harbour capacity………...DAF 1.2 - 110t @10m-40t @ 30m
- Offshore capacity……….DAF 1.6 - 90 t @13 m -30t @ 30m
1600m wire
Provision crane: ...................................................................5 t @12 m
Mooring winches: ......................................................................2 x 10 t
Moon pool: ......................................................................7.20 x 7.20 m
Helideck: ......................................Design for S92 (20.90 x 20.90 m)
Stabilising equipment: .................................2 passive anti roll tanks
2 anti heeling systems
TECHNICAL SPECIFICATIONS
MPSV - SOUTHERN OCEAN
All particulars believed to be correct but not guaranteed
Bourbon Offshore - 148, rue Sainte - 13007 Marseille - France
Internet: www.bourbon-online.com - E-mail: bourbon-offshore@bourbon-online.com