This shop manual provides information on servicing Komatsu WA800 wheel loaders. It details the structure and function, testing and adjusting procedures, disassembly and assembly instructions, and maintenance standards for the engine, power train, steering system, brake and air system, work equipment system, and electrical and electronic systems. The manual emphasizes safety precautions and proper procedures for tasks like removing and installing components, tightening fasteners, and using lifting equipment to handle heavy parts.
Komatsu wa800 1 wheel loader service repair manual (sn 10001-10499)ufjsjekfksemm
This shop manual provides information for repair and maintenance of Komatsu WA800 wheel loaders. It details the structure and function, testing procedures, disassembly and assembly instructions, and maintenance standards for the engine, power train, steering, brakes, work equipment, electrical and electronic systems. The manual instructs technicians on safety precautions and proper repair procedures to correctly service the equipment. It is intended as an aid to improve repair quality and understanding of the loader.
Komatsu sk714 5 skid steer loader service repair manual (sn 37 af01876 and up)fjkskmmdmme
This document is a shop manual that provides instructions and safety precautions for servicing Komatsu skid-steer loaders models SK714-5, SK815-5, and SK815-5 turbo. The manual contains sections on structure and function, testing and adjusting, disassembly and assembly, and maintenance standards. It emphasizes safety practices such as wearing protective equipment, using lifting devices properly, and relieving pressures before working on hydraulic or cooling systems. The manual is organized by component and provides repair procedures, adjustment instructions, and criteria for inspecting parts.
This document contains instructions for using a shop manual, including:
- The manual is divided into sections covering structure/function, testing/adjusting, disassembly/assembly, and maintenance standards.
- Important points regarding safety, quality, and technical details are marked with symbols.
- Revised pages are listed, and additional or replacement pages are indicated clearly.
- Pages should be filed in proper numerical order to ensure the information is accessible.
Komatsu ck35 1 skid steer loader service repair manual (sn f00003 and up)fjkskmmdmme
This document provides information about a CK35-1 crawler skid-steer loader. It contains sections on structure and function, testing and adjusting, removal and installation, maintenance standards, and other topics. The safety section outlines important safety precautions that must be followed when working on the machine, such as wearing protective equipment and blocking the machine securely before beginning any repairs. It also provides standards for tightening bolts and nuts during assembly.
Komatsu ck20 1 skid steer loader service repair manualfjkskmmdmme
This document provides instructions for removing and installing a cab on a CK20-1 crawler skid-steer loader. The removal process involves disconnecting hoses, removing safety pins and cables, and tilting the cab onto a stand using hoisting tackle. The installation process reverses these steps, ensuring hoses are fully connected and tightened to the correct torque, and filling coolant circuits before testing. Safety precautions are noted such as lowering attachments first and applying tension to hoisting tackle during cab removal.
Komatsu sk1026 5 n skid steer loader service repair manual (sn a80001 and up)fjkskmmdmme
- The document is a shop manual for the SK1026-5N skid steer loader that provides information on maintenance, repair, testing and troubleshooting.
- It details procedures for removing and installing components like the engine assembly, radiator assembly, and battery. Safety precautions are emphasized throughout.
- The manual is divided into sections covering general information, structure and maintenance, specifications, testing, troubleshooting, disassembly/assembly, and diagrams. Symbols are used to mark important safety information.
This shop manual provides instructions for servicing an SK1026-5 turbo skid-steer loader. It contains sections on structure and function, testing and adjusting, disassembly and assembly, and maintenance standards. Safety precautions are outlined, including wearing protective equipment and following proper lifting procedures. The document provides instructions for removing the engine hood and tilting the cab to access components.
Komatsu ck30 1 skid steer loader service repair manual (sn f00003 and up)fjkskmmdmme
This document provides instructions for removing and installing various components on a CK30-1 crawler skid-steer loader, including:
1. The engine hood, requiring removal of retainer screws and nuts.
2. The cab, which involves disconnecting hydraulic lines, cables, and removing safety pins before lifting the cab off with hoisting tackle.
3. The battery, starting motor, and alternator, each involving disconnecting electrical connections and loosening mounting hardware.
4. The air intake filter, which requires loosening a clamp and disconnecting a sensor connector.
Precautions are provided for each procedure, and the instructions note to reverse the removal steps for installation. Torque specifications and
Komatsu wa800 1 wheel loader service repair manual (sn 10001-10499)ufjsjekfksemm
This shop manual provides information for repair and maintenance of Komatsu WA800 wheel loaders. It details the structure and function, testing procedures, disassembly and assembly instructions, and maintenance standards for the engine, power train, steering, brakes, work equipment, electrical and electronic systems. The manual instructs technicians on safety precautions and proper repair procedures to correctly service the equipment. It is intended as an aid to improve repair quality and understanding of the loader.
Komatsu sk714 5 skid steer loader service repair manual (sn 37 af01876 and up)fjkskmmdmme
This document is a shop manual that provides instructions and safety precautions for servicing Komatsu skid-steer loaders models SK714-5, SK815-5, and SK815-5 turbo. The manual contains sections on structure and function, testing and adjusting, disassembly and assembly, and maintenance standards. It emphasizes safety practices such as wearing protective equipment, using lifting devices properly, and relieving pressures before working on hydraulic or cooling systems. The manual is organized by component and provides repair procedures, adjustment instructions, and criteria for inspecting parts.
This document contains instructions for using a shop manual, including:
- The manual is divided into sections covering structure/function, testing/adjusting, disassembly/assembly, and maintenance standards.
- Important points regarding safety, quality, and technical details are marked with symbols.
- Revised pages are listed, and additional or replacement pages are indicated clearly.
- Pages should be filed in proper numerical order to ensure the information is accessible.
Komatsu ck35 1 skid steer loader service repair manual (sn f00003 and up)fjkskmmdmme
This document provides information about a CK35-1 crawler skid-steer loader. It contains sections on structure and function, testing and adjusting, removal and installation, maintenance standards, and other topics. The safety section outlines important safety precautions that must be followed when working on the machine, such as wearing protective equipment and blocking the machine securely before beginning any repairs. It also provides standards for tightening bolts and nuts during assembly.
Komatsu ck20 1 skid steer loader service repair manualfjkskmmdmme
This document provides instructions for removing and installing a cab on a CK20-1 crawler skid-steer loader. The removal process involves disconnecting hoses, removing safety pins and cables, and tilting the cab onto a stand using hoisting tackle. The installation process reverses these steps, ensuring hoses are fully connected and tightened to the correct torque, and filling coolant circuits before testing. Safety precautions are noted such as lowering attachments first and applying tension to hoisting tackle during cab removal.
Komatsu sk1026 5 n skid steer loader service repair manual (sn a80001 and up)fjkskmmdmme
- The document is a shop manual for the SK1026-5N skid steer loader that provides information on maintenance, repair, testing and troubleshooting.
- It details procedures for removing and installing components like the engine assembly, radiator assembly, and battery. Safety precautions are emphasized throughout.
- The manual is divided into sections covering general information, structure and maintenance, specifications, testing, troubleshooting, disassembly/assembly, and diagrams. Symbols are used to mark important safety information.
This shop manual provides instructions for servicing an SK1026-5 turbo skid-steer loader. It contains sections on structure and function, testing and adjusting, disassembly and assembly, and maintenance standards. Safety precautions are outlined, including wearing protective equipment and following proper lifting procedures. The document provides instructions for removing the engine hood and tilting the cab to access components.
Komatsu ck30 1 skid steer loader service repair manual (sn f00003 and up)fjkskmmdmme
This document provides instructions for removing and installing various components on a CK30-1 crawler skid-steer loader, including:
1. The engine hood, requiring removal of retainer screws and nuts.
2. The cab, which involves disconnecting hydraulic lines, cables, and removing safety pins before lifting the cab off with hoisting tackle.
3. The battery, starting motor, and alternator, each involving disconnecting electrical connections and loosening mounting hardware.
4. The air intake filter, which requires loosening a clamp and disconnecting a sensor connector.
Precautions are provided for each procedure, and the instructions note to reverse the removal steps for installation. Torque specifications and
Komatsu sk815 5 n skid steer loader service repair manual (sn a30001 and up)fjkskmmdmme
This shop manual provides service information for Komatsu SK815-5N and SK815-5NA skid steer loaders. It contains sections on general information, structure and maintenance, standard values, testing and adjusting, troubleshooting, disassembly and assembly, and diagrams. The manual aims to improve repair quality by accurately explaining the product and correct repair procedures. It is divided into sections and subgroups to help technicians efficiently service the loaders. Komatsu will provide updates to distributors to keep the information current.
Komatsu sk820 5 n skid steer loader service repair manual (sn a40001 and up)fjkskmmdmme
This shop manual provides instructions for servicing the Komatsu SK820-5N skid steer loader. It contains sections on general information, structure and maintenance standards, testing procedures, troubleshooting guides, disassembly and assembly instructions, and diagrams. The manual is intended to help technicians correctly service the loader by explaining how to perform repairs, make judgments, and follow safety precautions. Customers should contact their distributor for the latest revision as Komatsu continuously improves its products.
Komatsu 8 v170 1 series engine service repair manualfjskemdme
This document provides instructions for disassembling an engine. It lists 19 steps to remove parts like the oil pan, oil pump, alternator, turbocharger assemblies, exhaust manifolds, fuel injection tubes, and other components. Special tools are required for some removal processes. Safety precautions and cleaning procedures are outlined at the beginning. Diagrams accompany each step to illustrate which parts are being removed.
Komatsu ck30 1 skid steer loader service repair manual (sn a30001 and up)fjkskmmdmme
This 3-page shop manual section provides information on servicing and repairing the Komatsu CK30-1 compact track loader. It includes an overview of the manual's contents and structure, safety precautions for working on the equipment, and guidance for how to read and update the manual. The document outlines the main components that will be covered, testing and adjustment procedures, removal and installation instructions, maintenance standards, and other information needed for repair work. Special symbols are used to mark important safety guidelines and quality points.
Komatsu WA420-3 Wheel Loader Service Repair Manual SN:WA420H20051 and upfujdfjjksekfkem
The document provides specifications for a WA420-3 wheel loader including its dimensions, weights, performance capabilities, and engine details. Key specifications listed are an operating weight of 20,020kg, a 3.6m3 bucket capacity, a maximum travel speed of 39km/h, and that it is powered by a Cummins 6CTA8.3 inline 6-cylinder diesel engine producing 167kW.
Komatsu wa470 6 wheel loader service repair manual (sn a46001 and up)fujsjefksekmm
This shop manual provides service technicians with information to repair Komatsu WA470-6 and WA480-6 wheel loaders. It consists of several sections, including structure and function, standard values, testing and adjusting procedures, troubleshooting guides, disassembly and assembly instructions, and diagrams. The manual establishes maintenance standards and safety procedures to properly service the equipment. It is recommended that technicians refer to the most up-to-date information from their distributor when performing repairs.
Komatsu sk714 5 skid steer loader service repair manual sn37 af00004 and upujfjjdkkkkmm
This document contains safety information and instructions for servicing SK714-5, SK815-5, and SK815-5 turbo machines. It discusses general safety precautions, preparations for work, precautions during work, hoisting instructions, and standard tightening torques. The safety section emphasizes wearing protective equipment, blocking the machine, and lowering equipment before working. It also provides guidance for draining fluids, disconnecting parts, and assembling components correctly.
Komatsu sa12 v140z 1 series diesel engine service repair manualGingerHines
This shop manual provides information to aid technicians in performing repairs on Komatsu engines. It is divided into sections covering general information, structure and function, testing and troubleshooting, disassembly and assembly, maintenance standards, and repair of parts. The manual recommends specific coating materials for different applications and advises safety precautions for hoisting heavy components during repairs. Technicians are instructed to keep the manual up to date using revision information from distributors.
Komatsu 6D125 Diesel Engine Service Repair Manualuejjdksemme
This document provides safety guidelines and instructions for servicing a 6D125 series diesel engine. It begins with general safety precautions that should be followed, such as wearing protective equipment and blocking the machine before working on it. Detailed instructions are given for preparations like cooling the engine first before removing parts. Guidelines are provided for safe hoisting practices when removing heavy components. The document also lists various coating materials and their appropriate applications to use during repairs.
Komatsu 8 v170 1 series engine service repair manualfjjsekwsxkdmmem
This document is the introduction and table of contents for a shop manual for engine repair. It outlines safety precautions that should be followed when working on equipment. Some key points include: always wearing protective equipment like safety glasses and shoes, ensuring any lifted components are properly supported, following proper procedures for draining fluids to avoid spills, and making sure replacement parts meet specifications. The manual is divided into sections covering general information, component operation and function, testing and adjustment procedures, disassembly and assembly steps, and maintenance standards.
Komatsu 12V170-2 Series Engine Service Repair Manual.pdf8fseujdkdmde3
This document provides disassembly instructions for an engine. It lists 21 steps to disassemble parts like the air cleaner, muffler, turbocharger, exhaust manifolds, water pump, and oil cooler. Safety precautions are provided, such as draining fluids and cleaning parts before disassembly. Weights and removal tools are noted for some components. The instructions are accompanied by diagrams to illustrate the disassembly process.
Komatsu 12V170-2 Series Engine Service Repair Manual.pdfufjsekdmdidj3e
This document provides disassembly instructions for an engine. It lists 21 steps to disassemble parts like the air cleaner, muffler, turbocharger, exhaust manifolds, water pump, and oil cooler. Safety precautions are marked with a symbol. Weights and capacities are provided for removed parts and fluids. Detailed photographs illustrate the disassembly process.
Komatsu 12V170-2 Series Engine Service Repair Manual.pdfnii776204
This document provides disassembly instructions for an engine. It lists 21 steps to disassemble parts like the air cleaner, muffler, turbocharger, exhaust manifolds, water pump, and oil cooler. Safety precautions are provided, such as draining fluids and cleaning parts before disassembly. Weights and removal tools are noted for some components. The instructions are accompanied by diagrams to illustrate the disassembly process.
Komatsu 12V170-2 Series Engine Service Repair Manual.pdffjkkskmdmmd
This document provides disassembly instructions for an engine. It lists 21 steps to disassemble parts like the air cleaner, muffler, turbocharger, exhaust manifolds, water pump, and oil cooler. Safety precautions are provided, such as draining fluids and cleaning parts before disassembly. Weights and removal tools are noted for some components. The instructions are accompanied by diagrams to illustrate the disassembly process.
Komatsu 12V170-2 Series Engine Service Repair Manual.pdfdksmiekddmdmd
This document provides disassembly instructions for an engine. It lists 21 steps to disassemble parts like the air cleaner, muffler, turbocharger, exhaust manifolds, water pump, and oil cooler. Safety precautions are provided, such as draining fluids and cleaning parts before disassembly. Weights and removal tools are noted for some components. The instructions are accompanied by diagrams to illustrate the disassembly process.
Komatsu 12V170-2 Series Engine Service Repair Manual.pdff7uusejkddkm3e
This document provides disassembly instructions for an engine. It lists 21 steps to disassemble parts like the air cleaner, muffler, turbocharger, exhaust manifolds, water pump, and oil cooler. Safety precautions are provided, such as draining fluids and cleaning parts before disassembly. Weights and removal tools are noted for some components. The instructions are accompanied by diagrams to illustrate the disassembly process.
Komatsu 12V170-2 Series Engine Service Repair Manual.pdffujkseodidk3e
This document provides disassembly instructions for an engine. It lists 21 steps to disassemble parts like the air cleaner, muffler, turbocharger, exhaust manifolds, water pump, and oil cooler. Safety precautions are provided, such as draining fluids, cleaning parts before disassembly, and noting weights of parts to ensure proper lifting. Disassembly is done in order from exterior parts to internal engine components.
Toyota 7 fbmf50 forklift service repair manualufjsjekfksemm
This document provides specifications and component information for drive motors and pump motors used in Toyota forklifts. It includes specifications for drive motors used in 16-35 and 40-50 model forklifts such as nominal voltage, rated output, dimensions, and weight. Diagrams show the components of the drive motor and procedures for removal, installation, disassembly, inspection, and reassembly are provided. Specifications and components are also provided for the pump motor, and procedures for removal, installation, disassembly, inspection, and reassembly of the pump motor are described.
Toyota 7 fbmf45 forklift service repair manualufjsjekfksemm
This document provides an index and overview of sections for a service manual on a Toyota 7FBMF 16-50 forklift. The General section includes exterior views of models, vehicle specifications, frame numbers, operational tips, component weights, lubrication charts, and maintenance schedules. Sections cover the drive motor, pump motor, power steering motor, and other components. The manual explains procedures for removal, installation, disassembly, inspection and reassembly of parts.
Toyota 7 fbmf40 forklift service repair manualufjsjekfksemm
This document provides an index and overview of sections for a service manual on a Toyota 7FBMF 16-50 forklift. The General section includes exterior views of models, vehicle specifications, frame numbers, instructions for using the manual, terminology, jack-up points, and maintenance schedules. Individual sections cover the battery, controller, display functions, troubleshooting, motor, drive unit, front and rear axles, steering, brakes, body, material handling system, mast, cylinder, oil pump, and SAS functions.
Toyota 7 fbmf35 forklift service repair manualufjsjekfksemm
This document provides an index and overview of sections for a service manual on a Toyota 7FBMF 16-50 forklift. The General section includes exterior views of models, vehicle specifications, frame numbers, instructions for using the manual, terminology, jack-up points, and maintenance schedules. Individual sections cover the battery, controller, display functions, troubleshooting, motor, drive unit, front and rear axles, steering, brakes, body, material handling system, mast, cylinder, oil pump, and SAS functions.
Toyota 7 fbmf30 forklift service repair manualufjsjekfksemm
This document provides an index and overview of sections for a service manual on a Toyota 7FBMF 16-50 forklift. The General section includes exterior views of models, vehicle specifications, frame numbers, instructions for using the manual, terminology, jack-up points, and maintenance schedules. Individual sections cover the battery, controller, display functions, troubleshooting, motor, drive unit, front and rear axles, steering, brakes, body, material handling system, mast, cylinder, oil pump, and SAS functions.
Komatsu sk815 5 n skid steer loader service repair manual (sn a30001 and up)fjkskmmdmme
This shop manual provides service information for Komatsu SK815-5N and SK815-5NA skid steer loaders. It contains sections on general information, structure and maintenance, standard values, testing and adjusting, troubleshooting, disassembly and assembly, and diagrams. The manual aims to improve repair quality by accurately explaining the product and correct repair procedures. It is divided into sections and subgroups to help technicians efficiently service the loaders. Komatsu will provide updates to distributors to keep the information current.
Komatsu sk820 5 n skid steer loader service repair manual (sn a40001 and up)fjkskmmdmme
This shop manual provides instructions for servicing the Komatsu SK820-5N skid steer loader. It contains sections on general information, structure and maintenance standards, testing procedures, troubleshooting guides, disassembly and assembly instructions, and diagrams. The manual is intended to help technicians correctly service the loader by explaining how to perform repairs, make judgments, and follow safety precautions. Customers should contact their distributor for the latest revision as Komatsu continuously improves its products.
Komatsu 8 v170 1 series engine service repair manualfjskemdme
This document provides instructions for disassembling an engine. It lists 19 steps to remove parts like the oil pan, oil pump, alternator, turbocharger assemblies, exhaust manifolds, fuel injection tubes, and other components. Special tools are required for some removal processes. Safety precautions and cleaning procedures are outlined at the beginning. Diagrams accompany each step to illustrate which parts are being removed.
Komatsu ck30 1 skid steer loader service repair manual (sn a30001 and up)fjkskmmdmme
This 3-page shop manual section provides information on servicing and repairing the Komatsu CK30-1 compact track loader. It includes an overview of the manual's contents and structure, safety precautions for working on the equipment, and guidance for how to read and update the manual. The document outlines the main components that will be covered, testing and adjustment procedures, removal and installation instructions, maintenance standards, and other information needed for repair work. Special symbols are used to mark important safety guidelines and quality points.
Komatsu WA420-3 Wheel Loader Service Repair Manual SN:WA420H20051 and upfujdfjjksekfkem
The document provides specifications for a WA420-3 wheel loader including its dimensions, weights, performance capabilities, and engine details. Key specifications listed are an operating weight of 20,020kg, a 3.6m3 bucket capacity, a maximum travel speed of 39km/h, and that it is powered by a Cummins 6CTA8.3 inline 6-cylinder diesel engine producing 167kW.
Komatsu wa470 6 wheel loader service repair manual (sn a46001 and up)fujsjefksekmm
This shop manual provides service technicians with information to repair Komatsu WA470-6 and WA480-6 wheel loaders. It consists of several sections, including structure and function, standard values, testing and adjusting procedures, troubleshooting guides, disassembly and assembly instructions, and diagrams. The manual establishes maintenance standards and safety procedures to properly service the equipment. It is recommended that technicians refer to the most up-to-date information from their distributor when performing repairs.
Komatsu sk714 5 skid steer loader service repair manual sn37 af00004 and upujfjjdkkkkmm
This document contains safety information and instructions for servicing SK714-5, SK815-5, and SK815-5 turbo machines. It discusses general safety precautions, preparations for work, precautions during work, hoisting instructions, and standard tightening torques. The safety section emphasizes wearing protective equipment, blocking the machine, and lowering equipment before working. It also provides guidance for draining fluids, disconnecting parts, and assembling components correctly.
Komatsu sa12 v140z 1 series diesel engine service repair manualGingerHines
This shop manual provides information to aid technicians in performing repairs on Komatsu engines. It is divided into sections covering general information, structure and function, testing and troubleshooting, disassembly and assembly, maintenance standards, and repair of parts. The manual recommends specific coating materials for different applications and advises safety precautions for hoisting heavy components during repairs. Technicians are instructed to keep the manual up to date using revision information from distributors.
Komatsu 6D125 Diesel Engine Service Repair Manualuejjdksemme
This document provides safety guidelines and instructions for servicing a 6D125 series diesel engine. It begins with general safety precautions that should be followed, such as wearing protective equipment and blocking the machine before working on it. Detailed instructions are given for preparations like cooling the engine first before removing parts. Guidelines are provided for safe hoisting practices when removing heavy components. The document also lists various coating materials and their appropriate applications to use during repairs.
Komatsu 8 v170 1 series engine service repair manualfjjsekwsxkdmmem
This document is the introduction and table of contents for a shop manual for engine repair. It outlines safety precautions that should be followed when working on equipment. Some key points include: always wearing protective equipment like safety glasses and shoes, ensuring any lifted components are properly supported, following proper procedures for draining fluids to avoid spills, and making sure replacement parts meet specifications. The manual is divided into sections covering general information, component operation and function, testing and adjustment procedures, disassembly and assembly steps, and maintenance standards.
Komatsu 12V170-2 Series Engine Service Repair Manual.pdf8fseujdkdmde3
This document provides disassembly instructions for an engine. It lists 21 steps to disassemble parts like the air cleaner, muffler, turbocharger, exhaust manifolds, water pump, and oil cooler. Safety precautions are provided, such as draining fluids and cleaning parts before disassembly. Weights and removal tools are noted for some components. The instructions are accompanied by diagrams to illustrate the disassembly process.
Komatsu 12V170-2 Series Engine Service Repair Manual.pdfufjsekdmdidj3e
This document provides disassembly instructions for an engine. It lists 21 steps to disassemble parts like the air cleaner, muffler, turbocharger, exhaust manifolds, water pump, and oil cooler. Safety precautions are marked with a symbol. Weights and capacities are provided for removed parts and fluids. Detailed photographs illustrate the disassembly process.
Komatsu 12V170-2 Series Engine Service Repair Manual.pdfnii776204
This document provides disassembly instructions for an engine. It lists 21 steps to disassemble parts like the air cleaner, muffler, turbocharger, exhaust manifolds, water pump, and oil cooler. Safety precautions are provided, such as draining fluids and cleaning parts before disassembly. Weights and removal tools are noted for some components. The instructions are accompanied by diagrams to illustrate the disassembly process.
Komatsu 12V170-2 Series Engine Service Repair Manual.pdffjkkskmdmmd
This document provides disassembly instructions for an engine. It lists 21 steps to disassemble parts like the air cleaner, muffler, turbocharger, exhaust manifolds, water pump, and oil cooler. Safety precautions are provided, such as draining fluids and cleaning parts before disassembly. Weights and removal tools are noted for some components. The instructions are accompanied by diagrams to illustrate the disassembly process.
Komatsu 12V170-2 Series Engine Service Repair Manual.pdfdksmiekddmdmd
This document provides disassembly instructions for an engine. It lists 21 steps to disassemble parts like the air cleaner, muffler, turbocharger, exhaust manifolds, water pump, and oil cooler. Safety precautions are provided, such as draining fluids and cleaning parts before disassembly. Weights and removal tools are noted for some components. The instructions are accompanied by diagrams to illustrate the disassembly process.
Komatsu 12V170-2 Series Engine Service Repair Manual.pdff7uusejkddkm3e
This document provides disassembly instructions for an engine. It lists 21 steps to disassemble parts like the air cleaner, muffler, turbocharger, exhaust manifolds, water pump, and oil cooler. Safety precautions are provided, such as draining fluids and cleaning parts before disassembly. Weights and removal tools are noted for some components. The instructions are accompanied by diagrams to illustrate the disassembly process.
Komatsu 12V170-2 Series Engine Service Repair Manual.pdffujkseodidk3e
This document provides disassembly instructions for an engine. It lists 21 steps to disassemble parts like the air cleaner, muffler, turbocharger, exhaust manifolds, water pump, and oil cooler. Safety precautions are provided, such as draining fluids, cleaning parts before disassembly, and noting weights of parts to ensure proper lifting. Disassembly is done in order from exterior parts to internal engine components.
Similar to Komatsu wa800 2 wheel loader service repair manual (sn 10501 and up) (8)
Toyota 7 fbmf50 forklift service repair manualufjsjekfksemm
This document provides specifications and component information for drive motors and pump motors used in Toyota forklifts. It includes specifications for drive motors used in 16-35 and 40-50 model forklifts such as nominal voltage, rated output, dimensions, and weight. Diagrams show the components of the drive motor and procedures for removal, installation, disassembly, inspection, and reassembly are provided. Specifications and components are also provided for the pump motor, and procedures for removal, installation, disassembly, inspection, and reassembly of the pump motor are described.
Toyota 7 fbmf45 forklift service repair manualufjsjekfksemm
This document provides an index and overview of sections for a service manual on a Toyota 7FBMF 16-50 forklift. The General section includes exterior views of models, vehicle specifications, frame numbers, operational tips, component weights, lubrication charts, and maintenance schedules. Sections cover the drive motor, pump motor, power steering motor, and other components. The manual explains procedures for removal, installation, disassembly, inspection and reassembly of parts.
Toyota 7 fbmf40 forklift service repair manualufjsjekfksemm
This document provides an index and overview of sections for a service manual on a Toyota 7FBMF 16-50 forklift. The General section includes exterior views of models, vehicle specifications, frame numbers, instructions for using the manual, terminology, jack-up points, and maintenance schedules. Individual sections cover the battery, controller, display functions, troubleshooting, motor, drive unit, front and rear axles, steering, brakes, body, material handling system, mast, cylinder, oil pump, and SAS functions.
Toyota 7 fbmf35 forklift service repair manualufjsjekfksemm
This document provides an index and overview of sections for a service manual on a Toyota 7FBMF 16-50 forklift. The General section includes exterior views of models, vehicle specifications, frame numbers, instructions for using the manual, terminology, jack-up points, and maintenance schedules. Individual sections cover the battery, controller, display functions, troubleshooting, motor, drive unit, front and rear axles, steering, brakes, body, material handling system, mast, cylinder, oil pump, and SAS functions.
Toyota 7 fbmf30 forklift service repair manualufjsjekfksemm
This document provides an index and overview of sections for a service manual on a Toyota 7FBMF 16-50 forklift. The General section includes exterior views of models, vehicle specifications, frame numbers, instructions for using the manual, terminology, jack-up points, and maintenance schedules. Individual sections cover the battery, controller, display functions, troubleshooting, motor, drive unit, front and rear axles, steering, brakes, body, material handling system, mast, cylinder, oil pump, and SAS functions.
Toyota 7 fbmf25 forklift service repair manualufjsjekfksemm
This document provides specifications and component information for drive motors and pump motors used in Toyota forklifts. It includes specifications for drive motors used in 16-35 and 40-50 model forklifts such as nominal voltage, rated output, dimensions, and weight. Diagrams show the components of the drive motor and procedures for removal, installation, disassembly, inspection, and reassembly are provided. Specifications and components are also provided for the pump motor, and procedures for removal, installation, disassembly, inspection, and reassembly of the pump motor are described.
Toyota 7 fbmf20 forklift service repair manualufjsjekfksemm
This document provides an index and overview of sections for a service manual on a Toyota 7FBMF 16-50 forklift. The General section includes exterior views of models, vehicle specifications, frame numbers, instructions for using the manual, terminology, jack-up points, and maintenance schedules. Individual sections cover the battery, controller, display functions, troubleshooting, motor, drive unit, front and rear axles, steering, brakes, body, material handling system, mast, cylinder, oil pump, and SAS functions.
Toyota 7 fbmf18 forklift service repair manualufjsjekfksemm
This document provides specifications and component information for drive motors and pump motors used in Toyota forklifts. It includes specifications for drive motors used in 16-35 and 40-50 model forklifts such as nominal voltage, rated output, dimensions, and weight. Diagrams show the components of the drive motor and procedures for removal, installation, disassembly, inspection, and reassembly are provided. Specifications and components are also provided for the pump motor, and procedures for removal, installation, disassembly, inspection, and reassembly of the pump motor are described.
Toyota 7 fbmf16 forklift service repair manualufjsjekfksemm
This document provides specifications and component information for drive motors and pump motors used in Toyota forklifts. It includes specifications for drive motors used in 16-35 and 40-50 model forklifts such as nominal voltage, rated output, dimensions, and weight. Diagrams show the components of the drive motor and procedures for removal, installation, disassembly, inspection, and reassembly are provided. Specifications and components are also provided for the pump motor, and procedures for removal, installation, disassembly, inspection, and reassembly of the pump motor are described.
Toyota 7 fbmf 50 electric forklift truck service repair manualufjsjekfksemm
The document summarizes the key details of Toyota electric forklift trucks models 7FBMF 16-50. It outlines the development objectives of improving performance and expanding capacity offerings. The new models feature AC induction motors, SAS active stability system, and increased capacities up to 5 tons. Comfort and serviceability were also improved through measures like under-floor batteries and eliminating motor brushes.
Toyota 7 fbmf 45 electric forklift truck service repair manualufjsjekfksemm
The document provides details on new Toyota electric forklift truck models 7FBMF16-50, including:
- The models were developed to improve performance, comfort, and serviceability while introducing larger capacity trucks over 3.5 tons.
- Key features include an AC induction motor system, SAS active stability system, wet brake system, improved comfort, and ease of serviceability.
- The trucks have increased capacity ranging from 1.6 to 5 tons, with larger wheelbases and overhead guards compared to previous models.
Toyota 7 fbmf 40 electric forklift truck service repair manualufjsjekfksemm
The document provides details on new Toyota electric forklift truck models 7FBMF16-50, including:
- The models were developed to improve performance, comfort, and serviceability while introducing larger capacity trucks over 3.5 tons.
- Key features include an AC induction motor system, SAS active stability system, wet brake system, improved comfort, and ease of serviceability.
- The trucks have increased capacity ranging from 1.6 to 5 tons, with larger wheelbases and overhead guards compared to previous models.
Toyota 7 fbmf 35 electric forklift truck service repair manualufjsjekfksemm
The document describes Toyota's new 7FBMF 16-50 electric forklift truck models. Key features include:
1) An AC induction motor and controller system which improves performance and eliminates the need for motor brush servicing.
2) A System of Active Stability (SAS) which improves stability during turns and when lifting loads.
3) The introduction of larger capacity models between 3.5-5 tons to expand the product range.
The new models aim to provide cleaner and higher performing electric forklifts while improving operator comfort and safety.
Toyota 7 fbmf 30 electric forklift truck service repair manualufjsjekfksemm
The document describes Toyota's new 7FBMF 16-50 electric forklift truck models. Key features include:
1) An AC induction motor and controller system which improves performance and eliminates the need for motor brush servicing.
2) A System of Active Stability (SAS) which improves stability during turns and when lifting loads.
3) The introduction of larger capacity models between 3.5-5 tons to expand the product range.
The new models aim to provide cleaner and higher performing electric forklifts while improving operator comfort and safety.
Toyota 7 fbmf 25 electric forklift truck service repair manualufjsjekfksemm
The document summarizes the key details of Toyota electric forklift trucks models 7FBMF 16-50:
- It outlines the new AC induction motor drive system, larger capacity models up to 5 tons, and improved stability system SAS.
- The trucks have improved performance, operator comfort, serviceability and safety features compared to previous models. These include a power keep function, easier entry/exit, wet brake system and active mast control.
- Model specifications, component upgrades, selling points and design differences from prior models are provided for the new 1.6-5 ton electric forklift series.
Toyota 7 fbmf 20 electric forklift truck service repair manualufjsjekfksemm
The document summarizes the key details of Toyota electric forklift trucks models 7FBMF 16-50:
- It outlines the new AC induction motor drive system, larger capacity models up to 5 tons, and improved stability system SAS.
- The trucks have improved performance, operator comfort, serviceability and safety features compared to previous models. These include a power keep function, easier entry/exit, wet brake system and active stability controls.
- Model specifications, component upgrades, selling points and design differences from prior models are described for the new 1.6-5 ton electric forklift range.
Toyota 7 fbmf 18 electric forklift truck service repair manualufjsjekfksemm
The document summarizes the key details of Toyota electric forklift trucks models 7FBMF 16-50:
- It outlines the new AC induction motor drive system, larger capacity models up to 5 tons, and improved stability system SAS.
- The trucks have improved performance, operator comfort, serviceability and safety features compared to previous models. These include a power keep function, adjustable power modes, easier entry/exit, wet brake system and active mast control.
- Model specifications, component upgrades, selling points and design differences from prior models are described for the new 1.6-5 ton electric forklift range.
Toyota 7 fbmf 16 electric forklift truck service repair manualufjsjekfksemm
The document summarizes the key details of Toyota electric forklift trucks models 7FBMF 16-50. It outlines the development objectives of improving performance and expanding capacity offerings. The new models feature AC induction motors, SAS active stability system, and increased capacity options up to 5.0 tons. Comfort and serviceability were also improved through measures like under-floor batteries and eliminating motor brushes.
Massey ferguson mf 3455 c crawler type tractor parts catalogue manualufjsjekfksemm
This document provides part numbers and descriptions for components of a Massey Ferguson MF 3455 C/CF/CM crawler-type tractor engine. It includes listings for the engine assembly, short engine, cylinder block, camshaft, pistons and connecting rods, end cover, cylinder head, rocker shaft, and fuel injection equipment. The listings provide item numbers, part numbers, quantities, descriptions, and in some cases additional details like replacement information.
Massey ferguson mf 3455 c crawler tractors (tier 3) parts catalogue manualufjsjekfksemm
This document provides part numbers and descriptions for components of a Massey Ferguson MF 3455 C/CF/CFM crawler tractor engine. It includes listings of parts for the engine assembly, short engine, cylinder block, camshaft, pistons/connecting rods, end cover, cylinder head, and rocker shaft. Each item lists the part number, quantity, description, and notes whether it is a component of a larger assembly.
Learn why monitoring your Mercedes' Exhaust Back Pressure (EBP) sensor is crucial. Understand its role in engine performance and emission reduction. Discover five warning signs of EBP sensor failure, from loss of power to increased emissions. Take action promptly to avoid costly repairs and maintain your Mercedes' reliability and efficiency.
Ever been troubled by the blinking sign and didn’t know what to do?
Here’s a handy guide to dashboard symbols so that you’ll never be confused again!
Save them for later and save the trouble!
How To Fix The Key Not Detected Issue In Mercedes CarsIntegrity Motorcar
Experiencing a "Key Not Detected" problem in your Mercedes? Don’t take it for granted. Go through this presentation to find out the exact nature of the issue you are dealing with. Have your vehicle checked by a certified professional if necessary.
What Are The Immediate Steps To Take When The VW Temperature Light Starts Fla...Import Motorworks
Learn how to respond when the red temperature light flashes in your VW with this presentation. From checking coolant levels to seeking professional help, follow these steps promptly to prevent engine damage and ensure safety on the road.
What Could Cause The Headlights On Your Porsche 911 To Stop WorkingLancer Service
Discover why your Porsche 911 headlights might flicker out unexpectedly. From aging bulbs to electrical gremlins and moisture mishaps, we're delving into the reasons behind the blackout. Stay tuned to illuminate the road ahead and ensure your lights shine bright for safer journeys.
What Is Recruitment Processing Outsourcing (RPO) Services?Impeccable HR
Impeccable HR provides a wide range of RPO services for your bulk hiring needs within a stipulated period. They meticulously build RPO solutions to improve your recruitment process. RPO services are great for budget-conscious recruiters who want high-quality personnel.
The Octavia range embodies the design trend of the Škoda brand: a fusion of
aesthetics, safety and practicality. Whether you see the car as a whole or step
closer and explore its unique features, the Octavia range radiates with the
harmony of functionality and emotion
Implementing ELDs or Electronic Logging Devices is slowly but surely becoming the norm in fleet management. Why? Well, integrating ELDs and associated connected vehicle solutions like fleet tracking devices lets businesses and their in-house fleet managers reap several benefits. Check out the post below to learn more.
Comprehensive program for Agricultural Finance, the Automotive Sector, and Empowerment . We will define the full scope and provide a detailed two-week plan for identifying strategic partners in each area within Limpopo, including target areas.:
1. Agricultural : Supporting Primary and Secondary Agriculture
• Scope: Provide support solutions to enhance agricultural productivity and sustainability.
• Target Areas: Polokwane, Tzaneen, Thohoyandou, Makhado, and Giyani.
2. Automotive Sector: Partnerships with Mechanics and Panel Beater Shops
• Scope: Develop collaborations with automotive service providers to improve service quality and business operations.
• Target Areas: Polokwane, Lephalale, Mokopane, Phalaborwa, and Bela-Bela.
3. Empowerment : Focusing on Women Empowerment
• Scope: Provide business support support and training to women-owned businesses, promoting economic inclusion.
• Target Areas: Polokwane, Thohoyandou, Musina, Burgersfort, and Louis Trichardt.
We will also prioritize Industrial Economic Zone areas and their priorities.
Sign up on https://profilesmes.online/welcome/
To be eligible:
1. You must have a registered business and operate in Limpopo
2. Generate revenue
3. Sectors : Agriculture ( primary and secondary) and Automative
Women and Youth are encouraged to apply even if you don't fall in those sectors.
Komatsu wa800 2 wheel loader service repair manual (sn 10501 and up)
1. SEBM04280113
WA8OO42
MACHINE MODEL SERIAL NO.
WA800- 1 10001-10499
WA800-2 10501 and up
l This shop manual may contain attachments and optional equipment that are not availa-
ble in your area. Please consult your local Komatsu distributor for those items you may
require.
Materials and specifications are subject to change without notice.
l WA8OO-1 mounts the SA8V170-1 engine;
WA800-2 mount the SA12V140-1 engine.
For details of the engines, see the 8V170-1 Series Engine Shop Manual and 12V14O-1
Series Engine Shop Manual.
0 1996 KOMAlhJ
All Rights Reserved
05-96(01)02201 00-l
0
2. CONTENTS
10 ENGINE
11 STRUCTURE AND FUNCTION ..........
12 TESTING AND ADJUSTING ............
13 DISASSEMBLY AND ASSEMBLY .......
14 MAINTENANCE STANDARD ...........
20 POWER TRAIN
21 STRUCTURE AND FUNCTION .........
22 TESTING AND ADJUSTING ...........
23 DISASSEMBLY AND ASSEMBLY ......
24 MAINTENANCE STANDARD ..........
40 STEERING SYSTEM
41 STRUCTURE AND FUNCTION .........
42 TESTING AND ADJUSTING ...........
43 DISASSEMBLY AND ASSEMBLY ......
44 MAINTENANCE STANDARD ..........
50 BRAKE AND AIR SYSTEM
5 1 STRUCTURE AND FUNCTION .........
52 TESTING AND ADJUSTING ............
53 DISASSEMBLY AND ASSEMBLY ......
54 MAINTENANCE STANDARD ..........
60 WORK EQUIPMENT SYSTEM
61
62
63
64
STRUCTURE AND FUNCTION ..........
TESTING AND ADJUSTING ............
DISASSEMBLY AND ASSEMBLY .......
MAINTENANCE STANDARD ...........
80 ELECTRIC AND ELECTRONIC SYSTEM
No. of page
................................ 1 l-l
................................ 12-l
................................ 13-1
................................ 14-l
................................... 21-1
................................... 22-l
................................... 23-l
................................... 24-l
. .
. . .
. . .
. . .
. . .
........
........
........
. . . . . . . .
. . . . . . . .
. . . ...... 41-l
. . . ...... 42-l
. . . ...... 43-l
. . .
. . . . . . 44-l r*1
g
:
...... 51-1
...... 52-l
...... 53-l
...... 54-l
................................ 61-1
................................ 62-l
................................ 63-l
................................ 64-l
81 STRUCTURE AND FUNCTION ............................................... 81-l
82 TESTING AND ADJUSTING ................................................. 82-1
83 DISASSEMBLY AND ASSEMBLY ............................................ 83-l
90 OTHERS
91 STRUCTURE AND FUNCTION ..........
93 DISASSEMBLY AND ASSEMBLY .......
97 GEAR PUMP ..........................
.................................. 91-1
.................................. 93-l
.................................. 97-l
3. A IMPORTANT SAFETY NOTICE
Proper service and repair is extremely important for the safe operation of your machine.
The service and repair techniques recommended by Komatsu and described in this
manual are both effective and safe methods of operation. Some of these operations re-
quire the use of tools specially designed by Komatsu for the purpose.
To prevent injury to workers, the symbols A
YYand
*
are used to mark safety pre-
cautions in this manual. The cautions accompanying these symbols should always be
followed carefully. If any dangerous situation arises or may possibly arise, first consider
safety, and take the necessary actions to deal with the situation.
A SAFETY
GENERAL PRECAUTIONS
Mistakes in operation are extremely dangerous.
Read the Operation and Maintenance Manual
carefully BEFORE operating the machine.
1. Before carrying out any greasing or repairs,
read all the precautions given on the
decals which are fixed to the machine.
q When carrying out any operation, always
wear safety shoes and helmet. Do not wear
loose work clothes, or clothes with buttons
missing.
. Always wear safety glasses when hitting
parts with a hammer.
. Always wear safety glasses when
grinding parts with a grinder, etc.
If welding repairs are needed, always have a
trained, experienced welder carry out the
work. When carrying out welding work,
always wear welding gloves, apron, glasses,
cap and other clothes suited for welding
work.
When carrying out any operation with two
or more workers, always agree on the op-
erating procedure before starting. Always
inform your fellow workers before starting
any step of the operation. Before starting
work, hang UNDER REPAIR signs on the
controls in the operator’s compartment.
Keep all tools in good condition and learn
the correct way to use them.
6. Decide a place in the repair workshop to
keep tools and removed parts. Always keep
the tools and parts in their correct places.
Always keep the work area clean and make
sure that there is no dirt or oil on the floor.
Smoke only in the areas provided for
smoking. Never smoke while working.
PREPARATIONS FOR WORK
7
8
9
IO
Before adding oil or making any repairs,
park the machine on hard, level ground, and
block the wheels or tracks to prevent the
machine from moving.
Before starting work, lower blade, ripper,
bucket or any other work equipment to the
ground. If this is not possible, insert the
safety pin or use blocks to prevent the work
equipment from falling. In addition, be sure
to lock all the control levers and hang
warning signs on them.
When disassembling or assembling, sup-
port the machine with blocks, jacks or
stands before starting work.
Remove all mud and oil from the steps or
other places used to get on and off the
machine. Always use the handrails, ladders
or steps when getting on or off the
machine. Never jump on or off the machine.
If it is impossible to use the handrails,
ladders or steps, use a stand to provide safe
footing.
00-3
4. PRECAUTIONS DURING WORK
Il. When removing the oil filler cap, drain plug
or hydraulic pressure measuring plugs,
loosen them slowly to prevent the oil from
spurting out.
Before disconnecting or removing compo-
nents of the oil, water or air circuits, first
remove the pressure completely from the
circuit.
12.The water and oil in the circuits are hot
when the engine is stopped, so be careful
not to get burned.
Wait for the oil and water to cool before car-
rying out any work on the oil or water
circuits.
13. Before starting work, remove the leads from
the battery. Always remove the lead from
the negative (- 1terminal first.
14. When raising heavy components, use a
hoist or crane.
Check that the wire rope, chains and hooks
are free from damage.
Always use lifting equipment which has
ample capacity.
Install the lifting equipment at the correct
places. Use a hoist or crane and operate
slowly to prevent the component from hit-
ting any other part. Do not work with any
part still raised by the hoist or crane.
15. When removing covers which are under in-
ternal pressure or under pressure from a
spring, always leave two bolts in position on
opposite sides. Slowly release the pressure,
then slowly loosen the bolts to remove.
16. When removing components, be careful not
to break or damage the wiring. Damaged
wiring may cause electrical fires.
17. When removing piping, stop the fuel or oil
from spilling out. If any fuel or oil drips on to
the floor, wipe it up immediately. Fuel or oil
on the floor can cause you to slip, or can
even start fires.
18.As a general rule, do not use gasoline to
wash parts. In particular, use only the mini-
mum of gasoline when washing electrical
parts.
19. Be sure to assemble all parts again in their
original places.
Replace any damaged parts with new parts.
l When installing hoses and wires, be
sure that they will not be damaged by
contact with other parts when the ma-
chine is being operated.
20. When installing high pressure hoses, make
sure that they are not twisted. Damaged
tubes are dangerous, so be extremely care-
ful when installing tubes for high pressure
circuits. Also, check that connecting parts
are correctly installed.
21 When assembling or installing parts, always
use the specified tightening torques. When
installing protective parts such as guards, or
parts which vibrate violently or rotate at
high speed, be particularly careful to check
that they are installed correctly.
22. When aligning two holes, never insert your
fingers or hand. Be careful not to get your
fingers caught in a hole.
23. When measuring hydraulic pressure, check
that the measuring tool is correctly assem-
bled before taking any measurements.
24 Take care when removing or installing the
tracks of track-type machines.
When removing the track, the track sepa-
rates suddenly, so never let anyone stand at
either end of the track.
00-4
5. FOREWORD
This shop manual has been prepared as an aid to improve the quality of repairs by giving the
serviceman an accurate understanding of the product and by showing him the correct way to perform
repairs and make judgements. Make sure you understand the contents of this manual and use it to full
effect at every opportunity.
This shop manual mainly contains the necessary technical information for operations performed in
a service workshop.
For ease of understanding, the manual is divided into chapters for each main group of
components; these chapters are further divided into the following sections.
STRUCTURE AND FUNCTION
This section explains the structure and function of each component. It serves not only to give
an understanding of the structure, but also serves as reference material for troubleshooting.
TESTING AND ADJUSTING
This section explains checks to be made before and after performing repairs, as well as
adjustments to be made at completion of the checks and repairs.
Troubleshooting charts correlating “Problems” to “Causes” are also included in this section.
DISASSEMBLY AND ASSEMBLY
This section explains the order to be followed when removing, installing, disassembling or
assembling each component, as well as precautions to be taken for these operations.
MAINTENANCE STANDARD
This section gives the judgement standards when inspecting disassembled parts.
NOTICE
The specifications contained in this shop manual are subject to change at any
time and without any advance notice. Contact your KOMATSU distributor for the
latest information.
00-5
6. HOW TO READ THE SHOP MANUAL
HOW TO READ THE SHOP MANUAL
VOLUMES
Shop manuals are issued as a guide to carry-
ing out repairs. They are divided as follows:
Chassis volume: Issued for every machine
model
Engine volume: Issued for each engine series
Electrical volume :
Attachments volume :
Each issued as
one volume to
cover all models
These various volumes are designed to avoid
duplicating the same information. Therefore to
deal with all repairs for any model, it is neces-
sary that chassis, engine, electrical and attach-
ment volumes are ready.
DISTRIBUTION AND UPDATING
Any additions, amendments or other
changes will be sent to KOMATSU distributers.
Get the most up-to-date information before
you start any work.
FILING METHOD
1. See the page number on the bottom of the
page. File the pages in correct order.
2. Following examples shows how to read the
page number.
Example 1 (Chassis volume):
IO-3
F
Item number (IO. Structure
and Function)
Consecutive page number for
each item.
Example 2 (Engine volume):
12-410
F
Unit number (I. Engine)
Item number (2. Testing and
Adjusting)
Group No. (4. Fuel system)
Consecutive page No. (Page
10 of Group 4)
3. Additional pages: Additional pages are in-
dicated by a hyphen (-1 and number after the
page number. File as in the example.
Example:
1o-4 12-203
REVISED EDITION MARK ((ijo@ .... )
When a manual is revised, an edition mark is
recorded on the bottom outside corner of the
pages.
REVISIONS
Revised pages are shown at the LIST OF
REVISED PAGES on the between the title page
and SAFETY page.
SYMBOLS
So that the shop manual can be of ample
practical use, important places for safety and
quality are marked with the following symbols.
Symbol Item
A
Y &
$
*
63kg
Safety
Caution
Weight
Tighten-
ng torque
Coat
3il, water
Drain
Remarks
Special safety precautions are
necessary when performing the
work.
Extra special safety precautions
are necessary when performing
the work because it is under
internal pressure.
Special technical precautions or
other precautions for
preserving standards are
necessary when performing the
work.
Weight of parts or systems.
Caution necessary when
selecting hoisting wire, or when
working posture is important,
etc.
Places that require special
attention for the tightening
torque during assembly.
Places to be coated with
adhesives and lubricants etc.
Places where oil, water or fuel
must be added, and the
capacity.
Places where oil or water must
be drained, and quantity to be
drained.
1o-5 12-204
00-6
7. HOISTING INSTRUCTIONS
HOISTING INSTRUCTIONS
A Heavy parts (25 kg or more) must be
lifted with a hoist etc. In the Disassembly
and Assembly section, every part weigh-
ing 25 kg or more is indicated clearly with
the symbol &
1. If a part cannot be smoothly removed from
the machine by hoisting, the following
checks should be made:
. Check for removal of all bolts fastening
the part to the relative parts.
. Check for existence of another part
causing interference with the part to be
removed.
2. Wire ropes
11Use adequate ropes depending on the
weight of parts to be hoisted, referring to
the table below:
Wire ropes
(Standard “Z” or “S” twist ropes
without galvanizing)
Slinging near the edge of the hook may
cause the rope to slip off the hook during
hoisting, and a serious accident can result.
Hooks have maximum strength at the
middle portion.
I
!!VI!
100% 88% 79% 71% 41%
FSO064
3) Do not sling a heavy load with one rope
alone, but sling with two or more ropes
symmetrically wound on to the load.
A Slinging with one rope may cause
turning of the load during hoisting,
untwisting of the rope, or slipping of
the rope from its original winding
position on the load, which can result
in a dangerous accident.
4) Do not sling a heavy load with ropes
forming a wide hanging angle from the
hnnk
Rope diameter (mm) Allowable load (tons)
10 1.o
11.2 1.4
12.5 1.6
14 2.2
16 2.8
18 3.6
20 4.4
22.4 5.6
30 10.0
40 18.0
50 28.0
60 40.0
The allowable load value is estimated to
be one-sixth or one-seventh of the
breaking strength of the rope used.
2) Sling wire ropes from the middle portion
of the hook.
When hoisting a load with two or more
ropes, the force subjected to each rope
will increase with the hanging angles. The
table below shows the variation of
allowable load (kg) when hoisting is made
with two ropes, each of which is allowed
to sling up to 1000 kg vertically, at various
hanging angles.
When two ropes sling a load vertically, up
to 2000 kg of total weight can be
suspended. This weight becomes 1000 kg
when two ropes make a 120” hanging
angle. On the other hand, two ropes are
subjected to an excessive force as large as
4000 kg if they sling a 2000 kg load at a
lifting angle of 150”.
A
2000
1900
1700
?f-y&
a
1400
@
‘r 52
u,
.
,o
30” 60” 90” 120” 150”
Lifting angle : 0
FSO065
00-7
8. STANDARD TIGHTENING TORQUE
STANDARD TIGHTENING TORQUE
1. STANDARD TIGHTENING TORQUE OF BOLTS AND NUTS
The following charts give the standard tightening torques of bolts and nuts. Exceptions are given in
sections of “Disassembly and Assembly”.
Thread diameter Width
of bolt across flat
(mm) (mm)
kgm
6 10 1.35kO.15
8 13 3.2a0.3
10 17 6.7kO.7
12 19 11.5&1.0
14 22 18.Ok2.0
f
Nm
13.22 1.4
31.4IL2.9
65.726.8
112-+9.8
177*19
16 24 28.5r3 279*29
18 27 39-14 383-+39
20 30 56*6 549k58
22 32 7628 745*78
24 36 94.5r10 927298
27 41 135r15
30 46 175-+20
33 50 225+25
36 55 280&30
39 60 335*35
1320+140
1720&190
221Ok240
27502 290
3280*340
This torque table does not apply to the bolts with which nylon packings or other non-
ferrous metal washers are to be used, or which require tightening to otherwise specified
torque.
* Nm (newton meter): 1 Nm k 0.1 kgm
2.TlGHTENlNG TORQUE OF SPLIT FLANGE BOLTS
Use these torques for split flange bolts.
Threaodfg$yeter
(mm)
10
12
16
Width
across flats
(mm)
14
17
22
Tightening torque
kgm Nm
6.7kO.7 65.7k6.8
11.5&l 11229.8
28.5*3 279*29
00-8
9. STANDARD TIGHTENING TORQUE
Sealing surface
3.TlGHTENlNG TORQUE FOR NUTS OF FLARED
Use these torques for nut part of flared.
Thread diameter Width across flats
of nut part of nut part
(mm) (mm)
T
kgm
14 19 2.5kO.5
18 24 5&Z
22 27 8-t2
24 32 14k3
30 36 1823
33 41 20r5
36 46 25k5
42 55 30+-5
Tightening torque
COATING MATERIALS
-T-
Nm
I
24.5 24.9
49k19.6
78.5 +- 19.6
137.3t29.4
176.5k29.4
196.1 249
245.2 f49
294.2 +49
The recommended coating materials prescribed in Komatsu Shop Manuals are listed below.
Nomenclature
Adhesives
Komatsu code
LT-IA
LT-1 B
LT-2’
Applications
Used to apply rubber pads, rubber gaskets, and cork plugs.
Used to apply resin, rubber, metallic and
non-metallic parts when a fast, strong seal is needed.
Preventing bolts, nuts and plugs from loosening and leaking oil.
LT-3
Provides an airtight, electrically insulating seal.
Used for aluminum surfaces.
Sealant gasket
Antifriction compound
(Lubricant including
molybdenum disulfide)
Grease
(Lithium grease)
Vaseline
LT-4
LG-1
LG-3
LG-4
LG-5
LG-6
LG-7
LM-P
G2-LI
-
Used to coat plugs (plate shaped, bowl shaped) and holes, and
mating portion of shaft.
Used with gaskets and packings to increase sealing effect.
Heat-resistant gasket for precombustion chambers
and exhaust piping.
Used b itself on mounting surfaces on the final drive and transmission
cases. Thrckness after tightening: 0.07 - 0.08 mm)Y
Used by itself to seal grease fittings, tapered screw fittings and tapered
screw fittings in hydraulic circuits of less than 50 mm in diameter.
Silicon base type used in combination with LG-1 and LG-4.
Has a shorter curing time than LG-6, and is easier
to peel off.
Applied to bearings and taper shafts to facilitate press-fitting and to
prevent sticking, burning or rusting.
Applied to bearings, sliding parts and oil seals for lubrication, rust
prevention and facilitation of assembling work.
Used for protecting battery electrode terminals from corrosion.
‘LT-2 is also called LOCTITE in the shop manuals
00-9
10. ELECTRIC WIRE CODE
ELECTRIC WIRE CODE
In the wiring diagrams, various colors and symbols are employed to indicate the thickness of wires
This wire code table will help you understand WIRING DIAGRAMS.
Example: 5WB indicates a cable having a nominal number 5 and white coating with black stripe.
CLASSIFICATION BY THICKNESS
Nominal
number
0.85
2
Copper wire
Cable O.D. Current rating
Number Dia. of strands Cross section (mm) (A)
Applicable circuit
strands (mm) (mm?)
11 0.32 0.88 2.4 12 Starting, lighting, signal etc.
26 0.32 2.09 3.1 20 Lighting, signal etc.
5 65
I I I I
0.32 5.23 4.6 37 Charging and signal
15 84 0.45 13.36 7.0 59 Starting (Glow plug)
40 85 0.80 42.73 11.4 135 Starting
60 127 0.80 63.84 13.6 178 Starting
100 217 0.80 109.1
I
17.6 230 Starting
CLASSIFICATION BY COLOR AND CODE
Prior-
ity
2
5
6
Charging Ground Starting Lighting Instrument Signal Other
Pri-
Code W B B R Y G L
rnav Color White Black Black Red Yellow Green Blue
Code WR - BW RW YR GW LW
Color White& Red - Black &White Red &White Yellow & Red Green & White Blue &White
Code WB -
Auxi_ Color White&Black -
liary
Code WL -
Color White&Blue -
Code WG -
BY RB YB GR LR
Black &Yellow Red &Black Yellow & Black Green &Red Blue & Red
BR RY YG GY LY
Black & Red Red & Yellow Yellow &Green Green &Yellow Blue &Yellow
- RG YL (GB) (LB)
1 Color 1White &Green 1 - 1 - Red & Green 1 Yellow & Blue ) (Green & Black) 1 (Blue &Black)
Code - - - RL YW (GL) -
Color - Red & Blue Yellow & White (Green & Blue)
00-l0
11. CONVERSION TABLE
CONVERSION TABLE
Method of using the Conversion Table
The Conversion Table in this section is provided to enable simple conversion of figures. For details of the
method of using the Conversion Table, see the example given below.
Example
l Method of using the Conversion Table to convert from millimeters to inches
1, Convert 55 mm into inches.
(1)
12)
(3)
Locate the number 50 in the vertical column at the left side, take this as @, then draw a horizontal
line from @.
Locate the number 5 in the row across the top, take this as @J, then draw a perpendicular line
down from @.
Take the point where the two lines cross as 0. This point 0 gives the value when converting
from millimeters to inches. Therefore, 55 mm = 2.165 inches.
2. Convert 550 mm into inches.
(1) The number 550 does not appear in the table, so divide by 10 (move the decimal point one place
to the left) to convert it to 55 mm.
(2) Carry out the came procedure as above to convert 55 mm to 2.165 inches.
(3) The original value (550 mm) was divided by 10, so multiply 2.165 inches by 10 (move the decimal
point one place to the right) to return to the original value. This gives 550 mm = 21.65 inches.
(
5
Millimeters to inches 1 mm = 0.03937 in
1 2 3 6 7 8 90 4
0
IO
20
30
40
50_----_
60
70
80
90
0.039 0.079 0.118 0.157
0.433 0.472 0.512 0.551
0.827 0.866 0.906 0.945
1.220 1.260 1.299 1.339
1.614 1.654 1.693 1.732
2.008 2.047 2.087 2.126---_-_ -- __ - _ _ _---__ .-----
2.402 2.441 2.480 2.520
2.795 2.835 2.874 2.913
3.189 3.228 3.268 3.307
3.583 3.622 3.661 3.701
0.197
0.591
0.984
1.378
1.772
0
12.165
2.559
2.953
3.346
3.740
0.236 0.276 0.315 0.354
0.630 0.669 0.709 0.748
1.024 1.063 1.102 1.142
1.417 1.457 1.496 1.536
1.811 1.850 1.890 1.929
2.205 2.244 2.283 2.323
2.598 2.638 2.677 2.717
2.992 3.032 3.071 3.110
3.386 3.425 3.465 3.504
3.780 3.819 3.858 3.898
0.394
0.787
1.181
1.575
1.969---___
2.362
2.756
3.150
3.543
@-
__
00-l 1
12. ENGINE
II STRUCTURE AND FUNCTION
Radiator and cooler ........................ 1 I-2
Engine speed control ..................... 1 l-3- 1
Servo cylinder ............................. 11-4
Engine low idling select system .............. 1 1-7
WA800-1
13. RADIATOR AND COOLER
1. Radiator cap
2. Water level sensor
3. Fan guard
4. Upper tank
5. Radiator
6. Hydraulic oil cooler
Eng.oil
cooler
Thermostat
r--l
i ~
Radiator
A 6
427F0
Specification
Core type: Model G7
Total heat dissipating area: 201 .OO m2
Cross-sectional area of water tubes: 288.52 cm2
14
A. Oil inlet port
B. Oil outlet port
WA800-1
14. l WA800-2
1. Radiator cap
2. Water level sensor
3. Fan guard
4. Upper tank
5. Radiator
6. Hydraulic oil cooler
-----_
~hdiator j
I /I
k--__plp
550ehin
1 Hyd. ’
coolei
T/C cooler 450 Plmin
F4270200
Specification
Core type: Model G7
Total heat dissipating area: 201 .OO m2
Cross-sectional area of water tubes: 288.52 cm2
1
A. Oil inlet port
B. Oil outlet port
WA800-1 11-3
!5,
15. ENGINE SPEED CONTROL
l WASOO-1
View 2
427FOO6
1. Accelerator pedal
2. Cable
3. Servo cylinder
4. Injection pump
5. Absorber
6. Air cylinder
7. Transmission oil filler
WA800-1
16. l WA800-2
6
View Y
View Z
427FO1004
1. Accelerator pedal
2. Cable
3. Servo cylinder
4. Injection pump
5. Absorber
6. Air cylinder
7. Transmission oil filler
WA800-1
112-2
17. SERVO CYLINDER
1 A B 2 3 4 5
View Z
427FOO7
1. Rod
2. Spring
3. Body
4. Piston
5. Yoke
OUTLINE
l The servo cylinder is installed to the engine
linkage.
This acts to reduce the operating force without
changing the amount of movement of the accel-
erator pedal cable and injection pump rod.
A. Oil outlet port (Drain to transmission oil filler)
6. Oil inlet port (From oil filter)
11-4 WA800-1
18. OPERATION
1. Accelerator pedal not depressed
To TIC. TIM valve
Accelerator pedal (6) is not being depressed, so
the servo cylinder is not actuated.
The pressurized oil from the transmission filter
passes through the middle of rod (3) and flows
to port A.
2. Accelerator pedal depressed
T/M filter
427FOO9
When accelerator pedal (6) is depressed, cable
(7) moves rod (3) to the left in the direction of
the arrow.
The oil from the transmission filter flows from
port A through the hole in piston (2) and goes to
chamber B.
WA800-1 1l-5
19. Thank you very much for
your reading. Please Click
Here. Then Get COMPLETE
MANUAL. NO WAITING
NOTE:
If there is no response to
click on the link above,
please download the PDF
document first and then
click on it.
20. To TIC. TIM valve
427FOlO
When the oil flowing to chamber 6 reaches the
specified pressure, it overcomes the force of
spring (8) and moves piston (2) to the left.in the
direction of the arrow.
Piston (2) continues to move until the hole in
piston (2) is closed.
3. Accelerator pedal released
To T/C. TIM valve
As a result, the length of movement of rod (3)
becomes equal to the length of movement of the
piston, and the operating force is reduced by the
hydraulic pressure.
I
427FOll
When accelerator pedal (6) is released, cable (7)
moves rod (3) to the right in the direction of the
arrow.
As a result, the oil at chamber B is drained. When
this happens, piston (2) is moved to the right by
spring (8) until the hole in piston (2) is closed.
11-6 WA800-1
21. ENGINE LOW IDLING SELECT SYSTEM
OUTLINE
l By using the engine low idling selector device to
set the engine low idling speed to two stages, it
is possible to carry out operations more
eff icientiy.
OPERATION
Selector switch OFF
When the selector switch is OFF, no electric current
flows to solenoid valve (1). so the solenoid valve is
not actuated and the air supply to air cylinder (2) is
shut off. As a result, the air cylinder is not actuated
and the engine speed is set to 650 rpm.
l WA800-1
From dry
air tank
427FO12
9 WA800-2
From dry
air tank
427FO1005
WA800-1
22. Selector switch ON
When the selector switch is turned ON, electric cur-
rent flows to solenoid valve (I), and the solenoid
valve is actuated. Air flows to air cylinder (21, and the
air cylinder rod is pushed out by the air pressure. The
air cylinder rod is connected by a link to accelerator
pedal (3). so the accelerator pedal is depressed by an
amount equal to the movement of the rod. When this
happens, the engine speed is set to approximately
850 rpm.
. WA800-1
427FO13
l WASOO-2
427FO1006
WA800-1
23. ENGINE
12 TESTING AND ADJUSTING
Standard value table . . . . 12- 2
Tool list for testing and adjusting 12- 6
Adjusting valve clearance . . 12- 7
Measuring compression pressure 12- 9
Testing and adjusting fuel injection timing . 12-l 0
Measuring accelerator pedal operating force 12-I 3
Measuring accelerator pedal operating angle 12-I 7
* The following precautions are necessary when using the Standard Value Tables to make judgement during
troubleshooting or during testing and adjusting.
1. The values in these tables are based on the values for new machines leaving the plant, so they should be
used as target values when repairing or when estimating wear after a period of use.
2. The standard values in these tables for judgement when troubleshooting are estimated values based on
the standard values for the machine when shipped from the plant, and on the results of various tests.
Therefore, they should be used as reference in combination with repair and operating records when mark-
ing judgements.
3. These standard value tables must not be used for standard values when judging claims. In addition, do not
use these values alone to make simple judgements.
A When carrying out testing, adjusting or troubleshooting, stop the machine on level ground, insert the
safety pins and block the tires.
A When working in groups, use agreed signals and do not allow unauthorized persons near the machine.
A When checking the water level in the radiator wait for the water to cool. Do not remove the radiator
cap while the water is hot. Boiling water may spurt out.
A Be careful not to get caught in rotating parts.
WA800-1
‘%j’