Pilgrim International produces shaft coupling solutions including radial fit bolts. Their radial fit bolts can be installed and removed in 10-15 minutes, faster than traditional shrink fit bolts which require freezing. Radial fit bolts provide a secure, pre-engineered interference fit between coupling flanges with lower lifetime costs than shrink fit bolts which frequently cause damage upon removal.
Hitachi ex400 lc 5 excavator service repair manualfjjskekdmmme
This document provides information and guidelines related to disassembling, assembling, and maintaining excavators. It discusses cleaning and inspecting machines before disassembly, as well as organizing and storing parts. Precautions are outlined for tasks like removing and installing hydraulic components and bleeding air from systems. Guidelines are provided for floating seals, nylon slings, and torque specifications for bolts. Maintenance terminology is defined.
This document provides instructions for dismantling and assembling the safety equipment, specifically the chain brake, on several chain saw models. It describes removing parts like the clutch cover, guide bar, chain, hand guard, brake spring, toggle joint, and bearing pin. It emphasizes checking for wear on parts like the brake band which should be at least 0.8mm thick. Proper lubrication and handling of tensioned parts like the brake spring are also highlighted for safety.
The document describes Weatherford's IntegraLine liner system, which uses swage technology to provide a reliable seal between the liner and casing. It has two main components - the SwageSet packer and polished bore receptacle (PBR). The SwageSet packer uses swage sealing technology and elastomers to form a gas-tight seal against the casing. It can be used in cemented or uncemented liners. The PBR connects to the packer and provides protection during deployment. Together these components maintain well integrity in challenging applications like HPHT wells.
Crown offers three kinds of gauge protectors. The 4:1 debooster gauge protector reduced line pressure by a factor of 4 to 1 and keeps harsh drilling fluids from entering gauge internals. This piston-style gauge protector uses this piston to keep the debooster gauge save and to sense pressure. When the seals wear, they will need to be replaced. Use this easy-to-follow guide and our CKT204 to replace the seals and get back up and running again.
A mechanical seal is a sealing device which forms a running seal between rotating and stationary parts. They were developed to overcome the disadvantages of compression packing. Leakage can be reduced to a level meeting environmental standards of government regulating agencies and maintenance costs can be lower.
Hitachi ex400 lc 5 excavator service repair manualhjsnmdmme
This document provides guidance on precautions for disassembling and assembling construction equipment. It discusses cleaning the machine before disassembly, inspecting components, preparing tools and workspace, and handling parts properly during disassembly and assembly. Specific instructions are provided for bleeding air from hydraulic systems, installing floating seals correctly, using nylon slings safely, and standard terminology for maintenance.
Hitachi ex450 lc 5 excavator service repair manualhjsnmdmme
This document provides guidance on precautions for disassembling and assembling construction equipment. It discusses cleaning the machine before disassembly, inspecting components, preparing tools and workspace, and handling parts properly during disassembly and assembly. Specific instructions are provided for bleeding air from hydraulic systems, installing floating seals correctly, using nylon slings safely, and standard terminology for maintenance.
Hitachi ex400 lc 5 excavator service repair manualfjjskekdmmme
This document provides information and guidelines related to disassembling, assembling, and maintaining excavators. It discusses cleaning and inspecting machines before disassembly, as well as organizing and storing parts. Precautions are outlined for tasks like removing and installing hydraulic components and bleeding air from systems. Guidelines are provided for floating seals, nylon slings, and torque specifications for bolts. Maintenance terminology is defined.
This document provides instructions for dismantling and assembling the safety equipment, specifically the chain brake, on several chain saw models. It describes removing parts like the clutch cover, guide bar, chain, hand guard, brake spring, toggle joint, and bearing pin. It emphasizes checking for wear on parts like the brake band which should be at least 0.8mm thick. Proper lubrication and handling of tensioned parts like the brake spring are also highlighted for safety.
The document describes Weatherford's IntegraLine liner system, which uses swage technology to provide a reliable seal between the liner and casing. It has two main components - the SwageSet packer and polished bore receptacle (PBR). The SwageSet packer uses swage sealing technology and elastomers to form a gas-tight seal against the casing. It can be used in cemented or uncemented liners. The PBR connects to the packer and provides protection during deployment. Together these components maintain well integrity in challenging applications like HPHT wells.
Crown offers three kinds of gauge protectors. The 4:1 debooster gauge protector reduced line pressure by a factor of 4 to 1 and keeps harsh drilling fluids from entering gauge internals. This piston-style gauge protector uses this piston to keep the debooster gauge save and to sense pressure. When the seals wear, they will need to be replaced. Use this easy-to-follow guide and our CKT204 to replace the seals and get back up and running again.
A mechanical seal is a sealing device which forms a running seal between rotating and stationary parts. They were developed to overcome the disadvantages of compression packing. Leakage can be reduced to a level meeting environmental standards of government regulating agencies and maintenance costs can be lower.
Hitachi ex400 lc 5 excavator service repair manualhjsnmdmme
This document provides guidance on precautions for disassembling and assembling construction equipment. It discusses cleaning the machine before disassembly, inspecting components, preparing tools and workspace, and handling parts properly during disassembly and assembly. Specific instructions are provided for bleeding air from hydraulic systems, installing floating seals correctly, using nylon slings safely, and standard terminology for maintenance.
Hitachi ex450 lc 5 excavator service repair manualhjsnmdmme
This document provides guidance on precautions for disassembling and assembling construction equipment. It discusses cleaning the machine before disassembly, inspecting components, preparing tools and workspace, and handling parts properly during disassembly and assembly. Specific instructions are provided for bleeding air from hydraulic systems, installing floating seals correctly, using nylon slings safely, and standard terminology for maintenance.
This document provides information on Pilgrim International Limited, a company that designs and manufactures hydraulic bolting solutions. It discusses Pilgrim's history of innovation over 60+ years, their product offerings including hydraulic radial fit bolts and coupling hole alignment tools, benefits of their bolting systems, life cycle cost savings, installation/removal processes, and technical specifications. It aims to showcase Pilgrim as the global leader in hydraulic bolting technology for industries such as power, marine, oil/gas, and more.
This document provides guidelines for the installation, operation, and maintenance of a torque flow pump. It includes details on construction features, storage, installation instructions, operation, troubleshooting, maintenance, and spare parts. The installation section specifies how to check for transit damage, prepare the foundation, properly mount and level the pump, align the coupling, grout the base, and connect the suction and discharge piping. Proper installation and adherence to the maintenance procedures will allow the pump to provide long, trouble-free service.
WOM’s Floating Ball Valves provide the user with an exceedingly reliable and proven design offering maximum sealing against leaks. WOM’s Floating Ball Valves have separate ball and stem design with a free floating ball preloaded between the seats during assembly.
WOM Group provides Floating Ball Valves with an exceedingly reliable and proven design offering maximum sealing against leaks. They have separate ball and stem design with a free floating ball preloaded between the seats during assembly.
WOM manufactures floating ball valves that provide reliable sealing against leaks. The valves have a separate ball and stem design, where the ball floats freely under pressure to seal on the downstream side. This creates a pressure assisted seal. The valves are suitable for oil and gas, chemical, and pharmaceutical applications over a wide temperature range. Key features include fire-safe metal sealing if polymer seats burn, blowout proof stem design, and multiple seals to prevent leakage.
How to Improve Steam Turbine Head Rate and Increase OutputMargaret Harrison
As the steam path degrades in mature steam turbines performance loss often occurs. Reducing heat rate while increasing output can have a significant impact on earning potential within the current market and today’s regulatory conditions. Improvements of 3% or more have been seen by users who have installed the full package of steam turbine seals in their units. EthosEnergy has been developing advanced turbine sealing technologies that improve efficiency and performance of steam turbines for over 30 years.
Short Course 6- Mechanical Seals and Sealing Systems.pdfyusuf699644
The document provides information about mechanical seals and sealing systems. It begins with an introduction to the presenter, Simon Smith, including his qualifications and experience. It then discusses the basics of sealing pumps, including the use of packing rings and mechanical seals. Several types of mechanical seals are described in detail, such as single pusher seals, bellows seals, and dual seals. Finally, common seal piping plans like Plans 11, 12, and 13 are explained in regards to how they provide flushing and lubrication to mechanical seals.
The document discusses the fundamentals of mechanical seals used in pumps. It describes how mechanical seals work to prevent leaks by creating a close fit between a stationary and rotating seal surface. It covers the basic components of mechanical seals including primary sealing elements, secondary sealing elements, and hardware. It also discusses seal face materials, designs, installation, operation, and ways to control the seal environment through flushing, cooling, and heating.
2015 PT. SEM introduction presentation.pptxDarrenWijaya5
This document discusses hydraulic and pneumatic cylinder solutions provided by PT Sumatera Ega Mekinka. It provides explanations for why newly manufactured cylinders typically last longer than refurbished cylinders, focusing on the importance of seal life and condition. The document outlines considerations for rebuilding cylinders, including general condition, concentricity, fits, surface finishes, and more. It also discusses the benefits of re-honing and re-hard chrome plating cylinders during refurbishment. The company history and services are described, including customized cylinder design and a cylinder contract service program. Successful projects for various industry customers are listed.
CHALLENGES AND CORRECTION OF MECHANICAL SEAL LEAK FULL CONTACT RING.pptxLEAK-PACK
Use of Mechanical Seals, which confines product leakage across the pump shaft with two extremely flat surfaces. visit: https://leakpack.com/challenges-correction-mechanical-seal-leak-full-contact-ring/
Read how Superbolt improves and resolves your bolting problems for rotating equipment
Superbolt™ Multi Jackbolts Tensioner (USA):
- Used commonly in Rotating & Heavy Duty Equipment; Pumps, Compressors, Turbines, Valves, and etc.
- Useful for Larger size bolts, from M24 onwards, as only Hand Tools are required during tightening & removal
- Eliminates Galling, Fretting and Bolt Seizure Problems
- Reduce equipment downtime and improves work efficiency
- Increase SAFETY aspect
- Preload Accuracy +/- 10%
The document discusses bolting solutions from Nord-Lock Group, specifically their Superbolt tensioners. Superbolt tensioners provide a safe and efficient way to tighten bolted joints on compressors through the use of wedge-locking technology. They can be used on applications such as piston end nuts, crosshead jamnuts, connecting rod nuts, and anchor bolts where high torque requirements previously required dangerous tools or took a long time. Superbolt tensioners allow bolted joints to be tightened quickly and accurately using only hand tools.
Hitachi ex750 5 excavator service repair manualfjjskdmnenemm
This document provides information on disassembling and assembling procedures for an excavator. It contains three sections: precautions for disassembling and assembling, bleeding air from the hydraulic system, and floating seal precautions. The key points are:
- Thoroughly clean and inspect the machine before disassembling. Drain fluids, tag parts, and store tools and disassembled parts orderly.
- When reassembling, clean all parts, replace seals, apply grease, and ensure surfaces are clean. Bleed air from the hydraulic system after refilling fluid.
- Floating seals must be installed parallel to mounting bores to prevent leakage, with dust removed from surfaces.
This document provides instructions for installing Duo-Cone seals correctly to reduce leaks or failures. It describes the components of a Duo-Cone seal, including the seal ring and rubber toric. Guidelines are provided for cleaning, handling, inspecting, and storing the seals and components. The document emphasizes maintaining cleanliness to prevent contamination and describes approved cleaning products and inspection procedures.
Gasket failure through crushing is a common problem that can lead to leaks and unplanned maintenance. While sophisticated torquing equipment is often used, achieving proper torque is difficult due to various factors. A better solution is improving gasket design. The article describes a new gasket design called a "fishbone gasket" that features rounded ribs and integral stop-steps to prevent over-compression of the gasket material and eliminate crushing. Laboratory tests found this design achieved better crush resistance and sealing performance compared to traditional spiral-wound and camprofile gasket designs. The stop-step concept could also be applied to other gasket types to improve reliability.
Hitachi ex800 h 5 excavator service repair manualjmdms eekduui
This document provides instructions and guidelines for disassembling and assembling heavy machinery. It discusses cleaning and inspecting components, using matching marks, storing parts properly, and checking for wear. Bleeding air from hydraulic systems is described. Instructions are provided for installing floating seals and o-rings correctly. Guidelines are given for tightening bolts, such as using the proper torque and tightening order.
HITACHI EX750-5 EXCAVATOR Service Repair Manualhjksmmmdm
This is the Highly Detailed factory service repair manual for theHITACHI EX750-5 EXCAVATOR, this Service Manual has detailed illustrations as well as step by step instructions,It is 100 percents complete and intact. they are specifically written for the do-it-yourself-er as well as the experienced mechanic.HITACHI EX750-5 EXCAVATOR Service Repair Workshop Manual provides step-by-step instructions based on the complete dis-assembly of the machine. It is this level of detail, along with hundreds of photos and illustrations, that guide the reader through each service and repair procedure. Complete download comes in pdf format which can work under all PC based windows operating system and Mac also, All pages are printable. Using this repair manual is an inexpensive way to keep your vehicle working properly.
Workshop Manual Covers:
General Information
Upperstructure
Undercarriage
Front Attachment
Technical Manual Covers:
General
System
Component Operation
Operational Performance Test
Troubleshooting
Electrical Circuit Diagram
Hydraulic Circuit Diagram
Engine Harness
Relay Harness
Cab Harness
File Format: PDF
Compatible: All Versions of Windows & Mac
Language: English
Requirements: Adobe PDF Reader
NO waiting, Buy from responsible seller and get INSTANT DOWNLOAD, Without wasting your hard-owned money on uncertainty or surprise! All pages are is great to haveHITACHI EX750-5 EXCAVATOR Service Repair Workshop Manual.
Looking for some other Service Repair Manual,please check:
https://www.aservicemanualpdf.com/
Thanks for visiting!
8
Hitachi ex750 5 excavator service repair manualjmdms eekduui
This document provides instructions and guidelines for disassembling and assembling heavy machinery. It discusses cleaning and inspecting components, using matching marks, storing parts properly, and checking for wear. Specific instructions are given for bleeding air from hydraulic systems and installing floating seals correctly. Guidelines are also provided for tightening bolts, such as using the proper torque and tightening order.
HITACHI EX750-5 EXCAVATOR Service Repair Manualjksmend skjdkmd
This is the Highly Detailed factory service repair manual for theHITACHI EX750-5 EXCAVATOR, this Service Manual has detailed illustrations as well as step by step instructions,It is 100 percents complete and intact. they are specifically written for the do-it-yourself-er as well as the experienced mechanic.HITACHI EX750-5 EXCAVATOR Service Repair Workshop Manual provides step-by-step instructions based on the complete dis-assembly of the machine. It is this level of detail, along with hundreds of photos and illustrations, that guide the reader through each service and repair procedure. Complete download comes in pdf format which can work under all PC based windows operating system and Mac also, All pages are printable. Using this repair manual is an inexpensive way to keep your vehicle working properly.
Workshop Manual Covers:
General Information
Upperstructure
Undercarriage
Front Attachment
Technical Manual Covers:
General
System
Component Operation
Operational Performance Test
Troubleshooting
Electrical Circuit Diagram
Hydraulic Circuit Diagram
Engine Harness
Relay Harness
Cab Harness
File Format: PDF
Compatible: All Versions of Windows & Mac
Language: English
Requirements: Adobe PDF Reader
NO waiting, Buy from responsible seller and get INSTANT DOWNLOAD, Without wasting your hard-owned money on uncertainty or surprise! All pages are is great to haveHITACHI EX750-5 EXCAVATOR Service Repair Workshop Manual.
Looking for some other Service Repair Manual,please check:
https://www.aservicemanualpdf.com/
Thanks for visiting!
HITACHI EX800H-5 EXCAVATOR Service Repair Manualhjsedmsmem
This is the Highly Detailed factory service repair manual for theHITACHI EX800H-5 EXCAVATOR, this Service Manual has detailed illustrations as well as step by step instructions,It is 100 percents complete and intact. they are specifically written for the do-it-yourself-er as well as the experienced mechanic.HITACHI EX800H-5 EXCAVATOR Service Repair Workshop Manual provides step-by-step instructions based on the complete dis-assembly of the machine. It is this level of detail, along with hundreds of photos and illustrations, that guide the reader through each service and repair procedure. Complete download comes in pdf format which can work under all PC based windows operating system and Mac also, All pages are printable. Using this repair manual is an inexpensive way to keep your vehicle working properly.
Workshop Manual Covers:
General Information
Upperstructure
Undercarriage
Front Attachment
Technical Manual Covers:
General
System
Component Operation
Operational Performance Test
Troubleshooting
Electrical Circuit Diagram
Hydraulic Circuit Diagram
Engine Harness
Relay Harness
Cab Harness
File Format: PDF
Compatible: All Versions of Windows & Mac
Language: English
Requirements: Adobe PDF Reader
NO waiting, Buy from responsible seller and get INSTANT DOWNLOAD, Without wasting your hard-owned money on uncertainty or surprise! All pages are is great to haveHITACHI EX800H-5 EXCAVATOR Service Repair Workshop Manual.
Looking for some other Service Repair Manual,please check:
https://www.aservicemanualpdf.com/
Thanks for visiting!
8
This document provides information on Pilgrim International Limited, a company that designs and manufactures hydraulic bolting solutions. It discusses Pilgrim's history of innovation over 60+ years, their product offerings including hydraulic radial fit bolts and coupling hole alignment tools, benefits of their bolting systems, life cycle cost savings, installation/removal processes, and technical specifications. It aims to showcase Pilgrim as the global leader in hydraulic bolting technology for industries such as power, marine, oil/gas, and more.
This document provides guidelines for the installation, operation, and maintenance of a torque flow pump. It includes details on construction features, storage, installation instructions, operation, troubleshooting, maintenance, and spare parts. The installation section specifies how to check for transit damage, prepare the foundation, properly mount and level the pump, align the coupling, grout the base, and connect the suction and discharge piping. Proper installation and adherence to the maintenance procedures will allow the pump to provide long, trouble-free service.
WOM’s Floating Ball Valves provide the user with an exceedingly reliable and proven design offering maximum sealing against leaks. WOM’s Floating Ball Valves have separate ball and stem design with a free floating ball preloaded between the seats during assembly.
WOM Group provides Floating Ball Valves with an exceedingly reliable and proven design offering maximum sealing against leaks. They have separate ball and stem design with a free floating ball preloaded between the seats during assembly.
WOM manufactures floating ball valves that provide reliable sealing against leaks. The valves have a separate ball and stem design, where the ball floats freely under pressure to seal on the downstream side. This creates a pressure assisted seal. The valves are suitable for oil and gas, chemical, and pharmaceutical applications over a wide temperature range. Key features include fire-safe metal sealing if polymer seats burn, blowout proof stem design, and multiple seals to prevent leakage.
How to Improve Steam Turbine Head Rate and Increase OutputMargaret Harrison
As the steam path degrades in mature steam turbines performance loss often occurs. Reducing heat rate while increasing output can have a significant impact on earning potential within the current market and today’s regulatory conditions. Improvements of 3% or more have been seen by users who have installed the full package of steam turbine seals in their units. EthosEnergy has been developing advanced turbine sealing technologies that improve efficiency and performance of steam turbines for over 30 years.
Short Course 6- Mechanical Seals and Sealing Systems.pdfyusuf699644
The document provides information about mechanical seals and sealing systems. It begins with an introduction to the presenter, Simon Smith, including his qualifications and experience. It then discusses the basics of sealing pumps, including the use of packing rings and mechanical seals. Several types of mechanical seals are described in detail, such as single pusher seals, bellows seals, and dual seals. Finally, common seal piping plans like Plans 11, 12, and 13 are explained in regards to how they provide flushing and lubrication to mechanical seals.
The document discusses the fundamentals of mechanical seals used in pumps. It describes how mechanical seals work to prevent leaks by creating a close fit between a stationary and rotating seal surface. It covers the basic components of mechanical seals including primary sealing elements, secondary sealing elements, and hardware. It also discusses seal face materials, designs, installation, operation, and ways to control the seal environment through flushing, cooling, and heating.
2015 PT. SEM introduction presentation.pptxDarrenWijaya5
This document discusses hydraulic and pneumatic cylinder solutions provided by PT Sumatera Ega Mekinka. It provides explanations for why newly manufactured cylinders typically last longer than refurbished cylinders, focusing on the importance of seal life and condition. The document outlines considerations for rebuilding cylinders, including general condition, concentricity, fits, surface finishes, and more. It also discusses the benefits of re-honing and re-hard chrome plating cylinders during refurbishment. The company history and services are described, including customized cylinder design and a cylinder contract service program. Successful projects for various industry customers are listed.
CHALLENGES AND CORRECTION OF MECHANICAL SEAL LEAK FULL CONTACT RING.pptxLEAK-PACK
Use of Mechanical Seals, which confines product leakage across the pump shaft with two extremely flat surfaces. visit: https://leakpack.com/challenges-correction-mechanical-seal-leak-full-contact-ring/
Read how Superbolt improves and resolves your bolting problems for rotating equipment
Superbolt™ Multi Jackbolts Tensioner (USA):
- Used commonly in Rotating & Heavy Duty Equipment; Pumps, Compressors, Turbines, Valves, and etc.
- Useful for Larger size bolts, from M24 onwards, as only Hand Tools are required during tightening & removal
- Eliminates Galling, Fretting and Bolt Seizure Problems
- Reduce equipment downtime and improves work efficiency
- Increase SAFETY aspect
- Preload Accuracy +/- 10%
The document discusses bolting solutions from Nord-Lock Group, specifically their Superbolt tensioners. Superbolt tensioners provide a safe and efficient way to tighten bolted joints on compressors through the use of wedge-locking technology. They can be used on applications such as piston end nuts, crosshead jamnuts, connecting rod nuts, and anchor bolts where high torque requirements previously required dangerous tools or took a long time. Superbolt tensioners allow bolted joints to be tightened quickly and accurately using only hand tools.
Hitachi ex750 5 excavator service repair manualfjjskdmnenemm
This document provides information on disassembling and assembling procedures for an excavator. It contains three sections: precautions for disassembling and assembling, bleeding air from the hydraulic system, and floating seal precautions. The key points are:
- Thoroughly clean and inspect the machine before disassembling. Drain fluids, tag parts, and store tools and disassembled parts orderly.
- When reassembling, clean all parts, replace seals, apply grease, and ensure surfaces are clean. Bleed air from the hydraulic system after refilling fluid.
- Floating seals must be installed parallel to mounting bores to prevent leakage, with dust removed from surfaces.
This document provides instructions for installing Duo-Cone seals correctly to reduce leaks or failures. It describes the components of a Duo-Cone seal, including the seal ring and rubber toric. Guidelines are provided for cleaning, handling, inspecting, and storing the seals and components. The document emphasizes maintaining cleanliness to prevent contamination and describes approved cleaning products and inspection procedures.
Gasket failure through crushing is a common problem that can lead to leaks and unplanned maintenance. While sophisticated torquing equipment is often used, achieving proper torque is difficult due to various factors. A better solution is improving gasket design. The article describes a new gasket design called a "fishbone gasket" that features rounded ribs and integral stop-steps to prevent over-compression of the gasket material and eliminate crushing. Laboratory tests found this design achieved better crush resistance and sealing performance compared to traditional spiral-wound and camprofile gasket designs. The stop-step concept could also be applied to other gasket types to improve reliability.
Hitachi ex800 h 5 excavator service repair manualjmdms eekduui
This document provides instructions and guidelines for disassembling and assembling heavy machinery. It discusses cleaning and inspecting components, using matching marks, storing parts properly, and checking for wear. Bleeding air from hydraulic systems is described. Instructions are provided for installing floating seals and o-rings correctly. Guidelines are given for tightening bolts, such as using the proper torque and tightening order.
HITACHI EX750-5 EXCAVATOR Service Repair Manualhjksmmmdm
This is the Highly Detailed factory service repair manual for theHITACHI EX750-5 EXCAVATOR, this Service Manual has detailed illustrations as well as step by step instructions,It is 100 percents complete and intact. they are specifically written for the do-it-yourself-er as well as the experienced mechanic.HITACHI EX750-5 EXCAVATOR Service Repair Workshop Manual provides step-by-step instructions based on the complete dis-assembly of the machine. It is this level of detail, along with hundreds of photos and illustrations, that guide the reader through each service and repair procedure. Complete download comes in pdf format which can work under all PC based windows operating system and Mac also, All pages are printable. Using this repair manual is an inexpensive way to keep your vehicle working properly.
Workshop Manual Covers:
General Information
Upperstructure
Undercarriage
Front Attachment
Technical Manual Covers:
General
System
Component Operation
Operational Performance Test
Troubleshooting
Electrical Circuit Diagram
Hydraulic Circuit Diagram
Engine Harness
Relay Harness
Cab Harness
File Format: PDF
Compatible: All Versions of Windows & Mac
Language: English
Requirements: Adobe PDF Reader
NO waiting, Buy from responsible seller and get INSTANT DOWNLOAD, Without wasting your hard-owned money on uncertainty or surprise! All pages are is great to haveHITACHI EX750-5 EXCAVATOR Service Repair Workshop Manual.
Looking for some other Service Repair Manual,please check:
https://www.aservicemanualpdf.com/
Thanks for visiting!
8
Hitachi ex750 5 excavator service repair manualjmdms eekduui
This document provides instructions and guidelines for disassembling and assembling heavy machinery. It discusses cleaning and inspecting components, using matching marks, storing parts properly, and checking for wear. Specific instructions are given for bleeding air from hydraulic systems and installing floating seals correctly. Guidelines are also provided for tightening bolts, such as using the proper torque and tightening order.
HITACHI EX750-5 EXCAVATOR Service Repair Manualjksmend skjdkmd
This is the Highly Detailed factory service repair manual for theHITACHI EX750-5 EXCAVATOR, this Service Manual has detailed illustrations as well as step by step instructions,It is 100 percents complete and intact. they are specifically written for the do-it-yourself-er as well as the experienced mechanic.HITACHI EX750-5 EXCAVATOR Service Repair Workshop Manual provides step-by-step instructions based on the complete dis-assembly of the machine. It is this level of detail, along with hundreds of photos and illustrations, that guide the reader through each service and repair procedure. Complete download comes in pdf format which can work under all PC based windows operating system and Mac also, All pages are printable. Using this repair manual is an inexpensive way to keep your vehicle working properly.
Workshop Manual Covers:
General Information
Upperstructure
Undercarriage
Front Attachment
Technical Manual Covers:
General
System
Component Operation
Operational Performance Test
Troubleshooting
Electrical Circuit Diagram
Hydraulic Circuit Diagram
Engine Harness
Relay Harness
Cab Harness
File Format: PDF
Compatible: All Versions of Windows & Mac
Language: English
Requirements: Adobe PDF Reader
NO waiting, Buy from responsible seller and get INSTANT DOWNLOAD, Without wasting your hard-owned money on uncertainty or surprise! All pages are is great to haveHITACHI EX750-5 EXCAVATOR Service Repair Workshop Manual.
Looking for some other Service Repair Manual,please check:
https://www.aservicemanualpdf.com/
Thanks for visiting!
HITACHI EX800H-5 EXCAVATOR Service Repair Manualhjsedmsmem
This is the Highly Detailed factory service repair manual for theHITACHI EX800H-5 EXCAVATOR, this Service Manual has detailed illustrations as well as step by step instructions,It is 100 percents complete and intact. they are specifically written for the do-it-yourself-er as well as the experienced mechanic.HITACHI EX800H-5 EXCAVATOR Service Repair Workshop Manual provides step-by-step instructions based on the complete dis-assembly of the machine. It is this level of detail, along with hundreds of photos and illustrations, that guide the reader through each service and repair procedure. Complete download comes in pdf format which can work under all PC based windows operating system and Mac also, All pages are printable. Using this repair manual is an inexpensive way to keep your vehicle working properly.
Workshop Manual Covers:
General Information
Upperstructure
Undercarriage
Front Attachment
Technical Manual Covers:
General
System
Component Operation
Operational Performance Test
Troubleshooting
Electrical Circuit Diagram
Hydraulic Circuit Diagram
Engine Harness
Relay Harness
Cab Harness
File Format: PDF
Compatible: All Versions of Windows & Mac
Language: English
Requirements: Adobe PDF Reader
NO waiting, Buy from responsible seller and get INSTANT DOWNLOAD, Without wasting your hard-owned money on uncertainty or surprise! All pages are is great to haveHITACHI EX800H-5 EXCAVATOR Service Repair Workshop Manual.
Looking for some other Service Repair Manual,please check:
https://www.aservicemanualpdf.com/
Thanks for visiting!
8
1. Pilgrim International Limited
Southlink, Oldham OL4 1DE, UK
Tel: +44 (0) 161 785 7700
Fax: +44 (0) 161 785 7777
Email: sales@pilgrim-international.co.uk
www.pilgrim-international.co.uk
MARINEMarine
Faster to install, safer and easier to handle
PIONEERING COUPLING TECHNOLOGY
Major life cycle benefits
2. SHAFT COUPLING SOLUTIONS
The product of more than sixty years of
development and innovation, Pilgrim Radial Fit
Bolts utilise hydraulically-induced mechanical
expansion to deliver significant benefits over
conventional shrink-fit bolts.
Used extensively throughout the world by the
marine, power and oil industries, our coupling
bolt systems are backed by the most stringent
quality control procedures and the highest
standards of service.
Whatever the application, we have the skills and
resources to design, manufacture and supply
solutions that are at the very forefront of
coupling technology.
> Radial Fit Bolts
> Morgrip bolt
> Other bolting solutions
> Hydraulic nuts
> Marine ringjacks
> Oil injection systems
> Hydraulic pumps (hand and air driven)
> Full range of support services
Faster to install and remove
Safer and easier to handle - no bolt freezing
Significantly lower life cycle costs
Last the complete life of the vessel
No re-machining
Newbuild or direct retrofit
Reliability means more effective planning
OEM approval
VLCC with ABS Classification installed
with Pilgrim Radial Fit Bolts at the engine
to 1st intermediate coupling flange
An innovative alternative to traditional shrink-fit bolts
For data sheets please visit: www.pilgrim-international.co.uk 3
THE WORLD’S MOST ADVANCED PROPULSION
Pilgrim Radial Fit Bolts
Can be installed in 10-15 minutes
and removed just as quickly
2
3. THE PROBLEMS ASSOCIATED
WITH TRADITIONAL
SHRINK FIT BOLTS
Installed at the face-to-face coupling flanges
used to connect the different sections of the
propulsion shaft, Pilgrim Radial Fit Bolts are
fitted and removed in just ten – fifteen minutes.
The complete installation and removal
processes are extremely reliable and
predictable, allowing resources and engineering
time to be accurately forecast.
Unlike traditional bolts, Pilgrim Radial Fit Bolts
are not over-sized – they fit in the hole, no
shrinkage is necessary. As will be appreciated,
this is a huge advantage.
The Radial Fit Bolts themselves consist of a
tapered bolt and an internally tapered sleeve.
When the bolt is hydraulically pulled into the
sleeve, the outer diameter of the sleeve is
forced to expand inside the hole and form a
pre-engineered interference/pressure fit. The
bolt is then hydraulically tensioned to provide
a pre-determined secure clamping force,
pulling the two flanges together.
Example of the problems
that can occur using
shrink fit bolts
Varied and inaccurate clamping forces
Bolt holes often damaged on removal
Bolts often destroyed during removal
Can be hazardous to handle
Difficult to plan the engineering time and resources
High potential for operating delays
Recurring problems – whenever shrink fit bolts are removed and re-installed
Varied and inaccurate interference levels
Traditional shrink fit bolts are manufactured with
an outer diameter that is larger than the
coupling hole. This means they first have to be
frozen in liquid NO2 or dry ice and alcohol until
the outer diameter reduces sufficiently to allow
the bolt to be inserted in the hole.
As the shrink fit bolt returns to its normal
temperature it expands back to its normal size. The
result: an interference fit is formed.
Installation of shrink fit bolts can be difficult and at
times hazardous. With a typical clearance condition
of 0.01mm to 0 0.04mm, internal alignment of the
bolt has to be perfect otherwise the bolt can
become stuck or only partially inserted into the hole
- a frequent occurrence.
Removal of shrink fit bolts during a tailshaft survey,
bearing inspection or general shaft maintenance
programme can be equally problematic, with many
bolts breaking. When this happens, the bolts have
to be drilled out and the holes re-bored, honed and
made ready to receive new bolts.
As a ‘critical pathline’ component, operational
delays often occur as a result of shrink fit bolt
problems. New bolts have to be sourced and
modified drawings have to be approved by Class –
resulting in a costly process that can lose hundreds
of thousands of dollars per year across a fleet.
This can be avoided by using Pilgrim’s advanced
coupling bolt technology.
For data sheets please visit: www.pilgrim-international.co.uk
THE INNOVATIVE, TECHNICALLY
PROVEN SOLUTIONS
DEVELOPED BY PILGRIM
Damaged shrink fit bolt
after removal
4 5
4. ADVANTAGES TO SHIP YARDS
> Faster installation
> Less hazardous – no freezing,
easier handling
> Easy removal and re-installation to
correct shaft line mis-alignment
> Accurate, secure pre-engineered
interference fit and clamping
loads across flanges
ADVANTAGES TO SHIP OWNERS
> Faster tailshaft surveys
> Fully re-usable for entire life of vessel
> Virtually eliminates the need for
secondary engineering to the shaftline
ADVANTAGES TO SHIP MANAGERS
> Operating time maximised
> Virtually no need for
secondary engineering
> Reduced maintenance budget
> Eliminates the difficulties associated
with bolt removal
> Makes planning of central docking
schedules easier
> Accurate, secure, pre-engineered
interference fit and clamping loads
across flanges
ENGINEERING LIFE CYCLE
COST COMPARISON
Engineering life cycle costs comparing
the use of Pilgrim Radial Fit Bolts with
traditional shrink fit bolts.
Case example:
Installation to an Aframax tanker, at both
the ‘Eng to Int’ and ‘Int to Prop’ flanges,
with 12 bolts fitted to each coupling flange.
Class required ‘Tailshaft Surveys’ every
five years.
Over a twenty-year period the estimated
saving to the ship owner/manager is in
the region of US$70,000. This excludes
the loss of operating time and
subsequent loss of revenue.
For data sheets please visit: www.pilgrim-international.co.uk
30000
25000
20000
15000
10000
5000
0
Pilgrim Radial Fit Bolt Shrink fit bolt
TYPICALCOST(US$)
Pilgrim Radial Fit Bolt Shrink fit bolt
Bolt removal time for 24 bolts at US$200/hr 400 7200
Hole re-bore at US$200/hole 0 4000
New Bolts 0 8000
Class Costs 0 1000
Freezing at US$ 100/bolt 0 2000
Installation time for 24 bolts at US$200/hr 600 4000
Engineering cost of removal and re-installation by coupling bolt type
6 7
5. DE-TENSIONING THE BOLT
The tensioning bridge is fitted over the same nut,
which was tightened during the tensioning of the
bolt. A hydraulic force is introduced using the
hydraulic head. Whilst under load, the nut under
the tensioning bridge is released 2 full turns using
the tommy bar. After which, the pressure can be
released and both the tensioning bridge and
hydraulic head can be removed.
OIL INJECTION
The oil injection adaptor is screwed into the oil
injection port on the Radial Fit Bolt, and tightened
firmly. A suitable hose and oil pump is then
connected to the oil injection adaptor. Increasing
oil pressure is then introduced into the Radial Fit
Bolt assembly until the sleeve and bolt separate.
After the release occurs the hydraulic hose and
pump can be disconnected. The oil injector
removed. Both securing nuts on the Radial Fit
Bolt assembly can be removed.
WITHDRAWAL OF THE BOLT
After oil injection the original clearance condition
between the coupling hole and the sleeve returns.
The Radial Fit Bolt and sleeve can now be easily
withdrawn from the coupling hole.
The coupling hole, Radial Fit Bolt and sleeve are
completely undamaged and can be re-installed.
PILGRIM RADIAL FIT BOLTS
For data sheets please visit: www.pilgrim-international.co.uk
INSERTION OF THE BOLT
The Pilgrim Radial Fit Bolt assembly is composed
of a tapered bolt, an internally tapered sleeve, and
two securing nuts. When the sleeve is placed
over the tapered bolt, the resulting OD is less than
that of the coupling hole (clearance condition).
For a coupling hole dia 100.00mm hole, a typical
clearance condition would be 0.12mm making the
RFB very easy to insert into the coupling hole.
SETTING THE SLEEVE
The setting bridge is placed over the end of the
bolt and is firstly used to locate the position of the
sleeve within the coupling hole. The setting bridge
then holds the sleeve in position whilst the
hydraulic head ‘draws/pulls’ the bolt into the
sleeve. As the bolt is drawn into the sleeve, the
OD of the sleeve is forced to increase. Firstly
occupying the clearance condition within the hole
and then exerting a pressure inside the coupling
hole along the entire contact area between the
sleeve and the hole.
TENSIONING THE BOLT
After setting the sleeve, the securing nuts are
fitted to both ends of the RFB assembly, and
tightened firmly by hand. A tensioning bridge is
then used to bridge over the nut, from the same
end at which the sleeve was set. A hydraulic force
is introduced using the hydraulic head, and whilst
under load the nut under the tensioning bridge is
tightened using a tommy bar. Once tightened, the
pressure can be released and both the tensioning
bridge and hydraulic head are removed, and the
RFB assembly is now fully installed.
INSTALLATION SUMMARY REMOVAL SUMMARY
8 9
6. Bolt removal by oil injection
This entails injecting oil under pressure
between the interface of the bolt and the
sleeve by means of an adaptor that locates
into the bolt end. The adaptor is supplied with
a lens ring, hardened for maximum life,
ensuring the high pressure connection is
sealed effectively and with the minimum
physical effort. The lens also eliminates the
possibility of damage to both the adaptor and
injection port.
Mechanical removal
An alternative mechanical removal facility is
provided with all bolts. Its design allows removal
by oil injection or mechanical means to be
undertaken either simultaneously or individually.
Material specification
All components of Pilgrim Radial Fit Bolts and
bolt tensioning kits are manufactured from Ni
Cr Mo alloy steels.
Sizes
All Radial Fit Bolts are on a ‘made to order’
basis, designed to the exact bespoke
requirements of the coupling flanges into
which they will be installed.
Quality
Pilgrim International Limited operates a quality
control system that conforms to
BS-EN-ISO 9001:2000. The system is regularly
audited by an approved accreditation company.
Inspection and testing
The design, materials and finished product are
comprehensively tested and proven by our
engineers and relevant Classification Society
before despatch.
Safety
All Pilgrim Radial Fit Bolts and ancillary
equipment are designed for safe and simple
use. The ease of bolt installation and removal
eliminates many of the traditional, unsafe
working practices often undertaken when
using conventional bolts.
Helical oil grooves
To facilitate easy removal by oil injection, the
body of the Pilgrim Radial Fit Bolt is machined
with twin helical grooves. These allow the oil
to distribute freely and quickly between the
mating surfaces of the bolt and the sleeve to
achieve efficient separation – the most
effective way of producing an even interface
pressure that ensures the bolts can be taken
out smoothly and quickly.
Hardened taper sleeve
The tapered sleeves are surface hardened to
provide a predictable coefficient of friction
between them and the bolts, improving
resistance to corrosion and allowing the sleeve
to be removed from the bolt more efficiently.
The non-metallic nature of the compound zone
formed on the surface of the sleeve eliminates
pick-up and prevents bolt seizure. When oil is
introduced during the removal process, the
coefficient of friction is reduced to ensure fast
and efficient separation of bolt and sleeve.
Bolt tensioning kit
These can be single or dual operated. They
include all of the necessary components for
fast installation and removal. The dual kit
allows two bolts to be pressurised
simultaneously, further reducing the assembly
and removal time.
GENERAL TECHNICAL INFORMATION
For data sheets please visit: www.pilgrim-international.co.uk
Nom.Hole Thread Nut Nut Bolt Stand Outs Tensioning Gear Max Applied
Diameter Dia Height Axial Load
D T Ø N L L1 L2 L3 L4 L5 Ø M Ø B KN
40 - 44 M 33 x 3.5 58 27 68 52 38 32.0 39 90 83.0 308
45 - 47 M 36 x 4 63 29 73 55 41 34.5 42 98 89.0 360
48 – 51 M 39 x 4 67 32 79 60 44 38.0 45 106 92.0 435
52 – 54 M 42 x 4.5 72 34 84 63 46 40.5 48 113 98.0 500
55 – 58 M 45 x 4.5 76 36 89 67 48 42.5 50 120 104.5 588
59 – 63 M 48 x 5 82 39 97 73 54 46.5 52 127 111.5 660
64 – 68 M 52 x 5 89 42 104 78 57 50.0 54 137 120.5 795
69 - 72 M 56 x 5.5 96 45 111 83 60 53.5 55 147 129.5 924
73 - 78 M 60 x 5.5 102 48 115 88 63 57.0 56 158 139.0 1078
79 - 83 M 64 x 6 109 52 123 94 68 61.5 58 166 147.5 1210
84 - 87 M 68 x 6 116 55 130 99 71 65.0 61 177 157.0 1390
88 - 93 M 72 x 6 122 58 137 104 74 68.5 64 187 166.0 1585
94 - 97 M 76 x 6 130 61 144 109 77 72.0 67 197 176.0 1790
98 - 103 M 80 x 6 137 64 152 116 82 76.0 70 208 185.5 2008
104 - 109 M 85 x 6 147 68 161 123 86 80.5 74 220 198.5 2298
110 - 116 M 90 x 6 155 72 170 129 90 85.0 78 232 209.5 2610
117 - 121 M 95 x 6 164 76 179 136 94 90.0 82 245 222.5 2938
123 - 129 M 100 x 6 172 80 187 142 98 94.5 86 258 234.0 3295
130 - 135 M 105 x 6 182 84 199 152 105 99.5 89 270 246.5 3656
136 - 140 M 110 x 6 190 88 208 158 109 104.0 92 283 258.0 4050
141 - 146 M 115 x 6 199 92 217 165 113 109.0 95 295 270.0 4450
147 - 150 M 120 x 6 208 96 225 171 117 113.5 98 309 282.0 4880
All dimensions shown in millimetres
Where applicable, a combination
of Pilgrim Radial Fit Bolts and
Pilgrim Clamp Bolts can be used.
The sizes shown in the table are
for the standard range of Pilgrim
Radial Fit Bolts and are intended
for guidance only. Special
designs are available to suit
customers’ requirements.
10 11
7. MORGRIP MARINE BOLT
A hydraulically actuated bolt
designed to provide fast,
cost-effective and trouble-free
installation and removal.
The Morgrip provides a stark
contrast to the installation of
traditional shrink fit bolts, which
often cause scoring of both the hole
and the bolt surface. The Morgrip
bolt, on the other hand, can be
repeatedly installed and removed
quickly without damage to either the
bolt or the hole.
The principle on which the bolt
works is based on Poisson's ratio,
which establishes that when a round
steel component is stretched within
its elastic limit, it's diameter will
reduce by a known amount.
The principle and design of the
Morgrip bolt is universally accepted
and approved by all major
classification societies.
The stretching force is applied through a
hardened steel rod located down the
centre of the bolt. Operating gear is
screwed on to the head of the bolt. When
pressurised, this exerts a force through
the rod to stretch the bolt. As the bolt
stretches in length it contracts in
diameter according to Poisson's ratio.
Once pressurised, the bolt can be clearance
installed in the hole. A nut is attached (if a
through-hole application) and nipped tight.
The pressure is then released to bring about
a reduction in the length of the bolt and a
corresponding increase in its diameter.
The reduction in length achieves an axial
clamping load as the increase in diameter
simultaneously achieves a fitted condition.
The bolt is now ready for service. It can be
installed remotely from the pump unit by
using the stop valve fitted to the operating
gear to lock in hydraulic pressure. Removal
is the reversal of this procedure.
INSTALLATION AND
REMOVAL
BENEFITS
Cost effective
Approved
Fast installation
Reliable
Custom design
Easy removal
For data sheets please visit: www.pilgrim-international.co.uk12 13
8. MARINE HYDRAULIC NUTS
The Pilgrim hydraulic nut has become the
marine industry standard for fitting
propellers, providing a quick, safe and
cost-effective installation solution. It is also
used extensively for tiller, rudder and
stabiliser applications where precise high
loading is required.
The hydraulic pressure required by the Pilgrim
nut is provided by the Morpress 10 pump.
When the pressure is applied, the piston of the
Pilgrim nut extends, pushing the propeller or
rudder along the tapered shaft. The applied
pressure and travel of the piston correspond to
the required push-up distance of the application.
As well as by oil injection techniques, removal
of propellers and rudders can be simplified by
reversing the Pilgrim Nut and using Pilgrim
withdrawal equipment to pull the propeller or
rudder off the taper.
The design principle of the Pilgrim Nut is
universally accepted and approved by all
major classification societies.
MARINE RINGJACKS
Propeller and rudder applications
The Pilgrim hydraulic ringjack has been
designed and developed to facilitate the
smooth assembly of taper mounted
propellers, tillers, pintles and rudderstocks.
It is of robust construction and incorporates
a high pressure sealing system.
The ringjack's compact design is suitable for
mounting on to the screwed nut of a typical
propulsion or steering assembly to provide
axial push-up and final positioning. The
Morpress 10 pump is the ideal means of
providing the hydraulic pressure required by
the ringjack. When hydraulic pressure is
applied, the piston of the ringjack extends, in
the process pushing the propeller or rudder
along the tapered shaft. The applied pressure
and travel of the piston corresponds to the
required push-up distance of the application.
The Pilgrim ringjack can be supplied either
plain bored or threaded and designed to suit
the dimension requirement of customers.
The standard range of sizes incorporates
245mm to 720mm bore.
BENEFITS
Compact
Reliable
Approved
Adaptable
Precise
Support
Robust
For data sheets please visit: www.pilgrim-international.co.uk
Specials can be designed with:
Modified ports, special materials, special coatings / platings, high pressure applications,
modified nut body, modified threads, modified load rings.
Large Pilgrim Nut: standard sizes PN1 to PN22 (200 to 725mm) bore. Special designs also available.
Pilgrim Nut Shim Type: standard sizes M36 to M220. Special designs also available.
Pilgrim Nut LRL (Locking Collar) Type: standard sizes M36 to M100. Special designs also available.
14 15
9. OIL INJECTION SYSTEM USING
MODIFIED MORPRESS 10 PUMP
Easy to operate, robust and highly cost
effective, the Pilgrim oil injection package is
a complete system for the installation or
removal of a propeller or rudder. Generally
used with Pilgrim nuts or ringjacks, the
system comprises a modified Morpress 10
air driven hydraulic pump incorporating two
hydraulic outlets and gauges, flexible hoses
and self-sealing quick release couplings.
The pump generates a controlled hydraulic
pressure to the Pilgrim nut or ringjack while
injecting oil to the tapered shaft interface of
the propeller or rudder. The use of this oil
during installation ensures that components
are mounted and secured quickly and with
total reliability.
Versatile and incorporating built-in safety
features, the pump has an outstanding track
record of accuracy and dependability.
INSTALLATION AND REMOVAL
The time it takes to remove a propeller or
rudder is greatly reduced by the Pilgrim oil
injection package. An extensive range of other
oil injection packages is also available using
both Morpress 10 air driven pumps and
Pilgrim hand pumps. Get in touch for details.
HYDRAULIC PUMPS
For data sheets please visit: www.pilgrim-international.co.uk
TECHNICAL SPECIFICATION:
Model 525 Model 535 Model 620 Model 640
Hydraulic 0-1700 bar 0-3000 bar 0-1700 bar 0-3000 bar
Output Pressure 0-25000psi 0-40000 psi 0-25000 psi 0-50000 psi
Pressure gauge rating will vary according to customer requirements.
Approx weight with 21.0 kg 21.25 kg 25.2 kg 27.0 kg
empty oil tank
Overall dimensions 380mm x 360mm x 440mm 15ins x 14.2 ins x 17.3 ins
Reservoir capacity 8 litres 1.8 gallons (imp)
MK10 MORPRESS AIR DRIVEN PUMP
The Morpress 10 can be built to your specification. Lower
or higher pressure models, special outlet arrangements
and customised gauges can all be accommodated. Just let
us know your exact requirement.
The standard Morpress 10 comprises an air pressure
regulator, air pressure gauge, air filter/lubricator on/off
control valve, oil reservoir, SC air/oil intensifier unit, oil return
to tank valve, pressure relief safety valve and oil pressure
gauge with damping facility.
Lightweight, efficient, compact and easy to operate, the
Morpress 10 provides instant and totally reliable
hydraulic power.
The pump utilises a low pressure air supply to generate a
high pressure output. This is achieved by means of a
simple differential area system in which a large area air
piston at low pressure produces high pressure on a small
hydraulic piston.
Simple air controls enable the Morpress 10 to provide any
intermediate pressure required within the limits of the pump
outage range.
Both oil and air are filtered prior to entering the system. The
Morpress 10 requires only two connections, one to the air
supply, the other to the hydraulic output. Simple and safe
quick release couplings and high pressure flexible hoses
are used to connect the equipment being used.
Made to order
TYPICAL PILGRIM OIL INJECTION PACKAGE
Morpress pump with twin hydraulic outlets
16 17
TECHNICAL SPECIFICATION:
1600 Bar 2400 Bar
Safe working capacity 1600 bar 2400 bar
Oil tank capacity 2.10 L 2.10 L
Usable Oil 1.7 L 1.7 L
Output per stroke 20/0.8 cm2 20/0.8 cm2
Weight 10 kg 10 kg
HIGH PRESSURE HAND PUMP
10. TECHNICAL SUPPORT
Pilgrim provide a complete range of technical and
training services. These include on-site installation
support, comprehensive installation manuals and
spare parts either from stock or with very fast
delivery times.
Our reputation for safety and reliability, built up over
many years, is the result of the integrity of our bolts and
components and the thoroughness of the assistance
and guidance we offer to both managers and installers.
At every stage of a project we ensure that you have all
of the help you need.
To maintain the smooth and continuous operation of
essential equipment, we recommend and undertake
in-house refurbishment of all tooling including complete
bolt tensioning kits, hydraulic heads and air-operated
pump units.
The Abacus Training Kit has been developed to provide
vital knowledge of Pilgrim Radial Fit Bolt installation and
removal techniques without having to access the
shaftline itself.
Suitable for use in both training facilities and
workshops, the kit quickly instils confidence and
understanding of essential procedures. It is ideal for
either refresher or pre-installation training, where it
ensures that everything runs smoothly during work on
the actual shaftline.
Lightweight and easy to handle, the kit comprises a
Pilgrim Radial Fit Bolt assembly, a steel block with a
hole to simulate the coupling hole, a complete bolt
tensioning kit and a high pressure hand pump.
ABACUS TRAINING KIT
Pilgrim can arrange on-site training using
our comprehensive demonstration kit.
This is delivered by qualified engineers in
either the workshop or a training facility.
18
CLASSIFICATION SOCIETIES VESSEL TYPE
BV BUREAU VERITAS LNG CARRIERS
LR LLOYDS REGISTER LPG CARRIERS
ABS AMERICAN BUREAU of SHIPPING PRODUCT TANKER
DNV DET NORSKE VERITAS OIL TANKER
GL GERMANISCHER LLOYD CONTAINER VESSELS
RINA REGISTRO ITALIANO NAVALE CUTTER DREDGER
CCS CHINA CLASSIFICATION SOCIETY BULKERS
NKK NK NIPPON KAIJI KYOKAI CHEMICAL CARRIER
KR KOREAN REGISTER of SHIPPING PASSENGER / VEHICLE FERRY
RORO
AIRCRAFT CARRIER
SUBMARINE
FRIGATE
CRUISE LINERS
INSTALLATION REFERENCES
Safety and reliability that have been
proven over many years in countless
installations throughout the world
Tel: +44 (0) 161 785 7700
Fax: +44 (0) 161 785 7777
Email: sales@pilgrim-international.co.uk
www.pilgrim-international.co.uk