This document is a 3-page shop manual for a Komatsu PC5500-6 hydraulic mining shovel with serial number 15011. It provides information for repair and maintenance of the specific machine. The manual notes that Komatsu's policy is to continuously improve its products and that revisions may be made to manuals. It recommends contacting the distributor for the latest revision. The copyright is 2006 and it was printed in the U.S. for Komatsu Mining Germany.

1. SMPC550015011
Shop
Manual
PC5500-6
HYDRAULIC MINING SHOVEL
SERIAL NUMBERS PC5500-6 15011
This material is proprietary to Komatsu Mining Germany GmbH and is not to be reproduced, used, or disclosed except
in accordance with written authorization from Komatsu Mining Germany GmbH.
It is our policy to improve our products whenever it is possible and practical to do so. We reserve the right to
make changes or improvements at any time without incurring any obligation to install such changes on products
sold previously.
Due to this continuous program of research and development, revisions may be made to this publication. It is
recommended that customers contact their distributor for information on the latest revision.
Copyright 2006 Komatsu
Printed in U.S.A.
Komatsu Mining Germany
August 2006

20. Thank you very much for
your reading. Please Click
Here. Then Get COMPLETE
MANUAL. NO WAITING
NOTE:
If there is no response to
click on the link above,
please download the PDF
document first and then
click on it.