This service manual provides instructions for servicing Mitsubishi forklifts. It begins with an overview of safety precautions and covers systems like cooling, electrical, powertrain, transmissions, axles, brakes, steering, hydraulics, masts and forks. The manual contains specifications, component locations, removal/installation steps, and troubleshooting guides. It is intended to help technicians properly maintain the forklifts for long productive use.
CATERPILLAR CAT DP70 FORKLIFT LIFT TRUCKS Service Repair Manual SN:T20C-60001...jsenmde8udj
This is the Highly Detailed factory service repair manual for theCATERPILLAR CAT DP70 FORKLIFT LIFT TRUCKS, this Service Manual has detailed illustrations as well as step by step instructions,It is 100 percents complete and intact. they are specifically written for the do-it-yourself-er as well as the experienced mechanic.CATERPILLAR CAT DP70 FORKLIFT LIFT TRUCKS Service Repair Workshop Manual provides step-by-step instructions based on the complete dis-assembly of the machine. It is this level of detail, along with hundreds of photos and illustrations, that guide the reader through each service and repair procedure. Complete download comes in pdf format which can work under all PC based windows operating system and Mac also, All pages are printable. Using this repair manual is an inexpensive way to keep your vehicle working properly.
Service Repair Manual Covers:
Chassis, Mast and Attachments: Foreword
Chassis, Mast and Attachments: General Information
Chassis, Mast and Attachments: Cooling System
Chassis, Mast and Attachments: Electrical System
Chassis, Mast and Attachments: Electrical System - Schematics
Chassis, Mast and Attachments: Power Train
Chassis, Mast and Attachments: Power shift Transmission
Chassis, Mast and Attachments: Front Axle and Reduction Differential
Chassis, Mast and Attachments: Rear Axle
Chassis, Mast and Attachments: Brake System
Chassis, Mast and Attachments: Steering System
Chassis, Mast and Attachments: Hydraulic System
Chassis, Mast and Attachments: Mast and Forks
Chassis, Mast and Attachments: Fork Positioner
Chassis, Mast and Attachments: Side Shifter
Chassis, Mast and Attachments: Service Data
S6S Diesel Engine: General
S6S Diesel Engine: Maintenance Standards
S6S Diesel Engine: Special Tools
S6S Diesel Engine: Overhaul Instructions
S6S Diesel Engine: Adjustments, Bench Test, Performance Tests
S6S Diesel Engine: Engine Auxiliaries Removal and Installation
S6S Diesel Engine: Engine Main Parts
S6S Diesel Engine: Inlet and Exhaust System
S6S Diesel Engine: Lubrication System
S6S Diesel Engine: Cooling System
S6S Diesel Engine: Fuel System
S6S Diesel Engine: Electrical System
S6S Diesel Engine: Workshop Tips
File Format: PDF
Compatible: All Versions of Windows & Mac
Language: English
Requirements: Adobe PDF Reader
NO waiting, Buy from responsible seller and get INSTANT DOWNLOAD, Without wasting your hard-owned money on uncertainty or surprise! All pages are is great to haveCATERPILLAR CAT DP70 FORKLIFT LIFT TRUCKS Service Repair Workshop Manual.
Looking for some other Service Repair Manual,please check:
https://www.aservicemanualpdf.com/
Thanks for visiting!
8
CATERPILLAR CAT DP70 FORKLIFT LIFT TRUCKS Service Repair Manual SN:T20C-60001...jsenmde8udj
This is the Highly Detailed factory service repair manual for theCATERPILLAR CAT DP70 FORKLIFT LIFT TRUCKS, this Service Manual has detailed illustrations as well as step by step instructions,It is 100 percents complete and intact. they are specifically written for the do-it-yourself-er as well as the experienced mechanic.CATERPILLAR CAT DP70 FORKLIFT LIFT TRUCKS Service Repair Workshop Manual provides step-by-step instructions based on the complete dis-assembly of the machine. It is this level of detail, along with hundreds of photos and illustrations, that guide the reader through each service and repair procedure. Complete download comes in pdf format which can work under all PC based windows operating system and Mac also, All pages are printable. Using this repair manual is an inexpensive way to keep your vehicle working properly.
Service Repair Manual Covers:
Chassis, Mast and Attachments: Foreword
Chassis, Mast and Attachments: General Information
Chassis, Mast and Attachments: Cooling System
Chassis, Mast and Attachments: Electrical System
Chassis, Mast and Attachments: Electrical System - Schematics
Chassis, Mast and Attachments: Power Train
Chassis, Mast and Attachments: Power shift Transmission
Chassis, Mast and Attachments: Front Axle and Reduction Differential
Chassis, Mast and Attachments: Rear Axle
Chassis, Mast and Attachments: Brake System
Chassis, Mast and Attachments: Steering System
Chassis, Mast and Attachments: Hydraulic System
Chassis, Mast and Attachments: Mast and Forks
Chassis, Mast and Attachments: Fork Positioner
Chassis, Mast and Attachments: Side Shifter
Chassis, Mast and Attachments: Service Data
S6S Diesel Engine: General
S6S Diesel Engine: Maintenance Standards
S6S Diesel Engine: Special Tools
S6S Diesel Engine: Overhaul Instructions
S6S Diesel Engine: Adjustments, Bench Test, Performance Tests
S6S Diesel Engine: Engine Auxiliaries Removal and Installation
S6S Diesel Engine: Engine Main Parts
S6S Diesel Engine: Inlet and Exhaust System
S6S Diesel Engine: Lubrication System
S6S Diesel Engine: Cooling System
S6S Diesel Engine: Fuel System
S6S Diesel Engine: Electrical System
S6S Diesel Engine: Workshop Tips
File Format: PDF
Compatible: All Versions of Windows & Mac
Language: English
Requirements: Adobe PDF Reader
NO waiting, Buy from responsible seller and get INSTANT DOWNLOAD, Without wasting your hard-owned money on uncertainty or surprise! All pages are is great to haveCATERPILLAR CAT DP70 FORKLIFT LIFT TRUCKS Service Repair Workshop Manual.
Looking for some other Service Repair Manual,please check:
https://www.aservicemanualpdf.com/
Thanks for visiting!
8
What Exactly Is The Common Rail Direct Injection System & How Does It WorkMotor Cars International
Learn about Common Rail Direct Injection (CRDi) - the revolutionary technology that has made diesel engines more efficient. Explore its workings, advantages like enhanced fuel efficiency and increased power output, along with drawbacks such as complexity and higher initial cost. Compare CRDi with traditional diesel engines and discover why it's the preferred choice for modern engines.
What Exactly Is The Common Rail Direct Injection System & How Does It WorkMotor Cars International
Learn about Common Rail Direct Injection (CRDi) - the revolutionary technology that has made diesel engines more efficient. Explore its workings, advantages like enhanced fuel efficiency and increased power output, along with drawbacks such as complexity and higher initial cost. Compare CRDi with traditional diesel engines and discover why it's the preferred choice for modern engines.
Things to remember while upgrading the brakes of your carjennifermiller8137
Upgrading the brakes of your car? Keep these things in mind before doing so. Additionally, start using an OBD 2 GPS tracker so that you never miss a vehicle maintenance appointment. On top of this, a car GPS tracker will also let you master good driving habits that will let you increase the operational life of your car’s brakes.
Fleet management these days is next to impossible without connected vehicle solutions. Why? Well, fleet trackers and accompanying connected vehicle management solutions tend to offer quite a few hard-to-ignore benefits to fleet managers and businesses alike. Let’s check them out!
What Does the PARKTRONIC Inoperative, See Owner's Manual Message Mean for You...Autohaus Service and Sales
Learn what "PARKTRONIC Inoperative, See Owner's Manual" means for your Mercedes-Benz. This message indicates a malfunction in the parking assistance system, potentially due to sensor issues or electrical faults. Prompt attention is crucial to ensure safety and functionality. Follow steps outlined for diagnosis and repair in the owner's manual.
5 Warning Signs Your BMW's Intelligent Battery Sensor Needs AttentionBertini's German Motors
IBS monitors and manages your BMW’s battery performance. If it malfunctions, you will have to deal with an array of electrical issues in your vehicle. Recognize warning signs like dimming headlights, frequent battery replacements, and electrical malfunctions to address potential IBS issues promptly.
"Trans Failsafe Prog" on your BMW X5 indicates potential transmission issues requiring immediate action. This safety feature activates in response to abnormalities like low fluid levels, leaks, faulty sensors, electrical or mechanical failures, and overheating.
Core technology of Hyundai Motor Group's EV platform 'E-GMP'Hyundai Motor Group
What’s the force behind Hyundai Motor Group's EV performance and quality?
Maximized driving performance and quick charging time through high-density battery pack and fast charging technology and applicable to various vehicle types!
Discover more about Hyundai Motor Group’s EV platform ‘E-GMP’!
Ever been troubled by the blinking sign and didn’t know what to do?
Here’s a handy guide to dashboard symbols so that you’ll never be confused again!
Save them for later and save the trouble!
Why Is Your BMW X3 Hood Not Responding To Release CommandsDart Auto
Experiencing difficulty opening your BMW X3's hood? This guide explores potential issues like mechanical obstruction, hood release mechanism failure, electrical problems, and emergency release malfunctions. Troubleshooting tips include basic checks, clearing obstructions, applying pressure, and using the emergency release.
In this presentation, we have discussed a very important feature of BMW X5 cars… the Comfort Access. Things that can significantly limit its functionality. And things that you can try to restore the functionality of such a convenient feature of your vehicle.
Symptoms like intermittent starting and key recognition errors signal potential problems with your Mercedes’ EIS. Use diagnostic steps like error code checks and spare key tests. Professional diagnosis and solutions like EIS replacement ensure safe driving. Consult a qualified technician for accurate diagnosis and repair.
Comprehensive program for Agricultural Finance, the Automotive Sector, and Empowerment . We will define the full scope and provide a detailed two-week plan for identifying strategic partners in each area within Limpopo, including target areas.:
1. Agricultural : Supporting Primary and Secondary Agriculture
• Scope: Provide support solutions to enhance agricultural productivity and sustainability.
• Target Areas: Polokwane, Tzaneen, Thohoyandou, Makhado, and Giyani.
2. Automotive Sector: Partnerships with Mechanics and Panel Beater Shops
• Scope: Develop collaborations with automotive service providers to improve service quality and business operations.
• Target Areas: Polokwane, Lephalale, Mokopane, Phalaborwa, and Bela-Bela.
3. Empowerment : Focusing on Women Empowerment
• Scope: Provide business support support and training to women-owned businesses, promoting economic inclusion.
• Target Areas: Polokwane, Thohoyandou, Musina, Burgersfort, and Louis Trichardt.
We will also prioritize Industrial Economic Zone areas and their priorities.
Sign up on https://profilesmes.online/welcome/
To be eligible:
1. You must have a registered business and operate in Limpopo
2. Generate revenue
3. Sectors : Agriculture ( primary and secondary) and Automative
Women and Youth are encouraged to apply even if you don't fall in those sectors.
2. 1
Pub.No. 99709-76140
FOREWORD
This service manual is a guide for servicing Mitsubishi forklift trucks. For your conve-
nience the instructions are grouped by systems as a ready reference.
The long productive life of your forklift truck(s) depends on regular and proper servicing.
Servicing consistent with what you will learn by reading this service manual.
Read the respective sections of this manual carefully and familiarize yourself with all of
the components before attempting to start a test, repair or rebuild job.
The descriptions, illustrations and specifications contained in this manual are for trucks
with serial numbers in effect at the time of printing. Mitsubishi Forklift Trucks reserves the
right to change specifications or design without notice and without incurring obligation.
The trucks listed in this manual are powered by S6S diesel engines. For the engine servic-
ing, please refer to the applicable engine service manual.
This document shall not be transferred, rented, or reproduced to a third party without per-
mission.
Indicates a potentially hazardous situation which, if not avoided, could result in death or serious injury.
Indicates a potentially hazardous situation which, if not avoided, may result in death or serious injury or
damage to the machine.
Indicates a condition that can cause damage to, or shorten service life of, the forklift truck.
WARNING
CAUTION
NOTE
3. 2
WARNING
The proper and safe lubrication and maintenance
for these forklift trucks, recommended by Mitsub-
ishi Forklift Trucks, are outlined in the OPERATION
& MAINTENANCE MANUAL for these trucks.
Improper performance of lubrication or mainte-
nance procedures is dangerous and could result
in injury or death. Read and understand the OPER-
ATION & MAINTENANCE MANUAL before perform-
ing any lubrication or maintenance on these
trucks.
WARNING
Do not operate these trucks unless you have read
and understood the instructions in the OPERA-
TION & MAINTENANCE MANUAL. Improper truck
operation is dangerous and could result in injury
or death.
The serviceman or mechanic may be unfamiliar with many
of the systems on this truck. This makes it important to use
caution when performing service work. A knowledge of the
system and/or components is important before the removal
or disassembly of any component.
Because of the size of some of the truck components, the
serviceman or mechanic should check the weights noted in
this Manual. Use proper lifting procedures when removing
any components.
Following is a list of basic precautions that should always
be observed.
(1) Read and understand all warning plates and decals on
the truck before operating, lubricating or repairing the
product.
(2) Always wear protective glasses and protective shoes
when working around trucks. In particular, wear pro-
tective glasses when pounding on any part of the truck
or its attachments with a hammer or sledge. Use weld-
ers gloves, hood/goggles, apron and other protective
clothing appropriate to the welding job being per-
formed. Do not wear loose-fitting or torn clothing.
Remove all rings from fingers when working on
machinery.
(3) Do not work on any truck that is supported only by lift
jacks or a hoist. Always use blocks or jack stands to
support the truck before performing any disassembly.
(4) Lower the forks or other implements to the ground
before performing any work on the truck. If this cannot
be done, make sure the forks or other implements are
blocked correctly to prevent them from dropping unex-
pectedly.
(5) Use steps and grab handles (if applicable) when mount-
ing or dismounting a truck. Clean any mud or debris
from steps, walkways or work platforms before using.
Always face truck when using steps, ladders and walk-
ways. When it is not possible to use the designed
access system, provide ladders, scaffolds, or work plat-
forms to perform safe repair operations.
(6) To avoid back injury, use a hoist when lifting compo-
nents which weight 23 kg (50 lb.) or more. Make sure
all chains, hooks, slings, etc., are in good condition and
are of the correct capacity. Be sure hooks are posi-
tioned correctly. Lifting eyes are not to be side loaded
during a lifting operation.
(7) To avoid burns, be alert for hot parts on trucks which
have just been stopped and hot fluids in lines, tubes and
compartments.
(8) Be careful when removing cover plates. Gradually
back off the last two bolts or nuts located at opposite
ends of the cover or device and pry cover loose to
relieve any spring or other pressure, before removing
the last two bolts or nuts completely.
(9) Be careful when removing filler caps, breathers and
plugs on the truck. Hold a rag over the cap or plug to
prevent being sprayed or splashed by liquids under
pressure. The danger is even greater if the truck has just
been stopped because fluids can be hot.
(10)Always use tools that are in good condition and be sure
you understand how to use them before performing any
service work.
(11)Reinstall all fasteners with same part number. Do not
use a lesser quality fastener if replacements are neces-
sary.
(12)If possible, make all repairs with the truck parked on a
level, hard surface. Block truck so it does not roll while
working on or under truck.
(13)Disconnect battery and discharge any capacitors (elec-
tric trucks) before starting to work on truck. Hang “Do
not Operate” tag in the Operator’s Compartment.
4. 3
(14)Repairs, which require welding, should be performed
only with the benefit of the appropriate reference infor-
mation and by personnel adequately trained and knowl-
edgeable in welding procedures. Determine type of
metal being welded and select correct welding proce-
dure and electrodes, rods or wire to provide a weld
metal strength equivalent at least to that of parent
metal.
(15)Do not damage wiring during removal operations.
Reinstall the wiring so it is not damaged nor will it be
damaged in operation by contacting sharp corners, or
by rubbing against some object or hot surface. Place
wiring away form oil pipe.
(16)Be sure all protective devices including guards and
shields are properly installed and functioning correctly
before starting a repair. If a guard or shield must be
removed to perform the repair work, use extra caution.
(17)Always support the mast and carriage to keep carriage
or attachments raised when maintenance or repair work
is performed, which requires the mast in the raised
position.
(18)Loose or damaged fuel, lubricant and hydraulic lines,
tubes and hoses can cause fires. Do not bend or strike
high pressure lines or install ones which have been bent
or damaged. Inspect lines, tubes and hoses carefully.
Do not check for leaks with your hands. Pin hole (very
small) leaks can result in a high velocity oil stream that
will be invisible close to the hose. This oil can pene-
trate the skin and cause personal injury. Use cardboard
or paper to locate pin hole leaks.
(19)Tighten connections to the correct torque. Make sure
that all heat shields, clamps and guards are installed
correctly to avoid excessive heat, vibration or rubbing
against other parts during operation. Shields that pro-
tect against oil spray onto hot exhaust components in
event of a line, tube or seal failure, must be installed
correctly.
(20)Relieve all pressure in air, oil or water systems before
any lines, fittings or related items are disconnected or
removed. Always make sure all raised components are
blocked correctly and be alert for possible pressure
when disconnecting any device from a system that uti-
lizes pressure.
(21)Do not operate a truck if any rotating part is damaged
or contacts any other part during operation. Any high
speed rotating component that has been damaged or
altered should be checked for balance before reusing.
5. 4
HOW TO READ THIS MANUAL (Mounting, Dismounting, Disas-
sembly, and Assembly)
Disassembly
Disassembly sequence
(1) Bolt, Washer, Cover (part name)
(2) Snap ring, Output shaft (part name)
Suggestion for disassembly
(1) Output shaft removal
Use the special tools to remove output shaft.
Service data provided in this man-
ual
1
The suggestion for
disassembly is shown
below.
2
209603
Index numbers show
the sequence of
disassembly.
209604
Clearance between
cylinder body and
piston
Standard val-
ue
0.020 to 0.105 mm
(0.00079 to 0.00413
in.)
Repair or ser-
vice limit
0.15 mm
(0.059 in.)
6. 5
Symbols or abbreviations
OP Option
R1/4 Taper pipe thread (external) 1/4 inch (formerly PT1/4)
Rc1/8 Taper pipe thread (internal) 1/8 inch (formerly PT1/
8)
G1/4A Straight pipe thread (external) 1/4 inch (formerly
PF1/4-A)
Rp1/8 Straight pipe thread (internal) 1/8 inch (formerly
PS1/8)
Units
• SI Units are used in this manual.
• The following table shows the conversion of SI unit and
customary unit.
Item SI unit Customary unit
Force 1 N 0.1020 kgf
Pressure 1 kPa 0.0102 kgf/cm2
Torque 1 N•m 0.1020 kgf•m
7. 7
1
2
3
4
5
6
7
8
9
10
11
12
13
14
GROUP INDEX
GROUP INDEX Items
GENERAL INFORMATION
Model View, Truck Models Covered, Serial Number Locations, Main
Specifications, Chassis and Mast Model Identification, Dimensions
COOLING SYSTEM
Specifications, Structure, Suggestions for Removal and Installation, Inspection
and Adjustment
ELECTRICAL SYSTEM
Specifications, Location of Components, Structure, Disassembly and
Reassembly, Batteries and Charging, Troubleshooting, Electrical Wiring
Diagram
POWER TRAIN
Specifications, Structure, Reduction Ratio, Removal and Installation of Engine
and Transmission Unit
POWERSHIFT TRANSMIS-
SIONS
Specifications, Structure, Suggestions for Removal and Installation,
Disassembly and Reassembly, Readjust, Troubleshooting, Service Data
FRONT AXLE AND REDUC-
TION DIFFERENTIAL
Specifications, Structure, Suggestions for Removal and Installation,
Disassembly and Reassembly, Troubleshooting, Service Data
REAR AXLE
Specifications, Description, Removal and Installation, Disassembly and
Reassembly, Adjusting, Troubleshooting, Service Data
BRAKE SYSTEM
Specifications, Structure, Disassembly and Reassembly,Adjustment and Testing,
Troubleshooting, Service Data
STEERING SYSTEM
Specifications, Structure and Functions, Removal and Installation, Disassembly
and Reassembly, Troubleshooting, Service Data
HYDRAULIC SYSTEM
Specifications, Structure and Functions, Removal and Installation, Disassembly
and Reassembly, Inspection and Adjustment, Testing, Troubleshooting, Service
Data
MASTS AND FORKS
Specifications, Structure, Operation of Triplex Mast, Suggestions for Removal
and Installation, Disassembly and Reassembly, Chain Adjustment,
Troubleshooting, Service Data
FORK POSITIONER
Applicable Attachment Models, Specifications, Structure, Suggestions for
Removal and Installation, Disassembly and Reassembly, Troubleshooting,
Service Data
SIDE SHIFTER
Applicable Attachment Models, Specifications, Structure, Suggestions for
Removal and Installation, Disassembly and Reassembly, Troubleshooting,
Service Data
SERVICE DATA
Inspection Point, Tightening Torque of Standard Bolts, Periodic Replacement
Parts, Lubrication Standards, Weight of Major Components, Special Tools
8. 1-1
1
2
3
4
5
6
7
8
9
10
11
12
13
14
GENERAL INFORMATION
1. Model View...................................................................................................................1-2
2. Truck Models Covered .................................................................................................1-2
3. Serial Number Locations..............................................................................................1-3
4. Main Specifications ......................................................................................................1-4
5. Chassis and Mast Model Identification.........................................................................1-5
6. Dimensions ..................................................................................................................1-6
1
9. GENERAL INFORMATION
1-2
1. Model View
2. Truck Models Covered
This Service Manual applies to the following truck models (common names).
205711
Truck model Transmission
Model code - Serial
number
Engine mounted
FD60
Torque converter drive trans-
mission
F20C-10001-up Mitsubishi S6S diesel engine
FD70
Torque converter drive trans-
mission
F20C-60001-up Mitsubishi S6S diesel engine
10. GENERAL INFORMATION
1-3
3. Serial Number Locations
206500
Diesel-engine serial number Chassis serial number
Mast serial number Name plate Transmission serial number
11. GENERAL INFORMATION
1-4
4. Main specifications
Truck model FD60 FD70
Truck Model Mitsubishi F20C
Type Standard (with 2-speed powershift transmission)
Capacity/load center
6000/600 kgf/mm
(13228/24 lbf/in.)
7000/600 kgf/mm
(15432/24 lbf/in.)
Lift, maximum 3300 mm (130 in.)
Lift speed (unloaded/loaded) 470/440 mm/sec (93/87 fpm)
Lowering speed (unloaded/loaded) 550 mm/sec (108 fpm)
Mast tilt angle (forward-backward) 6˚–12˚
Free lift 205 mm (8.1 in.)
Forward travel speed (1st/2nd)
10/27.5 km/h (6.2/17.1 mph)
Reverse travel speed (1st/2nd)
Minimum turning radius 3310 mm (130.3 in.) 3395 mm (133.7 in.)
Minimum intersecting aisle 3000 mm (118.1 in.) 3050 mm (120 in.)
Front wheel (double-
tire)
Size 8.25-15-12PR (1)
Inflation 0.7MPa (7kgf/cm2
) [101 psi]
Rear wheel
Size 8.25-15-12PR (1)
Inflation 0.7MPa (7kgf/cm2
) [101 psi]
Relief-valve setting of power steering 10.8 MPa (110 kgf/cm2
) [1567 psi]
Relief-valve setting of control valve 19.1 MPa (195 kgf/cm2
) [2770 psi]
Truck weight 8710 kg (19200 lb) 9320 kg (20546 lb)
12. GENERAL INFORMATION
1-5
5. Chassis and Mast Model Identification
[Chassis]
[Mast]
FD 60
Maximum capacity
60: 6000 kg (13228 lb)
70: 7000 kg (15432 lb)
Applicable truck model designation
70: 6,7 ton class
Kind of mast
P: simplex mast
M: triplex mast
Engine type
FD: Diesel engine type
Maximum lifting height
["25" stand for 2500 mm (98.4 in.)]
Order of the minor change
("A" for the original, "B" for the first change,
"C" for the second change, and so on)
Major change
("2" for the original, "3" for the first change,
and so on up to "9")
4 P B
70 25
14. GENERAL INFORMATION
1-7
No. Truck model FD60 FD70
A Maximum lift 3300 mm (130 in.)
B Overall height at maximum lift 4580 mm (180.3 in.)
C
Overall mast height
Height of mast lowered
2720 mm (107.1 in)
D Free lift 205 mm (8.1 in.)
E Fork length 1220 mm (48 in.)
F Fork width 150 mm (5.9 in.)
G Fork thickness 65 mm (2.36 in.)
H1, H2
Mast tilt angle (forward-back-
ward)
6˚–12˚
I Truck length 4805 mm (189.2 in) 4855 mm (191.1 in.)
J Overall width (outside of tires) 2170 mm (85.4 in.)
K Tread (front wheel) 1650 mm (65 in)
L Tread (rear wheel) 1650 mm (65 in)
M Wheelbase 2300 mm (90.6 in)
N Front overhang 586 mm (23 in.)
P Minimum height from ground 265 mm (10.4 in.)
R Minimum radius 3310 mm (130 in) 3395 mm (134 in.)
S Underclearance (at mast) 170 mm (6.7 in.)
T
Underclearance (at counter-
weight)
240 mm (9.5 in.)
U
Overall height (head-guard
height)
2420 mm (95.3 in.)
15. 2-1
1
2
3
4
5
6
7
8
9
10
11
12
13
14
COOLING SYSTEM
1. Specifications ...............................................................................................................2-2
2. Structure.......................................................................................................................2-3
3. Suggestions for Removal and Installation....................................................................2-4
3.1 Removing Fan Belt ............................................................................................................................... 2-4
3.1.1 Suggestions for Removal and Installation................................................................................................... 2-4
3.1.2 Procedure involving removal of counterweight ........................................................................................... 2-6
3.1.3 Suggestions for Removal and installation................................................................................................... 2-7
3.1.4 Installation................................................................................................................................................... 2-7
4. Inspection and Adjustment...........................................................................................2-8
4.1 Inspection of Fan Belt ........................................................................................................................... 2-8
4.2 Fan Belt Tension Adjustment................................................................................................................ 2-8
2
16. Thank you very much
for your reading.
Please Click Here
Then Get More
Information.