Michael Shinneman has over 10 years of experience in maintenance, welding, and HVAC-R installation and repair. His most recent role was as an HVAC-R technician from 2014 to present at Tiger Heating and Cooling, where he installed furnaces and outside condensing units and performed service calls to fix problems. Prior to that, he held maintenance roles from 2007 to 2010 at Zoltek Corporation, where he performed preventative maintenance on machinery like boilers. He also has experience as a welder/mechanic from 2006 to 2007 at Flexway Trucking, where he performed truck and trailer maintenance and welding repairs.

1. Michael Shinneman
20 Teal ST. Pontoon Beach IL, 62040 (618)960-0943 michael_shinneman@yahoo.com
Experience Hvac-R Technician
MAY 2014, Tiger Heating and Cooling, Glen Carbon IL
Hvac-R Technician, Residential installer of furnace and outside condensing units.
Service calls for fix and repair problems on furnace and condensing units. Heat
pump and geothermal maintenance calls. Clean and checks on ac systems.
D.O.T. Medical Examine certificate number 038009512.
Maintenance
April 2007-July 2010, Zoltek Corporation, ST. Charles MO
Preventative Maintenance on all working machinery.(i.e.) boilers and vacuum
pumps and system pump. Change out seals and motors as needed. Perform
welding in and out side of vessels as needed. Pressure check welds and fittings
put on vessel. Perform pm on cooling tower and heat exchangers.
Mill responsibilities-Change out blades and perform pms on hammer mill. Knife
chopper weld new screens in and change out bars as needed. Perform pms on
the auger and dust collector system.
Perform preventative maintenance on chop line. Changing out rollers as needed.
Changing the belt and the wiper bar out. Perform pms and fabricate screens for
the shaker. Making pump stands and installing piping to our io water system.
Changing out chopper heads and performing pms on them.
Welder/Mechanic
July 2006-April 2007, Flexway Trucking, Hazelwood MO
Performing preventative maintenance on all trucks and trailers. Changing oil, oil
filter, air filter, spark plugs and wires, fuel filter. Greasing all u joints and fifth wheel
on the trucks.
Welding on the trailers as needed. Putting in new decking and doors as needed.
Changing out tires and brakes as needed. Running electrical tests on alternator
and running diagnostics on trucks electrical system.
Laborer
April 2004-July 2006, J.E. Jacobs, Decatur IL
Cutting out old piping and repairing machinery as needed.
Putting up scaffolding as needed to get to the job. Using J.L.G. lift and fork trucks
to get parts and machinery to the job site. Working on dust collector and auger
system going threw out mill.
Education Richland Community College, Decatur IL, Graduated in 2005
Welding section IX ASME Boiler and Pressure Codes
Plate: Arc-welding (one G, two G, three G, four G), GMAW (one G, two G), FCAW
(one G, two G)Pipe: three G, four G, and five G, radiograph tests
Vatterott College, Fairview Heights IL, June 2013-June 2014.
HVAC-R diploma, Universal certified.
References References are available on request.